From: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
To: linux-kernel@vger.kernel.org, netdev@vger.kernel.org
Cc: Peter Zijlstra <peterz@infradead.org>,
Thomas Gleixner <tglx@linutronix.de>,
Jakub Kicinski <kuba@kernel.org>,
"David S. Miller" <davem@davemloft.net>
Subject: [PATCH net-next] u64_stats: Disable preemption on 32bit UP+SMP PREEMPT_RT during updates.
Date: Fri, 10 Dec 2021 21:29:59 +0100 [thread overview]
Message-ID: <YbO4x7vRoDGUWxrv@linutronix.de> (raw)
On PREEMPT_RT the seqcount_t for synchronisation is required on 32bit
architectures even on UP because the softirq (and the threaded IRQ handler) can
be preempted.
With the seqcount_t for synchronisation, a reader with higher priority can
preempt the writer and then spin endlessly in read_seqcount_begin() while the
writer can't make progress.
To avoid such a lock up on PREEMPT_RT the writer must disable preemption during
the update. There is no need to disable interrupts because no writer is using
this API in hard-IRQ context on PREEMPT_RT.
Disable preemption on 32bit-RT within the u64_stats write section.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
---
include/linux/u64_stats_sync.h | 42 +++++++++++++++++++++++++++--------------
1 file changed, 28 insertions(+), 14 deletions(-)
--- a/include/linux/u64_stats_sync.h
+++ b/include/linux/u64_stats_sync.h
@@ -66,7 +66,7 @@
#include <linux/seqlock.h>
struct u64_stats_sync {
-#if BITS_PER_LONG==32 && defined(CONFIG_SMP)
+#if BITS_PER_LONG == 32 && (defined(CONFIG_SMP) || defined(CONFIG_PREEMPT_RT))
seqcount_t seq;
#endif
};
@@ -125,7 +125,7 @@ static inline void u64_stats_inc(u64_sta
}
#endif
-#if BITS_PER_LONG == 32 && defined(CONFIG_SMP)
+#if BITS_PER_LONG == 32 && (defined(CONFIG_SMP) || defined(CONFIG_PREEMPT_RT))
#define u64_stats_init(syncp) seqcount_init(&(syncp)->seq)
#else
static inline void u64_stats_init(struct u64_stats_sync *syncp)
@@ -135,15 +135,19 @@ static inline void u64_stats_init(struct
static inline void u64_stats_update_begin(struct u64_stats_sync *syncp)
{
-#if BITS_PER_LONG==32 && defined(CONFIG_SMP)
+#if BITS_PER_LONG == 32 && (defined(CONFIG_SMP) || defined(CONFIG_PREEMPT_RT))
+ if (IS_ENABLED(CONFIG_PREEMPT_RT))
+ preempt_disable();
write_seqcount_begin(&syncp->seq);
#endif
}
static inline void u64_stats_update_end(struct u64_stats_sync *syncp)
{
-#if BITS_PER_LONG==32 && defined(CONFIG_SMP)
+#if BITS_PER_LONG == 32 && (defined(CONFIG_SMP) || defined(CONFIG_PREEMPT_RT))
write_seqcount_end(&syncp->seq);
+ if (IS_ENABLED(CONFIG_PREEMPT_RT))
+ preempt_enable();
#endif
}
@@ -152,8 +156,11 @@ u64_stats_update_begin_irqsave(struct u6
{
unsigned long flags = 0;
-#if BITS_PER_LONG==32 && defined(CONFIG_SMP)
- local_irq_save(flags);
+#if BITS_PER_LONG == 32 && (defined(CONFIG_SMP) || defined(CONFIG_PREEMPT_RT))
+ if (IS_ENABLED(CONFIG_PREEMPT_RT))
+ preempt_disable();
+ else
+ local_irq_save(flags);
write_seqcount_begin(&syncp->seq);
#endif
return flags;
@@ -163,15 +170,18 @@ static inline void
u64_stats_update_end_irqrestore(struct u64_stats_sync *syncp,
unsigned long flags)
{
-#if BITS_PER_LONG==32 && defined(CONFIG_SMP)
+#if BITS_PER_LONG == 32 && (defined(CONFIG_SMP) || defined(CONFIG_PREEMPT_RT))
write_seqcount_end(&syncp->seq);
- local_irq_restore(flags);
+ if (IS_ENABLED(CONFIG_PREEMPT_RT))
+ preempt_enable();
+ else
+ local_irq_restore(flags);
#endif
}
static inline unsigned int __u64_stats_fetch_begin(const struct u64_stats_sync *syncp)
{
-#if BITS_PER_LONG==32 && defined(CONFIG_SMP)
+#if BITS_PER_LONG == 32 && (defined(CONFIG_SMP) || defined(CONFIG_PREEMPT_RT))
return read_seqcount_begin(&syncp->seq);
#else
return 0;
@@ -180,7 +190,7 @@ static inline unsigned int __u64_stats_f
static inline unsigned int u64_stats_fetch_begin(const struct u64_stats_sync *syncp)
{
-#if BITS_PER_LONG==32 && !defined(CONFIG_SMP)
+#if BITS_PER_LONG == 32 && (!defined(CONFIG_SMP) && !defined(CONFIG_PREEMPT_RT))
preempt_disable();
#endif
return __u64_stats_fetch_begin(syncp);
@@ -189,7 +199,7 @@ static inline unsigned int u64_stats_fet
static inline bool __u64_stats_fetch_retry(const struct u64_stats_sync *syncp,
unsigned int start)
{
-#if BITS_PER_LONG==32 && defined(CONFIG_SMP)
+#if BITS_PER_LONG == 32 && (defined(CONFIG_SMP) || defined(CONFIG_PREEMPT_RT))
return read_seqcount_retry(&syncp->seq, start);
#else
return false;
@@ -199,7 +209,7 @@ static inline bool __u64_stats_fetch_ret
static inline bool u64_stats_fetch_retry(const struct u64_stats_sync *syncp,
unsigned int start)
{
-#if BITS_PER_LONG==32 && !defined(CONFIG_SMP)
+#if BITS_PER_LONG == 32 && (!defined(CONFIG_SMP) && !defined(CONFIG_PREEMPT_RT))
preempt_enable();
#endif
return __u64_stats_fetch_retry(syncp, start);
@@ -213,7 +223,9 @@ static inline bool u64_stats_fetch_retry
*/
static inline unsigned int u64_stats_fetch_begin_irq(const struct u64_stats_sync *syncp)
{
-#if BITS_PER_LONG==32 && !defined(CONFIG_SMP)
+#if BITS_PER_LONG == 32 && defined(CONFIG_PREEMPT_RT)
+ preempt_disable();
+#elif BITS_PER_LONG == 32 && !defined(CONFIG_SMP)
local_irq_disable();
#endif
return __u64_stats_fetch_begin(syncp);
@@ -222,7 +234,9 @@ static inline unsigned int u64_stats_fet
static inline bool u64_stats_fetch_retry_irq(const struct u64_stats_sync *syncp,
unsigned int start)
{
-#if BITS_PER_LONG==32 && !defined(CONFIG_SMP)
+#if BITS_PER_LONG == 32 && defined(CONFIG_PREEMPT_RT)
+ preempt_enable();
+#elif BITS_PER_LONG == 32 && !defined(CONFIG_SMP)
local_irq_enable();
#endif
return __u64_stats_fetch_retry(syncp, start);
next reply other threads:[~2021-12-10 20:30 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-12-10 20:29 Sebastian Andrzej Siewior [this message]
2021-12-13 12:50 ` [PATCH net-next] u64_stats: Disable preemption on 32bit UP+SMP PREEMPT_RT during updates patchwork-bot+netdevbpf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=YbO4x7vRoDGUWxrv@linutronix.de \
--to=bigeasy@linutronix.de \
--cc=davem@davemloft.net \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=peterz@infradead.org \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox