[PATCH 4/7] ARM: dts: at91: add Exegin Q5xR5 board

Claudiu Beznea
2021-08-05T15:57:14Z

From: Owen Kirby <osk@exegin.com>

Add Exegin Q5xR5. The base device tree is from OpenWrt tree and with
the addition of this patch there will be no need to maintain it
separatelly in OpenWrt.

[osk: original author of patch in OpenWrt]
Signed-off-by: Owen Kirby <osk@exegin.com>
[claudiu.beznea: use "& {" syntax, sorted nodes in alphabetical
order, adapted flash to new support in kernel 5.14, use proper
compatibles according to kernel 5.14, use macros instead of
hardcoded numbers for pinctrl phandles and for all pinctrl references,
add pinctrl-names, pinctrl-X where necessaray]
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
---
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/at91-q5xr5.dts | 200 +++++++++++++++++++++++++++++++
2 files changed, 201 insertions(+)
create mode 100644 arch/arm/boot/dts/at91-q5xr5.dts

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 63b60f571035..34f6ead22048 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -40,6 +40,7 @@ dtb-$(CONFIG_SOC_AT91SAM9) += \
at91-kizboxmini-base.dtb \
at91-kizboxmini-mb.dtb \
at91-kizboxmini-rd.dtb \
+ at91-q5xr5.dtb \
at91-smartkiz.dtb \
at91-wb45n.dtb \
at91sam9g15ek.dtb \
diff --git a/arch/arm/boot/dts/at91-q5xr5.dts b/arch/arm/boot/dts/at91-q5xr5.dts
new file mode 100644
index 000000000000..4866f1c6ccf9
--- /dev/null
+++ b/arch/arm/boot/dts/at91-q5xr5.dts
@@ -0,0 +1,200 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Device Tree file for Exegin Q5xR5 board
+ *
+ * Copyright (C) 2014 Owen Kirby <osk@exegin.com>
+ */
+
+/dts-v1/;
+#include "at91sam9g20.dtsi"
+
+/ {
+ model = "Exegin Q5x (rev5)";
+ compatible = "exegin,q5xr5", "atmel,at91sam9g20", "atmel,at91sam9";
+
+ chosen {
+ bootargs = "console=ttyS0,115200 rootfstype=squashfs,jffs2";
+ };
+
+ memory {
+ reg = <0x20000000 0x0>;
+ };
+
+ clocks {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ main_clock: clock@0 {
+ compatible = "atmel,osc", "fixed-clock";
+ clock-frequency = <18432000>;
+ };
+
+ slow_xtal {
+ clock-frequency = <32768>;
+ };
+
+ main_xtal {
+ clock-frequency = <18432000>;
+ };
+ };
+};
+
+&dbgu {
+ status = "okay";
+};
+
+&ebi {
+ status = "okay";
+
+ flash: flash@0 {
+ compatible = "cfi-flash";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x0 0x1000000 0x800000>;
+ bank-width = <2>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ kernel@0 {
+ label = "kernel";
+ reg = <0x0 0x200000>;
+ };
+
+ rootfs@200000 {
+ label = "rootfs";
+ reg = <0x200000 0x600000>;
+ };
+ };
+ };
+};
+
+&macb0 {
+ phy-mode = "mii";
+ status = "okay";
+};
+
+&pinctrl {
+ board {
+ pinctrl_pck0_as_mck: pck0_as_mck {
+ atmel,pins = <AT91_PIOC 1 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+ };
+ };
+
+ spi0 {
+ pinctrl_spi0: spi0-0 {
+ atmel,pins =
+ <AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE
+ AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE
+ AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_spi0_npcs0: spi0_npcs0 {
+ atmel,pins = <AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_spi0_npcs1: spi0_npcs1 {
+ atmel,pins = <AT91_PIOC 11 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+ };
+ };
+
+ spi1 {
+ pinctrl_spi1: spi1-0 {
+ atmel,pins =
+ <AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_NONE
+ AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE
+ AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_spi1_npcs0: spi1_npcs0 {
+ atmel,pins = <AT91_PIOB 3 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_spi1_npcs1: spi1_npcs1 {
+ atmel,pins = <AT91_PIOC 5 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+ };
+ };
+};
+
+&spi0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi0 &pinctrl_spi0_npcs0 &pinctrl_spi0_npcs1>;
+ cs-gpios = <&pioA 3 GPIO_ACTIVE_HIGH>, <&pioC 11 GPIO_ACTIVE_LOW>, <0>, <0>;
+ status = "okay";
+
+ m25p80@0 {
+ compatible = "jedec,spi-nor";
+ spi-max-frequency = <20000000>;
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ at91boot@0 {
+ label = "at91boot";
+ reg = <0x0 0x4000>;
+ };
+
+ uenv@4000 {
+ label = "uboot-env";
+ reg = <0x4000 0x4000>;
+ };
+
+ uboot@8000 {
+ label = "uboot";
+ reg = <0x8000 0x3E000>;
+ };
+ };
+
+ spidev@1 {
+ compatible = "spidev";
+ spi-max-frequency = <2000000>;
+ reg = <1>;
+ };
+};
+
+&spi1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi1 &pinctrl_spi1_npcs0 &pinctrl_spi1_npcs1>;
+ cs-gpios = <&pioB 3 GPIO_ACTIVE_HIGH>, <&pioC 5 GPIO_ACTIVE_LOW>, <0>, <0>;
+ status = "okay";
+
+ spidev@0 {
+ compatible = "spidev";
+ spi-max-frequency = <2000000>;
+ reg = <0>;
+ };
+
+ spidev@1 {
+ compatible = "spidev";
+ spi-max-frequency = <2000000>;
+ reg = <1>;
+ };
+};
+
+&usart0 {
+ pinctrl-0 =
+ <&pinctrl_usart0
+ &pinctrl_usart0_rts
+ &pinctrl_usart0_cts
+ &pinctrl_usart0_dtr_dsr
+ &pinctrl_usart0_dcd
+ &pinctrl_usart0_ri>;
+ status = "okay";
+};
+
+&usb0 {
+ num-ports = <2>;
+ status = "okay";
+};
+
+&usb1 {
+ status = "okay";
+};
+
+&watchdog {
+ status = "okay";
+};
+
--
2.25.1