From: Borislav Petkov <bp@alien8.de>
To: amd-gfx@lists.freedesktop.org, linux-kernel@vger.kernel.org
Cc: Alex Deucher <alexander.deucher@amd.com>,
Evan Quan <evan.quan@amd.com>, xinhui pan <xinhui.pan@amd.com>,
Guchun Chen <guchun.chen@amd.com>
Subject: bf756fb833cb ("drm/amdgpu: add missing cleanups for Polaris12 UVD/VCE on suspend")
Date: Thu, 7 Oct 2021 20:00:30 +0200 [thread overview]
Message-ID: <YV81vidWQLWvATMM@zn.tnic> (raw)
Hi folks,
commit in $Subject breaks rebooting an HP laptop here with a Carrizo
chipset: after typing "reboot" and pressing Enter, it powers off the
machine up to a certain point but the fans remain on, screen goes black
and nothing happens anymore. No reboot. I have to power it off by
holding the power key down for 4 seconds.
Reverting the patch fixes the issue.
GPU info on that machine:
[ 1.462214] [drm] amdgpu kernel modesetting enabled.
[ 1.465150] amdgpu 0000:00:01.0: vgaarb: deactivate vga console
[ 1.466259] Console: switching to colour dummy device 80x25
[ 1.466844] [drm] initializing kernel modesetting (CARRIZO 0x1002:0x9874 0x103C:0x807E 0xC4).
[ 1.467242] amdgpu 0000:00:01.0: amdgpu: Trusted Memory Zone (TMZ) feature not supported
[ 1.467552] [drm] register mmio base: 0xD0C00000
[ 1.467750] [drm] register mmio size: 262144
[ 1.467901] [drm] add ip block number 0 <vi_common>
[ 1.468067] [drm] add ip block number 1 <gmc_v8_0>
[ 1.468266] [drm] add ip block number 2 <cz_ih>
[ 1.468436] [drm] add ip block number 3 <gfx_v8_0>
[ 1.468603] [drm] add ip block number 4 <sdma_v3_0>
[ 1.468809] [drm] add ip block number 5 <powerplay>
[ 1.468975] [drm] add ip block number 6 <dm>
[ 1.469120] [drm] add ip block number 7 <uvd_v6_0>
[ 1.469282] [drm] add ip block number 8 <vce_v3_0>
[ 1.485350] [drm] BIOS signature incorrect 20 7
[ 1.485494] resource sanity check: requesting [mem 0x000c0000-0x000dffff], which spans more than PCI Bus 0000:00 [mem 0x000c0000-
0x000c3fff window]
[ 1.485922] caller pci_map_rom+0x68/0x1b0 mapping multiple BARs
[ 1.486273] amdgpu 0000:00:01.0: amdgpu: Fetched VBIOS from ROM BAR
[ 1.486488] amdgpu: ATOM BIOS: SWBRT27354.001
[ 1.486701] [drm] UVD is enabled in physical mode
[ 1.486862] [drm] VCE enabled in physical mode
[ 1.487061] [drm] vm size is 64 GB, 2 levels, block size is 10-bit, fragment size is 9-bit
[ 1.487339] amdgpu 0000:00:01.0: amdgpu: VRAM: 512M 0x000000F400000000 - 0x000000F41FFFFFFF (512M used)
[ 1.487652] amdgpu 0000:00:01.0: amdgpu: GART: 1024M 0x000000FF00000000 - 0x000000FF3FFFFFFF
[ 1.487939] [drm] Detected VRAM RAM=512M, BAR=512M
[ 1.488101] [drm] RAM width 128bits UNKNOWN
[ 1.488309] [drm] amdgpu: 512M of VRAM memory ready
[ 1.488522] [drm] amdgpu: 3072M of GTT memory ready.
[ 1.488707] [drm] GART: num cpu pages 262144, num gpu pages 262144
[ 1.488997] [drm] PCIE GART of 1024M enabled (table at 0x000000F400900000).
[ 1.491962] amdgpu: hwmgr_sw_init smu backed is smu8_smu
[ 1.492544] [drm] Found UVD firmware Version: 1.91 Family ID: 11
[ 1.492764] [drm] UVD ENC is disabled
[ 1.494177] [drm] Found VCE firmware Version: 52.4 Binary ID: 3
[ 1.495765] amdgpu: smu version 18.62.00
[ 1.501983] [drm] DM_PPLIB: values for Engine clock
[ 1.502201] [drm] DM_PPLIB: 300000
[ 1.502321] [drm] DM_PPLIB: 360000
[ 1.502441] [drm] DM_PPLIB: 423530
[ 1.502561] [drm] DM_PPLIB: 514290
[ 1.502680] [drm] DM_PPLIB: 626090
[ 1.502799] [drm] DM_PPLIB: 720000
[ 1.502919] [drm] DM_PPLIB: Validation clocks:
[ 1.503069] [drm] DM_PPLIB: engine_max_clock: 72000
[ 1.503242] [drm] DM_PPLIB: memory_max_clock: 80000
[ 1.503415] [drm] DM_PPLIB: level : 8
[ 1.503578] [drm] DM_PPLIB: values for Display clock
[ 1.503745] [drm] DM_PPLIB: 300000
[ 1.503864] [drm] DM_PPLIB: 400000
[ 1.503984] [drm] DM_PPLIB: 496560
[ 1.504147] [drm] DM_PPLIB: 626090
[ 1.504275] [drm] DM_PPLIB: 685720
[ 1.504403] [drm] DM_PPLIB: 757900
[ 1.504526] [drm] DM_PPLIB: Validation clocks:
[ 1.504678] [drm] DM_PPLIB: engine_max_clock: 72000
[ 1.504891] [drm] DM_PPLIB: memory_max_clock: 80000
[ 1.505063] [drm] DM_PPLIB: level : 8
[ 1.505225] [drm] DM_PPLIB: values for Memory clock
[ 1.505389] [drm] DM_PPLIB: 333000
[ 1.505508] [drm] DM_PPLIB: 800000
[ 1.505628] [drm] DM_PPLIB: Validation clocks:
[ 1.505777] [drm] DM_PPLIB: engine_max_clock: 72000
[ 1.505950] [drm] DM_PPLIB: memory_max_clock: 80000
[ 1.506123] [drm] DM_PPLIB: level : 8
[ 1.506375] [drm] Display Core initialized with v3.2.149!
[ 1.584817] [drm] UVD initialized successfully.
[ 1.784234] [drm] VCE initialized successfully.
[ 1.784415] amdgpu 0000:00:01.0: amdgpu: SE 1, SH per SE 1, CU per SH 8, active_cu_number 8
[ 1.787958] [drm] fb mappable at 0xA0EE4000
[ 1.788118] [drm] vram apper at 0xA0000000
[ 1.788258] [drm] size 14745600
[ 1.788367] [drm] fb depth is 24
[ 1.788503] [drm] pitch is 10240
[ 1.789198] fbcon: amdgpu (fb0) is primary device
[ 1.880014] Console: switching to colour frame buffer device 320x90
[ 1.903779] amdgpu 0000:00:01.0: [drm] fb0: amdgpu frame buffer device
[ 1.918353] [drm] Initialized amdgpu 3.42.0 20150101 for 0000:00:01.0 on minor 0
--
Regards/Gruss,
Boris.
https://people.kernel.org/tglx/notes-about-netiquette
next reply other threads:[~2021-10-07 18:00 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-10-07 18:00 Borislav Petkov [this message]
2021-10-08 14:45 ` bf756fb833cb ("drm/amdgpu: add missing cleanups for Polaris12 UVD/VCE on suspend") Alex Deucher
2021-10-08 15:04 ` Borislav Petkov
2021-10-08 15:12 ` Alex Deucher
2021-10-08 15:35 ` Borislav Petkov
2021-10-09 1:20 ` Quan, Evan
2021-10-09 9:01 ` Borislav Petkov
2021-10-09 9:54 ` Quan, Evan
2021-10-09 10:07 ` Borislav Petkov
2021-10-11 8:03 ` Quan, Evan
2021-10-11 17:08 ` Borislav Petkov
2021-10-13 9:19 ` Quan, Evan
2021-10-13 9:26 ` Borislav Petkov
2021-10-14 2:02 ` Quan, Evan
2021-10-14 9:00 ` Borislav Petkov
2021-10-15 9:24 ` Quan, Evan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=YV81vidWQLWvATMM@zn.tnic \
--to=bp@alien8.de \
--cc=alexander.deucher@amd.com \
--cc=amd-gfx@lists.freedesktop.org \
--cc=evan.quan@amd.com \
--cc=guchun.chen@amd.com \
--cc=linux-kernel@vger.kernel.org \
--cc=xinhui.pan@amd.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox