[PATCH 00/10] dt-binding patches for sm6350

Luca Weiss
2021-12-13T08:27:14Z

This series adds compatibles to the dt-bindings documentation where it
was missed before.

Finally, the last patch solves some further dtbs_check errors by
modifying the sm6350.dtsi to match the binding docs more closely.

Please note, that the first patch from Konrad is a resend that wasn't
picked up when sent to the lists in August 2021.

Konrad Dybcio (1):
dt-bindings: arm: msm: Add LLCC for SM6350

Luca Weiss (9):
dt-bindings: firmware: scm: Add SM6350 compatible
dt-bindings: qcom,pdc: Add SM6350 compatible
dt-bindings: phy: qcom,qusb2: Add SM6350 compatible
dt-bindings: thermal: tsens: Add SM6350 compatible
dt-bindings: usb: qcom,dwc3: Add SM6350 compatible
dt-bindings: watchdog: Add SM6350 and SM8250 compatible
dt-bindings: arm: msm: Don't mark LLCC interrupt as required
dt-bindings: simple-framebuffer: allow standalone compatible
arm64: dts: qcom: sm6350: Fix validation errors

.../devicetree/bindings/arm/msm/qcom,llcc.yaml | 2 +-
.../bindings/display/simple-framebuffer.yaml | 12 +++++++-----
.../devicetree/bindings/firmware/qcom,scm.txt | 1 +
.../bindings/interrupt-controller/qcom,pdc.txt | 5 +++--
.../devicetree/bindings/phy/qcom,qusb2-phy.yaml | 1 +
.../devicetree/bindings/thermal/qcom-tsens.yaml | 1 +
.../devicetree/bindings/usb/qcom,dwc3.yaml | 1 +
.../devicetree/bindings/watchdog/qcom-wdt.yaml | 2 ++
arch/arm64/boot/dts/qcom/sm6350.dtsi | 16 ++++++++--------
9 files changed, 25 insertions(+), 16 deletions(-)

--
2.34.1