Re: [PATCH v2 1/2] phy: qualcomm: ipq806x-usb: Fix kernel-doc style

[Bjorn Andersson <bjorn.andersson@linaro.org>]

On Fri 19 Nov 22:15 PST 2021, Vinod Koul wrote:

> The functions are documented but there were style issues, so fix
> the style and add missing description for phy_dwc3
> 
> drivers/phy/qualcomm/phy-qcom-ipq806x-usb.c:130:
> drivers/phy/qualcomm/phy-qcom-ipq806x-usb.c:174:
> drivers/phy/qualcomm/phy-qcom-ipq806x-usb.c:212: warning:
> This comment starts with '/**', but isn't a kernel-doc comment.
> Refer Documentation/doc-guide/kernel-doc.rst
> 

Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>

> Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
> Signed-off-by: Vinod Koul <vkoul@kernel.org>
> ---
> 
> Changes in v2: use () for function names
> update description of @phy_dwc3
> 
>  drivers/phy/qualcomm/phy-qcom-ipq806x-usb.c | 26 +++++++++++----------
>  1 file changed, 14 insertions(+), 12 deletions(-)
> 
> diff --git a/drivers/phy/qualcomm/phy-qcom-ipq806x-usb.c b/drivers/phy/qualcomm/phy-qcom-ipq806x-usb.c
> index bfff0c8c9130..fec1da470d26 100644
> --- a/drivers/phy/qualcomm/phy-qcom-ipq806x-usb.c
> +++ b/drivers/phy/qualcomm/phy-qcom-ipq806x-usb.c
> @@ -127,12 +127,13 @@ struct phy_drvdata {
>  };
>  
>  /**
> - * Write register and read back masked value to confirm it is written
> + * usb_phy_write_readback() - Write register and read back masked value to
> + * confirm it is written
>   *
> - * @base - QCOM DWC3 PHY base virtual address.
> - * @offset - register offset.
> - * @mask - register bitmask specifying what should be updated
> - * @val - value to write.
> + * @phy_dwc3: QCOM DWC3 phy context
> + * @offset: register offset.
> + * @mask: register bitmask specifying what should be updated
> + * @val: value to write.
>   */
>  static inline void usb_phy_write_readback(struct usb_phy *phy_dwc3,
>  					  u32 offset,
> @@ -171,11 +172,11 @@ static int wait_for_latch(void __iomem *addr)
>  }
>  
>  /**
> - * Write SSPHY register
> + * usb_ss_write_phycreg() - Write SSPHY register
>   *
> - * @base - QCOM DWC3 PHY base virtual address.
> - * @addr - SSPHY address to write.
> - * @val - value to write.
> + * @phy_dwc3: QCOM DWC3 phy context
> + * @addr: SSPHY address to write.
> + * @val: value to write.
>   */
>  static int usb_ss_write_phycreg(struct usb_phy *phy_dwc3,
>  				u32 addr, u32 val)
> @@ -209,10 +210,11 @@ static int usb_ss_write_phycreg(struct usb_phy *phy_dwc3,
>  }
>  
>  /**
> - * Read SSPHY register.
> + * usb_ss_read_phycreg() - Read SSPHY register.
>   *
> - * @base - QCOM DWC3 PHY base virtual address.
> - * @addr - SSPHY address to read.
> + * @phy_dwc3: QCOM DWC3 phy context
> + * @addr: SSPHY address to read.
> + * @val: pointer in which read is store.
>   */
>  static int usb_ss_read_phycreg(struct usb_phy *phy_dwc3,
>  			       u32 addr, u32 *val)
> -- 
> 2.31.1
>