public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Stephan Gerhold <stephan@gerhold.net>
To: Vincent Knecht <vincent.knecht@mailoo.org>
Cc: Mark Brown <broonie@kernel.org>,
	phone-devel@vger.kernel.org,
	~postmarketos/upstreaming@lists.sr.ht,
	Liam Girdwood <lgirdwood@gmail.com>,
	Rob Herring <robh+dt@kernel.org>,
	Jaroslav Kysela <perex@perex.cz>, Takashi Iwai <tiwai@suse.com>,
	alsa-devel@alsa-project.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH v1 4/4] ASoC: codecs: tfa989x: Add support for optional vddd-supply
Date: Fri, 28 May 2021 13:54:58 +0200	[thread overview]
Message-ID: <YLDaEnjGmCHrUMiz@gerhold.net> (raw)
In-Reply-To: <20210528105101.508254-4-vincent.knecht@mailoo.org>

On Fri, May 28, 2021 at 12:51:01PM +0200, Vincent Knecht wrote:
> Allow specifying Vddd regulator/supply to be enabled on I2C probing.
> 
> Signed-off-by: Vincent Knecht <vincent.knecht@mailoo.org>

Reviewed-by: Stephan Gerhold <stephan@gerhold.net>

> ---
>  sound/soc/codecs/tfa989x.c | 34 ++++++++++++++++++++++++++++++++++
>  1 file changed, 34 insertions(+)
> 
> diff --git a/sound/soc/codecs/tfa989x.c b/sound/soc/codecs/tfa989x.c
> index 6d94865c534b..643b45188b6f 100644
> --- a/sound/soc/codecs/tfa989x.c
> +++ b/sound/soc/codecs/tfa989x.c
> @@ -10,6 +10,7 @@
>  #include <linux/i2c.h>
>  #include <linux/module.h>
>  #include <linux/regmap.h>
> +#include <linux/regulator/consumer.h>
>  #include <sound/soc.h>
>  
>  #define TFA989X_STATUSREG		0x00
> @@ -51,6 +52,10 @@ struct tfa989x_rev {
>  	int (*init)(struct regmap *regmap);
>  };
>  
> +struct tfa989x {
> +	struct regulator *vddd_supply;
> +};
> +
>  static bool tfa989x_writeable_reg(struct device *dev, unsigned int reg)
>  {
>  	return reg > TFA989X_REVISIONNUMBER;
> @@ -242,10 +247,18 @@ static int tfa989x_dsp_bypass(struct regmap *regmap)
>  				 BIT(TFA989X_SYS_CTRL_AMPC));
>  }
>  
> +static void tfa989x_regulator_disable(void *data)
> +{
> +	struct tfa989x *tfa989x = data;
> +
> +	regulator_disable(tfa989x->vddd_supply);
> +}
> +
>  static int tfa989x_i2c_probe(struct i2c_client *i2c)
>  {
>  	struct device *dev = &i2c->dev;
>  	const struct tfa989x_rev *rev;
> +	struct tfa989x *tfa989x;
>  	struct regmap *regmap;
>  	unsigned int val;
>  	int ret;
> @@ -256,10 +269,31 @@ static int tfa989x_i2c_probe(struct i2c_client *i2c)
>  		return -ENODEV;
>  	}
>  
> +	tfa989x = devm_kzalloc(dev, sizeof(*tfa989x), GFP_KERNEL);
> +	if (!tfa989x)
> +		return -ENOMEM;
> +
> +	i2c_set_clientdata(i2c, tfa989x);
> +
> +	tfa989x->vddd_supply = devm_regulator_get(dev, "vddd");
> +	if (IS_ERR(tfa989x->vddd_supply))
> +		return dev_err_probe(dev, PTR_ERR(tfa989x->vddd_supply),
> +				     "Failed to get vddd regulator\n");
> +
>  	regmap = devm_regmap_init_i2c(i2c, &tfa989x_regmap);
>  	if (IS_ERR(regmap))
>  		return PTR_ERR(regmap);
>  
> +	ret = regulator_enable(tfa989x->vddd_supply);
> +	if (ret) {
> +		dev_err(dev, "Failed to enable vddd regulator: %d\n", ret);
> +		return ret;
> +	}
> +
> +	ret = devm_add_action_or_reset(dev, tfa989x_regulator_disable, tfa989x);
> +	if (ret)
> +		return ret;
> +
>  	/* Bypass regcache for reset and init sequence */
>  	regcache_cache_bypass(regmap, true);
>  
> -- 
> 2.31.1
> 
> 
> 

  reply	other threads:[~2021-05-28 11:55 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-05-28 10:50 [PATCH v1 1/4] ASoC: dt-bindings: nxp,tfa989x: Add tfa9897 support Vincent Knecht
2021-05-28 10:50 ` [PATCH v1 2/4] ASoC: codecs: tfa989x: Add support for tfa9897 Vincent Knecht
2021-05-28 11:53   ` Stephan Gerhold
2021-05-28 10:51 ` [PATCH v1 3/4] ASoC: dt-bindings: nxp,tfa989x: Add vddd-supply property Vincent Knecht
2021-05-28 10:51 ` [PATCH v1 4/4] ASoC: codecs: tfa989x: Add support for optional vddd-supply Vincent Knecht
2021-05-28 11:54   ` Stephan Gerhold [this message]
2021-05-28 11:40 ` [PATCH v1 1/4] ASoC: dt-bindings: nxp,tfa989x: Add tfa9897 support Stephan Gerhold
2021-06-02 16:16 ` Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=YLDaEnjGmCHrUMiz@gerhold.net \
    --to=stephan@gerhold.net \
    --cc=alsa-devel@alsa-project.org \
    --cc=broonie@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=lgirdwood@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=perex@perex.cz \
    --cc=phone-devel@vger.kernel.org \
    --cc=robh+dt@kernel.org \
    --cc=tiwai@suse.com \
    --cc=vincent.knecht@mailoo.org \
    --cc=~postmarketos/upstreaming@lists.sr.ht \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox