Re: [PATCH v7] USB: serial: cp210x: Add support for GPIOs on CP2108

[Greg KH <gregkh@linuxfoundation.org>]

On Tue, Apr 06, 2021 at 11:02:38AM +0700, Pho Tran wrote:
> From: Pho Tran <pho.tran@silabs.com>
> 
> Similar to other CP210x devices, GPIO interfaces (gpiochip) should be
> supported for CP2108.
> 
> CP2108 has 4 serial interfaces but only 1 set of GPIO pins are shared
> to all of those interfaces. So, just need to initialize GPIOs of CP2108
> with only one interface (I use interface 0). It means just only 1 gpiochip
> device file will be created for CP2108.
> 
> CP2108 has 16 GPIOs, So data types of several variables need to be is u16
> instead of u8(in struct cp210x_serial_private). This doesn't affect other
> CP210x devices.
> 
> Because CP2108 has 16 GPIO pins, the parameter passed by cp210x functions
> will be different from other CP210x devices. So need to check part number
> of the device to use correct data format  before sending commands to
> devices.
> 
> Like CP2104, CP2108 have GPIO pins with configurable options. Therefore,
> should be mask all pins which are not in GPIO mode in cp2108_gpio_init()
> function.
> 
> Fix build test WARNING reported by kernel test robot.
> 
> Reported-by: Kernel test robot <lkp@intel.com>

The kernel test robot did not report this needed support :(