From: Daniel Vetter <daniel@ffwll.ch>
To: Javier Martinez Canillas <javierm@redhat.com>
Cc: linux-kernel@vger.kernel.org,
Daniel Vetter <daniel.vetter@ffwll.ch>,
Thomas Zimmermann <tzimmermann@suse.de>,
Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
dri-devel@lists.freedesktop.org
Subject: Re: [PATCH v3 3/3] drm: Allow simpledrm to setup its emulated FB as firmware provided
Date: Wed, 4 May 2022 12:58:49 +0200 [thread overview]
Message-ID: <YnJcaaDcIsJKhSwQ@phenom.ffwll.local> (raw)
In-Reply-To: <20220503071540.471667-4-javierm@redhat.com>
On Tue, May 03, 2022 at 09:15:40AM +0200, Javier Martinez Canillas wrote:
> Indicate to fbdev subsystem that the registered framebuffer is provided by
> the system firmware, so that it can handle accordingly. For example, would
> unregister the FB devices if asked to remove the conflicting framebuffers.
>
> Add a new DRM_FB_FW field to drm_fbdev_generic_setup() options parameter.
> Drivers can use this to indicate the FB helper initialization that the FB
> registered is provided by the firmware, so it can be configured as such.
>
> Suggested-by: Thomas Zimmermann <tzimmermann@suse.de>
> Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
> Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> ---
>
> Changes in v3:
> - Drop the firmware local variable (Laurent Pinchart).
> - Use DRM_FB_OPTION() since DRM_FB_SET_OPTION() got renamed (kernel test robot).
Just for the record what I brought up on irc already:
FBINFO_MISC_FIRMWARE is purely an internal flag with no uapi impact, and
it's only to control whether we nuke this from
remove_conflicting_framebuffer or not. Since simpledrm only ever binds
against sysfb I think it'd be cleaner to only rely on that, and relegate
that entire FBINFO_MISC_FIRMWARE misc hack to the fbdev dungeons and let
it quietly wither away there.
Also I'm not a huge fan of these midlayer flags in general :-)
-Daniel
>
> drivers/gpu/drm/drm_fb_helper.c | 8 ++++++++
> drivers/gpu/drm/tiny/simpledrm.c | 2 +-
> include/drm/drm_fb_helper.h | 10 ++++++++++
> 3 files changed, 19 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/gpu/drm/drm_fb_helper.c b/drivers/gpu/drm/drm_fb_helper.c
> index 52042ba1e4cf..28b21858b726 100644
> --- a/drivers/gpu/drm/drm_fb_helper.c
> +++ b/drivers/gpu/drm/drm_fb_helper.c
> @@ -1891,6 +1891,10 @@ __drm_fb_helper_initial_config_and_unlock(struct drm_fb_helper *fb_helper,
> /* don't leak any physical addresses to userspace */
> info->flags |= FBINFO_HIDE_SMEM_START;
>
> + /* Indicate that the framebuffer is provided by the firmware */
> + if (fb_helper->firmware)
> + info->flags |= FBINFO_MISC_FIRMWARE;
> +
> /* Need to drop locks to avoid recursive deadlock in
> * register_framebuffer. This is ok because the only thing left to do is
> * register the fbdev emulation instance in kernel_fb_helper_list. */
> @@ -2512,6 +2516,8 @@ static const struct drm_client_funcs drm_fbdev_client_funcs = {
> *
> * * DRM_FB_BPP: bits per pixel for the device. If the field is not set,
> * @dev->mode_config.preferred_depth is used instead.
> + * * DRM_FB_FW: if the framebuffer for the device is provided by the
> + * system firmware.
> *
> * This function sets up generic fbdev emulation for drivers that supports
> * dumb buffers with a virtual address and that can be mmap'ed.
> @@ -2569,6 +2575,8 @@ void drm_fbdev_generic_setup(struct drm_device *dev, const unsigned int options)
> if (!fb_helper->preferred_bpp)
> fb_helper->preferred_bpp = 32;
>
> + fb_helper->firmware = DRM_FB_GET_OPTION(DRM_FB_FW, options);
> +
> ret = drm_fbdev_client_hotplug(&fb_helper->client);
> if (ret)
> drm_dbg_kms(dev, "client hotplug ret=%d\n", ret);
> diff --git a/drivers/gpu/drm/tiny/simpledrm.c b/drivers/gpu/drm/tiny/simpledrm.c
> index f5b8e864a5cd..f6f1c5e108b2 100644
> --- a/drivers/gpu/drm/tiny/simpledrm.c
> +++ b/drivers/gpu/drm/tiny/simpledrm.c
> @@ -901,7 +901,7 @@ static int simpledrm_probe(struct platform_device *pdev)
> if (ret)
> return ret;
>
> - drm_fbdev_generic_setup(dev, 0);
> + drm_fbdev_generic_setup(dev, DRM_FB_OPTION(DRM_FB_FW, 1));
>
> return 0;
> }
> diff --git a/include/drm/drm_fb_helper.h b/include/drm/drm_fb_helper.h
> index 5fc41cf0c987..5a17af423944 100644
> --- a/include/drm/drm_fb_helper.h
> +++ b/include/drm/drm_fb_helper.h
> @@ -44,6 +44,7 @@ enum mode_set_atomic {
> };
>
> #define DRM_FB_BPP_MASK GENMASK(7, 0)
> +#define DRM_FB_FW_MASK GENMASK(8, 8)
>
> /* Using the GNU statement expression extension */
> #define DRM_FB_OPTION(option, value) \
> @@ -197,6 +198,15 @@ struct drm_fb_helper {
> * See also: @deferred_setup
> */
> int preferred_bpp;
> +
> + /**
> + * @firmware:
> + *
> + * Set if the driver indicates to the FB helper initialization that the
> + * framebuffer for the device being registered is provided by firmware,
> + * so that it can pass this on when registering the framebuffer device.
> + */
> + bool firmware;
> };
>
> static inline struct drm_fb_helper *
> --
> 2.35.1
>
--
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
next prev parent reply other threads:[~2022-05-04 10:58 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-05-03 7:15 [PATCH v3 0/3] drm: Allow simpledrm to setup its emulated FB as firmware provided Javier Martinez Canillas
2022-05-03 7:15 ` [PATCH v3 1/3] drm: Remove superfluous arg when calling to drm_fbdev_generic_setup() Javier Martinez Canillas
2022-05-03 7:15 ` [PATCH v3 2/3] drm/fb-helper: Rename preferred_bpp drm_fbdev_generic_setup() parameter Javier Martinez Canillas
2022-05-03 17:02 ` Jernej Škrabec
2022-05-03 7:15 ` [PATCH v3 3/3] drm: Allow simpledrm to setup its emulated FB as firmware provided Javier Martinez Canillas
2022-05-04 10:58 ` Daniel Vetter [this message]
2022-05-04 11:32 ` Javier Martinez Canillas
2022-05-05 12:11 ` Daniel Vetter
2022-05-05 12:45 ` Javier Martinez Canillas
2022-05-05 12:58 ` Daniel Vetter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=YnJcaaDcIsJKhSwQ@phenom.ffwll.local \
--to=daniel@ffwll.ch \
--cc=daniel.vetter@ffwll.ch \
--cc=dri-devel@lists.freedesktop.org \
--cc=javierm@redhat.com \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-kernel@vger.kernel.org \
--cc=tzimmermann@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox