public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Greg KH <gregkh@linuxfoundation.org>
To: wujunwen <wudaemon@163.com>
Cc: arnd@arndb.de, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2] char: misc:use DEFINE_PROC_SHOW_ATTRIBUTE micro to simplify misc proc_fops
Date: Mon, 28 Mar 2022 07:51:20 +0200	[thread overview]
Message-ID: <YkFM2Ko21j8Ehca8@kroah.com> (raw)
In-Reply-To: <20220327143254.226844-1-wudaemon@163.com>

On Sun, Mar 27, 2022 at 02:32:54PM +0000, wujunwen wrote:
> DEFINE_PROC_SHOW_ATTRIBUTE is used to simply seq_file flow ,so
> we can use it to simplify misc proc_fops.
> 
> Signed-off-by: wujunwen <wudaemon@163.com>
> ---
>  drivers/char/misc.c | 41 ++++++++++++++---------------------------
>  1 file changed, 14 insertions(+), 27 deletions(-)
> 
> diff --git a/drivers/char/misc.c b/drivers/char/misc.c
> index ca5141ed5ef3..076b7f08aa7a 100644
> --- a/drivers/char/misc.c
> +++ b/drivers/char/misc.c
> @@ -64,40 +64,23 @@ static DEFINE_MUTEX(misc_mtx);
>  static DECLARE_BITMAP(misc_minors, DYNAMIC_MINORS);
>  
>  #ifdef CONFIG_PROC_FS
> -static void *misc_seq_start(struct seq_file *seq, loff_t *pos)
> -{
> -	mutex_lock(&misc_mtx);
> -	return seq_list_start(&misc_list, *pos);
> -}
>  
> -static void *misc_seq_next(struct seq_file *seq, void *v, loff_t *pos)
> +static int misc_show(struct seq_file *seq, void *v)
>  {
> -	return seq_list_next(v, &misc_list, pos);
> -}
> +	const struct miscdevice *p;
>  
> -static void misc_seq_stop(struct seq_file *seq, void *v)
> -{
> +	mutex_lock(&misc_mtx);
> +	list_for_each_entry(p, &misc_list, list) {
> +		seq_printf(seq, "%3i %s\n", p->minor, p->name ? p->name : "");
> +	}
>  	mutex_unlock(&misc_mtx);
> -}
> -
> -static int misc_seq_show(struct seq_file *seq, void *v)
> -{
> -	const struct miscdevice *p = list_entry(v, struct miscdevice, list);
> -
> -	seq_printf(seq, "%3i %s\n", p->minor, p->name ? p->name : "");
>  	return 0;
>  }
>  
> -
> -static const struct seq_operations misc_seq_ops = {
> -	.start = misc_seq_start,
> -	.next  = misc_seq_next,
> -	.stop  = misc_seq_stop,
> -	.show  = misc_seq_show,
> -};
> +DEFINE_PROC_SHOW_ATTRIBUTE(misc);
>  #endif
>  
> -static int misc_open(struct inode *inode, struct file *file)
> +static int misc_fops_open(struct inode *inode, struct file *file)
>  {
>  	int minor = iminor(inode);
>  	struct miscdevice *c;
> @@ -148,7 +131,7 @@ static struct class *misc_class;
>  
>  static const struct file_operations misc_fops = {
>  	.owner		= THIS_MODULE,
> -	.open		= misc_open,
> +	.open		= misc_fops_open,
>  	.llseek		= noop_llseek,
>  };
>  
> @@ -266,9 +249,11 @@ static char *misc_devnode(struct device *dev, umode_t *mode)
>  static int __init misc_init(void)
>  {
>  	int err;
> +#ifdef CONFIG_PROC_FS
>  	struct proc_dir_entry *ret;
>  
> -	ret = proc_create_seq("misc", 0, NULL, &misc_seq_ops);
> +	ret = proc_create("misc", 0, NULL, &misc_proc_ops);
> +#endif
>  	misc_class = class_create(THIS_MODULE, "misc");
>  	err = PTR_ERR(misc_class);
>  	if (IS_ERR(misc_class))
> @@ -284,8 +269,10 @@ static int __init misc_init(void)
>  	pr_err("unable to get major %d for misc devices\n", MISC_MAJOR);
>  	class_destroy(misc_class);
>  fail_remove:
> +#ifdef CONFIG_PROC_FS
>  	if (ret)
>  		remove_proc_entry("misc", NULL);
> +#endif
>  	return err;
>  }
>  subsys_initcall(misc_init);
> -- 
> 2.25.1
> 

Hi,

This is the friendly patch-bot of Greg Kroah-Hartman.  You have sent him
a patch that has triggered this response.  He used to manually respond
to these common problems, but in order to save his sanity (he kept
writing the same thing over and over, yet to different people), I was
created.  Hopefully you will not take offence and will fix the problem
in your patch and resubmit it so that it can be accepted into the Linux
kernel tree.

You are receiving this message because of the following common error(s)
as indicated below:

- This looks like a new version of a previously submitted patch, but you
  did not list below the --- line any changes from the previous version.
  Please read the section entitled "The canonical patch format" in the
  kernel file, Documentation/SubmittingPatches for what needs to be done
  here to properly describe this.

If you wish to discuss this problem further, or you have questions about
how to resolve this issue, please feel free to respond to this email and
Greg will reply once he has dug out from the pending patches received
from other developers.

thanks,

greg k-h's patch email bot

  reply	other threads:[~2022-03-28  5:51 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-03-27 14:32 [PATCH v2] char: misc:use DEFINE_PROC_SHOW_ATTRIBUTE micro to simplify misc proc_fops wujunwen
2022-03-28  5:51 ` Greg KH [this message]
     [not found]   ` <4ac4969e.8288.17fdb6206ea.Coremail.wudaemon@163.com>
2022-03-30 15:37     ` Greg KH
     [not found]       ` <51686fcb.83c6.17fdb7fd327.Coremail.wudaemon@163.com>
2022-03-30 16:31         ` Greg KH
  -- strict thread matches above, loose matches on Subject: below --
2022-03-31 15:15 wujunwen
2022-04-24 15:35 ` Greg KH

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=YkFM2Ko21j8Ehca8@kroah.com \
    --to=gregkh@linuxfoundation.org \
    --cc=arnd@arndb.de \
    --cc=linux-kernel@vger.kernel.org \
    --cc=wudaemon@163.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox