Re: [PATCH] staging: media: atomisp: pci: reposition braces as per coding style

[Deepak R Varma <drv@mailo.com>]

On Fri, Apr 30, 2021 at 07:33:27PM +0300, Sakari Ailus wrote:
> Hi Deepak,
> 
> If you're touching all these lines, I might do a little more. Please see
> the comments below.
> 
Hello Sakari,
I can definitely include other changes, but then it will be many different
types of changes into a single patch. Will that be okay?

I was planning to address one issue per patch as I think the volume of
change is going to be high.  I mentioned that in the notes section of the patch
message.

Let me know if you still suggest I combine those.

Thank you,
deepak.



> On Fri, Apr 30, 2021 at 09:10:12PM +0530, Deepak R Varma wrote:
> > Misplaced braces makes it difficult to follow the code easily. This also
> > goes against the code style guidelines. This resolved following checkpatch
> > complaints:
> > 
> > ERROR: open brace '{' following function definitions go on the next line
> > ERROR: that open brace { should be on the previous line
> > 
> > Signed-off-by: Deepak R Varma <drv@mailo.com>
> > ---
> > 
> > Please Note: There are several other checkpatch triggered warnings and
> > errors that should be addressed in separate patches.
> > 
> > 
> >  .../staging/media/atomisp/pci/atomisp_csi2.c  |   3 +-
> >  .../staging/media/atomisp/pci/sh_css_mipi.c   |  69 +++----
> >  .../staging/media/atomisp/pci/sh_css_params.c | 171 ++++++++----------
> >  drivers/staging/media/atomisp/pci/sh_css_sp.c | 108 +++++------
> >  .../media/atomisp/pci/sh_css_version.c        |   3 +-
> >  5 files changed, 157 insertions(+), 197 deletions(-)
> > 
> > diff --git a/drivers/staging/media/atomisp/pci/atomisp_csi2.c b/drivers/staging/media/atomisp/pci/atomisp_csi2.c
> > index 060b8765ae96..200f16994f3a 100644
> > --- a/drivers/staging/media/atomisp/pci/atomisp_csi2.c
> > +++ b/drivers/staging/media/atomisp/pci/atomisp_csi2.c
> > @@ -29,7 +29,8 @@ static struct v4l2_mbus_framefmt *__csi2_get_format(struct
> >  	v4l2_subdev_pad_config *cfg,
> >  	enum
> >  	v4l2_subdev_format_whence
> 
> You could have more arguments on the same line up to 80 characters per
> line.
> 
> > -	which, unsigned int pad) {
> > +	which, unsigned int pad)
> > +{
> >  	if (which == V4L2_SUBDEV_FORMAT_TRY)
> >  		return v4l2_subdev_get_try_format(&csi2->subdev, cfg, pad);
> >  	else
> > diff --git a/drivers/staging/media/atomisp/pci/sh_css_mipi.c b/drivers/staging/media/atomisp/pci/sh_css_mipi.c
> > index 3f34cc81be87..75489f7d75ee 100644
> > --- a/drivers/staging/media/atomisp/pci/sh_css_mipi.c
> > +++ b/drivers/staging/media/atomisp/pci/sh_css_mipi.c
> > @@ -91,7 +91,8 @@ ia_css_mipi_frame_calculate_size(const unsigned int width,
> >  				 const enum atomisp_input_format format,
> >  				 const bool hasSOLandEOL,
> >  				 const unsigned int embedded_data_size_words,
> > -				 unsigned int *size_mem_words) {
> > +				 unsigned int *size_mem_words)
> > +{
> >  	int err = 0;
> >  
> >  	unsigned int bits_per_pixel = 0;
> > @@ -118,8 +119,7 @@ ia_css_mipi_frame_calculate_size(const unsigned int width,
> >  	IA_CSS_ENTER("padded_width=%d, height=%d, format=%d, hasSOLandEOL=%d, embedded_data_size_words=%d\n",
> >  		     width_padded, height, format, hasSOLandEOL, embedded_data_size_words);
> >  
> > -	switch (format)
> > -	{
> > +	switch (format) {
> >  	case ATOMISP_INPUT_FORMAT_RAW_6:		/* 4p, 3B, 24bits */
> >  		bits_per_pixel = 6;
> >  		break;
> > @@ -178,12 +178,10 @@ ia_css_mipi_frame_calculate_size(const unsigned int width,
> >  	/* Even lines for YUV420 formats are double in bits_per_pixel. */
> >  	if (format == ATOMISP_INPUT_FORMAT_YUV420_8
> >  	    || format == ATOMISP_INPUT_FORMAT_YUV420_10
> > -	    || format == ATOMISP_INPUT_FORMAT_YUV420_16)
> > -	{
> > +	    || format == ATOMISP_INPUT_FORMAT_YUV420_16) {
> >  		even_line_bytes = (width_padded * 2 * bits_per_pixel + 7) >>
> >  			3; /* ceil ( bits per line / 8) */
> > -	} else
> > -	{
> > +	} else {
> >  		even_line_bytes = odd_line_bytes;
> >  	}
> >  
> > @@ -236,7 +234,8 @@ ia_css_mipi_frame_calculate_size(const unsigned int width,
> >  #if !defined(ISP2401)
> >  int
> >  ia_css_mipi_frame_enable_check_on_size(const enum mipi_port_id port,
> > -				       const unsigned int	size_mem_words) {
> > +				       const unsigned int	size_mem_words)
> 
> Tab after int, should be a space.
> 
> > +{
> >  	u32 idx;
> >  
> >  	int err = -EBUSY;
> > @@ -246,11 +245,9 @@ ia_css_mipi_frame_enable_check_on_size(const enum mipi_port_id port,
> >  
> >  	for (idx = 0; idx < IA_CSS_MIPI_SIZE_CHECK_MAX_NOF_ENTRIES_PER_PORT &&
> >  	     my_css.mipi_sizes_for_check[port][idx] != 0;
> > -	     idx++)   /* do nothing */
> > -	{
> > +	     idx++) { /* do nothing */
> >  	}
> 
> A semicolon suffices here. I guess this could be also written as:
> 
> 	for (idx = 0; idx < ... & ... != 0; )
> 		idx++;
> 
> As it's easy to just miss the semicolon at the end of the for loop.
> 
> > -	if (idx < IA_CSS_MIPI_SIZE_CHECK_MAX_NOF_ENTRIES_PER_PORT)
> > -	{
> > +	if (idx < IA_CSS_MIPI_SIZE_CHECK_MAX_NOF_ENTRIES_PER_PORT) {
> >  		my_css.mipi_sizes_for_check[port][idx] = size_mem_words;
> >  		err = 0;
> >  	}
> > @@ -271,7 +268,8 @@ mipi_init(void)
> >  int
> >  calculate_mipi_buff_size(
> >      struct ia_css_stream_config *stream_cfg,
> > -    unsigned int *size_mem_words) {
> > +    unsigned int *size_mem_words)
> 
> I think both arguments might fit on the same line. If not, then the return
> type (int) does. I think there are other similar cases.
> 
> > +{
> >  #if !defined(ISP2401)
> >  	int err = -EINVAL;
> >  	(void)stream_cfg;
> > @@ -346,12 +344,10 @@ calculate_mipi_buff_size(
> >  
> >  	/* Even lines for YUV420 formats are double in bits_per_pixel. */
> >  	if (format == ATOMISP_INPUT_FORMAT_YUV420_8
> > -	    || format == ATOMISP_INPUT_FORMAT_YUV420_10)
> > -	{
> > +	    || format == ATOMISP_INPUT_FORMAT_YUV420_10) {
> >  		even_line_bytes = (width_padded * 2 * bits_per_pixel + 7) >>
> >  			3; /* ceil ( bits per line / 8) */
> 
> You don't need braces here.
> 
> > -	} else
> > -	{
> > +	} else {
> >  		even_line_bytes = odd_line_bytes;
> >  	}
> >  
> > @@ -393,7 +389,8 @@ static bool buffers_needed(struct ia_css_pipe *pipe)
> >  
> >  int
> >  allocate_mipi_frames(struct ia_css_pipe *pipe,
> > -		     struct ia_css_stream_info *info) {
> > +		     struct ia_css_stream_info *info)
> > +{
> >  	int err = -EINVAL;
> >  	unsigned int port;
> >  
> > @@ -402,8 +399,7 @@ allocate_mipi_frames(struct ia_css_pipe *pipe,
> >  
> >  	assert(pipe);
> >  	assert(pipe->stream);
> > -	if ((!pipe) || (!pipe->stream))
> > -	{
> > +	if ((!pipe) || (!pipe->stream)) {
> 
> Extra parentheses.
> 
> -- 
> Kind regards,
> 
> Sakari Ailus