Re: [PATCH v9 4/5] usb: dwc3: qcom: Change the IRQ flag for DP/DM hs phy irq

[Bjorn Andersson <bjorn.andersson@linaro.org>]

On Mon 01 Nov 00:53 PDT 2021, Sandeep Maheswaram wrote:

> Change the IRQ flags for DP/DM hs phy irq to avoid interrupt
> triggering during system suspend.
> 

Why does replacing HIGH with RISING change this behavior, or do you get
a RISING interrupt just before hitting suspend which you ignore?

I think it would be nice to have the commit message for this (or per
below request the DTS change) include some details about what's really
happening on the irq line.

> Signed-off-by: Sandeep Maheswaram <quic_c_sanm@quicinc.com>
> ---
>  drivers/usb/dwc3/dwc3-qcom.c | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/usb/dwc3/dwc3-qcom.c b/drivers/usb/dwc3/dwc3-qcom.c
> index 54461f1..356f4f8 100644
> --- a/drivers/usb/dwc3/dwc3-qcom.c
> +++ b/drivers/usb/dwc3/dwc3-qcom.c
> @@ -473,7 +473,7 @@ static int dwc3_qcom_setup_irq(struct platform_device *pdev)
>  		irq_set_status_flags(irq, IRQ_NOAUTOEN);
>  		ret = devm_request_threaded_irq(qcom->dev, irq, NULL,
>  					qcom_dwc3_resume_irq,
> -					IRQF_TRIGGER_HIGH | IRQF_ONESHOT,
> +					IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING | IRQF_ONESHOT,

IRQF_TRIGGER_* should be omitted from the driver and supplied by the DT.

The dtbs out there should all have IRQ_TYPE_LEVEL_HIGH at this time, so
simply dropping that from this list and updating the dts would be the
right thing to do.

Regards,
Bjorn

>  					"qcom_dwc3 DP_HS", qcom);
>  		if (ret) {
>  			dev_err(qcom->dev, "dp_hs_phy_irq failed: %d\n", ret);
> @@ -488,7 +488,7 @@ static int dwc3_qcom_setup_irq(struct platform_device *pdev)
>  		irq_set_status_flags(irq, IRQ_NOAUTOEN);
>  		ret = devm_request_threaded_irq(qcom->dev, irq, NULL,
>  					qcom_dwc3_resume_irq,
> -					IRQF_TRIGGER_HIGH | IRQF_ONESHOT,
> +					IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
>  					"qcom_dwc3 DM_HS", qcom);
>  		if (ret) {
>  			dev_err(qcom->dev, "dm_hs_phy_irq failed: %d\n", ret);
> -- 
> 2.7.4
>