From: Greg KH <gregkh@linuxfoundation.org>
To: Qiang Ma <maqianga@uniontech.com>
Cc: jikos@kernel.org, benjamin.tissoires@redhat.com,
linux-usb@vger.kernel.org, linux-input@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH] HID: usbhid: enable remote wakeup for mouse
Date: Mon, 17 May 2021 10:58:11 +0200 [thread overview]
Message-ID: <YKIwIwx+nLyX/9LG@kroah.com> (raw)
In-Reply-To: <20210517060145.32359-1-maqianga@uniontech.com>
On Mon, May 17, 2021 at 02:01:45PM +0800, Qiang Ma wrote:
> This patch enables remote wakeup by default for USB mouse
> devices. Mouse in general are supposed to be wakeup devices, but
> the correct place to enable it depends on the device's bus; no single
> approach will work for all mouse devices. In particular, this
> covers only USB mouse (and then only those supporting the boot
> protocol).
>
> Signed-off-by: Qiang Ma <maqianga@uniontech.com>
Based on hardware testing, I do not think we can do this as no other
operating system does this, right? It's not a requirement of the USB
specification to support this, so we can not enforce it either.
> ---
> drivers/hid/usbhid/hid-core.c | 12 +++++++-----
> drivers/hid/usbhid/usbmouse.c | 1 +
> 2 files changed, 8 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/hid/usbhid/hid-core.c b/drivers/hid/usbhid/hid-core.c
> index 86257ce6d619..592aa57a97f5 100644
> --- a/drivers/hid/usbhid/hid-core.c
> +++ b/drivers/hid/usbhid/hid-core.c
> @@ -1186,11 +1186,13 @@ static int usbhid_start(struct hid_device *hid)
> * In addition, enable remote wakeup by default for all keyboard
> * devices supporting the boot protocol.
> */
> - if (interface->desc.bInterfaceSubClass == USB_INTERFACE_SUBCLASS_BOOT &&
> - interface->desc.bInterfaceProtocol ==
> - USB_INTERFACE_PROTOCOL_KEYBOARD) {
> - usbhid_set_leds(hid);
> - device_set_wakeup_enable(&dev->dev, 1);
> + if (interface->desc.bInterfaceSubClass == USB_INTERFACE_SUBCLASS_BOOT) {
> + if (interface->desc.bInterfaceProtocol == USB_INTERFACE_PROTOCOL_KEYBOARD ||
> + interface->desc.bInterfaceProtocol == USB_INTERFACE_PROTOCOL_MOUSE) {
> + if (interface->desc.bInterfaceProtocol == USB_INTERFACE_PROTOCOL_KEYBOARD)
> + usbhid_set_leds(hid);
> + device_set_wakeup_enable(&dev->dev, 1);
> + }
> }
>
> mutex_unlock(&usbhid->mutex);
> diff --git a/drivers/hid/usbhid/usbmouse.c b/drivers/hid/usbhid/usbmouse.c
> index 073127e65ac1..cf785369a5ed 100644
> --- a/drivers/hid/usbhid/usbmouse.c
> +++ b/drivers/hid/usbhid/usbmouse.c
> @@ -188,6 +188,7 @@ static int usb_mouse_probe(struct usb_interface *intf, const struct usb_device_i
> goto fail3;
>
> usb_set_intfdata(intf, mouse);
> + device_set_wakeup_enable(&dev->dev, 1);
> return 0;
>
> fail3:
> --
> 2.20.1
How many different devices did you test this on?
thanks,
greg k-h
next prev parent reply other threads:[~2021-05-17 8:58 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-05-17 6:01 [PATCH] HID: usbhid: enable remote wakeup for mouse Qiang Ma
2021-05-17 8:31 ` Oliver Neukum
2021-05-17 13:32 ` Alan Stern
[not found] ` <1209199573.51584.1621492845444.JavaMail.xmail@bj-wm-cp-1>
2021-05-25 9:55 ` Oliver Neukum
2021-05-17 8:58 ` Greg KH [this message]
[not found] ` <1547909475.114060.1621244274064.JavaMail.xmail@bj-wm-cp-4>
2021-05-17 9:46 ` Greg KH
[not found] ` <1781917892.119659.1621247946603.JavaMail.xmail@bj-wm-cp-4>
2021-05-17 10:42 ` Greg KH
[not found] ` <440071991.120491.1621248757251.JavaMail.xmail@bj-wm-cp-4>
2021-05-17 11:19 ` Greg KH
[not found] ` <671637326.122188.1621250895330.JavaMail.xmail@bj-wm-cp-4>
2021-05-17 11:44 ` Greg KH
-- strict thread matches above, loose matches on Subject: below --
2024-05-22 9:22 huanglei814
2024-05-22 10:00 ` Oliver Neukum
2024-05-24 3:14 ` huanglei
2024-05-22 11:23 ` Greg KH
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=YKIwIwx+nLyX/9LG@kroah.com \
--to=gregkh@linuxfoundation.org \
--cc=benjamin.tissoires@redhat.com \
--cc=jikos@kernel.org \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=maqianga@uniontech.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox