Re: [PATCH v3 4/4] arm64: dts: qcom: sdm845-db845c: Remove clock-lanes property from &camss node

Bjorn Andersson
2021-12-06T15:19:59Z

On Thu 18 Nov 04:48 PST 2021, Robert Foss wrote:

> The clock-lanes property is no longer used as it is not programmable by
> the CSIPHY hardware block of Qcom ISPs and should be removed.
>
> Signed-off-by: Robert Foss <robert.foss@linaro.org>

Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Regards,
Bjorn

> ---
> arch/arm64/boot/dts/qcom/sdm845-db845c.dts | 3 ---
> 1 file changed, 3 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
> index 13f80a0b6faa..2cf4b932aee2 100644
> --- a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
> +++ b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
> @@ -1125,7 +1125,6 @@ ports {
> port@0 {
> reg = <0>;
> csiphy0_ep: endpoint {
> - clock-lanes = <7>;
> data-lanes = <0 1 2 3>;
> remote-endpoint = <&ov8856_ep>;
> };
> @@ -1166,7 +1165,6 @@ camera@10 {
>
> port {
> ov8856_ep: endpoint {
> - clock-lanes = <1>;
> link-frequencies = /bits/ 64
> <360000000 180000000>;
> data-lanes = <1 2 3 4>;
> @@ -1211,7 +1209,6 @@ camera@60 {
>
> port {
> ov7251_ep: endpoint {
> - clock-lanes = <1>;
> data-lanes = <0 1>;
> // remote-endpoint = <&csiphy3_ep>;
> };
> --
> 2.32.0
>