Re: [PATCH v2] iommu/amd: Set translation valid bit only when IO page tables are in used

[Joerg Roedel <joro@8bytes.org>]

Hi Suravee,

On Mon, May 16, 2022 at 07:27:51PM +0700, Suravee Suthikulpanit wrote:
> Due to the new restriction (please see the IOMMU spec Rev 3.06-PUB - Apr 2021
> https://www.amd.com/system/files/TechDocs/48882_IOMMU.pdf) where the use of
> DTE[Mode]=0 is not supported on systems that are SNP-enabled (i.e. EFR[SNPSup]=1),
> the IOMMU HW looks at the DTE[TV] bit to determine if it needs to handle the v1 page table.
> When the HW encounters DTE entry with TV=1, V=1, Mode=0, it would generate
> ILLEGAL_DEV_TABLE_ENTRY event.

Ah, that is the part I was missing, thanks.

> - I am still trying to see what is the best way to force Linux to not allow
> Mode=0 (i.e. iommu=pt mode). Any thoughts?

I think this needs a general approach. First start in the AMD IOMMU
driver:

	1) Do not set DTE.TV=1 bit iff SNP-Support is enabled
	2) Fail to allocate passthrough domains when SNP support is
	   enabled.

Then test how the IOMMU core layer handles that. In fact the IOMMU layer
needs to adjust its decisions so that:

	1) It uses translated-mode by default
	2) passthrough domains are disallowed and can not be chosen, not
	   on the kernel command line and not at runtime.

Ideally this needs some kind of arch-callback to set the appropriate
defaults.

> - Also, it seems that the current iommu v2 page table use case, where GVA->GPA=SPA
> will no longer be supported on system w/ SNPSup=1. Any thoughts?

Support for that is not upstream yet, it should be easy to disallow this
configuration and just use the v1 page-tables when SNP is active. This
can be handled entirely inside the AMD IOMMU driver.

Regards,

	Joerg