[PATCH 1/3] drm: rcar-du: Sort the DU outputs

[PATCH 1/3] drm: rcar-du: Sort the DU outputs

[Kieran Bingham]

From: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>

Sort the DU outputs alphabetically, with the exception of the final
entry which is there as a sentinal.

Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
---
 drivers/gpu/drm/rcar-du/rcar_du_crtc.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/rcar-du/rcar_du_crtc.h b/drivers/gpu/drm/rcar-du/rcar_du_crtc.h
index 5f2940c42225..440e6b4fbb58 100644
--- a/drivers/gpu/drm/rcar-du/rcar_du_crtc.h
+++ b/drivers/gpu/drm/rcar-du/rcar_du_crtc.h
@@ -96,10 +96,10 @@ struct rcar_du_crtc_state {
 enum rcar_du_output {
 	RCAR_DU_OUTPUT_DPAD0,
 	RCAR_DU_OUTPUT_DPAD1,
-	RCAR_DU_OUTPUT_LVDS0,
-	RCAR_DU_OUTPUT_LVDS1,
 	RCAR_DU_OUTPUT_HDMI0,
 	RCAR_DU_OUTPUT_HDMI1,
+	RCAR_DU_OUTPUT_LVDS0,
+	RCAR_DU_OUTPUT_LVDS1,
 	RCAR_DU_OUTPUT_TCON,
 	RCAR_DU_OUTPUT_MAX,
 };
-- 
2.30.2

Re: [PATCH 1/3] drm: rcar-du: Sort the DU outputs

[Laurent Pinchart]

Hi Kieran,

Thank you for the patch.

On Wed, Jun 23, 2021 at 12:20:22AM +0100, Kieran Bingham wrote:
> From: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
> 
> Sort the DU outputs alphabetically, with the exception of the final
> entry which is there as a sentinal.
> 
> Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

> ---
>  drivers/gpu/drm/rcar-du/rcar_du_crtc.h | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/gpu/drm/rcar-du/rcar_du_crtc.h b/drivers/gpu/drm/rcar-du/rcar_du_crtc.h
> index 5f2940c42225..440e6b4fbb58 100644
> --- a/drivers/gpu/drm/rcar-du/rcar_du_crtc.h
> +++ b/drivers/gpu/drm/rcar-du/rcar_du_crtc.h
> @@ -96,10 +96,10 @@ struct rcar_du_crtc_state {
>  enum rcar_du_output {
>  	RCAR_DU_OUTPUT_DPAD0,
>  	RCAR_DU_OUTPUT_DPAD1,
> -	RCAR_DU_OUTPUT_LVDS0,
> -	RCAR_DU_OUTPUT_LVDS1,
>  	RCAR_DU_OUTPUT_HDMI0,
>  	RCAR_DU_OUTPUT_HDMI1,
> +	RCAR_DU_OUTPUT_LVDS0,
> +	RCAR_DU_OUTPUT_LVDS1,
>  	RCAR_DU_OUTPUT_TCON,
>  	RCAR_DU_OUTPUT_MAX,
>  };

-- 
Regards,

Laurent Pinchart

[PATCH 2/3] drm: rcar-du: Only initialise TVM_TVSYNC mode when supported

[Kieran Bingham]

From: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>

The R-Car DU as found on the D3, E3, and V3U do not have support
for an external synchronisation method.

In these cases, the dsysr cached register should not be initialised
in DSYSR_TVM_TVSYNC, but instead should be left clear to configure as
DSYSR_TVM_MASTER by default.

Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
---
 drivers/gpu/drm/rcar-du/rcar_du_crtc.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/rcar-du/rcar_du_crtc.c b/drivers/gpu/drm/rcar-du/rcar_du_crtc.c
index ea7e39d03545..cff0d82b9491 100644
--- a/drivers/gpu/drm/rcar-du/rcar_du_crtc.c
+++ b/drivers/gpu/drm/rcar-du/rcar_du_crtc.c
@@ -1243,7 +1243,10 @@ int rcar_du_crtc_create(struct rcar_du_group *rgrp, unsigned int swindex,
 	rcrtc->group = rgrp;
 	rcrtc->mmio_offset = mmio_offsets[hwindex];
 	rcrtc->index = hwindex;
-	rcrtc->dsysr = (rcrtc->index % 2 ? 0 : DSYSR_DRES) | DSYSR_TVM_TVSYNC;
+	rcrtc->dsysr = (rcrtc->index % 2 ? 0 : DSYSR_DRES);
+
+	if (rcar_du_has(rcdu, RCAR_DU_FEATURE_TVM_SYNC))
+		rcrtc->dsysr |= DSYSR_TVM_TVSYNC;
 
 	if (rcar_du_has(rcdu, RCAR_DU_FEATURE_VSP1_SOURCE))
 		primary = &rcrtc->vsp->planes[rcrtc->vsp_pipe].plane;
-- 
2.30.2

Re: [PATCH 2/3] drm: rcar-du: Only initialise TVM_TVSYNC mode when supported

[Laurent Pinchart]

Hi Kieran,

Thank you for the patch.

On Wed, Jun 23, 2021 at 12:20:23AM +0100, Kieran Bingham wrote:
> From: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
> 
> The R-Car DU as found on the D3, E3, and V3U do not have support
> for an external synchronisation method.
> 
> In these cases, the dsysr cached register should not be initialised
> in DSYSR_TVM_TVSYNC, but instead should be left clear to configure as
> DSYSR_TVM_MASTER by default.
> 
> Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
> ---
>  drivers/gpu/drm/rcar-du/rcar_du_crtc.c | 5 ++++-
>  1 file changed, 4 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/gpu/drm/rcar-du/rcar_du_crtc.c b/drivers/gpu/drm/rcar-du/rcar_du_crtc.c
> index ea7e39d03545..cff0d82b9491 100644
> --- a/drivers/gpu/drm/rcar-du/rcar_du_crtc.c
> +++ b/drivers/gpu/drm/rcar-du/rcar_du_crtc.c
> @@ -1243,7 +1243,10 @@ int rcar_du_crtc_create(struct rcar_du_group *rgrp, unsigned int swindex,
>  	rcrtc->group = rgrp;
>  	rcrtc->mmio_offset = mmio_offsets[hwindex];
>  	rcrtc->index = hwindex;
> -	rcrtc->dsysr = (rcrtc->index % 2 ? 0 : DSYSR_DRES) | DSYSR_TVM_TVSYNC;
> +	rcrtc->dsysr = (rcrtc->index % 2 ? 0 : DSYSR_DRES);

You can drop the parentheses.

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

> +
> +	if (rcar_du_has(rcdu, RCAR_DU_FEATURE_TVM_SYNC))
> +		rcrtc->dsysr |= DSYSR_TVM_TVSYNC;
>  
>  	if (rcar_du_has(rcdu, RCAR_DU_FEATURE_VSP1_SOURCE))
>  		primary = &rcrtc->vsp->planes[rcrtc->vsp_pipe].plane;

-- 
Regards,

Laurent Pinchart

[PATCH 3/3] drm: rcar-du: Add r8a779a0 device support

[Kieran Bingham]

From: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>

Extend the rcar_du_device_info structure and rcar_du_output enum to
support DSI outputs and utilise these additions to provide support for
the R8A779A0 V3U platform.

Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
---
 drivers/gpu/drm/rcar-du/rcar_du_crtc.c    | 20 ++++++++++++++++++++
 drivers/gpu/drm/rcar-du/rcar_du_crtc.h    |  2 ++
 drivers/gpu/drm/rcar-du/rcar_du_drv.c     | 21 +++++++++++++++++++++
 drivers/gpu/drm/rcar-du/rcar_du_drv.h     |  6 ++++++
 drivers/gpu/drm/rcar-du/rcar_du_encoder.c |  4 ++++
 drivers/gpu/drm/rcar-du/rcar_du_group.c   |  2 ++
 6 files changed, 55 insertions(+)

diff --git a/drivers/gpu/drm/rcar-du/rcar_du_crtc.c b/drivers/gpu/drm/rcar-du/rcar_du_crtc.c
index cff0d82b9491..edc46a96df6b 100644
--- a/drivers/gpu/drm/rcar-du/rcar_du_crtc.c
+++ b/drivers/gpu/drm/rcar-du/rcar_du_crtc.c
@@ -31,6 +31,7 @@
 #include "rcar_du_regs.h"
 #include "rcar_du_vsp.h"
 #include "rcar_lvds.h"
+#include "rcar_mipi_dsi.h"
 
 static u32 rcar_du_crtc_read(struct rcar_du_crtc *rcrtc, u32 reg)
 {
@@ -737,6 +738,16 @@ static void rcar_du_crtc_atomic_enable(struct drm_crtc *crtc,
 		rcar_lvds_clk_enable(bridge, mode->clock * 1000);
 	}
 
+	/*
+	 * On V3U the dot clock is provided by the MIPI DSI encoder which is
+	 * attached to DU. So, the MIPI DSI module should be enable before starting DU.
+	 */
+	if (rcdu->info->dsi_clk_mask & BIT(rcrtc->index)) {
+		struct drm_bridge *bridge = rcdu->dsi[rcrtc->index];
+
+		rcar_mipi_dsi_clk_enable(bridge);
+	}
+
 	rcar_du_crtc_start(rcrtc);
 
 	/*
@@ -770,6 +781,15 @@ static void rcar_du_crtc_atomic_disable(struct drm_crtc *crtc,
 		rcar_lvds_clk_disable(bridge);
 	}
 
+	if (rcdu->info->dsi_clk_mask & BIT(rcrtc->index)) {
+		struct drm_bridge *bridge = rcdu->dsi[rcrtc->index];
+
+		/*
+		 * Disable the MIPI DSI clock output
+		 */
+		rcar_mipi_dsi_clk_disable(bridge);
+	}
+
 	spin_lock_irq(&crtc->dev->event_lock);
 	if (crtc->state->event) {
 		drm_crtc_send_vblank_event(crtc, crtc->state->event);
diff --git a/drivers/gpu/drm/rcar-du/rcar_du_crtc.h b/drivers/gpu/drm/rcar-du/rcar_du_crtc.h
index 440e6b4fbb58..26e79b74898c 100644
--- a/drivers/gpu/drm/rcar-du/rcar_du_crtc.h
+++ b/drivers/gpu/drm/rcar-du/rcar_du_crtc.h
@@ -96,6 +96,8 @@ struct rcar_du_crtc_state {
 enum rcar_du_output {
 	RCAR_DU_OUTPUT_DPAD0,
 	RCAR_DU_OUTPUT_DPAD1,
+	RCAR_DU_OUTPUT_DSI0,
+	RCAR_DU_OUTPUT_DSI1,
 	RCAR_DU_OUTPUT_HDMI0,
 	RCAR_DU_OUTPUT_HDMI1,
 	RCAR_DU_OUTPUT_LVDS0,
diff --git a/drivers/gpu/drm/rcar-du/rcar_du_drv.c b/drivers/gpu/drm/rcar-du/rcar_du_drv.c
index bfbff90588cb..16c0d7886fb2 100644
--- a/drivers/gpu/drm/rcar-du/rcar_du_drv.c
+++ b/drivers/gpu/drm/rcar-du/rcar_du_drv.c
@@ -473,6 +473,26 @@ static const struct rcar_du_device_info rcar_du_r8a7799x_info = {
 	.lvds_clk_mask =  BIT(1) | BIT(0),
 };
 
+static const struct rcar_du_device_info rcar_du_r8a779a0_info = {
+	.gen = 3,
+	.features = RCAR_DU_FEATURE_CRTC_IRQ_CLOCK
+		  | RCAR_DU_FEATURE_VSP1_SOURCE,
+	.channels_mask = BIT(1) | BIT(0),
+	.routes = {
+		/* R8A779A0 has two MIPI DSI outputs. */
+		[RCAR_DU_OUTPUT_DSI0] = {
+			.possible_crtcs = BIT(0),
+			.port = 0,
+		},
+		[RCAR_DU_OUTPUT_DSI1] = {
+			.possible_crtcs = BIT(1),
+			.port = 1,
+		},
+	},
+	.num_dsi = 2,
+	.dsi_clk_mask =  BIT(1) | BIT(0),
+};
+
 static const struct of_device_id rcar_du_of_table[] = {
 	{ .compatible = "renesas,du-r8a7742", .data = &rcar_du_r8a7790_info },
 	{ .compatible = "renesas,du-r8a7743", .data = &rzg1_du_r8a7743_info },
@@ -497,6 +517,7 @@ static const struct of_device_id rcar_du_of_table[] = {
 	{ .compatible = "renesas,du-r8a77980", .data = &rcar_du_r8a77970_info },
 	{ .compatible = "renesas,du-r8a77990", .data = &rcar_du_r8a7799x_info },
 	{ .compatible = "renesas,du-r8a77995", .data = &rcar_du_r8a7799x_info },
+	{ .compatible = "renesas,du-r8a779a0", .data = &rcar_du_r8a779a0_info },
 	{ }
 };
 
diff --git a/drivers/gpu/drm/rcar-du/rcar_du_drv.h b/drivers/gpu/drm/rcar-du/rcar_du_drv.h
index 02ca2d0e1b55..675207e8a56a 100644
--- a/drivers/gpu/drm/rcar-du/rcar_du_drv.h
+++ b/drivers/gpu/drm/rcar-du/rcar_du_drv.h
@@ -54,8 +54,10 @@ struct rcar_du_output_routing {
  * @quirks: device quirks (RCAR_DU_QUIRK_*)
  * @channels_mask: bit mask of available DU channels
  * @routes: array of CRTC to output routes, indexed by output (RCAR_DU_OUTPUT_*)
+ * @num_dsi: number of internal DSI encoders
  * @num_lvds: number of internal LVDS encoders
  * @dpll_mask: bit mask of DU channels equipped with a DPLL
+ * @dsi_clk_mask: bitmask of channels that can use the DSI clock as dot clock
  * @lvds_clk_mask: bitmask of channels that can use the LVDS clock as dot clock
  */
 struct rcar_du_device_info {
@@ -64,8 +66,10 @@ struct rcar_du_device_info {
 	unsigned int quirks;
 	unsigned int channels_mask;
 	struct rcar_du_output_routing routes[RCAR_DU_OUTPUT_MAX];
+	unsigned int num_dsi;
 	unsigned int num_lvds;
 	unsigned int dpll_mask;
+	unsigned int dsi_clk_mask;
 	unsigned int lvds_clk_mask;
 };
 
@@ -73,6 +77,7 @@ struct rcar_du_device_info {
 #define RCAR_DU_MAX_GROUPS		DIV_ROUND_UP(RCAR_DU_MAX_CRTCS, 2)
 #define RCAR_DU_MAX_VSPS		4
 #define RCAR_DU_MAX_LVDS		2
+#define RCAR_DU_MAX_DSI			2
 
 struct rcar_du_device {
 	struct device *dev;
@@ -89,6 +94,7 @@ struct rcar_du_device {
 	struct platform_device *cmms[RCAR_DU_MAX_CRTCS];
 	struct rcar_du_vsp vsps[RCAR_DU_MAX_VSPS];
 	struct drm_bridge *lvds[RCAR_DU_MAX_LVDS];
+	struct drm_bridge *dsi[RCAR_DU_MAX_DSI];
 
 	struct {
 		struct drm_property *colorkey;
diff --git a/drivers/gpu/drm/rcar-du/rcar_du_encoder.c b/drivers/gpu/drm/rcar-du/rcar_du_encoder.c
index 0daa8bba50f5..d7697099f2a1 100644
--- a/drivers/gpu/drm/rcar-du/rcar_du_encoder.c
+++ b/drivers/gpu/drm/rcar-du/rcar_du_encoder.c
@@ -83,6 +83,10 @@ int rcar_du_encoder_init(struct rcar_du_device *rcdu,
 		if (output == RCAR_DU_OUTPUT_LVDS0 ||
 		    output == RCAR_DU_OUTPUT_LVDS1)
 			rcdu->lvds[output - RCAR_DU_OUTPUT_LVDS0] = bridge;
+
+		if (output == RCAR_DU_OUTPUT_DSI0 ||
+		    output == RCAR_DU_OUTPUT_DSI1)
+			rcdu->dsi[output - RCAR_DU_OUTPUT_DSI0] = bridge;
 	}
 
 	/*
diff --git a/drivers/gpu/drm/rcar-du/rcar_du_group.c b/drivers/gpu/drm/rcar-du/rcar_du_group.c
index 88a783ceb3e9..92631a4571ad 100644
--- a/drivers/gpu/drm/rcar-du/rcar_du_group.c
+++ b/drivers/gpu/drm/rcar-du/rcar_du_group.c
@@ -124,6 +124,8 @@ static void rcar_du_group_setup_didsr(struct rcar_du_group *rgrp)
 		if (rcdu->info->lvds_clk_mask & BIT(rcrtc->index))
 			didsr |= DIDSR_LCDS_LVDS0(i)
 			      |  DIDSR_PDCS_CLK(i, 0);
+		else if (rcdu->info->dsi_clk_mask & BIT(rcrtc->index))
+			didsr |= DIDSR_LCDS_LVDS0(i);
 		else
 			didsr |= DIDSR_LCDS_DCLKIN(i)
 			      |  DIDSR_PDCS_CLK(i, 0);
-- 
2.30.2

Re: [PATCH 3/3] drm: rcar-du: Add r8a779a0 device support

[Laurent Pinchart]

Hi Kieran,

Thank you for the patch.

On Wed, Jun 23, 2021 at 12:20:24AM +0100, Kieran Bingham wrote:
> From: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
> 
> Extend the rcar_du_device_info structure and rcar_du_output enum to
> support DSI outputs and utilise these additions to provide support for
> the R8A779A0 V3U platform.
> 
> Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
> ---
>  drivers/gpu/drm/rcar-du/rcar_du_crtc.c    | 20 ++++++++++++++++++++
>  drivers/gpu/drm/rcar-du/rcar_du_crtc.h    |  2 ++
>  drivers/gpu/drm/rcar-du/rcar_du_drv.c     | 21 +++++++++++++++++++++
>  drivers/gpu/drm/rcar-du/rcar_du_drv.h     |  6 ++++++
>  drivers/gpu/drm/rcar-du/rcar_du_encoder.c |  4 ++++
>  drivers/gpu/drm/rcar-du/rcar_du_group.c   |  2 ++
>  6 files changed, 55 insertions(+)
> 
> diff --git a/drivers/gpu/drm/rcar-du/rcar_du_crtc.c b/drivers/gpu/drm/rcar-du/rcar_du_crtc.c
> index cff0d82b9491..edc46a96df6b 100644
> --- a/drivers/gpu/drm/rcar-du/rcar_du_crtc.c
> +++ b/drivers/gpu/drm/rcar-du/rcar_du_crtc.c
> @@ -31,6 +31,7 @@
>  #include "rcar_du_regs.h"
>  #include "rcar_du_vsp.h"
>  #include "rcar_lvds.h"
> +#include "rcar_mipi_dsi.h"
>  
>  static u32 rcar_du_crtc_read(struct rcar_du_crtc *rcrtc, u32 reg)
>  {
> @@ -737,6 +738,16 @@ static void rcar_du_crtc_atomic_enable(struct drm_crtc *crtc,
>  		rcar_lvds_clk_enable(bridge, mode->clock * 1000);
>  	}
>  
> +	/*
> +	 * On V3U the dot clock is provided by the MIPI DSI encoder which is
> +	 * attached to DU. So, the MIPI DSI module should be enable before starting DU.

s/enable/enabled/

Line wrap.

But do we ? On D3 and E3, the situation is different, the clock is
provided by the LVDS encoder even if a non-LVDS output is used. On V3U,
we only have DSI outputs, so the DSI encoder will be enabled normally
anyway.

If we don't have to enable the DSI clock manually here, we can get rid
of the dsi array, which will simplify this patch.

> +	 */
> +	if (rcdu->info->dsi_clk_mask & BIT(rcrtc->index)) {
> +		struct drm_bridge *bridge = rcdu->dsi[rcrtc->index];
> +
> +		rcar_mipi_dsi_clk_enable(bridge);
> +	}
> +
>  	rcar_du_crtc_start(rcrtc);
>  
>  	/*
> @@ -770,6 +781,15 @@ static void rcar_du_crtc_atomic_disable(struct drm_crtc *crtc,
>  		rcar_lvds_clk_disable(bridge);
>  	}
>  
> +	if (rcdu->info->dsi_clk_mask & BIT(rcrtc->index)) {
> +		struct drm_bridge *bridge = rcdu->dsi[rcrtc->index];
> +
> +		/*
> +		 * Disable the MIPI DSI clock output
> +		 */
> +		rcar_mipi_dsi_clk_disable(bridge);
> +	}
> +
>  	spin_lock_irq(&crtc->dev->event_lock);
>  	if (crtc->state->event) {
>  		drm_crtc_send_vblank_event(crtc, crtc->state->event);
> diff --git a/drivers/gpu/drm/rcar-du/rcar_du_crtc.h b/drivers/gpu/drm/rcar-du/rcar_du_crtc.h
> index 440e6b4fbb58..26e79b74898c 100644
> --- a/drivers/gpu/drm/rcar-du/rcar_du_crtc.h
> +++ b/drivers/gpu/drm/rcar-du/rcar_du_crtc.h
> @@ -96,6 +96,8 @@ struct rcar_du_crtc_state {
>  enum rcar_du_output {
>  	RCAR_DU_OUTPUT_DPAD0,
>  	RCAR_DU_OUTPUT_DPAD1,
> +	RCAR_DU_OUTPUT_DSI0,
> +	RCAR_DU_OUTPUT_DSI1,
>  	RCAR_DU_OUTPUT_HDMI0,
>  	RCAR_DU_OUTPUT_HDMI1,
>  	RCAR_DU_OUTPUT_LVDS0,
> diff --git a/drivers/gpu/drm/rcar-du/rcar_du_drv.c b/drivers/gpu/drm/rcar-du/rcar_du_drv.c
> index bfbff90588cb..16c0d7886fb2 100644
> --- a/drivers/gpu/drm/rcar-du/rcar_du_drv.c
> +++ b/drivers/gpu/drm/rcar-du/rcar_du_drv.c
> @@ -473,6 +473,26 @@ static const struct rcar_du_device_info rcar_du_r8a7799x_info = {
>  	.lvds_clk_mask =  BIT(1) | BIT(0),
>  };
>  
> +static const struct rcar_du_device_info rcar_du_r8a779a0_info = {
> +	.gen = 3,
> +	.features = RCAR_DU_FEATURE_CRTC_IRQ_CLOCK
> +		  | RCAR_DU_FEATURE_VSP1_SOURCE,
> +	.channels_mask = BIT(1) | BIT(0),
> +	.routes = {
> +		/* R8A779A0 has two MIPI DSI outputs. */
> +		[RCAR_DU_OUTPUT_DSI0] = {
> +			.possible_crtcs = BIT(0),
> +			.port = 0,
> +		},
> +		[RCAR_DU_OUTPUT_DSI1] = {
> +			.possible_crtcs = BIT(1),
> +			.port = 1,
> +		},
> +	},
> +	.num_dsi = 2,
> +	.dsi_clk_mask =  BIT(1) | BIT(0),
> +};
> +
>  static const struct of_device_id rcar_du_of_table[] = {
>  	{ .compatible = "renesas,du-r8a7742", .data = &rcar_du_r8a7790_info },
>  	{ .compatible = "renesas,du-r8a7743", .data = &rzg1_du_r8a7743_info },
> @@ -497,6 +517,7 @@ static const struct of_device_id rcar_du_of_table[] = {
>  	{ .compatible = "renesas,du-r8a77980", .data = &rcar_du_r8a77970_info },
>  	{ .compatible = "renesas,du-r8a77990", .data = &rcar_du_r8a7799x_info },
>  	{ .compatible = "renesas,du-r8a77995", .data = &rcar_du_r8a7799x_info },
> +	{ .compatible = "renesas,du-r8a779a0", .data = &rcar_du_r8a779a0_info },
>  	{ }
>  };
>  
> diff --git a/drivers/gpu/drm/rcar-du/rcar_du_drv.h b/drivers/gpu/drm/rcar-du/rcar_du_drv.h
> index 02ca2d0e1b55..675207e8a56a 100644
> --- a/drivers/gpu/drm/rcar-du/rcar_du_drv.h
> +++ b/drivers/gpu/drm/rcar-du/rcar_du_drv.h
> @@ -54,8 +54,10 @@ struct rcar_du_output_routing {
>   * @quirks: device quirks (RCAR_DU_QUIRK_*)
>   * @channels_mask: bit mask of available DU channels
>   * @routes: array of CRTC to output routes, indexed by output (RCAR_DU_OUTPUT_*)
> + * @num_dsi: number of internal DSI encoders
>   * @num_lvds: number of internal LVDS encoders
>   * @dpll_mask: bit mask of DU channels equipped with a DPLL
> + * @dsi_clk_mask: bitmask of channels that can use the DSI clock as dot clock
>   * @lvds_clk_mask: bitmask of channels that can use the LVDS clock as dot clock
>   */
>  struct rcar_du_device_info {
> @@ -64,8 +66,10 @@ struct rcar_du_device_info {
>  	unsigned int quirks;
>  	unsigned int channels_mask;
>  	struct rcar_du_output_routing routes[RCAR_DU_OUTPUT_MAX];
> +	unsigned int num_dsi;
>  	unsigned int num_lvds;
>  	unsigned int dpll_mask;
> +	unsigned int dsi_clk_mask;
>  	unsigned int lvds_clk_mask;
>  };
>  
> @@ -73,6 +77,7 @@ struct rcar_du_device_info {
>  #define RCAR_DU_MAX_GROUPS		DIV_ROUND_UP(RCAR_DU_MAX_CRTCS, 2)
>  #define RCAR_DU_MAX_VSPS		4
>  #define RCAR_DU_MAX_LVDS		2
> +#define RCAR_DU_MAX_DSI			2
>  
>  struct rcar_du_device {
>  	struct device *dev;
> @@ -89,6 +94,7 @@ struct rcar_du_device {
>  	struct platform_device *cmms[RCAR_DU_MAX_CRTCS];
>  	struct rcar_du_vsp vsps[RCAR_DU_MAX_VSPS];
>  	struct drm_bridge *lvds[RCAR_DU_MAX_LVDS];
> +	struct drm_bridge *dsi[RCAR_DU_MAX_DSI];
>  
>  	struct {
>  		struct drm_property *colorkey;
> diff --git a/drivers/gpu/drm/rcar-du/rcar_du_encoder.c b/drivers/gpu/drm/rcar-du/rcar_du_encoder.c
> index 0daa8bba50f5..d7697099f2a1 100644
> --- a/drivers/gpu/drm/rcar-du/rcar_du_encoder.c
> +++ b/drivers/gpu/drm/rcar-du/rcar_du_encoder.c
> @@ -83,6 +83,10 @@ int rcar_du_encoder_init(struct rcar_du_device *rcdu,
>  		if (output == RCAR_DU_OUTPUT_LVDS0 ||
>  		    output == RCAR_DU_OUTPUT_LVDS1)
>  			rcdu->lvds[output - RCAR_DU_OUTPUT_LVDS0] = bridge;
> +
> +		if (output == RCAR_DU_OUTPUT_DSI0 ||
> +		    output == RCAR_DU_OUTPUT_DSI1)
> +			rcdu->dsi[output - RCAR_DU_OUTPUT_DSI0] = bridge;
>  	}
>  
>  	/*
> diff --git a/drivers/gpu/drm/rcar-du/rcar_du_group.c b/drivers/gpu/drm/rcar-du/rcar_du_group.c
> index 88a783ceb3e9..92631a4571ad 100644
> --- a/drivers/gpu/drm/rcar-du/rcar_du_group.c
> +++ b/drivers/gpu/drm/rcar-du/rcar_du_group.c
> @@ -124,6 +124,8 @@ static void rcar_du_group_setup_didsr(struct rcar_du_group *rgrp)
>  		if (rcdu->info->lvds_clk_mask & BIT(rcrtc->index))
>  			didsr |= DIDSR_LCDS_LVDS0(i)
>  			      |  DIDSR_PDCS_CLK(i, 0);
> +		else if (rcdu->info->dsi_clk_mask & BIT(rcrtc->index))
> +			didsr |= DIDSR_LCDS_LVDS0(i);
>  		else
>  			didsr |= DIDSR_LCDS_DCLKIN(i)
>  			      |  DIDSR_PDCS_CLK(i, 0);

-- 
Regards,

Laurent Pinchart

Re: [PATCH 3/3] drm: rcar-du: Add r8a779a0 device support

[Kieran Bingham]

Hi Laurent,

On 23/06/2021 03:27, Laurent Pinchart wrote:
> Hi Kieran,
> 
> Thank you for the patch.
> 
> On Wed, Jun 23, 2021 at 12:20:24AM +0100, Kieran Bingham wrote:
>> From: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
>>
>> Extend the rcar_du_device_info structure and rcar_du_output enum to
>> support DSI outputs and utilise these additions to provide support for
>> the R8A779A0 V3U platform.
>>
>> Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
>> ---
>>  drivers/gpu/drm/rcar-du/rcar_du_crtc.c    | 20 ++++++++++++++++++++
>>  drivers/gpu/drm/rcar-du/rcar_du_crtc.h    |  2 ++
>>  drivers/gpu/drm/rcar-du/rcar_du_drv.c     | 21 +++++++++++++++++++++
>>  drivers/gpu/drm/rcar-du/rcar_du_drv.h     |  6 ++++++
>>  drivers/gpu/drm/rcar-du/rcar_du_encoder.c |  4 ++++
>>  drivers/gpu/drm/rcar-du/rcar_du_group.c   |  2 ++
>>  6 files changed, 55 insertions(+)
>>
>> diff --git a/drivers/gpu/drm/rcar-du/rcar_du_crtc.c b/drivers/gpu/drm/rcar-du/rcar_du_crtc.c
>> index cff0d82b9491..edc46a96df6b 100644
>> --- a/drivers/gpu/drm/rcar-du/rcar_du_crtc.c
>> +++ b/drivers/gpu/drm/rcar-du/rcar_du_crtc.c
>> @@ -31,6 +31,7 @@
>>  #include "rcar_du_regs.h"
>>  #include "rcar_du_vsp.h"
>>  #include "rcar_lvds.h"
>> +#include "rcar_mipi_dsi.h"
>>  
>>  static u32 rcar_du_crtc_read(struct rcar_du_crtc *rcrtc, u32 reg)
>>  {
>> @@ -737,6 +738,16 @@ static void rcar_du_crtc_atomic_enable(struct drm_crtc *crtc,
>>  		rcar_lvds_clk_enable(bridge, mode->clock * 1000);
>>  	}
>>  
>> +	/*
>> +	 * On V3U the dot clock is provided by the MIPI DSI encoder which is
>> +	 * attached to DU. So, the MIPI DSI module should be enable before starting DU.
> 
> s/enable/enabled/
> 
> Line wrap.
> 
> But do we ? On D3 and E3, the situation is different, the clock is
> provided by the LVDS encoder even if a non-LVDS output is used. On V3U,
> we only have DSI outputs, so the DSI encoder will be enabled normally
> anyway.

Ok - presumably you suggest moving the contents of
rcar_mipi_dsi_clk_enable() to be called as a pre_enable(struct
drm_bridge *bridge) hook then?

Or it can be directly in the enable I guess. (also adding a disable)

In fact, it's working when it's called from the enable, so I'll move
this all out and send fixups for your RFC series to ultimately squash down.


> If we don't have to enable the DSI clock manually here, we can get rid
> of the dsi array, which will simplify this patch.

Indeed, clears out a bit.

> 
>> +	 */
>> +	if (rcdu->info->dsi_clk_mask & BIT(rcrtc->index)) {
>> +		struct drm_bridge *bridge = rcdu->dsi[rcrtc->index];
>> +
>> +		rcar_mipi_dsi_clk_enable(bridge);
>> +	}
>> +
>>  	rcar_du_crtc_start(rcrtc);
>>  
>>  	/*
>> @@ -770,6 +781,15 @@ static void rcar_du_crtc_atomic_disable(struct drm_crtc *crtc,
>>  		rcar_lvds_clk_disable(bridge);
>>  	}
>>  
>> +	if (rcdu->info->dsi_clk_mask & BIT(rcrtc->index)) {
>> +		struct drm_bridge *bridge = rcdu->dsi[rcrtc->index];
>> +
>> +		/*
>> +		 * Disable the MIPI DSI clock output
>> +		 */
>> +		rcar_mipi_dsi_clk_disable(bridge);
>> +	}
>> +
>>  	spin_lock_irq(&crtc->dev->event_lock);
>>  	if (crtc->state->event) {
>>  		drm_crtc_send_vblank_event(crtc, crtc->state->event);
>> diff --git a/drivers/gpu/drm/rcar-du/rcar_du_crtc.h b/drivers/gpu/drm/rcar-du/rcar_du_crtc.h
>> index 440e6b4fbb58..26e79b74898c 100644
>> --- a/drivers/gpu/drm/rcar-du/rcar_du_crtc.h
>> +++ b/drivers/gpu/drm/rcar-du/rcar_du_crtc.h
>> @@ -96,6 +96,8 @@ struct rcar_du_crtc_state {
>>  enum rcar_du_output {
>>  	RCAR_DU_OUTPUT_DPAD0,
>>  	RCAR_DU_OUTPUT_DPAD1,
>> +	RCAR_DU_OUTPUT_DSI0,
>> +	RCAR_DU_OUTPUT_DSI1,
>>  	RCAR_DU_OUTPUT_HDMI0,
>>  	RCAR_DU_OUTPUT_HDMI1,
>>  	RCAR_DU_OUTPUT_LVDS0,
>> diff --git a/drivers/gpu/drm/rcar-du/rcar_du_drv.c b/drivers/gpu/drm/rcar-du/rcar_du_drv.c
>> index bfbff90588cb..16c0d7886fb2 100644
>> --- a/drivers/gpu/drm/rcar-du/rcar_du_drv.c
>> +++ b/drivers/gpu/drm/rcar-du/rcar_du_drv.c
>> @@ -473,6 +473,26 @@ static const struct rcar_du_device_info rcar_du_r8a7799x_info = {
>>  	.lvds_clk_mask =  BIT(1) | BIT(0),
>>  };
>>  
>> +static const struct rcar_du_device_info rcar_du_r8a779a0_info = {
>> +	.gen = 3,
>> +	.features = RCAR_DU_FEATURE_CRTC_IRQ_CLOCK
>> +		  | RCAR_DU_FEATURE_VSP1_SOURCE,
>> +	.channels_mask = BIT(1) | BIT(0),
>> +	.routes = {
>> +		/* R8A779A0 has two MIPI DSI outputs. */
>> +		[RCAR_DU_OUTPUT_DSI0] = {
>> +			.possible_crtcs = BIT(0),
>> +			.port = 0,
>> +		},
>> +		[RCAR_DU_OUTPUT_DSI1] = {
>> +			.possible_crtcs = BIT(1),
>> +			.port = 1,
>> +		},
>> +	},
>> +	.num_dsi = 2,
>> +	.dsi_clk_mask =  BIT(1) | BIT(0),
>> +};
>> +
>>  static const struct of_device_id rcar_du_of_table[] = {
>>  	{ .compatible = "renesas,du-r8a7742", .data = &rcar_du_r8a7790_info },
>>  	{ .compatible = "renesas,du-r8a7743", .data = &rzg1_du_r8a7743_info },
>> @@ -497,6 +517,7 @@ static const struct of_device_id rcar_du_of_table[] = {
>>  	{ .compatible = "renesas,du-r8a77980", .data = &rcar_du_r8a77970_info },
>>  	{ .compatible = "renesas,du-r8a77990", .data = &rcar_du_r8a7799x_info },
>>  	{ .compatible = "renesas,du-r8a77995", .data = &rcar_du_r8a7799x_info },
>> +	{ .compatible = "renesas,du-r8a779a0", .data = &rcar_du_r8a779a0_info },
>>  	{ }
>>  };
>>  
>> diff --git a/drivers/gpu/drm/rcar-du/rcar_du_drv.h b/drivers/gpu/drm/rcar-du/rcar_du_drv.h
>> index 02ca2d0e1b55..675207e8a56a 100644
>> --- a/drivers/gpu/drm/rcar-du/rcar_du_drv.h
>> +++ b/drivers/gpu/drm/rcar-du/rcar_du_drv.h
>> @@ -54,8 +54,10 @@ struct rcar_du_output_routing {
>>   * @quirks: device quirks (RCAR_DU_QUIRK_*)
>>   * @channels_mask: bit mask of available DU channels
>>   * @routes: array of CRTC to output routes, indexed by output (RCAR_DU_OUTPUT_*)
>> + * @num_dsi: number of internal DSI encoders
>>   * @num_lvds: number of internal LVDS encoders
>>   * @dpll_mask: bit mask of DU channels equipped with a DPLL
>> + * @dsi_clk_mask: bitmask of channels that can use the DSI clock as dot clock
>>   * @lvds_clk_mask: bitmask of channels that can use the LVDS clock as dot clock
>>   */
>>  struct rcar_du_device_info {
>> @@ -64,8 +66,10 @@ struct rcar_du_device_info {
>>  	unsigned int quirks;
>>  	unsigned int channels_mask;
>>  	struct rcar_du_output_routing routes[RCAR_DU_OUTPUT_MAX];
>> +	unsigned int num_dsi;
>>  	unsigned int num_lvds;
>>  	unsigned int dpll_mask;
>> +	unsigned int dsi_clk_mask;
>>  	unsigned int lvds_clk_mask;
>>  };
>>  
>> @@ -73,6 +77,7 @@ struct rcar_du_device_info {
>>  #define RCAR_DU_MAX_GROUPS		DIV_ROUND_UP(RCAR_DU_MAX_CRTCS, 2)
>>  #define RCAR_DU_MAX_VSPS		4
>>  #define RCAR_DU_MAX_LVDS		2
>> +#define RCAR_DU_MAX_DSI			2
>>  
>>  struct rcar_du_device {
>>  	struct device *dev;
>> @@ -89,6 +94,7 @@ struct rcar_du_device {
>>  	struct platform_device *cmms[RCAR_DU_MAX_CRTCS];
>>  	struct rcar_du_vsp vsps[RCAR_DU_MAX_VSPS];
>>  	struct drm_bridge *lvds[RCAR_DU_MAX_LVDS];
>> +	struct drm_bridge *dsi[RCAR_DU_MAX_DSI];
>>  
>>  	struct {
>>  		struct drm_property *colorkey;
>> diff --git a/drivers/gpu/drm/rcar-du/rcar_du_encoder.c b/drivers/gpu/drm/rcar-du/rcar_du_encoder.c
>> index 0daa8bba50f5..d7697099f2a1 100644
>> --- a/drivers/gpu/drm/rcar-du/rcar_du_encoder.c
>> +++ b/drivers/gpu/drm/rcar-du/rcar_du_encoder.c
>> @@ -83,6 +83,10 @@ int rcar_du_encoder_init(struct rcar_du_device *rcdu,
>>  		if (output == RCAR_DU_OUTPUT_LVDS0 ||
>>  		    output == RCAR_DU_OUTPUT_LVDS1)
>>  			rcdu->lvds[output - RCAR_DU_OUTPUT_LVDS0] = bridge;
>> +
>> +		if (output == RCAR_DU_OUTPUT_DSI0 ||
>> +		    output == RCAR_DU_OUTPUT_DSI1)
>> +			rcdu->dsi[output - RCAR_DU_OUTPUT_DSI0] = bridge;
>>  	}
>>  
>>  	/*
>> diff --git a/drivers/gpu/drm/rcar-du/rcar_du_group.c b/drivers/gpu/drm/rcar-du/rcar_du_group.c
>> index 88a783ceb3e9..92631a4571ad 100644
>> --- a/drivers/gpu/drm/rcar-du/rcar_du_group.c
>> +++ b/drivers/gpu/drm/rcar-du/rcar_du_group.c
>> @@ -124,6 +124,8 @@ static void rcar_du_group_setup_didsr(struct rcar_du_group *rgrp)
>>  		if (rcdu->info->lvds_clk_mask & BIT(rcrtc->index))
>>  			didsr |= DIDSR_LCDS_LVDS0(i)
>>  			      |  DIDSR_PDCS_CLK(i, 0);
>> +		else if (rcdu->info->dsi_clk_mask & BIT(rcrtc->index))
>> +			didsr |= DIDSR_LCDS_LVDS0(i);
>>  		else
>>  			didsr |= DIDSR_LCDS_DCLKIN(i)
>>  			      |  DIDSR_PDCS_CLK(i, 0);
> 

Re: [PATCH 0/3] drm: rcar-du: V3U support

[Laurent Pinchart]

Hi Kieran,

It seems that the cover letter didn't include the mailing lists on CC,
fixing this.

On Wed, Jun 23, 2021 at 12:20:21AM +0100, Kieran Bingham wrote:
> Extend support for the V3U Display Unit, making use of the {recently,
> soon to be} posted DSI encoder from Laurent.
> 
> Patch 1 just cleans up in preparation for patch 3, and patch 2 is
> required for operation on the V3U, however it is functional and should
> be correct for the D3 and E3 as well, as they also lack external sync.
> 
> Patch 3 enables the V3U and connects it to the MIPI DSI encoder, of
> which I'm in a race between me and laurent for posting these patches ;-)

You won the race :-)

> Tests have been run and produce images - but there are artifacts visible
> and some modes are unavailable, which will need further investigations,
> but can be done on top of this integration.
> 
> Kieran Bingham (3):
>   drm: rcar-du: Sort the DU outputs
>   drm: rcar-du: Only initialise TVM_TVSYNC mode when supported
>   drm: rcar-du: Add r8a779a0 device support
> 
>  drivers/gpu/drm/rcar-du/rcar_du_crtc.c    | 25 ++++++++++++++++++++++-
>  drivers/gpu/drm/rcar-du/rcar_du_crtc.h    |  6 ++++--
>  drivers/gpu/drm/rcar-du/rcar_du_drv.c     | 21 +++++++++++++++++++
>  drivers/gpu/drm/rcar-du/rcar_du_drv.h     |  6 ++++++
>  drivers/gpu/drm/rcar-du/rcar_du_encoder.c |  4 ++++
>  drivers/gpu/drm/rcar-du/rcar_du_group.c   |  2 ++
>  6 files changed, 61 insertions(+), 3 deletions(-)
> 

-- 
Regards,

Laurent Pinchart

Re: [PATCH 0/3] drm: rcar-du: V3U support

[Kieran Bingham]

Hi Laurent,

On 23/06/2021 03:09, Laurent Pinchart wrote:
> Hi Kieran,
> 
> It seems that the cover letter didn't include the mailing lists on CC,
> fixing this.

Argh, I should have remembered this. I used --cc-cmd
./scripts/get_maintainer... but it doesn't match anything for the cover
letters, when really the cover letter should cc all recipients of all
patches.

Anyone got a workaround for that, so that the cover-letter actually
makes it to the right places as well?


> On Wed, Jun 23, 2021 at 12:20:21AM +0100, Kieran Bingham wrote:
>> Extend support for the V3U Display Unit, making use of the {recently,
>> soon to be} posted DSI encoder from Laurent.
>>
>> Patch 1 just cleans up in preparation for patch 3, and patch 2 is
>> required for operation on the V3U, however it is functional and should
>> be correct for the D3 and E3 as well, as they also lack external sync.
>>
>> Patch 3 enables the V3U and connects it to the MIPI DSI encoder, of
>> which I'm in a race between me and laurent for posting these patches ;-)
> 
> You won the race :-)

Ah well, as long as the dependency is clear ;D

--
Kieran


> 
>> Tests have been run and produce images - but there are artifacts visible
>> and some modes are unavailable, which will need further investigations,
>> but can be done on top of this integration.
>>
>> Kieran Bingham (3):
>>   drm: rcar-du: Sort the DU outputs
>>   drm: rcar-du: Only initialise TVM_TVSYNC mode when supported
>>   drm: rcar-du: Add r8a779a0 device support
>>
>>  drivers/gpu/drm/rcar-du/rcar_du_crtc.c    | 25 ++++++++++++++++++++++-
>>  drivers/gpu/drm/rcar-du/rcar_du_crtc.h    |  6 ++++--
>>  drivers/gpu/drm/rcar-du/rcar_du_drv.c     | 21 +++++++++++++++++++
>>  drivers/gpu/drm/rcar-du/rcar_du_drv.h     |  6 ++++++
>>  drivers/gpu/drm/rcar-du/rcar_du_encoder.c |  4 ++++
>>  drivers/gpu/drm/rcar-du/rcar_du_group.c   |  2 ++
>>  6 files changed, 61 insertions(+), 3 deletions(-)
>>
>