From: Rob Herring <robh@kernel.org>
To: Thierry Reding <thierry.reding@gmail.com>
Cc: Lee Jones <lee.jones@linaro.org>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH 5/6] dt-bindings: regulator: tps6586x: Convert to json-schema
Date: Tue, 21 Dec 2021 14:59:00 -0400 [thread overview]
Message-ID: <YcIj9FMp/ba0gH3t@robh.at.kernel.org> (raw)
In-Reply-To: <20211217170507.2843568-5-thierry.reding@gmail.com>
On Fri, Dec 17, 2021 at 06:05:06PM +0100, Thierry Reding wrote:
> From: Thierry Reding <treding@nvidia.com>
>
> Convert the Texas Instruments TPS6586x bindings from the free-form text
> format to json-schema.
>
> Signed-off-by: Thierry Reding <treding@nvidia.com>
> ---
> .../bindings/regulator/ti,tps6586x.yaml | 184 ++++++++++++++++++
> .../bindings/regulator/tps6586x.txt | 135 -------------
> 2 files changed, 184 insertions(+), 135 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/regulator/ti,tps6586x.yaml
> delete mode 100644 Documentation/devicetree/bindings/regulator/tps6586x.txt
>
> diff --git a/Documentation/devicetree/bindings/regulator/ti,tps6586x.yaml b/Documentation/devicetree/bindings/regulator/ti,tps6586x.yaml
> new file mode 100644
> index 000000000000..c5ea7012c653
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/regulator/ti,tps6586x.yaml
> @@ -0,0 +1,184 @@
> +# SPDX-License-Identifier: GPL-2.0-only
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/regulator/ti,tps6586x.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Texas Instruments TPS6586x family of voltage regulator
> +
> +maintainers:
> + - Mark Brown <broonie@kernel.org>
> +
> +properties:
> + compatible:
> + const: ti,tps6586x
> +
> + reg:
> + maxItems: 1
> +
> + interrupts:
> + maxItems: 1
> +
> + sys-supply:
> + description: input supply for SYS
> +
> + vin-sm0-supply:
> + description: input supply for SM0
> +
> + vin-sm1-supply:
> + description: input supply for SM1
> +
> + vin-sm2-supply:
> + description: input supply for SM2
> +
> + vinldo01-supply:
> + description: input supply for LDO0 and LDO1
> +
> + vinldo23-supply:
> + description: input supply for LDO2 and LDO3
> +
> + vinldo4-supply:
> + description: input supply for LDO4
> +
> + vinldo678-supply:
> + description: input supply for LDO6, LDO7 and LDO8
> +
> + vinldo9-supply:
> + description: input supply for LDO9
> +
> + ti,system-power-controller:
> + $ref: /schemas/types.yaml#/definitions/flag
> + description: If this property exists, it specifies that this PMIC controls the system power.
> +
> + regulators:
> + type: object
> + description: |
> + A node that houses a sub-node for each regulator within the device. Each sub-node is
> + identified using the node's name (or the deprecated regulator-compatible property if
> + present), with valid values listed below. The content of each sub-node is defined by the
> + standard binding for regulators; see regulator.yaml.
> +
> + Note: LDO5 and LDO_RTC is supplied by SYS regulator internally and the operating system
> + needs to take care of establishing the proper parent child relationships.
> +
> + patternProperties:
> + "^sys|sm[0-2]|ldo[0-9]|ldo_rtc$":
> + $ref: regulator.yaml
> +
> +allOf:
> + - $ref: /schemas/gpio/gpio.yaml
You need to define #gpio-cells value. Usually we don't reference
gpio.yaml because of that and it's just 'gpio-controller' in addition.
> +
> +unevaluatedProperties: false
> +
> +required:
> + - compatible
> + - reg
> + - interrupts
> +
> +examples:
> + - |
> + i2c {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + pmic@34 {
> + compatible = "ti,tps6586x";
> + reg = <0x34>;
> + interrupts = <0 88 0x4>;
> +
> + #gpio-cells = <2>;
> + gpio-controller;
> +
> + ti,system-power-controller;
> +
> + sys-supply = <&dummy>;
> + vin-sm0-supply = <&dummy>;
> + vin-sm1-supply = <&dummy>;
> + vin-sm2-supply = <&dummy>;
> + vinldo01-supply = <&dummy>;
> + vinldo23-supply = <&dummy>;
> + vinldo4-supply = <&dummy>;
> + vinldo678-supply = <&dummy>;
> + vinldo9-supply = <&dummy>;
> +
> + regulators {
> + sys {
> + regulator-name = "vdd_sys";
> + regulator-boot-on;
> + regulator-always-on;
> + };
> +
> + sm0 {
> + regulator-min-microvolt = < 725000>;
> + regulator-max-microvolt = <1500000>;
> + regulator-boot-on;
> + regulator-always-on;
> + };
> +
> + sm1 {
> + regulator-min-microvolt = < 725000>;
> + regulator-max-microvolt = <1500000>;
> + regulator-boot-on;
> + regulator-always-on;
> + };
> +
> + sm2 {
> + regulator-min-microvolt = <3000000>;
> + regulator-max-microvolt = <4550000>;
> + regulator-boot-on;
> + regulator-always-on;
> + };
> +
> + ldo0 {
> + regulator-name = "PCIE CLK";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + };
> +
> + ldo1 {
> + regulator-min-microvolt = < 725000>;
> + regulator-max-microvolt = <1500000>;
> + };
> +
> + ldo2 {
> + regulator-min-microvolt = < 725000>;
> + regulator-max-microvolt = <1500000>;
> + };
> +
> + ldo3 {
> + regulator-min-microvolt = <1250000>;
> + regulator-max-microvolt = <3300000>;
> + };
> +
> + ldo4 {
> + regulator-min-microvolt = <1700000>;
> + regulator-max-microvolt = <2475000>;
> + };
> +
> + ldo5 {
> + regulator-min-microvolt = <1250000>;
> + regulator-max-microvolt = <3300000>;
> + };
> +
> + ldo6 {
> + regulator-min-microvolt = <1250000>;
> + regulator-max-microvolt = <3300000>;
> + };
> +
> + ldo7 {
> + regulator-min-microvolt = <1250000>;
> + regulator-max-microvolt = <3300000>;
> + };
> +
> + ldo8 {
> + regulator-min-microvolt = <1250000>;
> + regulator-max-microvolt = <3300000>;
> + };
> +
> + ldo9 {
> + regulator-min-microvolt = <1250000>;
> + regulator-max-microvolt = <3300000>;
> + };
> + };
> + };
> + };
> diff --git a/Documentation/devicetree/bindings/regulator/tps6586x.txt b/Documentation/devicetree/bindings/regulator/tps6586x.txt
> deleted file mode 100644
> index 8b40cac24d93..000000000000
> --- a/Documentation/devicetree/bindings/regulator/tps6586x.txt
> +++ /dev/null
> @@ -1,135 +0,0 @@
> -TPS6586x family of regulators
> -
> -Required properties:
> -- compatible: "ti,tps6586x"
> -- reg: I2C slave address
> -- interrupts: the interrupt outputs of the controller
> -- #gpio-cells: number of cells to describe a GPIO
> -- gpio-controller: mark the device as a GPIO controller
> -- regulators: A node that houses a sub-node for each regulator within the
> - device. Each sub-node is identified using the node's name (or the deprecated
> - regulator-compatible property if present), with valid values listed below.
> - The content of each sub-node is defined by the standard binding for
> - regulators; see regulator.txt.
> - sys, sm[0-2], ldo[0-9] and ldo_rtc
> -- sys-supply: The input supply for SYS.
> -- vin-sm0-supply: The input supply for the SM0.
> -- vin-sm1-supply: The input supply for the SM1.
> -- vin-sm2-supply: The input supply for the SM2.
> -- vinldo01-supply: The input supply for the LDO1 and LDO2
> -- vinldo23-supply: The input supply for the LDO2 and LDO3
> -- vinldo4-supply: The input supply for the LDO4
> -- vinldo678-supply: The input supply for the LDO6, LDO7 and LDO8
> -- vinldo9-supply: The input supply for the LDO9
> -
> -Optional properties:
> -- ti,system-power-controller: Telling whether or not this pmic is controlling
> - the system power.
> -
> -Each regulator is defined using the standard binding for regulators.
> -
> -Note: LDO5 and LDO_RTC is supplied by SYS regulator internally and driver
> - take care of making proper parent child relationship.
> -
> -Example:
> -
> - pmu: tps6586x@34 {
> - compatible = "ti,tps6586x";
> - reg = <0x34>;
> - interrupts = <0 88 0x4>;
> -
> - #gpio-cells = <2>;
> - gpio-controller;
> -
> - ti,system-power-controller;
> -
> - sys-supply = <&some_reg>;
> - vin-sm0-supply = <&some_reg>;
> - vin-sm1-supply = <&some_reg>;
> - vin-sm2-supply = <&some_reg>;
> - vinldo01-supply = <...>;
> - vinldo23-supply = <...>;
> - vinldo4-supply = <...>;
> - vinldo678-supply = <...>;
> - vinldo9-supply = <...>;
> -
> - regulators {
> - sys_reg: sys {
> - regulator-name = "vdd_sys";
> - regulator-boot-on;
> - regulator-always-on;
> - };
> -
> - sm0_reg: sm0 {
> - regulator-min-microvolt = < 725000>;
> - regulator-max-microvolt = <1500000>;
> - regulator-boot-on;
> - regulator-always-on;
> - };
> -
> - sm1_reg: sm1 {
> - regulator-min-microvolt = < 725000>;
> - regulator-max-microvolt = <1500000>;
> - regulator-boot-on;
> - regulator-always-on;
> - };
> -
> - sm2_reg: sm2 {
> - regulator-min-microvolt = <3000000>;
> - regulator-max-microvolt = <4550000>;
> - regulator-boot-on;
> - regulator-always-on;
> - };
> -
> - ldo0_reg: ldo0 {
> - regulator-name = "PCIE CLK";
> - regulator-min-microvolt = <3300000>;
> - regulator-max-microvolt = <3300000>;
> - };
> -
> - ldo1_reg: ldo1 {
> - regulator-min-microvolt = < 725000>;
> - regulator-max-microvolt = <1500000>;
> - };
> -
> - ldo2_reg: ldo2 {
> - regulator-min-microvolt = < 725000>;
> - regulator-max-microvolt = <1500000>;
> - };
> -
> - ldo3_reg: ldo3 {
> - regulator-min-microvolt = <1250000>;
> - regulator-max-microvolt = <3300000>;
> - };
> -
> - ldo4_reg: ldo4 {
> - regulator-min-microvolt = <1700000>;
> - regulator-max-microvolt = <2475000>;
> - };
> -
> - ldo5_reg: ldo5 {
> - regulator-min-microvolt = <1250000>;
> - regulator-max-microvolt = <3300000>;
> - };
> -
> - ldo6_reg: ldo6 {
> - regulator-min-microvolt = <1250000>;
> - regulator-max-microvolt = <3300000>;
> - };
> -
> - ldo7_reg: ldo7 {
> - regulator-min-microvolt = <1250000>;
> - regulator-max-microvolt = <3300000>;
> - };
> -
> - ldo8_reg: ldo8 {
> - regulator-min-microvolt = <1250000>;
> - regulator-max-microvolt = <3300000>;
> - };
> -
> - ldo9_reg: ldo9 {
> - regulator-min-microvolt = <1250000>;
> - regulator-max-microvolt = <3300000>;
> - };
> - };
> - };
> --
> 2.34.1
>
>
next prev parent reply other threads:[~2021-12-21 18:59 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-12-17 17:05 [PATCH 1/6] dt-bindings: regulator: palmas: Convert to json-schema Thierry Reding
2021-12-17 17:05 ` [PATCH 2/6] dt-bindings: regulator: pwm: " Thierry Reding
2021-12-18 18:08 ` Rob Herring
2021-12-21 18:49 ` Rob Herring
2021-12-17 17:05 ` [PATCH 3/6] dt-bindings: regulator: tps51632: " Thierry Reding
2021-12-21 18:51 ` Rob Herring
2021-12-17 17:05 ` [PATCH 4/6] dt-bindings: regulator: tps62360: " Thierry Reding
2021-12-21 18:52 ` Rob Herring
2021-12-17 17:05 ` [PATCH 5/6] dt-bindings: regulator: tps6586x: " Thierry Reding
2021-12-18 18:08 ` Rob Herring
2021-12-21 18:59 ` Rob Herring [this message]
2021-12-17 17:05 ` [PATCH 6/6] dt-bindings: regulator: tps65090: " Thierry Reding
2021-12-21 19:00 ` Rob Herring
2021-12-18 18:08 ` [PATCH 1/6] dt-bindings: regulator: palmas: " Rob Herring
2021-12-21 14:15 ` Rob Herring
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=YcIj9FMp/ba0gH3t@robh.at.kernel.org \
--to=robh@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=lee.jones@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=thierry.reding@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox