public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Bjorn Andersson <bjorn.andersson@linaro.org>
To: Vinod Koul <vkoul@kernel.org>
Cc: linux-arm-msm@vger.kernel.org, dmaengine@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH 3/3] dmaengine: qcom: gpi: Add support for ee_offset
Date: Tue, 12 Apr 2022 14:31:17 -0700	[thread overview]
Message-ID: <YlXvpdmBRVaCVBRo@ripper> (raw)
In-Reply-To: <20220406132508.1029348-3-vkoul@kernel.org>

On Wed 06 Apr 06:25 PDT 2022, Vinod Koul wrote:

> Controller on newer SoCs like SM8450 have registers at at offset. Add
> ee_offset to driver_data and add this compatible for the driver.
> 
> Signed-off-by: Vinod Koul <vkoul@kernel.org>

Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Regards,
Bjorn

> ---
>  drivers/dma/qcom/gpi.c | 11 ++++++++---
>  1 file changed, 8 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/dma/qcom/gpi.c b/drivers/dma/qcom/gpi.c
> index 3429ceccd13b..0b402d923eae 100644
> --- a/drivers/dma/qcom/gpi.c
> +++ b/drivers/dma/qcom/gpi.c
> @@ -2152,6 +2152,7 @@ static int gpi_probe(struct platform_device *pdev)
>  {
>  	struct gpi_dev *gpi_dev;
>  	unsigned int i;
> +	u32 ee_offset;
>  	int ret;
>  
>  	gpi_dev = devm_kzalloc(&pdev->dev, sizeof(*gpi_dev), GFP_KERNEL);
> @@ -2179,6 +2180,9 @@ static int gpi_probe(struct platform_device *pdev)
>  		return ret;
>  	}
>  
> +	ee_offset = (uintptr_t)device_get_match_data(gpi_dev->dev);
> +	gpi_dev->ee_base = gpi_dev->ee_base - ee_offset;
> +
>  	gpi_dev->ev_factor = EV_FACTOR;
>  
>  	ret = dma_set_mask(gpi_dev->dev, DMA_BIT_MASK(64));
> @@ -2282,9 +2286,10 @@ static int gpi_probe(struct platform_device *pdev)
>  }
>  
>  static const struct of_device_id gpi_of_match[] = {
> -	{ .compatible = "qcom,sdm845-gpi-dma" },
> -	{ .compatible = "qcom,sm8150-gpi-dma" },
> -	{ .compatible = "qcom,sm8250-gpi-dma" },
> +	{ .compatible = "qcom,sdm845-gpi-dma", .data = (void *)0x0 },
> +	{ .compatible = "qcom,sm8150-gpi-dma", .data = (void *)0x0 },
> +	{ .compatible = "qcom,sm8250-gpi-dma", .data = (void *)0x0 },
> +	{ .compatible = "qcom,sm8450-gpi-dma", .data = (void *)0x10000 },
>  	{ },
>  };
>  MODULE_DEVICE_TABLE(of, gpi_of_match);
> -- 
> 2.34.1
> 

  reply	other threads:[~2022-04-12 23:24 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-04-06 13:25 [PATCH 1/3] dmaengine: qcom: gpi: set chain and link flag for duplex Vinod Koul
2022-04-06 13:25 ` [PATCH 2/3] dt-bindings: dmaengine: qcom: gpi: add compatible for sm8350/sm8350 Vinod Koul
2022-04-07  7:32   ` Krzysztof Kozlowski
2022-04-12 21:30   ` Bjorn Andersson
2022-04-06 13:25 ` [PATCH 3/3] dmaengine: qcom: gpi: Add support for ee_offset Vinod Koul
2022-04-12 21:31   ` Bjorn Andersson [this message]
2022-04-12 21:30 ` [PATCH 1/3] dmaengine: qcom: gpi: set chain and link flag for duplex Bjorn Andersson
2022-04-13 12:24 ` Vinod Koul

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=YlXvpdmBRVaCVBRo@ripper \
    --to=bjorn.andersson@linaro.org \
    --cc=dmaengine@vger.kernel.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=vkoul@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox