Re: [PATCH v1] arm64: dts: fsl: ls1028a-rdb: Add dts file to choose swp5 as dsa master

[Andrew Lunn <andrew@lunn.ch>]

On Fri, Aug 13, 2021 at 11:01:55AM +0800, hongbo.wang@nxp.com wrote:
> From: hongbo wang <hongbo.wang@nxp.com>
> 
> some use cases want to use swp4-eno2 link as ordinary data path,
> so we can enable swp5 as dsa master, the data from kernel can
> be transmitted to eno3, then send to swp5 via internal link, switch will
> forward it to swp0-3.
> 
> the data to kernel will come from swp0-3, and received by kernel
> via swp5-eno3 link.
 
> new file mode 100644
> index 000000000000..a88396c137a1
> --- /dev/null
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb-dsa-swp5-eno3.dts
> @@ -0,0 +1,27 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Device Tree file for NXP LS1028A RDB with dsa master swp5-eno3.
> + *
> + * Copyright 2018-2021 NXP
> + *
> + * Hongbo Wang <hongbo.wang@nxp.com>
> + *
> + */
> +
> +/dts-v1/;
> +#include "fsl-ls1028a-rdb.dts"

You will end up with two DT blobs with the same top level
compatible. This is going to cause confusion. I suggest you add an
additional top level compatible to make it clear this differs from the
compatible = "fsl,ls1028a-rdb", "fsl,ls1028a" blob.

   Andrew