Re: [PATCH v7 1/4] arm64: dts: qcom: sc7280: Add nodes for soundwire and va tx rx digital macro codecs

[Matthias Kaehlcke <mka@chromium.org>]

On Wed, Apr 13, 2022 at 08:51:14PM +0530, Srinivasa Rao Mandadapu wrote:
> SC7280 has VA, TX and RX macros with SoundWire Controllers to attach with
> external codecs using soundwire masters. Add these nodes for sc7280 based
> platforms audio use case.
> 
> Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
> Co-developed-by: Venkata Prasad Potturu <quic_potturu@quicinc.com>
> Signed-off-by: Venkata Prasad Potturu <quic_potturu@quicinc.com>
> ---
>  arch/arm64/boot/dts/qcom/sc7280.dtsi | 122 +++++++++++++++++++++++++++++++++++
>  1 file changed, 122 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
> index 50fea0e..c0f127f 100644
> --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
> @@ -1980,6 +1980,128 @@
>  			#clock-cells = <1>;
>  		};
>  
> +		lpass_rx_macro: codec@3200000 {
> +			compatible = "qcom,sc7280-lpass-rx-macro";
> +			reg = <0 0x03200000 0 0x1000>;
> +
> +			status = "disabled";

nit: this is easily missed here inmidst of the other stuff, best place
it at the end of the node as many other nodes do.

> +			pinctrl-names = "default";
> +			pinctrl-0 = <&lpass_rx_swr>;
> +
> +			clocks = <&lpass_aon LPASS_AON_CC_TX_MCLK_CLK>,
> +				 <&lpass_aon LPASS_AON_CC_TX_MCLK_2X_CLK>,
> +				 <&lpass_va_macro>;
> +			clock-names = "mclk", "npl", "fsgen";
> +
> +			power-domains = <&lpass_hm LPASS_CORE_CC_LPASS_CORE_HM_GDSC>,
> +					<&lpass_aon LPASS_AON_CC_LPASS_AUDIO_HM_GDSC>;
> +			power-domain-names ="macro", "dcodec";

add space after '='.

> +
> +			#clock-cells = <0>;
> +			#sound-dai-cells = <1>;
> +		};
> +
> +		swr0: soundwire@3210000 {
> +			compatible = "qcom,soundwire-v1.6.0";
> +			reg = <0 0x03210000 0 0x2000>;
> +
> +			interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&lpass_rx_macro>;
> +			clock-names = "iface";
> +
> +			qcom,din-ports = <0>;
> +			qcom,dout-ports = <5>;
> +
> +			resets = <&lpass_audiocc LPASS_AUDIO_SWR_RX_CGCR>;
> +			reset-names = "swr_audio_cgcr";

The resets aren't mentioned in the binding, should they be added?

> +
> +			qcom,ports-word-length =	/bits/ 8 <0x01 0x07 0x04 0xff 0xff>;
> +			qcom,ports-sinterval-low =	/bits/ 8 <0x03 0x3f 0x1f 0x03 0x03>;
> +			qcom,ports-offset1 =		/bits/ 8 <0x00 0x00 0x0b 0x01 0x01>;
> +			qcom,ports-offset2 =		/bits/ 8 <0x00 0x00 0x0b 0x00 0x00>;
> +			qcom,ports-lane-control =	/bits/ 8 <0x01 0x00 0x00 0x00 0x00>;
> +			qcom,ports-block-pack-mode =	/bits/ 8 <0xff 0x00 0x01 0xff 0xff>;
> +			qcom,ports-hstart =		/bits/ 8 <0xff 0x03 0xff 0xff 0xff>;
> +			qcom,ports-hstop =		/bits/ 8 <0xff 0x06 0xff 0xff 0xff>;
> +			qcom,ports-block-group-count =	/bits/ 8 <0xff 0xff 0xff 0xff 0x00>;
> +
> +			#sound-dai-cells = <1>;
> +			#address-cells = <2>;
> +			#size-cells = <0>;

in difference to the other nodes the soundwire ones don't have
'status = "disabled"', should they be disabled by default?

> +		};
> +
> +		lpass_tx_macro: codec@3220000 {
> +			compatible = "qcom,sc7280-lpass-tx-macro";
> +			reg = <0 0x03220000 0 0x1000>;
> +
> +			status = "disabled";
> +			pinctrl-names = "default";
> +			pinctrl-0 = <&lpass_tx_swr>;
> +
> +			clocks = <&lpass_aon LPASS_AON_CC_TX_MCLK_CLK>,
> +				 <&lpass_aon LPASS_AON_CC_TX_MCLK_2X_CLK>,
> +				 <&lpass_va_macro>;
> +			clock-names = "mclk", "npl", "fsgen";
> +
> +			power-domains = <&lpass_hm LPASS_CORE_CC_LPASS_CORE_HM_GDSC>,
> +					<&lpass_aon LPASS_AON_CC_LPASS_AUDIO_HM_GDSC>;
> +			power-domain-names ="macro", "dcodec";

add space after '='

> +
> +			#clock-cells = <0>;
> +			#sound-dai-cells = <1>;
> +		};
> +
> +		swr1: soundwire@3230000 {
> +			compatible = "qcom,soundwire-v1.6.0";
> +			reg = <0 0x03230000 0 0x2000>;
> +
> +			interrupts-extended = <&intc GIC_SPI 496 IRQ_TYPE_LEVEL_HIGH>,
> +					      <&pdc 130 IRQ_TYPE_LEVEL_HIGH>;
> +			interrupt-names = "swr_master_irq", "swr_wake_irq";

From the binding

  - interrupt-names:
        Usage: Optional
        Value type: boolean
        Value type: <stringlist>
        Definition: should be "core" for core and "wakeup" for wake interrupt.

Does the binding need an update?

> +			clocks = <&lpass_tx_macro>;
> +			clock-names = "iface";
> +
> +			qcom,din-ports = <3>;
> +			qcom,dout-ports = <0>;
> +
> +			resets = <&lpass_audiocc LPASS_AUDIO_SWR_TX_CGCR>;
> +			reset-names = "swr_audio_cgcr";
> +
> +			qcom,ports-sinterval-low =	/bits/ 8 <0x01 0x03 0x03>;
> +			qcom,ports-offset1 =		/bits/ 8 <0x01 0x00 0x02>;
> +			qcom,ports-offset2 =		/bits/ 8 <0x00 0x00 0x00>;
> +			qcom,ports-hstart =		/bits/ 8 <0xff 0xff 0xff>;
> +			qcom,ports-hstop =		/bits/ 8 <0xff 0xff 0xff>;
> +			qcom,ports-word-length =	/bits/ 8 <0xff 0x00 0xff>;
> +			qcom,ports-block-pack-mode =	/bits/ 8 <0xff 0xff 0xff>;
> +			qcom,ports-block-group-count =	/bits/ 8 <0xff 0xff 0xff>;
> +			qcom,ports-lane-control =	/bits/ 8 <0x00 0x01 0x00>;
> +			qcom,port-offset = <1>;
> +
> +			#sound-dai-cells = <1>;
> +			#address-cells = <2>;
> +			#size-cells = <0>;
> +		};
> +
> +		lpass_va_macro: codec@3370000 {
> +			compatible = "qcom,sc7280-lpass-va-macro";
> +			reg = <0 0x03370000 0 0x1000>;
> +
> +			status = "disabled";
> +			pinctrl-0 = <&lpass_dmic01>;
> +			pinctrl-names = "default";
> +
> +			clocks = <&lpass_aon LPASS_AON_CC_TX_MCLK_CLK>;
> +			clock-names = "mclk";
> +
> +			power-domains = <&lpass_hm LPASS_CORE_CC_LPASS_CORE_HM_GDSC>,
> +					<&lpass_aon LPASS_AON_CC_LPASS_AUDIO_HM_GDSC>;
> +			power-domain-names ="macro", "dcodec";

add space after '='.

> +
> +			#clock-cells = <0>;
> +			#sound-dai-cells = <1>;
> +		};
> +
>  		lpass_ag_noc: interconnect@3c40000 {
>  			reg = <0 0x03c40000 0 0xf080>;
>  			compatible = "qcom,sc7280-lpass-ag-noc";
> -- 
> 2.7.4
>