From: Heikki Krogerus <heikki.krogerus@linux.intel.com>
To: Badhri Jagan Sridharan <badhri@google.com>
Cc: Guenter Roeck <linux@roeck-us.net>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org,
Kyle Tso <kyletso@google.com>,
stable@vger.kernel.org
Subject: Re: [PATCH v1] usb: typec: tcpci: Fix up sink disconnect thresholds for PD
Date: Wed, 16 Jun 2021 16:40:38 +0300 [thread overview]
Message-ID: <YMn/Vu13ApE1t024@kuha.fi.intel.com> (raw)
In-Reply-To: <20210615174323.1160132-1-badhri@google.com>
On Tue, Jun 15, 2021 at 10:43:23AM -0700, Badhri Jagan Sridharan wrote:
> "Table 4-3 VBUS Sink Characteristics" of "Type-C Cable and Connector
> Specification" defines the disconnect voltage thresholds of various
> configurations. This change fixes the disconnect threshold voltage
> calculation based on vSinkPD_min and vSinkDisconnectPD as defined
> by the table.
>
> Fixes: e1a97bf80a022 ("usb: typec: tcpci: Implement Auto discharge disconnect callbacks")
> Signed-off-by: Badhri Jagan Sridharan <badhri@google.com>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
> ---
> drivers/usb/typec/tcpm/tcpci.c | 18 ++++++++++++------
> 1 file changed, 12 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/usb/typec/tcpm/tcpci.c b/drivers/usb/typec/tcpm/tcpci.c
> index 22862345d1ab..9858716698df 100644
> --- a/drivers/usb/typec/tcpm/tcpci.c
> +++ b/drivers/usb/typec/tcpm/tcpci.c
> @@ -21,8 +21,12 @@
> #define PD_RETRY_COUNT_DEFAULT 3
> #define PD_RETRY_COUNT_3_0_OR_HIGHER 2
> #define AUTO_DISCHARGE_DEFAULT_THRESHOLD_MV 3500
> -#define AUTO_DISCHARGE_PD_HEADROOM_MV 850
> -#define AUTO_DISCHARGE_PPS_HEADROOM_MV 1250
> +#define VSINKPD_MIN_IR_DROP_MV 750
> +#define VSRC_NEW_MIN_PERCENT 95
> +#define VSRC_VALID_MIN_MV 500
> +#define VPPS_NEW_MIN_PERCENT 95
> +#define VPPS_VALID_MIN_MV 100
> +#define VSINKDISCONNECT_PD_MIN_PERCENT 90
>
> #define tcpc_presenting_rd(reg, cc) \
> (!(TCPC_ROLE_CTRL_DRP & (reg)) && \
> @@ -351,11 +355,13 @@ static int tcpci_set_auto_vbus_discharge_threshold(struct tcpc_dev *dev, enum ty
> threshold = AUTO_DISCHARGE_DEFAULT_THRESHOLD_MV;
> } else if (mode == TYPEC_PWR_MODE_PD) {
> if (pps_active)
> - threshold = (95 * requested_vbus_voltage_mv / 100) -
> - AUTO_DISCHARGE_PD_HEADROOM_MV;
> + threshold = ((VPPS_NEW_MIN_PERCENT * requested_vbus_voltage_mv / 100) -
> + VSINKPD_MIN_IR_DROP_MV - VPPS_VALID_MIN_MV) *
> + VSINKDISCONNECT_PD_MIN_PERCENT / 100;
> else
> - threshold = (95 * requested_vbus_voltage_mv / 100) -
> - AUTO_DISCHARGE_PPS_HEADROOM_MV;
> + threshold = ((VSRC_NEW_MIN_PERCENT * requested_vbus_voltage_mv / 100) -
> + VSINKPD_MIN_IR_DROP_MV - VSRC_VALID_MIN_MV) *
> + VSINKDISCONNECT_PD_MIN_PERCENT / 100;
> } else {
> /* 3.5V for non-pd sink */
> threshold = AUTO_DISCHARGE_DEFAULT_THRESHOLD_MV;
> --
> 2.32.0.272.g935e593368-goog
--
heikki
prev parent reply other threads:[~2021-06-16 13:41 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-06-15 17:43 [PATCH v1] usb: typec: tcpci: Fix up sink disconnect thresholds for PD Badhri Jagan Sridharan
2021-06-16 13:40 ` Heikki Krogerus [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=YMn/Vu13ApE1t024@kuha.fi.intel.com \
--to=heikki.krogerus@linux.intel.com \
--cc=badhri@google.com \
--cc=gregkh@linuxfoundation.org \
--cc=kyletso@google.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox