[PATCH 3/4] arm64: dts: qcom: pm6150l: Add wled node

Luca Weiss
2021-12-29T17:04:47Z

WLED is used for controlling the backlight on some boards, add the node
for it.

Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
---
arch/arm64/boot/dts/qcom/pm6150l.dtsi | 10 ++++++++++
1 file changed, 10 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/pm6150l.dtsi b/arch/arm64/boot/dts/qcom/pm6150l.dtsi
index 3ca2860bb0cf..7aa2ef90cb6a 100644
--- a/arch/arm64/boot/dts/qcom/pm6150l.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm6150l.dtsi
@@ -52,5 +52,15 @@ pm6150l_lsid5: pmic@5 {
reg = <0x5 SPMI_USID>;
#address-cells = <1>;
#size-cells = <0>;
+
+ pm6150l_wled: leds@d800 {
+ compatible = "qcom,pm6150l-wled";
+ reg = <0xd800>, <0xd900>;
+ interrupts = <0x5 0xd8 0x1 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "ovp";
+ label = "backlight";
+
+ status = "disabled";
+ };
};
};
--
2.34.1