From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
To: Javier Martinez Canillas <javierm@redhat.com>
Cc: linux-kernel@vger.kernel.org,
"Daniel Vetter" <daniel.vetter@ffwll.ch>,
linux-fbdev@vger.kernel.org, "Sam Ravnborg" <sam@ravnborg.org>,
"Maxime Ripard" <maxime@cerno.tech>,
dri-devel@lists.freedesktop.org,
"Noralf Trønnes" <noralf@tronnes.org>,
"Geert Uytterhoeven" <geert@linux-m68k.org>,
"Thomas Zimmermann" <tzimmermann@suse.de>,
"Daniel Vetter" <daniel@ffwll.ch>,
"David Airlie" <airlied@linux.ie>,
"Maarten Lankhorst" <maarten.lankhorst@linux.intel.com>,
"Maxime Ripard" <mripard@kernel.org>
Subject: Re: [PATCH v5 1/6] drm/format-helper: Add drm_fb_xrgb8888_to_gray8_line()
Date: Fri, 11 Feb 2022 17:58:44 +0200 [thread overview]
Message-ID: <YgaHtHZws8GOUPAk@smile.fi.intel.com> (raw)
In-Reply-To: <20220211143358.3112958-2-javierm@redhat.com>
On Fri, Feb 11, 2022 at 03:33:53PM +0100, Javier Martinez Canillas wrote:
> Pull the per-line conversion logic into a separate helper function.
>
> This will allow to do line-by-line conversion in other helpers that
> convert to a gray8 format.
for-loop vs. while-loop is not critical, so
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
> Suggested-by: Thomas Zimmermann <tzimmermann@suse.de>
> Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
> Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
> ---
>
> Changes in v5:
> - Add Thomas Zimmermann's Reviewed-by to patch #1.
>
> Changes in v3:
> - Add a drm_fb_xrgb8888_to_gray8_line() helper function (Thomas Zimmermann)
>
> drivers/gpu/drm/drm_format_helper.c | 31 ++++++++++++++++++-----------
> 1 file changed, 19 insertions(+), 12 deletions(-)
>
> diff --git a/drivers/gpu/drm/drm_format_helper.c b/drivers/gpu/drm/drm_format_helper.c
> index 0f28dd2bdd72..b981712623d3 100644
> --- a/drivers/gpu/drm/drm_format_helper.c
> +++ b/drivers/gpu/drm/drm_format_helper.c
> @@ -464,6 +464,21 @@ void drm_fb_xrgb8888_to_xrgb2101010_toio(void __iomem *dst,
> }
> EXPORT_SYMBOL(drm_fb_xrgb8888_to_xrgb2101010_toio);
>
> +static void drm_fb_xrgb8888_to_gray8_line(u8 *dst, const u32 *src, unsigned int pixels)
> +{
> + unsigned int x;
> +
> + for (x = 0; x < pixels; x++) {
> + u8 r = (*src & 0x00ff0000) >> 16;
> + u8 g = (*src & 0x0000ff00) >> 8;
> + u8 b = *src & 0x000000ff;
> +
> + /* ITU BT.601: Y = 0.299 R + 0.587 G + 0.114 B */
> + *dst++ = (3 * r + 6 * g + b) / 10;
> + src++;
> + }
> +}
> +
> /**
> * drm_fb_xrgb8888_to_gray8 - Convert XRGB8888 to grayscale
> * @dst: 8-bit grayscale destination buffer
> @@ -484,8 +499,9 @@ EXPORT_SYMBOL(drm_fb_xrgb8888_to_xrgb2101010_toio);
> void drm_fb_xrgb8888_to_gray8(void *dst, unsigned int dst_pitch, const void *vaddr,
> const struct drm_framebuffer *fb, const struct drm_rect *clip)
> {
> - unsigned int len = (clip->x2 - clip->x1) * sizeof(u32);
> - unsigned int x, y;
> + unsigned int linepixels = clip->x2 - clip->x1;
> + unsigned int len = linepixels * sizeof(u32);
> + unsigned int y;
> void *buf;
> u8 *dst8;
> u32 *src32;
> @@ -508,16 +524,7 @@ void drm_fb_xrgb8888_to_gray8(void *dst, unsigned int dst_pitch, const void *vad
> for (y = clip->y1; y < clip->y2; y++) {
> dst8 = dst;
> src32 = memcpy(buf, vaddr, len);
> - for (x = clip->x1; x < clip->x2; x++) {
> - u8 r = (*src32 & 0x00ff0000) >> 16;
> - u8 g = (*src32 & 0x0000ff00) >> 8;
> - u8 b = *src32 & 0x000000ff;
> -
> - /* ITU BT.601: Y = 0.299 R + 0.587 G + 0.114 B */
> - *dst8++ = (3 * r + 6 * g + b) / 10;
> - src32++;
> - }
> -
> + drm_fb_xrgb8888_to_gray8_line(dst8, src32, linepixels);
> vaddr += fb->pitches[0];
> dst += dst_pitch;
> }
> --
> 2.34.1
>
--
With Best Regards,
Andy Shevchenko
next prev parent reply other threads:[~2022-02-11 15:59 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-02-11 14:33 [PATCH v5 0/6] drm: Add driver for Solomon SSD130x OLED displays Javier Martinez Canillas
2022-02-11 14:33 ` [PATCH v5 1/6] drm/format-helper: Add drm_fb_xrgb8888_to_gray8_line() Javier Martinez Canillas
2022-02-11 15:58 ` Andy Shevchenko [this message]
2022-02-11 14:33 ` [PATCH v5 2/6] drm/format-helper: Add drm_fb_xrgb8888_to_mono_reversed() Javier Martinez Canillas
2022-02-11 16:04 ` Andy Shevchenko
2022-02-12 15:54 ` Geert Uytterhoeven
2022-02-14 8:57 ` Javier Martinez Canillas
2022-02-11 14:33 ` [PATCH v5 3/6] drm: Add driver for Solomon SSD130x OLED displays Javier Martinez Canillas
2022-02-11 16:13 ` Andy Shevchenko
2022-02-11 19:19 ` Javier Martinez Canillas
2022-02-12 11:59 ` Javier Martinez Canillas
2022-02-11 14:33 ` [PATCH v5 4/6] drm/solomon: Add SSD130x OLED displays I2C support Javier Martinez Canillas
2022-02-11 14:35 ` [PATCH v5 5/6] MAINTAINERS: Add entry for Solomon SSD130x OLED displays DRM driver Javier Martinez Canillas
2022-02-11 14:36 ` [PATCH v5 6/6] dt-bindings: display: ssd1307fb: Add myself as binding co-maintainer Javier Martinez Canillas
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=YgaHtHZws8GOUPAk@smile.fi.intel.com \
--to=andriy.shevchenko@linux.intel.com \
--cc=airlied@linux.ie \
--cc=daniel.vetter@ffwll.ch \
--cc=daniel@ffwll.ch \
--cc=dri-devel@lists.freedesktop.org \
--cc=geert@linux-m68k.org \
--cc=javierm@redhat.com \
--cc=linux-fbdev@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=maarten.lankhorst@linux.intel.com \
--cc=maxime@cerno.tech \
--cc=mripard@kernel.org \
--cc=noralf@tronnes.org \
--cc=sam@ravnborg.org \
--cc=tzimmermann@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox