Re: [PATCH v2] riscv: fix oops caused by irq on/off tracer

[Jisheng Zhang <jszhang@kernel.org>]

On Thu, Feb 10, 2022 at 09:37:58PM +0800, Changbin Du wrote:
> On Thu, Feb 10, 2022 at 01:32:59AM +0800, Jisheng Zhang wrote:
> [snip]
> > Hi Changbin,
> > 
> > I read the code and find that current riscv frame records during
> > exception isn't as completed as other architectures. riscv only
> > records frames from the ret_from_exception(). If we add completed
> What do you mean for 'record'?
> 

stack frame record.

> > frame records as other arch do, then the issue you saw can also
> > be fixed at the same time.
> > 
> I don't think so. The problem is __builtin_return_address(1) trigger page fault
> here.

There's misunderstanding here. I interpret this bug as incomplete
stackframes.

This is current riscv stackframe during exception:

high
 	----------------
top	|		|  <- ret_from_exception
	----------------
	|		|  <- trace_hardirqs_on
	-----------------
low

As you said, the CALLER_ADDR1 a.k.a __builtin_return_address(1) needs
at least two parent call frames. 

If we complete the stackframes during exception as other arch does:

high
 	----------------
top	|		|  <- the synthetic stackframe from the interrupted point
 	----------------
	      .....	      
        ----------------
	|		|  <- ret_from_exception
	----------------
	|		|  <- trace_hardirqs_on
	-----------------
low


Then we meet the "at least two parent call frames" requirement. IOW, my
solution solve the problem from the entry.S side. One of the advantages
would be we let interrupted point show up in dump_stack() as other arch
do. What I'm not sure is whether it's safe to do so now since rc3 is
released.

> 
> > However, I'm not sure what's the best choice now.
> > 
> > A simple demo to this incomplete frames:
> > add dump_stack() in any ISR, then
> > 
> > in riscv:
> > [    2.961294] Call Trace:
> > [    2.961460] [<ffffffff8000485e>] dump_backtrace+0x1c/0x24
> > [    2.961823] [<ffffffff805ed980>] show_stack+0x2c/0x38
> > [    2.962153] [<ffffffff805f292e>] dump_stack_lvl+0x40/0x58
> > [    2.962483] [<ffffffff805f295a>] dump_stack+0x14/0x1c
> > [    2.962792] [<ffffffff805f31a0>] serial8250_interrupt+0x20/0x82
> > [    2.963139] [<ffffffff80053032>] __handle_irq_event_percpu+0x4c/0x106
> > [    2.963526] [<ffffffff80053170>] handle_irq_event+0x38/0x80
> > [    2.963856] [<ffffffff80056a32>] handle_fasteoi_irq+0x96/0x188
> > [    2.964198] [<ffffffff800526ce>] generic_handle_domain_irq+0x28/0x3a
> > [    2.964567] [<ffffffff802f0ae4>] plic_handle_irq+0x88/0xec
> > [    2.964896] [<ffffffff800526ce>] generic_handle_domain_irq+0x28/0x3a
> > [    2.965264] [<ffffffff802f08e4>] riscv_intc_irq+0x34/0x5c
> > [    2.965584] [<ffffffff805f6dc8>] generic_handle_arch_irq+0x4a/0x74
> > [    2.966068] [<ffffffff80002fe8>] ret_from_exception+0x0/0xc
> > 
> > in x86:
> > [    1.191274] Call Trace:
> > [    1.192223]  <IRQ>
> > [    1.192758]  dump_stack_lvl+0x45/0x59
> > [    1.192982]  serial8250_interrupt+0x24/0x88
> > [    1.193105]  __handle_irq_event_percpu+0x66/0x1b0
> > [    1.193239]  handle_irq_event+0x34/0x70
> > [    1.193345]  handle_edge_irq+0x85/0x1e0
> > [    1.193455]  __common_interrupt+0x38/0x90
> > [    1.193573]  common_interrupt+0x73/0x90
> > [    1.193809]  </IRQ>
> > [    1.193889]  <TASK>
> > [    1.193956]  asm_common_interrupt+0x1b/0x40
> > [    1.194318] RIP: 0010:_raw_spin_unlock_irqrestore+0x1b/0x40
> > [    1.194566] Code: 24 be 01 02 00 00 e9 54 20 bf ff 0f 1f 40 00 0f 1f
> > 44 00 00 f7 c6 00f
> > [    1.195137] RSP: 0000:ffff888000243b68 EFLAGS: 00000246
> > [    1.195314] RAX: 0000000000000000 RBX: ffffffff82025840 RCX:
> > 0000000000000000
> > [    1.195482] RDX: 0000000000000001 RSI: 0000000000000000 RDI:
> > 0000000000000001
> > [    1.195645] RBP: 0000000000000202 R08: ffffffffffffffff R09:
> > 0000000000000000
> > [    1.195808] R10: 00000000000000eb R11: 0000000000000000 R12:
> > 0000000000000000
> > [    1.195972] R13: 0000000000000040 R14: 0000000000000000 R15:
> > ffff888000c39000
> > [    1.196245]  ? _raw_spin_unlock_irqrestore+0x15/0x40
> > [    1.196373]  serial8250_do_startup+0x42d/0x600
> > [    1.196502]  uart_port_startup+0x11b/0x270
> > [    1.196619]  uart_port_activate+0x3f/0x60
> > [    1.196729]  tty_port_open+0x7e/0xd0
> > [    1.196835]  ? _raw_spin_unlock+0x12/0x30
> > [    1.196942]  uart_open+0x1a/0x30
> > [    1.197036]  tty_open+0x153/0x7c0
> > [    1.197144]  chrdev_open+0xbf/0x230
> > [    1.197253]  ? cdev_device_add+0x90/0x90
> > [    1.197359]  do_dentry_open+0x13c/0x360
> > [    1.197470]  path_openat+0xb0c/0xe00
> > [    1.197577]  ? update_load_avg+0x5f/0x640
> > [    1.197691]  ? finish_task_switch.isra.0+0xac/0x240
> > [    1.197821]  do_filp_open+0xb2/0x150
> > [    1.197935]  ? preempt_schedule_thunk+0x16/0x18
> > [    1.198049]  ? preempt_schedule_common+0x90/0xd0
> > [    1.198167]  ? preempt_schedule_thunk+0x16/0x18
> > [    1.198291]  file_open_name+0xf1/0x1b0
> > [    1.198397]  filp_open+0x2c/0x50
> > [    1.198495]  console_on_rootfs+0x19/0x52
> > [    1.198648]  kernel_init_freeable+0x19a/0x1c7
> > [    1.198765]  ? rest_init+0xc0/0xc0
> > [    1.198867]  kernel_init+0x16/0x110
> > [    1.198965]  ret_from_fork+0x1f/0x30
> > [    1.199131]  </TASK>
> > 
> As I said before, this issue is not related to stackdump.
> 
> Besides, you can see more calltrace on x86 that because x86 iterate all stacks
> (kernel, irq or exception) when dumping stacktrace. While RISCV only show
> calltrace of current stack.
> 

I'm not sure whether there's misunderstanding. See above.

Thanks