Re: [PATCH] pinctrl: qcom: spmi-gpio: Add pmc8180 & pmc8180c

[Bjorn Andersson <bjorn.andersson@linaro.org>]

On Mon 28 Jun 19:38 CDT 2021, Bjorn Andersson wrote:

> The SC8180x platform comes with PMC8180 and PMC8180c, add support for
> the GPIO controller in these PMICs.
> 

Linus, would you be willing to pick this up? Got some dts patches that
uses these compatibles.

Regards,
Bjorn

> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> ---
>  Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt | 4 ++++
>  drivers/pinctrl/qcom/pinctrl-spmi-gpio.c                     | 2 ++
>  2 files changed, 6 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt
> index 161216daf463..412613c80e9e 100644
> --- a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt
> +++ b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt
> @@ -30,6 +30,8 @@ PMIC's from Qualcomm.
>  		    "qcom,pm8350-gpio"
>  		    "qcom,pm8350b-gpio"
>  		    "qcom,pm8350c-gpio"
> +		    "qcom,pmc8180-gpio"
> +		    "qcom,pmc8180c-gpio"
>  		    "qcom,pmk8350-gpio"
>  		    "qcom,pm7325-gpio"
>  		    "qcom,pmr735a-gpio"
> @@ -120,6 +122,8 @@ to specify in a pin configuration subnode:
>  		    gpio1-gpio10 for pm8350
>  		    gpio1-gpio8 for pm8350b
>  		    gpio1-gpio9 for pm8350c
> +		    gpio1-gpio10 for pmc8180
> +		    gpio1-gpio12 for pmc8180c
>  		    gpio1-gpio4 for pmk8350
>  		    gpio1-gpio10 for pm7325
>  		    gpio1-gpio4 for pmr735a
> diff --git a/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c b/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c
> index a89d24a040af..9251fb5153e7 100644
> --- a/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c
> +++ b/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c
> @@ -1123,10 +1123,12 @@ static const struct of_device_id pmic_gpio_of_match[] = {
>  	{ .compatible = "qcom,pm660l-gpio", .data = (void *) 12 },
>  	/* pm8150 has 10 GPIOs with holes on 2, 5, 7 and 8 */
>  	{ .compatible = "qcom,pm8150-gpio", .data = (void *) 10 },
> +	{ .compatible = "qcom,pmc8180-gpio", .data = (void *) 10 },
>  	/* pm8150b has 12 GPIOs with holes on 3, r and 7 */
>  	{ .compatible = "qcom,pm8150b-gpio", .data = (void *) 12 },
>  	/* pm8150l has 12 GPIOs with holes on 7 */
>  	{ .compatible = "qcom,pm8150l-gpio", .data = (void *) 12 },
> +	{ .compatible = "qcom,pmc8180c-gpio", .data = (void *) 12 },
>  	{ .compatible = "qcom,pm8350-gpio", .data = (void *) 10 },
>  	{ .compatible = "qcom,pm8350b-gpio", .data = (void *) 8 },
>  	{ .compatible = "qcom,pm8350c-gpio", .data = (void *) 9 },
> -- 
> 2.29.2
>