Re: [PATCH 16/21] dt-bindings: ata: ahci: Add DWC AHCI SATA controller DT schema

[Rob Herring <robh@kernel.org>]

On Thu, Mar 24, 2022 at 03:16:23AM +0300, Serge Semin wrote:
> Synopsys AHCI SATA controller is mainly compatible with the generic AHCI
> SATA controller except a few peculiarities and the platform environment
> requirements. In particular it can have one or two reference clocks to
> feed up its AXI/AHB interface and SATA PHYs domain and at least one reset
> control for the application clock domain. In addition to that the DMA
> interface of each port can be tuned up to work with the predefined maximum
> data chunk size. Note unlike generic AHCI controller DWC AHCI can't have
> more than 8 ports. All of that is reflected in the new DWC AHCI SATA
> device DT binding.
> 
> Note the DWC AHCI SATA controller DT-schema has been created in a way so
> to be reused for the vendor-specific DT-schemas. One of which we are about
> to introduce.
> 
> Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
> ---
>  .../bindings/ata/snps,dwc-ahci.yaml           | 121 ++++++++++++++++++
>  1 file changed, 121 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/ata/snps,dwc-ahci.yaml
> 
> diff --git a/Documentation/devicetree/bindings/ata/snps,dwc-ahci.yaml b/Documentation/devicetree/bindings/ata/snps,dwc-ahci.yaml
> new file mode 100644
> index 000000000000..b443154b63aa
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/ata/snps,dwc-ahci.yaml
> @@ -0,0 +1,121 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/ata/snps,dwc-ahci.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Synopsys DWC AHCI SATA controller
> +
> +maintainers:
> +  - Serge Semin <fancer.lancer@gmail.com>
> +
> +description: |
> +  This document defines device tree bindings for the Synopsys DWC
> +  implementation of the AHCI SATA controller.
> +
> +allOf:
> +  - $ref: ahci-common.yaml#
> +
> +properties:
> +  compatible:
> +    oneOf:
> +      - description: Synopsys AHCI SATA-compatible devices
> +        contains:
> +          const: snps,dwc-ahci
> +      - description: SPEAr1340 AHCI SATA device
> +        const: snps,spear-ahci
> +
> +  reg:
> +    maxItems: 1
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  clocks:
> +    description:
> +      Basic DWC AHCI SATA clock sources like application AXI/AHB BIU clock
> +      and embedded PHYs reference clock together with vendor-specific set
> +      of clocks.
> +    minItems: 1
> +    maxItems: 4
> +
> +  clock-names:
> +    contains:
> +      anyOf:
> +        - description: Application AXI/AHB BIU clock source
> +          enum:
> +            - aclk
> +            - sata
> +        - description: SATA Ports reference clock
> +          enum:
> +            - ref
> +            - sata_ref
> +
> +  resets:
> +    description:
> +      At least basic core and application clock domains reset is normally
> +      supported by the DWC AHCI SATA controller. Some platform specific
> +      clocks can be also specified though.
> +
> +  reset-names:
> +    contains:
> +      description: Core and application clock domains reset control
> +      const: arst
> +
> +patternProperties:
> +  "^sata-port@[0-9a-e]$":
> +    type: object
> +
> +    properties:
> +      reg:
> +        minimum: 0
> +        maximum: 7
> +
> +      snps,tx-ts-max:
> +        $ref: /schemas/types.yaml#/definitions/uint32
> +        description: Maximal size of Tx DMA transactions in FIFO words
> +        minimum: 1
> +        maximum: 1024
> +
> +      snps,rx-ts-max:
> +        $ref: /schemas/types.yaml#/definitions/uint32
> +        description: Maximal size of Rx DMA transactions in FIFO words
> +        minimum: 1
> +        maximum: 1024

Are you reading these somewhere? 

Only powers of 2 are valid. (Guess what Calxeda's controller uses.)

Rob