[PATCH v3] i2c: tegra: use i2c_timings for bus clock freq

Akhil R
2021-12-10T12:16:18Z

Use i2c_timings struct and corresponding methods to get bus clock frequency

Signed-off-by: Akhil R <akhilrajeev@nvidia.com>
Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
---
drivers/i2c/busses/i2c-tegra.c | 21 +++++++++------------
1 file changed, 9 insertions(+), 12 deletions(-)

v2->v3: Removed unused variable 'err'.
v1->v2: Added temp var for i2c_timings struct in function.

diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c
index a5be8f0..93b61c4 100644
--- a/drivers/i2c/busses/i2c-tegra.c
+++ b/drivers/i2c/busses/i2c-tegra.c
@@ -246,7 +246,7 @@ struct tegra_i2c_hw_feature {
* @msg_buf: pointer to current message data
* @msg_buf_remaining: size of unsent data in the message buffer
* @msg_read: indicates that the transfer is a read access
- * @bus_clk_rate: current I2C bus clock rate
+ * @timings: i2c timings information like bus frequency
* @multimaster_mode: indicates that I2C controller is in multi-master mode
* @tx_dma_chan: DMA transmit channel
* @rx_dma_chan: DMA receive channel
@@ -273,7 +273,7 @@ struct tegra_i2c_dev {
unsigned int nclocks;

struct clk *div_clk;
- u32 bus_clk_rate;
+ struct i2c_timings timings;

struct completion msg_complete;
size_t msg_buf_remaining;
@@ -610,6 +610,7 @@ static int tegra_i2c_init(struct tegra_i2c_dev *i2c_dev)
{
u32 val, clk_divisor, clk_multiplier, tsu_thd, tlow, thigh, non_hs_mode;
acpi_handle handle = ACPI_HANDLE(i2c_dev->dev);
+ struct i2c_timings *t = &i2c_dev->timings;
int err;

/*
@@ -642,14 +643,14 @@ static int tegra_i2c_init(struct tegra_i2c_dev *i2c_dev)
if (i2c_dev->is_vi)
tegra_i2c_vi_init(i2c_dev);

- switch (i2c_dev->bus_clk_rate) {
+ switch (t->bus_freq_hz) {
case I2C_MAX_STANDARD_MODE_FREQ + 1 ... I2C_MAX_FAST_MODE_PLUS_FREQ:
default:
tlow = i2c_dev->hw->tlow_fast_fastplus_mode;
thigh = i2c_dev->hw->thigh_fast_fastplus_mode;
tsu_thd = i2c_dev->hw->setup_hold_time_fast_fast_plus_mode;

- if (i2c_dev->bus_clk_rate > I2C_MAX_FAST_MODE_FREQ)
+ if (t->bus_freq_hz > I2C_MAX_FAST_MODE_FREQ)
non_hs_mode = i2c_dev->hw->clk_divisor_fast_plus_mode;
else
non_hs_mode = i2c_dev->hw->clk_divisor_fast_mode;
@@ -685,7 +686,7 @@ static int tegra_i2c_init(struct tegra_i2c_dev *i2c_dev)
clk_multiplier = (tlow + thigh + 2) * (non_hs_mode + 1);

err = clk_set_rate(i2c_dev->div_clk,
- i2c_dev->bus_clk_rate * clk_multiplier);
+ t->bus_freq_hz * clk_multiplier);
if (err) {
dev_err(i2c_dev->dev, "failed to set div-clk rate: %d\n", err);
return err;
@@ -724,7 +725,7 @@ static int tegra_i2c_disable_packet_mode(struct tegra_i2c_dev *i2c_dev)
* before disabling the controller so that the STOP condition has
* been delivered properly.
*/
- udelay(DIV_ROUND_UP(2 * 1000000, i2c_dev->bus_clk_rate));
+ udelay(DIV_ROUND_UP(2 * 1000000, i2c_dev->timings.bus_freq_hz));

cnfg = i2c_readl(i2c_dev, I2C_CNFG);
if (cnfg & I2C_CNFG_PACKET_MODE_EN)
@@ -1254,7 +1255,7 @@ static int tegra_i2c_xfer_msg(struct tegra_i2c_dev *i2c_dev,
* Total bits = 9 bits per byte (including ACK bit) + Start & stop bits
*/
xfer_time += DIV_ROUND_CLOSEST(((xfer_size * 9) + 2) * MSEC_PER_SEC,
- i2c_dev->bus_clk_rate);
+ i2c_dev->timings.bus_freq_hz);

int_mask = I2C_INT_NO_ACK | I2C_INT_ARBITRATION_LOST;
tegra_i2c_unmask_irq(i2c_dev, int_mask);
@@ -1631,12 +1632,8 @@ static void tegra_i2c_parse_dt(struct tegra_i2c_dev *i2c_dev)
{
struct device_node *np = i2c_dev->dev->of_node;
bool multi_mode;
- int err;

- err = device_property_read_u32(i2c_dev->dev, "clock-frequency",
- &i2c_dev->bus_clk_rate);
- if (err)
- i2c_dev->bus_clk_rate = I2C_MAX_STANDARD_MODE_FREQ;
+ i2c_parse_fw_timings(i2c_dev->dev, &i2c_dev->timings, true);

multi_mode = device_property_read_bool(i2c_dev->dev, "multi-master");
i2c_dev->multimaster_mode = multi_mode;
--
2.7.4