From: Johan Hovold <johan@kernel.org>
To: dillon.minfei@gmail.com
Cc: gregkh@linuxfoundation.org, jirislaby@kernel.org,
mcoquelin.stm32@gmail.com, alexandre.torgue@foss.st.com,
lkp@intel.com, linux-serial@vger.kernel.org,
linux-stm32@st-md-mailman.stormreply.com,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, kbuild-all@lists.01.org,
clang-built-linux@googlegroups.com,
Gerald Baeza <gerald.baeza@foss.st.com>,
Erwan Le Ray <erwan.leray@foss.st.com>
Subject: Re: [PATCH v2] serial: stm32: optimize spin lock usage
Date: Mon, 12 Apr 2021 15:08:14 +0200 [thread overview]
Message-ID: <YHRGPpQ03XgBMkiy@hovoldconsulting.com> (raw)
In-Reply-To: <1618219898-4600-1-git-send-email-dillon.minfei@gmail.com>
On Mon, Apr 12, 2021 at 05:31:38PM +0800, dillon.minfei@gmail.com wrote:
> From: dillon min <dillon.minfei@gmail.com>
>
> To avoid potential deadlock in spin_lock usage, use spin_lock_irqsave,
> spin_trylock_irqsave(), spin_unlock_irqrestore() in process context.
This doesn't make much sense as console_write can be called in any
context. And where's the deadlock you claim to be fixing here?
> remove unused local_irq_save/restore call.
>
> Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
> Cc: Gerald Baeza <gerald.baeza@foss.st.com>
> Cc: Erwan Le Ray <erwan.leray@foss.st.com>
> Reported-by: kernel test robot <lkp@intel.com>
> Signed-off-by: dillon min <dillon.minfei@gmail.com>
> ---
> v2: remove unused code from stm32_usart_threaded_interrupt() according from
> Greg's review.
>
> drivers/tty/serial/stm32-usart.c | 8 +++-----
> 1 file changed, 3 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/tty/serial/stm32-usart.c b/drivers/tty/serial/stm32-usart.c
> index b3675cf25a69..b1ba5e36e36e 100644
> --- a/drivers/tty/serial/stm32-usart.c
> +++ b/drivers/tty/serial/stm32-usart.c
> @@ -1354,13 +1354,12 @@ static void stm32_usart_console_write(struct console *co, const char *s,
> u32 old_cr1, new_cr1;
> int locked = 1;
>
> - local_irq_save(flags);
> if (port->sysrq)
> locked = 0;
> else if (oops_in_progress)
> - locked = spin_trylock(&port->lock);
> + locked = spin_trylock_irqsave(&port->lock, flags);
> else
> - spin_lock(&port->lock);
> + spin_lock_irqsave(&port->lock, flags);
>
> /* Save and disable interrupts, enable the transmitter */
> old_cr1 = readl_relaxed(port->membase + ofs->cr1);
> @@ -1374,8 +1373,7 @@ static void stm32_usart_console_write(struct console *co, const char *s,
> writel_relaxed(old_cr1, port->membase + ofs->cr1);
>
> if (locked)
> - spin_unlock(&port->lock);
> - local_irq_restore(flags);
> + spin_unlock_irqrestore(&port->lock, flags);
> }
>
> static int stm32_usart_console_setup(struct console *co, char *options)
Johan
next prev parent reply other threads:[~2021-04-12 13:08 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-04-12 9:31 [PATCH v2] serial: stm32: optimize spin lock usage dillon.minfei
2021-04-12 13:08 ` Johan Hovold [this message]
2021-04-12 14:04 ` dillon min
2021-04-12 23:44 ` dillon min
2021-04-15 17:09 ` Erwan LE RAY
2021-04-16 0:06 ` Hua Dillon
2021-04-16 8:51 ` Johan Hovold
2021-04-16 8:35 ` Johan Hovold
2021-04-16 8:56 ` dillon min
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=YHRGPpQ03XgBMkiy@hovoldconsulting.com \
--to=johan@kernel.org \
--cc=alexandre.torgue@foss.st.com \
--cc=clang-built-linux@googlegroups.com \
--cc=dillon.minfei@gmail.com \
--cc=erwan.leray@foss.st.com \
--cc=gerald.baeza@foss.st.com \
--cc=gregkh@linuxfoundation.org \
--cc=jirislaby@kernel.org \
--cc=kbuild-all@lists.01.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-serial@vger.kernel.org \
--cc=linux-stm32@st-md-mailman.stormreply.com \
--cc=lkp@intel.com \
--cc=mcoquelin.stm32@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox