From: Rob Herring <robh@kernel.org>
To: Alexandre Bailon <abailon@baylibre.com>
Cc: ohad@wizery.com, bjorn.andersson@linaro.org,
mathieu.poirier@linaro.org, robh+dt@kernel.or,
matthias.bgg@gmail.com, linux-remoteproc@vger.kernel.org,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-mediatek@lists.infradead.org, linux-kernel@vger.kernel.org,
stephane.leprovost@mediatek.com, khilman@baylibre.com
Subject: Re: [PATCH v4 1/7] dt bindings: remoteproc: Add bindings for the MT8183 APU
Date: Mon, 7 Mar 2022 17:13:10 -0600 [thread overview]
Message-ID: <YiaRhu+tSg7+ZH16@robh.at.kernel.org> (raw)
In-Reply-To: <20220304161514.994128-2-abailon@baylibre.com>
On Fri, Mar 04, 2022 at 05:15:08PM +0100, Alexandre Bailon wrote:
> This adds dt bindings for the APU present in the MT8183.
>
> Signed-off-by: Alexandre Bailon <abailon@baylibre.com>
> ---
> .../bindings/remoteproc/mtk,apu.yaml | 122 ++++++++++++++++++
> 1 file changed, 122 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/remoteproc/mtk,apu.yaml
>
> diff --git a/Documentation/devicetree/bindings/remoteproc/mtk,apu.yaml b/Documentation/devicetree/bindings/remoteproc/mtk,apu.yaml
> new file mode 100644
> index 000000000000..b640aa96d678
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/remoteproc/mtk,apu.yaml
> @@ -0,0 +1,122 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +
> +---
> +$id: "http://devicetree.org/schemas/remoteproc/mtk,apu.yaml#"
> +$schema: "http://devicetree.org/meta-schemas/core.yaml#"
> +
> +title: Mediatek AI Processor Unit (APU)
> +
> +description:
> + This document defines the binding for the APU, a co-processor that could
> + offload the CPU for machine learning and neural network.
> +
> +maintainers:
> + - Alexandre Bailon <abailon@bayLibre.com>
> +
> +properties:
> + compatible:
> + const: mediatek,mt8183-apu
> +
> + reg:
> + maxItems: 1
> +
> + interrupts:
> + maxItems: 1
> +
> + clocks:
> + minItems: 3
> + maxItems: 3
> +
> + clock-names:
> + items:
> + - const: axi
> + - const: ipu
> + - const: jtag
> +
> + iommus:
> + maxItems: 3
> +
> + memory-region:
> + maxItems: 3
> +
> + memory-region-da:
> + description:
> + Array of APU device address. This is used to map the APU device address
> + to a physical address.
> + maxItems: 3
'dma-ranges' should work for this.
> +
> + power-domains:
> + maxItems: 1
> +
> + pinctrl:
> + description: pinctrl handles, required to configure pins for JTAG.
> +
> + pinctrl-names:
> + items:
> + - const: jtag
> +
> +required:
> + - compatible
> + - reg
> + - interrupts
> + - clocks
> + - clock-names
> + - iommus
> + - memory-region
> + - memory-region-da
> + - power-domains
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/clock/mt8183-clk.h>
> + #include <dt-bindings/interrupt-controller/arm-gic.h>
> + #include <dt-bindings/memory/mt8183-larb-port.h>
> + #include <dt-bindings/power/mt8183-power.h>
> +
> + reserved-memory {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges;
> +
> + vdev0buffer: vdev0buffer@52900000 {
> + compatible = "shared-dma-pool";
> + reg = <0x52900000 0x4000>;
> + no-map;
> + };
> +
> + vdev0vring0: vdev0vring0@52904000 {
> + compatible = "shared-dma-pool";
> + reg = <0x52904000 0x2000>;
> + no-map;
> + };
> +
> + vdev0vring1: vdev0vring1@52906000 {
> + compatible = "shared-dma-pool";
> + reg = <0x52906000 0x2000>;
> + no-map;
> + };
> + };
> +
> + apu0: apu@19100000 {
> + compatible = "mediatek,mt8183-apu";
> + reg = <0x19180000 0x14000>;
> + interrupts = <GIC_SPI 292 IRQ_TYPE_LEVEL_LOW>;
> +
> + iommus = <&iommu M4U_PORT_IMG_IPUO>,
> + <&iommu M4U_PORT_IMG_IPU3O>,
> + <&iommu M4U_PORT_IMG_IPUI>;
> +
> + clocks = <&ipu_core0 CLK_IPU_CORE0_AXI>,
> + <&ipu_core0 CLK_IPU_CORE0_IPU>,
> + <&ipu_core0 CLK_IPU_CORE0_JTAG>;
> +
> + clock-names = "axi", "ipu", "jtag";
> +
> + power-domains = <&scpsys MT8183_POWER_DOMAIN_VPU_CORE0>;
> + memory-region = <&vdev0buffer>, <&vdev0vring0>, <&vdev0vring1>;
> + memory-region-da = <0x6fff8000>, <0x6fffc000>, <0x6fffe000>;
> + };
> +...
> --
> 2.34.1
>
>
next prev parent reply other threads:[~2022-03-07 23:13 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-03-04 16:15 [PATCH v4 0/7] Add support of mt8183 APU Alexandre Bailon
2022-03-04 16:15 ` [PATCH v4 1/7] dt bindings: remoteproc: Add bindings for the MT8183 APU Alexandre Bailon
2022-03-07 23:13 ` Rob Herring [this message]
2022-03-04 16:15 ` [PATCH v4 2/7] dt-bindings: remoteproc: Add bindings for the MT8365 APU Alexandre Bailon
2022-03-07 23:15 ` Rob Herring
2022-03-04 16:15 ` [PATCH v4 3/7] remoteproc: Add a remoteproc driver for the MT8183's APU Alexandre Bailon
2022-03-14 22:02 ` Bjorn Andersson
2022-03-04 16:15 ` [PATCH v4 4/7] remoteproc: mtk_apu: Add support of JTAG Alexandre Bailon
2022-03-14 22:24 ` Bjorn Andersson
2022-03-04 16:15 ` [PATCH v4 5/7] remoteproc: mtk_apu: Use match_data Alexandre Bailon
2022-03-14 22:27 ` Bjorn Andersson
2022-03-04 16:15 ` [PATCH v4 6/7] remoteproc: mtk-apu: Add support of MT8365 Alexandre Bailon
2022-03-14 22:28 ` Bjorn Andersson
2022-03-04 16:15 ` [PATCH v4 7/7] ARM64: mt8183: Add support of APU to mt8183 Alexandre Bailon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=YiaRhu+tSg7+ZH16@robh.at.kernel.org \
--to=robh@kernel.org \
--cc=abailon@baylibre.com \
--cc=bjorn.andersson@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=khilman@baylibre.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=linux-remoteproc@vger.kernel.org \
--cc=mathieu.poirier@linaro.org \
--cc=matthias.bgg@gmail.com \
--cc=ohad@wizery.com \
--cc=robh+dt@kernel.or \
--cc=stephane.leprovost@mediatek.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox