public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Rob Herring <robh@kernel.org>
To: Luca Ceresoli <luca@lucaceresoli.net>
Cc: linux-kernel@vger.kernel.org, Lee Jones <lee.jones@linaro.org>,
	Alessandro Zummo <a.zummo@towertech.it>,
	Alexandre Belloni <alexandre.belloni@bootlin.com>,
	Chanwoo Choi <cw00.choi@samsung.com>,
	Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>,
	Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>,
	Wim Van Sebroeck <wim@linux-watchdog.org>,
	Guenter Roeck <linux@roeck-us.net>,
	devicetree@vger.kernel.org, linux-rtc@vger.kernel.org,
	linux-watchdog@vger.kernel.org,
	Chiwoong Byun <woong.byun@samsung.com>,
	Laxman Dewangan <ldewangan@nvidia.com>,
	Randy Dunlap <rdunlap@infradead.org>
Subject: Re: [PATCH v2 5/9] dt-bindings: mfd: add Maxim MAX77714 PMIC
Date: Tue, 26 Oct 2021 22:17:32 -0500	[thread overview]
Message-ID: <YXjEzMYd9iYbodxo@robh.at.kernel.org> (raw)
In-Reply-To: <20211019145919.7327-6-luca@lucaceresoli.net>

On Tue, Oct 19, 2021 at 04:59:15PM +0200, Luca Ceresoli wrote:
> Add bindings for the MAX77714 PMIC with GPIO, RTC and watchdog.
> 
> Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
> 
> ---
> 
> Changes in v2: none
> ---
>  .../bindings/mfd/maxim,max77714.yaml          | 58 +++++++++++++++++++
>  MAINTAINERS                                   |  5 ++
>  2 files changed, 63 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/mfd/maxim,max77714.yaml
> 
> diff --git a/Documentation/devicetree/bindings/mfd/maxim,max77714.yaml b/Documentation/devicetree/bindings/mfd/maxim,max77714.yaml
> new file mode 100644
> index 000000000000..2b0ce3b9bc92
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mfd/maxim,max77714.yaml
> @@ -0,0 +1,58 @@
> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/mfd/maxim,max77714.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: MAX77714 PMIC with GPIO, RTC and watchdog from Maxim Integrated.
> +
> +maintainers:
> +  - Luca Ceresoli <luca@lucaceresoli.net>
> +
> +description: |
> +  MAX77714 is a Power Management IC with 4 buck regulators, 9
> +  low-dropout regulators, 8 GPIOs, RTC and watchdog.

Where's the regulators nodes and binding?

> +
> +properties:
> +  compatible:
> +    const: maxim,max77714
> +
> +  reg:
> +    maxItems: 1
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  interrupt-controller: true
> +
> +  "#interrupt-cells":
> +    const: 2
> +    description:
> +      The first cell is the IRQ number, the second cell is the trigger type.
> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupts
> +  - interrupt-controller
> +  - "#interrupt-cells"
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/interrupt-controller/irq.h>
> +    i2c {
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +
> +        pmic@1c {
> +            compatible = "maxim,max77714";
> +            reg = <0x1c>;
> +            interrupt-parent = <&gpio2>;
> +            interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
> +
> +            interrupt-controller;
> +            #interrupt-cells = <2>;
> +        };
> +    };
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 8d118d7957d2..514ff4a735e5 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -11386,6 +11386,11 @@ F:	drivers/power/supply/max77650-charger.c
>  F:	drivers/regulator/max77650-regulator.c
>  F:	include/linux/mfd/max77650.h
>  
> +MAXIM MAX77714 PMIC MFD DRIVER
> +M:	Luca Ceresoli <luca@lucaceresoli.net>
> +S:	Maintained
> +F:	Documentation/devicetree/bindings/mfd/maxim,max77714.yaml
> +
>  MAXIM MAX77802 PMIC REGULATOR DEVICE DRIVER
>  M:	Javier Martinez Canillas <javier@dowhile0.org>
>  L:	linux-kernel@vger.kernel.org
> -- 
> 2.25.1
> 
> 

  reply	other threads:[~2021-10-27  3:17 UTC|newest]

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-10-19 14:59 [PATCH v2 0/9] Add MAX77714 PMIC minimal driver (RTC and watchdog only) Luca Ceresoli
2021-10-19 14:59 ` [PATCH v2 1/9] mfd: max77686: Correct tab-based alignment of register addresses Luca Ceresoli
2021-10-21 15:53   ` Lee Jones
2021-10-19 14:59 ` [PATCH v2 2/9] rtc: max77686: convert comments to kernel-doc format Luca Ceresoli
2021-10-19 14:59 ` [PATCH v2 3/9] rtc: max77686: rename day-of-month defines Luca Ceresoli
2021-10-21  9:42   ` Alexandre Belloni
2021-10-19 14:59 ` [PATCH v2 4/9] rtc: max77686: remove unused code to read in 12-hour mode Luca Ceresoli
2021-10-21  9:43   ` Alexandre Belloni
2021-10-19 14:59 ` [PATCH v2 5/9] dt-bindings: mfd: add Maxim MAX77714 PMIC Luca Ceresoli
2021-10-27  3:17   ` Rob Herring [this message]
2021-10-29 15:50     ` Luca Ceresoli
2021-10-19 14:59 ` [PATCH v2 6/9] mfd: max77714: Add driver for " Luca Ceresoli
2021-10-20  7:00   ` Krzysztof Kozlowski
2021-10-21 18:43   ` Lee Jones
2021-10-27 10:32     ` Luca Ceresoli
2021-10-27 13:44       ` Lee Jones
2021-10-27 14:23         ` Luca Ceresoli
2021-10-19 14:59 ` [PATCH v2 7/9] watchdog: Kconfig: fix help text indentation Luca Ceresoli
2021-10-19 15:06   ` Guenter Roeck
2021-10-21 16:28     ` Luca Ceresoli
2021-10-19 14:59 ` [PATCH v2 8/9] watchdog: max77714: add driver for the watchdog in the MAX77714 PMIC Luca Ceresoli
2021-10-19 15:10   ` Guenter Roeck
2021-10-19 14:59 ` [PATCH v2 9/9] rtc: max77686: add MAX77714 support Luca Ceresoli

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=YXjEzMYd9iYbodxo@robh.at.kernel.org \
    --to=robh@kernel.org \
    --cc=a.zummo@towertech.it \
    --cc=alexandre.belloni@bootlin.com \
    --cc=b.zolnierkie@samsung.com \
    --cc=cw00.choi@samsung.com \
    --cc=devicetree@vger.kernel.org \
    --cc=krzysztof.kozlowski@canonical.com \
    --cc=ldewangan@nvidia.com \
    --cc=lee.jones@linaro.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-rtc@vger.kernel.org \
    --cc=linux-watchdog@vger.kernel.org \
    --cc=linux@roeck-us.net \
    --cc=luca@lucaceresoli.net \
    --cc=rdunlap@infradead.org \
    --cc=wim@linux-watchdog.org \
    --cc=woong.byun@samsung.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox