Re: [Linux v5.19-rc1] tools/perf/a.out remains after make -C tools/perf clean

Sedat Dilek
2022-06-14T22:12:34Z

[-- Attachment #1: Type: text/plain, Size: 2782 bytes --]

On Tue, Jun 14, 2022 at 9:24 PM Arnaldo Carvalho de Melo
<arnaldo.melo@gmail.com> wrote:
>
> Em Tue, Jun 07, 2022 at 08:59:31PM +0200, Sedat Dilek escreveu:
> > Hi,
> >
> > I observed this some time ago - so this is not only Linux v5.19-rc1 related.
> >
> > $ LC_ALL=C make -C tools/perf clean 2>&1 | tee ../make-log_perf-clean.txt
> > make: Entering directory '/home/dileks/src/linux-kernel/git/tools/perf'
> > CLEAN x86
> > CLEAN libtraceevent
> > CLEAN libapi
> > CLEAN libbpf
> > CLEAN libsubcmd
> > CLEAN libperf
> > CLEAN fixdep
> > CLEAN feature-detect
> > CLEAN python
> > CLEAN bpf-skel
> > CLEAN core-objs
> > CLEAN core-progs
> > CLEAN core-gen
> > CLEAN Documentation
> > make: Leaving directory '/home/dileks/src/linux-kernel/git/tools/perf'
> >
> > $ git status -s
> > M tools/perf/util/unwind-libunwind-local.c
> > ?? tools/perf/a.out
> >
> > $ rm -v tools/perf/a.out
> > 'tools/perf/a.out' deleted
> >
> > $ git checkout -- tools/perf/util/unwind-libunwind-local.c
> >
> > $ git status -s
> > [ empty ]
>
> Interesting, since Linus complained at some point that after building
> perf some new temp file was left there I added 'git status' to my
> scripts to always get this flagged.
>
> I'm not seeing this here.
>

Just re-checked with Linux v5.19-rc2 and attaching tools/perf/a.out +
tools/perf/Makefile.config.

Check perf binary:

$ ~/bin/perf -vv
perf version 5.19.0-rc2
dwarf: [ on ] # HAVE_DWARF_SUPPORT
dwarf_getlocations: [ on ] # HAVE_DWARF_GETLOCATIONS_SUPPORT
glibc: [ on ] # HAVE_GLIBC_SUPPORT
syscall_table: [ on ] # HAVE_SYSCALL_TABLE_SUPPORT
libbfd: [ on ] # HAVE_LIBBFD_SUPPORT
debuginfod: [ OFF ] # HAVE_DEBUGINFOD_SUPPORT
libelf: [ on ] # HAVE_LIBELF_SUPPORT
libnuma: [ on ] # HAVE_LIBNUMA_SUPPORT
numa_num_possible_cpus: [ on ] # HAVE_LIBNUMA_SUPPORT
libperl: [ on ] # HAVE_LIBPERL_SUPPORT
libpython: [ on ] # HAVE_LIBPYTHON_SUPPORT
libslang: [ on ] # HAVE_SLANG_SUPPORT
libcrypto: [ on ] # HAVE_LIBCRYPTO_SUPPORT
libunwind: [ on ] # HAVE_LIBUNWIND_SUPPORT
libdw-dwarf-unwind: [ on ] # HAVE_DWARF_SUPPORT
zlib: [ on ] # HAVE_ZLIB_SUPPORT
lzma: [ on ] # HAVE_LZMA_SUPPORT
get_cpuid: [ on ] # HAVE_AUXTRACE_SUPPORT
bpf: [ on ] # HAVE_LIBBPF_SUPPORT
aio: [ on ] # HAVE_AIO_SUPPORT
zstd: [ on ] # HAVE_ZSTD_SUPPORT
libpfm4: [ OFF ] # HAVE_LIBPFM

Tried `make distclean`.
Tried `make tools/ clean` but tools/tracing/rtla produces errors (rm clean).
Still exists: tools/perf/a.out.

-Sedat-

[-- Attachment #2: a.out --]
[-- Type: application/octet-stream, Size: 16048 bytes --]

[-- Attachment #3: Makefile.config --]
[-- Type: application/octet-stream, Size: 41648 bytes --]

# SPDX-License-Identifier: GPL-2.0-only

ifeq ($(src-perf),)
src-perf := $(srctree)/tools/perf
endif

ifeq ($(obj-perf),)
obj-perf := $(OUTPUT)
endif

ifneq ($(obj-perf),)
obj-perf := $(abspath $(obj-perf))/
endif

$(shell printf "" > $(OUTPUT).config-detected)
detected = $(shell echo "$(1)=y" >> $(OUTPUT).config-detected)
detected_var = $(shell echo "$(1)=$($(1))" >> $(OUTPUT).config-detected)

CFLAGS := $(EXTRA_CFLAGS) $(filter-out -Wnested-externs,$(EXTRA_WARNINGS))
HOSTCFLAGS := $(filter-out -Wnested-externs,$(EXTRA_WARNINGS))

include $(srctree)/tools/scripts/Makefile.arch

$(call detected_var,SRCARCH)

NO_PERF_REGS := 1

ifneq ($(NO_SYSCALL_TABLE),1)
NO_SYSCALL_TABLE := 1

ifeq ($(SRCARCH),x86)
ifeq (${IS_64_BIT}, 1)
NO_SYSCALL_TABLE := 0
endif
else
ifeq ($(SRCARCH),$(filter $(SRCARCH),powerpc arm64 s390 mips))
NO_SYSCALL_TABLE := 0
endif
endif

ifneq ($(NO_SYSCALL_TABLE),1)
CFLAGS += -DHAVE_SYSCALL_TABLE_SUPPORT
endif
endif

# Additional ARCH settings for ppc
ifeq ($(SRCARCH),powerpc)
NO_PERF_REGS := 0
CFLAGS += -I$(OUTPUT)arch/powerpc/include/generated
LIBUNWIND_LIBS := -lunwind -lunwind-ppc64
endif

# Additional ARCH settings for x86
ifeq ($(SRCARCH),x86)
$(call detected,CONFIG_X86)
ifeq (${IS_64_BIT}, 1)
CFLAGS += -DHAVE_ARCH_X86_64_SUPPORT -I$(OUTPUT)arch/x86/include/generated
ARCH_INCLUDE = ../../arch/x86/lib/memcpy_64.S ../../arch/x86/lib/memset_64.S
LIBUNWIND_LIBS = -lunwind-x86_64 -lunwind -llzma
$(call detected,CONFIG_X86_64)
else
LIBUNWIND_LIBS = -lunwind-x86 -llzma -lunwind
endif
NO_PERF_REGS := 0
endif

ifeq ($(SRCARCH),arm)
NO_PERF_REGS := 0
LIBUNWIND_LIBS = -lunwind -lunwind-arm
endif

ifeq ($(SRCARCH),arm64)
NO_PERF_REGS := 0
CFLAGS += -I$(OUTPUT)arch/arm64/include/generated
LIBUNWIND_LIBS = -lunwind -lunwind-aarch64
endif

ifeq ($(SRCARCH),riscv)
NO_PERF_REGS := 0
endif

ifeq ($(SRCARCH),csky)
NO_PERF_REGS := 0
endif

ifeq ($(ARCH),s390)
NO_PERF_REGS := 0
CFLAGS += -fPIC -I$(OUTPUT)arch/s390/include/generated
endif

ifeq ($(ARCH),mips)
NO_PERF_REGS := 0
CFLAGS += -I$(OUTPUT)arch/mips/include/generated
LIBUNWIND_LIBS = -lunwind -lunwind-mips
endif

ifeq ($(NO_PERF_REGS),0)
$(call detected,CONFIG_PERF_REGS)
endif

# So far there's only x86 and arm libdw unwind support merged in perf.
# Disable it on all other architectures in case libdw unwind
# support is detected in system. Add supported architectures
# to the check.
ifneq ($(SRCARCH),$(filter $(SRCARCH),x86 arm arm64 powerpc s390 csky riscv))
NO_LIBDW_DWARF_UNWIND := 1
endif

ifeq ($(LIBUNWIND_LIBS),)
NO_LIBUNWIND := 1
endif
#
# For linking with debug library, run like:
#
# make DEBUG=1 LIBUNWIND_DIR=/opt/libunwind/
#

libunwind_arch_set_flags = $(eval $(libunwind_arch_set_flags_code))
define libunwind_arch_set_flags_code
FEATURE_CHECK_CFLAGS-libunwind-$(1) = -I$(LIBUNWIND_DIR)/include
FEATURE_CHECK_LDFLAGS-libunwind-$(1) = -L$(LIBUNWIND_DIR)/lib
endef

ifdef LIBUNWIND_DIR
LIBUNWIND_CFLAGS = -I$(LIBUNWIND_DIR)/include
LIBUNWIND_LDFLAGS = -L$(LIBUNWIND_DIR)/lib
LIBUNWIND_ARCHS = x86 x86_64 arm aarch64 debug-frame-arm debug-frame-aarch64
$(foreach libunwind_arch,$(LIBUNWIND_ARCHS),$(call libunwind_arch_set_flags,$(libunwind_arch)))
endif

# Set per-feature check compilation flags
FEATURE_CHECK_CFLAGS-libunwind = $(LIBUNWIND_CFLAGS)
FEATURE_CHECK_LDFLAGS-libunwind = $(LIBUNWIND_LDFLAGS) $(LIBUNWIND_LIBS)
FEATURE_CHECK_CFLAGS-libunwind-debug-frame = $(LIBUNWIND_CFLAGS)
FEATURE_CHECK_LDFLAGS-libunwind-debug-frame = $(LIBUNWIND_LDFLAGS) $(LIBUNWIND_LIBS)

FEATURE_CHECK_LDFLAGS-libunwind-arm += -lunwind -lunwind-arm
FEATURE_CHECK_LDFLAGS-libunwind-aarch64 += -lunwind -lunwind-aarch64
FEATURE_CHECK_LDFLAGS-libunwind-x86 += -lunwind -llzma -lunwind-x86
FEATURE_CHECK_LDFLAGS-libunwind-x86_64 += -lunwind -llzma -lunwind-x86_64

FEATURE_CHECK_LDFLAGS-libcrypto = -lcrypto
FEATURE_CHECK_LDFLAGS-libcrypto += -DOPENSSL_API_COMPAT=0x10100000L

ifdef CSINCLUDES
LIBOPENCSD_CFLAGS := -I$(CSINCLUDES)
endif
OPENCSDLIBS := -lopencsd_c_api
ifeq ($(findstring -static,${LDFLAGS}),-static)
OPENCSDLIBS += -lopencsd -lstdc++
endif
ifdef CSLIBS
LIBOPENCSD_LDFLAGS := -L$(CSLIBS)
endif
FEATURE_CHECK_CFLAGS-libopencsd := $(LIBOPENCSD_CFLAGS)
FEATURE_CHECK_LDFLAGS-libopencsd := $(LIBOPENCSD_LDFLAGS) $(OPENCSDLIBS)

ifeq ($(NO_PERF_REGS),0)
CFLAGS += -DHAVE_PERF_REGS_SUPPORT
endif

# for linking with debug library, run like:
# make DEBUG=1 LIBDW_DIR=/opt/libdw/
ifdef LIBDW_DIR
LIBDW_CFLAGS := -I$(LIBDW_DIR)/include
LIBDW_LDFLAGS := -L$(LIBDW_DIR)/lib
endif
DWARFLIBS := -ldw
ifeq ($(findstring -static,${LDFLAGS}),-static)
DWARFLIBS += -lelf -lebl -ldl -lz -llzma -lbz2
endif
FEATURE_CHECK_CFLAGS-libdw-dwarf-unwind := $(LIBDW_CFLAGS)
FEATURE_CHECK_LDFLAGS-libdw-dwarf-unwind := $(LIBDW_LDFLAGS) $(DWARFLIBS)

# for linking with debug library, run like:
# make DEBUG=1 LIBBABELTRACE_DIR=/opt/libbabeltrace/
ifdef LIBBABELTRACE_DIR
LIBBABELTRACE_CFLAGS := -I$(LIBBABELTRACE_DIR)/include
LIBBABELTRACE_LDFLAGS := -L$(LIBBABELTRACE_DIR)/lib
endif
FEATURE_CHECK_CFLAGS-libbabeltrace := $(LIBBABELTRACE_CFLAGS)
FEATURE_CHECK_LDFLAGS-libbabeltrace := $(LIBBABELTRACE_LDFLAGS) -lbabeltrace-ctf

ifdef LIBZSTD_DIR
LIBZSTD_CFLAGS := -I$(LIBZSTD_DIR)/lib
LIBZSTD_LDFLAGS := -L$(LIBZSTD_DIR)/lib
endif
FEATURE_CHECK_CFLAGS-libzstd := $(LIBZSTD_CFLAGS)
FEATURE_CHECK_LDFLAGS-libzstd := $(LIBZSTD_LDFLAGS)

FEATURE_CHECK_CFLAGS-bpf = -I. -I$(srctree)/tools/include -I$(srctree)/tools/arch/$(SRCARCH)/include/uapi -I$(srctree)/tools/include/uapi
# include ARCH specific config
-include $(src-perf)/arch/$(SRCARCH)/Makefile

ifdef PERF_HAVE_ARCH_REGS_QUERY_REGISTER_OFFSET
CFLAGS += -DHAVE_ARCH_REGS_QUERY_REGISTER_OFFSET
endif

include $(srctree)/tools/scripts/utilities.mak

ifeq ($(call get-executable,$(FLEX)),)
dummy := $(error Error: $(FLEX) is missing on this system, please install it)
endif

ifeq ($(call get-executable,$(BISON)),)
dummy := $(error Error: $(BISON) is missing on this system, please install it)
endif

ifneq ($(OUTPUT),)
ifeq ($(shell expr $(shell $(BISON) --version | grep bison | sed -e 's/.\+ \([0-9]\+\).\([0-9]\+\).\([0-9]\+\)/\1\2\3/g') \>\= 371), 1)
BISON_FILE_PREFIX_MAP := --file-prefix-map=$(OUTPUT)=
endif
endif

# Treat warnings as errors unless directed not to
ifneq ($(WERROR),0)
CORE_CFLAGS += -Werror
CXXFLAGS += -Werror
HOSTCFLAGS += -Werror
endif

ifndef DEBUG
DEBUG := 0
endif

ifeq ($(DEBUG),0)
ifeq ($(CC_NO_CLANG), 0)
CORE_CFLAGS += -O3
else
CORE_CFLAGS += -O6
endif
endif

ifdef PARSER_DEBUG
PARSER_DEBUG_BISON := -t
PARSER_DEBUG_FLEX := -d
CFLAGS += -DPARSER_DEBUG
$(call detected_var,PARSER_DEBUG_BISON)
$(call detected_var,PARSER_DEBUG_FLEX)
endif

# Try different combinations to accommodate systems that only have
# python[2][3]-config in weird combinations in the following order of
# priority from lowest to highest:
# * python3-config
# * python-config
# * python2-config as per pep-0394.
# * $(PYTHON)-config (If PYTHON is user supplied but PYTHON_CONFIG isn't)
#
PYTHON_AUTO := python-config
PYTHON_AUTO := $(if $(call get-executable,python3-config),python3-config,$(PYTHON_AUTO))
PYTHON_AUTO := $(if $(call get-executable,python-config),python-config,$(PYTHON_AUTO))
PYTHON_AUTO := $(if $(call get-executable,python2-config),python2-config,$(PYTHON_AUTO))

# If PYTHON is defined but PYTHON_CONFIG isn't, then take $(PYTHON)-config as if it was the user
# supplied value for PYTHON_CONFIG. Because it's "user supplied", error out if it doesn't exist.
ifdef PYTHON
ifndef PYTHON_CONFIG
PYTHON_CONFIG_AUTO := $(call get-executable,$(PYTHON)-config)
PYTHON_CONFIG := $(if $(PYTHON_CONFIG_AUTO),$(PYTHON_CONFIG_AUTO),\
$(call $(error $(PYTHON)-config not found)))
endif
endif

# Select either auto detected python and python-config or use user supplied values if they are
# defined. get-executable-or-default fails with an error if the first argument is supplied but
# doesn't exist.
override PYTHON_CONFIG := $(call get-executable-or-default,PYTHON_CONFIG,$(PYTHON_AUTO))
override PYTHON := $(call get-executable-or-default,PYTHON,$(subst -config,,$(PYTHON_AUTO)))

grep-libs = $(filter -l%,$(1))
strip-libs = $(filter-out -l%,$(1))

PYTHON_CONFIG_SQ := $(call shell-sq,$(PYTHON_CONFIG))

# Python 3.8 changed the output of `python-config --ldflags` to not include the
# '-lpythonX.Y' flag unless '--embed' is also passed. The feature check for
# libpython fails if that flag is not included in LDFLAGS
ifeq ($(shell $(PYTHON_CONFIG_SQ) --ldflags --embed 2>&1 1>/dev/null; echo $$?), 0)
PYTHON_CONFIG_LDFLAGS := --ldflags --embed
else
PYTHON_CONFIG_LDFLAGS := --ldflags
endif

ifdef PYTHON_CONFIG
PYTHON_EMBED_LDOPTS := $(shell $(PYTHON_CONFIG_SQ) $(PYTHON_CONFIG_LDFLAGS) 2>/dev/null)
PYTHON_EMBED_LDFLAGS := $(call strip-libs,$(PYTHON_EMBED_LDOPTS))
PYTHON_EMBED_LIBADD := $(call grep-libs,$(PYTHON_EMBED_LDOPTS)) -lutil
PYTHON_EMBED_CCOPTS := $(shell $(PYTHON_CONFIG_SQ) --includes 2>/dev/null)
FLAGS_PYTHON_EMBED := $(PYTHON_EMBED_CCOPTS) $(PYTHON_EMBED_LDOPTS)
ifeq ($(CC_NO_CLANG), 0)
PYTHON_EMBED_CCOPTS := $(filter-out -ffat-lto-objects, $(PYTHON_EMBED_CCOPTS))
endif
endif

FEATURE_CHECK_CFLAGS-libpython := $(PYTHON_EMBED_CCOPTS)
FEATURE_CHECK_LDFLAGS-libpython := $(PYTHON_EMBED_LDOPTS)

FEATURE_CHECK_LDFLAGS-libaio = -lrt

FEATURE_CHECK_LDFLAGS-disassembler-four-args = -lbfd -lopcodes -ldl

CORE_CFLAGS += -fno-omit-frame-pointer
CORE_CFLAGS += -ggdb3
CORE_CFLAGS += -funwind-tables
CORE_CFLAGS += -Wall
CORE_CFLAGS += -Wextra
CORE_CFLAGS += -std=gnu11

CXXFLAGS += -std=gnu++14 -fno-exceptions -fno-rtti
CXXFLAGS += -Wall
CXXFLAGS += -fno-omit-frame-pointer
CXXFLAGS += -ggdb3
CXXFLAGS += -funwind-tables
CXXFLAGS += -Wno-strict-aliasing

HOSTCFLAGS += -Wall
HOSTCFLAGS += -Wextra

# Enforce a non-executable stack, as we may regress (again) in the future by
# adding assembler files missing the .GNU-stack linker note.
LDFLAGS += -Wl,-z,noexecstack

EXTLIBS = -lpthread -lrt -lm -ldl

ifneq ($(TCMALLOC),)
CFLAGS += -fno-builtin-malloc -fno-builtin-calloc -fno-builtin-realloc -fno-builtin-free
EXTLIBS += -ltcmalloc
endif

ifeq ($(FEATURES_DUMP),)
# We will display at the end of this Makefile.config, using $(call feature_display_entries)
# As we may retry some feature detection here, see the disassembler-four-args case, for instance
FEATURE_DISPLAY_DEFERRED := 1
include $(srctree)/tools/build/Makefile.feature
else
include $(FEATURES_DUMP)
endif

ifeq ($(feature-stackprotector-all), 1)
CORE_CFLAGS += -fstack-protector-all
endif

ifeq ($(DEBUG),0)
ifeq ($(feature-fortify-source), 1)
CORE_CFLAGS += -D_FORTIFY_SOURCE=2
endif
endif

INC_FLAGS += -I$(srctree)/tools/lib/perf/include
INC_FLAGS += -I$(src-perf)/util/include
INC_FLAGS += -I$(src-perf)/arch/$(SRCARCH)/include
INC_FLAGS += -I$(srctree)/tools/include/
INC_FLAGS += -I$(srctree)/tools/arch/$(SRCARCH)/include/uapi
INC_FLAGS += -I$(srctree)/tools/include/uapi
INC_FLAGS += -I$(srctree)/tools/arch/$(SRCARCH)/include/
INC_FLAGS += -I$(srctree)/tools/arch/$(SRCARCH)/

# $(obj-perf) for generated common-cmds.h
# $(obj-perf)/util for generated bison/flex headers
ifneq ($(OUTPUT),)
INC_FLAGS += -I$(obj-perf)/util
INC_FLAGS += -I$(obj-perf)
endif

INC_FLAGS += -I$(src-perf)/util
INC_FLAGS += -I$(src-perf)
INC_FLAGS += -I$(srctree)/tools/lib/

CORE_CFLAGS += -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_GNU_SOURCE

CFLAGS += $(CORE_CFLAGS) $(INC_FLAGS)
CXXFLAGS += $(INC_FLAGS)

LIBPERF_CFLAGS := $(CORE_CFLAGS) $(EXTRA_CFLAGS)

ifeq ($(feature-pthread-attr-setaffinity-np), 1)
CFLAGS += -DHAVE_PTHREAD_ATTR_SETAFFINITY_NP
endif

ifeq ($(feature-pthread-barrier), 1)
CFLAGS += -DHAVE_PTHREAD_BARRIER
endif

ifndef NO_BIONIC
$(call feature_check,bionic)
ifeq ($(feature-bionic), 1)
BIONIC := 1
CFLAGS += -DLACKS_SIGQUEUE_PROTOTYPE
CFLAGS += -DLACKS_OPEN_MEMSTREAM_PROTOTYPE
EXTLIBS := $(filter-out -lrt,$(EXTLIBS))
EXTLIBS := $(filter-out -lpthread,$(EXTLIBS))
endif
endif

ifeq ($(feature-eventfd), 1)
CFLAGS += -DHAVE_EVENTFD_SUPPORT
endif

ifeq ($(feature-get_current_dir_name), 1)
CFLAGS += -DHAVE_GET_CURRENT_DIR_NAME
endif

ifeq ($(feature-gettid), 1)
CFLAGS += -DHAVE_GETTID
endif

ifeq ($(feature-file-handle), 1)
CFLAGS += -DHAVE_FILE_HANDLE
endif

ifdef NO_LIBELF
NO_DWARF := 1
NO_DEMANGLE := 1
NO_LIBUNWIND := 1
NO_LIBDW_DWARF_UNWIND := 1
NO_LIBBPF := 1
NO_JVMTI := 1
else
ifeq ($(feature-libelf), 0)
ifeq ($(feature-glibc), 1)
LIBC_SUPPORT := 1
endif
ifeq ($(BIONIC),1)
LIBC_SUPPORT := 1
endif
ifeq ($(LIBC_SUPPORT),1)
msg := $(warning No libelf found. Disables 'probe' tool, jvmti and BPF support in 'perf record'. Please install libelf-dev, libelf-devel or elfutils-libelf-devel);

NO_LIBELF := 1
NO_DWARF := 1
NO_DEMANGLE := 1
NO_LIBUNWIND := 1
NO_LIBDW_DWARF_UNWIND := 1
NO_LIBBPF := 1
NO_JVMTI := 1
else
ifneq ($(filter s% -fsanitize=address%,$(EXTRA_CFLAGS),),)
ifneq ($(shell ldconfig -p | grep libasan >/dev/null 2>&1; echo $$?), 0)
msg := $(error No libasan found, please install libasan);
endif
endif

ifneq ($(filter s% -fsanitize=undefined%,$(EXTRA_CFLAGS),),)
ifneq ($(shell ldconfig -p | grep libubsan >/dev/null 2>&1; echo $$?), 0)
msg := $(error No libubsan found, please install libubsan);
endif
endif

ifneq ($(filter s% -static%,$(LDFLAGS),),)
msg := $(error No static glibc found, please install glibc-static);
else
msg := $(error No gnu/libc-version.h found, please install glibc-dev[el]);
endif
endif
else
ifndef NO_LIBDW_DWARF_UNWIND
ifneq ($(feature-libdw-dwarf-unwind),1)
NO_LIBDW_DWARF_UNWIND := 1
msg := $(warning No libdw DWARF unwind found, Please install elfutils-devel/libdw-dev >= 0.158 and/or set LIBDW_DIR);
endif
endif
ifneq ($(feature-dwarf), 1)
ifndef NO_DWARF
msg := $(warning No libdw.h found or old libdw.h found or elfutils is older than 0.138, disables dwarf support. Please install new elfutils-devel/libdw-dev);
NO_DWARF := 1
endif
else
ifneq ($(feature-dwarf_getlocations), 1)
msg := $(warning Old libdw.h, finding variables at given 'perf probe' point will not work, install elfutils-devel/libdw-dev >= 0.157);
else
CFLAGS += -DHAVE_DWARF_GETLOCATIONS_SUPPORT
endif # dwarf_getlocations
endif # Dwarf support
endif # libelf support
endif # NO_LIBELF

ifeq ($(feature-glibc), 1)
CFLAGS += -DHAVE_GLIBC_SUPPORT
endif

ifeq ($(feature-libaio), 1)
ifndef NO_AIO
CFLAGS += -DHAVE_AIO_SUPPORT
endif
endif

ifdef NO_DWARF
NO_LIBDW_DWARF_UNWIND := 1
endif

ifeq ($(feature-sched_getcpu), 1)
CFLAGS += -DHAVE_SCHED_GETCPU_SUPPORT
endif

ifeq ($(feature-setns), 1)
CFLAGS += -DHAVE_SETNS_SUPPORT
$(call detected,CONFIG_SETNS)
endif

ifdef CORESIGHT
$(call feature_check,libopencsd)
ifeq ($(feature-libopencsd), 1)
CFLAGS += -DHAVE_CSTRACE_SUPPORT $(LIBOPENCSD_CFLAGS)
ifeq ($(feature-reallocarray), 0)
CFLAGS += -DCOMPAT_NEED_REALLOCARRAY
endif
LDFLAGS += $(LIBOPENCSD_LDFLAGS)
EXTLIBS += $(OPENCSDLIBS)
$(call detected,CONFIG_LIBOPENCSD)
ifdef CSTRACE_RAW
CFLAGS += -DCS_DEBUG_RAW
ifeq (${CSTRACE_RAW}, packed)
CFLAGS += -DCS_RAW_PACKED
endif
endif
else
dummy := $(error Error: No libopencsd library found or the version is not up-to-date. Please install recent libopencsd to build with CORESIGHT=1)
endif
endif

ifndef NO_LIBELF
CFLAGS += -DHAVE_LIBELF_SUPPORT
EXTLIBS += -lelf
$(call detected,CONFIG_LIBELF)

ifeq ($(feature-libelf-getphdrnum), 1)
CFLAGS += -DHAVE_ELF_GETPHDRNUM_SUPPORT
endif

ifeq ($(feature-libelf-gelf_getnote), 1)
CFLAGS += -DHAVE_GELF_GETNOTE_SUPPORT
else
msg := $(warning gelf_getnote() not found on libelf, SDT support disabled);
endif

ifeq ($(feature-libelf-getshdrstrndx), 1)
CFLAGS += -DHAVE_ELF_GETSHDRSTRNDX_SUPPORT
endif

ifndef NO_LIBDEBUGINFOD
$(call feature_check,libdebuginfod)
ifeq ($(feature-libdebuginfod), 1)
CFLAGS += -DHAVE_DEBUGINFOD_SUPPORT
EXTLIBS += -ldebuginfod
endif
endif

ifndef NO_DWARF
ifeq ($(origin PERF_HAVE_DWARF_REGS), undefined)
msg := $(warning DWARF register mappings have not been defined for architecture $(SRCARCH), DWARF support disabled);
NO_DWARF := 1
else
CFLAGS += -DHAVE_DWARF_SUPPORT $(LIBDW_CFLAGS)
LDFLAGS += $(LIBDW_LDFLAGS)
EXTLIBS += ${DWARFLIBS}
$(call detected,CONFIG_DWARF)
endif # PERF_HAVE_DWARF_REGS
endif # NO_DWARF

ifndef NO_LIBBPF
ifeq ($(feature-bpf), 1)
CFLAGS += -DHAVE_LIBBPF_SUPPORT
$(call detected,CONFIG_LIBBPF)

# detecting libbpf without LIBBPF_DYNAMIC, so make VF=1 shows libbpf detection status
$(call feature_check,libbpf)
ifdef LIBBPF_DYNAMIC
ifeq ($(feature-libbpf), 1)
EXTLIBS += -lbpf
$(call detected,CONFIG_LIBBPF_DYNAMIC)

$(call feature_check,libbpf-btf__load_from_kernel_by_id)
ifeq ($(feature-libbpf-btf__load_from_kernel_by_id), 1)
CFLAGS += -DHAVE_LIBBPF_BTF__LOAD_FROM_KERNEL_BY_ID
endif
$(call feature_check,libbpf-bpf_prog_load)
ifeq ($(feature-libbpf-bpf_prog_load), 1)
CFLAGS += -DHAVE_LIBBPF_BPF_PROG_LOAD
endif
$(call feature_check,libbpf-bpf_object__next_program)
ifeq ($(feature-libbpf-bpf_object__next_program), 1)
CFLAGS += -DHAVE_LIBBPF_BPF_OBJECT__NEXT_PROGRAM
endif
$(call feature_check,libbpf-bpf_object__next_map)
ifeq ($(feature-libbpf-bpf_object__next_map), 1)
CFLAGS += -DHAVE_LIBBPF_BPF_OBJECT__NEXT_MAP
endif
$(call feature_check,libbpf-btf__raw_data)
ifeq ($(feature-libbpf-btf__raw_data), 1)
CFLAGS += -DHAVE_LIBBPF_BTF__RAW_DATA
endif
$(call feature_check,libbpf-bpf_map_create)
ifeq ($(feature-libbpf-bpf_map_create), 1)
CFLAGS += -DHAVE_LIBBPF_BPF_MAP_CREATE
endif
else
dummy := $(error Error: No libbpf devel library found, please install libbpf-devel);
endif
else
CFLAGS += -DHAVE_LIBBPF_BTF__LOAD_FROM_KERNEL_BY_ID
CFLAGS += -DHAVE_LIBBPF_BPF_PROG_LOAD
CFLAGS += -DHAVE_LIBBPF_BPF_OBJECT__NEXT_PROGRAM
CFLAGS += -DHAVE_LIBBPF_BPF_OBJECT__NEXT_MAP
CFLAGS += -DHAVE_LIBBPF_BTF__RAW_DATA
CFLAGS += -DHAVE_LIBBPF_BPF_MAP_CREATE
endif
endif

ifndef NO_DWARF
ifdef PERF_HAVE_ARCH_REGS_QUERY_REGISTER_OFFSET
CFLAGS += -DHAVE_BPF_PROLOGUE
$(call detected,CONFIG_BPF_PROLOGUE)
else
msg := $(warning BPF prologue is not supported by architecture $(SRCARCH), missing regs_query_register_offset());
endif
else
msg := $(warning DWARF support is off, BPF prologue is disabled);
endif

endif # NO_LIBBPF
endif # NO_LIBELF

ifndef NO_SDT
ifneq ($(feature-sdt), 1)
msg := $(warning No sys/sdt.h found, no SDT events are defined, please install systemtap-sdt-devel or systemtap-sdt-dev);
NO_SDT := 1;
else
CFLAGS += -DHAVE_SDT_EVENT
$(call detected,CONFIG_SDT_EVENT)
endif
endif

ifdef PERF_HAVE_JITDUMP
ifndef NO_LIBELF
$(call detected,CONFIG_JITDUMP)
CFLAGS += -DHAVE_JITDUMP
endif
endif

ifeq ($(SRCARCH),powerpc)
ifndef NO_DWARF
CFLAGS += -DHAVE_SKIP_CALLCHAIN_IDX
endif
endif

ifndef NO_LIBUNWIND
have_libunwind :=

$(call feature_check,libunwind-x86)
ifeq ($(feature-libunwind-x86), 1)
$(call detected,CONFIG_LIBUNWIND_X86)
CFLAGS += -DHAVE_LIBUNWIND_X86_SUPPORT
LDFLAGS += -lunwind-x86
EXTLIBS_LIBUNWIND += -lunwind-x86
have_libunwind = 1
endif

$(call feature_check,libunwind-aarch64)
ifeq ($(feature-libunwind-aarch64), 1)
$(call detected,CONFIG_LIBUNWIND_AARCH64)
CFLAGS += -DHAVE_LIBUNWIND_AARCH64_SUPPORT
LDFLAGS += -lunwind-aarch64
EXTLIBS_LIBUNWIND += -lunwind-aarch64
have_libunwind = 1
$(call feature_check,libunwind-debug-frame-aarch64)
ifneq ($(feature-libunwind-debug-frame-aarch64), 1)
msg := $(warning No debug_frame support found in libunwind-aarch64);
CFLAGS += -DNO_LIBUNWIND_DEBUG_FRAME_AARCH64
endif
endif

ifneq ($(feature-libunwind), 1)
msg := $(warning No libunwind found. Please install libunwind-dev[el] >= 1.1 and/or set LIBUNWIND_DIR);
NO_LOCAL_LIBUNWIND := 1
else
have_libunwind := 1
$(call detected,CONFIG_LOCAL_LIBUNWIND)
endif

ifneq ($(have_libunwind), 1)
NO_LIBUNWIND := 1
endif
else
NO_LOCAL_LIBUNWIND := 1
endif

ifndef NO_LIBBPF
ifneq ($(feature-bpf), 1)
msg := $(warning BPF API too old. Please install recent kernel headers. BPF support in 'perf record' is disabled.)
NO_LIBBPF := 1
endif
endif

ifdef BUILD_BPF_SKEL
$(call feature_check,clang-bpf-co-re)
ifeq ($(feature-clang-bpf-co-re), 0)
dummy := $(error Error: clang too old/not installed. Please install recent clang to build with BUILD_BPF_SKEL)
endif
ifeq ($(filter -DHAVE_LIBBPF_SUPPORT, $(CFLAGS)),)
dummy := $(error Error: BPF skeleton support requires libbpf)
endif
$(call detected,CONFIG_PERF_BPF_SKEL)
CFLAGS += -DHAVE_BPF_SKEL
endif

dwarf-post-unwind := 1
dwarf-post-unwind-text := BUG

# setup DWARF post unwinder
ifdef NO_LIBUNWIND
ifdef NO_LIBDW_DWARF_UNWIND
msg := $(warning Disabling post unwind, no support found.);
dwarf-post-unwind := 0
else
dwarf-post-unwind-text := libdw
$(call detected,CONFIG_LIBDW_DWARF_UNWIND)
endif
else
dwarf-post-unwind-text := libunwind
$(call detected,CONFIG_LIBUNWIND)
# Enable libunwind support by default.
ifndef NO_LIBDW_DWARF_UNWIND
NO_LIBDW_DWARF_UNWIND := 1
endif
endif

ifeq ($(dwarf-post-unwind),1)
CFLAGS += -DHAVE_DWARF_UNWIND_SUPPORT
$(call detected,CONFIG_DWARF_UNWIND)
else
NO_DWARF_UNWIND := 1
endif

ifndef NO_LOCAL_LIBUNWIND
ifeq ($(SRCARCH),$(filter $(SRCARCH),arm arm64))
$(call feature_check,libunwind-debug-frame)
ifneq ($(feature-libunwind-debug-frame), 1)
msg := $(warning No debug_frame support found in libunwind);
CFLAGS += -DNO_LIBUNWIND_DEBUG_FRAME
endif
else
# non-ARM has no dwarf_find_debug_frame() function:
CFLAGS += -DNO_LIBUNWIND_DEBUG_FRAME
endif
EXTLIBS += $(LIBUNWIND_LIBS)
LDFLAGS += $(LIBUNWIND_LIBS)
endif
ifeq ($(findstring -static,${LDFLAGS}),-static)
# gcc -static links libgcc_eh which contans piece of libunwind
LIBUNWIND_LDFLAGS += -Wl,--allow-multiple-definition
endif

ifndef NO_LIBUNWIND
CFLAGS += -DHAVE_LIBUNWIND_SUPPORT
CFLAGS += $(LIBUNWIND_CFLAGS)
LDFLAGS += $(LIBUNWIND_LDFLAGS)
EXTLIBS += $(EXTLIBS_LIBUNWIND)
endif

ifeq ($(NO_SYSCALL_TABLE),0)
$(call detected,CONFIG_TRACE)
else
ifndef NO_LIBAUDIT
$(call feature_check,libaudit)
ifneq ($(feature-libaudit), 1)
msg := $(warning No libaudit.h found, disables 'trace' tool, please install audit-libs-devel or libaudit-dev);
NO_LIBAUDIT := 1
else
CFLAGS += -DHAVE_LIBAUDIT_SUPPORT
EXTLIBS += -laudit
$(call detected,CONFIG_TRACE)
endif
endif
endif

ifndef NO_LIBCRYPTO
ifneq ($(feature-libcrypto), 1)
msg := $(warning No libcrypto.h found, disables jitted code injection, please install openssl-devel or libssl-dev);
NO_LIBCRYPTO := 1
else
CFLAGS += -DHAVE_LIBCRYPTO_SUPPORT
EXTLIBS += -lcrypto
EXTLIBS += -DOPENSSL_API_COMPAT=0x10100000L
$(call detected,CONFIG_CRYPTO)
endif
endif

ifdef NO_NEWT
NO_SLANG=1
endif

ifndef NO_SLANG
ifneq ($(feature-libslang), 1)
ifneq ($(feature-libslang-include-subdir), 1)
msg := $(warning slang not found, disables TUI support. Please install slang-devel, libslang-dev or libslang2-dev);
NO_SLANG := 1
else
CFLAGS += -DHAVE_SLANG_INCLUDE_SUBDIR
endif
endif
ifndef NO_SLANG
# Fedora has /usr/include/slang/slang.h, but ubuntu /usr/include/slang.h
CFLAGS += -DHAVE_SLANG_SUPPORT
EXTLIBS += -lslang
$(call detected,CONFIG_SLANG)
endif
endif

ifdef GTK2
FLAGS_GTK2=$(CFLAGS) $(LDFLAGS) $(EXTLIBS) $(shell $(PKG_CONFIG) --libs --cflags gtk+-2.0 2>/dev/null)
$(call feature_check,gtk2)
ifneq ($(feature-gtk2), 1)
msg := $(warning GTK2 not found, disables GTK2 support. Please install gtk2-devel or libgtk2.0-dev);
NO_GTK2 := 1
else
$(call feature_check,gtk2-infobar)
ifeq ($(feature-gtk2-infobar), 1)
GTK_CFLAGS := -DHAVE_GTK_INFO_BAR_SUPPORT
endif
CFLAGS += -DHAVE_GTK2_SUPPORT
GTK_CFLAGS += $(shell $(PKG_CONFIG) --cflags gtk+-2.0 2>/dev/null)
GTK_LIBS := $(shell $(PKG_CONFIG) --libs gtk+-2.0 2>/dev/null)
EXTLIBS += -ldl
endif
endif

ifdef NO_LIBPERL
CFLAGS += -DNO_LIBPERL
else
PERL_EMBED_LDOPTS = $(shell perl -MExtUtils::Embed -e ldopts 2>/dev/null)
PERL_EMBED_LDFLAGS = $(call strip-libs,$(PERL_EMBED_LDOPTS))
PERL_EMBED_LIBADD = $(call grep-libs,$(PERL_EMBED_LDOPTS))
PERL_EMBED_CCOPTS = $(shell perl -MExtUtils::Embed -e ccopts 2>/dev/null)
PERL_EMBED_CCOPTS := $(filter-out -specs=%,$(PERL_EMBED_CCOPTS))
PERL_EMBED_CCOPTS := $(filter-out -flto=auto -ffat-lto-objects, $(PERL_EMBED_CCOPTS))
PERL_EMBED_LDOPTS := $(filter-out -specs=%,$(PERL_EMBED_LDOPTS))
FLAGS_PERL_EMBED=$(PERL_EMBED_CCOPTS) $(PERL_EMBED_LDOPTS)

ifneq ($(feature-libperl), 1)
CFLAGS += -DNO_LIBPERL
NO_LIBPERL := 1
msg := $(warning Missing perl devel files. Disabling perl scripting support, please install perl-ExtUtils-Embed/libperl-dev);
else
LDFLAGS += $(PERL_EMBED_LDFLAGS)
EXTLIBS += $(PERL_EMBED_LIBADD)
CFLAGS += -DHAVE_LIBPERL_SUPPORT
ifeq ($(CC_NO_CLANG), 0)
CFLAGS += -Wno-compound-token-split-by-macro
endif
$(call detected,CONFIG_LIBPERL)
endif
endif

ifeq ($(feature-timerfd), 1)
CFLAGS += -DHAVE_TIMERFD_SUPPORT
else
msg := $(warning No timerfd support. Disables 'perf kvm stat live');
endif

disable-python = $(eval $(disable-python_code))
define disable-python_code
CFLAGS += -DNO_LIBPYTHON
$(warning $1)
NO_LIBPYTHON := 1
endef

ifdef NO_LIBPYTHON
$(call disable-python,Python support disabled by user)
else

ifndef PYTHON
$(call disable-python,No python interpreter was found: disables Python support - please install python-devel/python-dev)
else
PYTHON_WORD := $(call shell-wordify,$(PYTHON))

ifndef PYTHON_CONFIG
$(call disable-python,No 'python-config' tool was found: disables Python support - please install python-devel/python-dev)
else

ifneq ($(feature-libpython), 1)
$(call disable-python,No 'Python.h' (for Python 2.x support) was found: disables Python support - please install python-devel/python-dev)
else
LDFLAGS += $(PYTHON_EMBED_LDFLAGS)
EXTLIBS += $(PYTHON_EMBED_LIBADD)
LANG_BINDINGS += $(obj-perf)python/perf.so
CFLAGS += -DHAVE_LIBPYTHON_SUPPORT
$(call detected,CONFIG_LIBPYTHON)
endif
endif
endif
endif

ifndef NO_LIBBFD
ifeq ($(feature-libbfd), 1)
EXTLIBS += -lbfd -lopcodes
else
# we are on a system that requires -liberty and (maybe) -lz
# to link against -lbfd; test each case individually here

# call all detections now so we get correct
# status in VF output
$(call feature_check,libbfd-liberty)
$(call feature_check,libbfd-liberty-z)

ifeq ($(feature-libbfd-liberty), 1)
EXTLIBS += -lbfd -lopcodes -liberty
FEATURE_CHECK_LDFLAGS-disassembler-four-args += -liberty -ldl
else
ifeq ($(feature-libbfd-liberty-z), 1)
EXTLIBS += -lbfd -lopcodes -liberty -lz
FEATURE_CHECK_LDFLAGS-disassembler-four-args += -liberty -lz -ldl
endif
endif
$(call feature_check,disassembler-four-args)
endif

ifeq ($(feature-libbfd-buildid), 1)
CFLAGS += -DHAVE_LIBBFD_BUILDID_SUPPORT
else
msg := $(warning Old version of libbfd/binutils things like PE executable profiling will not be available);
endif
endif

ifdef NO_DEMANGLE
CFLAGS += -DNO_DEMANGLE
else
ifdef HAVE_CPLUS_DEMANGLE_SUPPORT
EXTLIBS += -liberty
else
ifeq ($(filter -liberty,$(EXTLIBS)),)
$(call feature_check,cplus-demangle)

# we dont have neither HAVE_CPLUS_DEMANGLE_SUPPORT
# or any of 'bfd iberty z' trinity
ifeq ($(feature-cplus-demangle), 1)
EXTLIBS += -liberty
else
msg := $(warning No bfd.h/libbfd found, please install binutils-dev[el]/zlib-static/libiberty-dev to gain symbol demangling)
CFLAGS += -DNO_DEMANGLE
endif
endif
endif

ifneq ($(filter -liberty,$(EXTLIBS)),)
CFLAGS += -DHAVE_CPLUS_DEMANGLE_SUPPORT
endif
endif

ifneq ($(filter -lbfd,$(EXTLIBS)),)
CFLAGS += -DHAVE_LIBBFD_SUPPORT
endif

ifndef NO_ZLIB
ifeq ($(feature-zlib), 1)
CFLAGS += -DHAVE_ZLIB_SUPPORT
EXTLIBS += -lz
$(call detected,CONFIG_ZLIB)
else
NO_ZLIB := 1
endif
endif

ifndef NO_LZMA
ifeq ($(feature-lzma), 1)
CFLAGS += -DHAVE_LZMA_SUPPORT
EXTLIBS += -llzma
$(call detected,CONFIG_LZMA)
else
msg := $(warning No liblzma found, disables xz kernel module decompression, please install xz-devel/liblzma-dev);
NO_LZMA := 1
endif
endif

ifndef NO_LIBZSTD
ifeq ($(feature-libzstd), 1)
CFLAGS += -DHAVE_ZSTD_SUPPORT
CFLAGS += $(LIBZSTD_CFLAGS)
LDFLAGS += $(LIBZSTD_LDFLAGS)
EXTLIBS += -lzstd
$(call detected,CONFIG_ZSTD)
else
msg := $(warning No libzstd found, disables trace compression, please install libzstd-dev[el] and/or set LIBZSTD_DIR);
NO_LIBZSTD := 1
endif
endif

ifndef NO_LIBCAP
ifeq ($(feature-libcap), 1)
CFLAGS += -DHAVE_LIBCAP_SUPPORT
EXTLIBS += -lcap
$(call detected,CONFIG_LIBCAP)
else
msg := $(warning No libcap found, disables capability support, please install libcap-devel/libcap-dev);
NO_LIBCAP := 1
endif
endif

ifndef NO_BACKTRACE
ifeq ($(feature-backtrace), 1)
CFLAGS += -DHAVE_BACKTRACE_SUPPORT
endif
endif

ifndef NO_LIBNUMA
ifeq ($(feature-libnuma), 0)
msg := $(warning No numa.h found, disables 'perf bench numa mem' benchmark, please install numactl-devel/libnuma-devel/libnuma-dev);
NO_LIBNUMA := 1
else
ifeq ($(feature-numa_num_possible_cpus), 0)
msg := $(warning Old numa library found, disables 'perf bench numa mem' benchmark, please install numactl-devel/libnuma-devel/libnuma-dev >= 2.0.8);
NO_LIBNUMA := 1
else
CFLAGS += -DHAVE_LIBNUMA_SUPPORT
EXTLIBS += -lnuma
$(call detected,CONFIG_NUMA)
endif
endif
endif

ifdef HAVE_KVM_STAT_SUPPORT
CFLAGS += -DHAVE_KVM_STAT_SUPPORT
endif

ifeq ($(feature-disassembler-four-args), 1)
CFLAGS += -DDISASM_FOUR_ARGS_SIGNATURE
endif

ifeq (${IS_64_BIT}, 1)
ifndef NO_PERF_READ_VDSO32
$(call feature_check,compile-32)
ifeq ($(feature-compile-32), 1)
CFLAGS += -DHAVE_PERF_READ_VDSO32
else
NO_PERF_READ_VDSO32 := 1
endif
endif
ifneq ($(SRCARCH), x86)
NO_PERF_READ_VDSOX32 := 1
endif
ifndef NO_PERF_READ_VDSOX32
$(call feature_check,compile-x32)
ifeq ($(feature-compile-x32), 1)
CFLAGS += -DHAVE_PERF_READ_VDSOX32
else
NO_PERF_READ_VDSOX32 := 1
endif
endif
else
NO_PERF_READ_VDSO32 := 1
NO_PERF_READ_VDSOX32 := 1
endif

ifndef NO_LIBBABELTRACE
$(call feature_check,libbabeltrace)
ifeq ($(feature-libbabeltrace), 1)
CFLAGS += -DHAVE_LIBBABELTRACE_SUPPORT $(LIBBABELTRACE_CFLAGS)
LDFLAGS += $(LIBBABELTRACE_LDFLAGS)
EXTLIBS += -lbabeltrace-ctf
$(call detected,CONFIG_LIBBABELTRACE)
else
msg := $(warning No libbabeltrace found, disables 'perf data' CTF format support, please install libbabeltrace-dev[el]/libbabeltrace-ctf-dev);
endif
endif

ifndef NO_AUXTRACE
ifeq ($(SRCARCH),x86)
ifeq ($(feature-get_cpuid), 0)
msg := $(warning Your gcc lacks the __get_cpuid() builtin, disables support for auxtrace/Intel PT, please install a newer gcc);
NO_AUXTRACE := 1
endif
endif
ifndef NO_AUXTRACE
$(call detected,CONFIG_AUXTRACE)
CFLAGS += -DHAVE_AUXTRACE_SUPPORT
ifeq ($(feature-reallocarray), 0)
CFLAGS += -DCOMPAT_NEED_REALLOCARRAY
endif
endif
endif

ifndef NO_JVMTI
ifneq (,$(wildcard /usr/sbin/update-java-alternatives))
JDIR=$(shell /usr/sbin/update-java-alternatives -l | head -1 | awk '{print $$3}')
else
ifneq (,$(wildcard /usr/sbin/alternatives))
JDIR=$(shell /usr/sbin/alternatives --display java | tail -1 | cut -d' ' -f 5 | sed -e 's%/jre/bin/java.%%g' -e 's%/bin/java.%%g')
endif
endif
ifndef JDIR
$(warning No alternatives command found, you need to set JDIR= to point to the root of your Java directory)
NO_JVMTI := 1
endif
endif

ifndef NO_JVMTI
FEATURE_CHECK_CFLAGS-jvmti := -I$(JDIR)/include -I$(JDIR)/include/linux
$(call feature_check,jvmti)
ifeq ($(feature-jvmti), 1)
$(call detected_var,JDIR)
ifndef NO_JVMTI_CMLR
FEATURE_CHECK_CFLAGS-jvmti-cmlr := $(FEATURE_CHECK_CFLAGS-jvmti)
$(call feature_check,jvmti-cmlr)
ifeq ($(feature-jvmti-cmlr), 1)
CFLAGS += -DHAVE_JVMTI_CMLR
endif
endif # NO_JVMTI_CMLR
else
$(warning No openjdk development package found, please install JDK package, e.g. openjdk-8-jdk, java-1.8.0-openjdk-devel)
NO_JVMTI := 1
endif
endif

USE_CXX = 0
USE_CLANGLLVM = 0
ifdef LIBCLANGLLVM
$(call feature_check,cxx)
ifneq ($(feature-cxx), 1)
msg := $(warning No g++ found, disable clang and llvm support. Please install g++)
else
$(call feature_check,llvm)
$(call feature_check,llvm-version)
ifneq ($(feature-llvm), 1)
msg := $(warning No suitable libLLVM found, disabling builtin clang and LLVM support. Please install llvm-dev(el) (>= 3.9.0))
else
$(call feature_check,clang)
ifneq ($(feature-clang), 1)
msg := $(warning No suitable libclang found, disabling builtin clang and LLVM support. Please install libclang-dev(el) (>= 3.9.0))
else
CFLAGS += -DHAVE_LIBCLANGLLVM_SUPPORT
CXXFLAGS += -DHAVE_LIBCLANGLLVM_SUPPORT -I$(shell $(LLVM_CONFIG) --includedir)
$(call detected,CONFIG_CXX)
$(call detected,CONFIG_CLANGLLVM)
USE_CXX = 1
USE_LLVM = 1
USE_CLANG = 1
ifneq ($(feature-llvm-version),1)
msg := $(warning This version of LLVM is not tested. May cause build errors)
endif
endif
endif
endif
endif

ifdef LIBPFM4
$(call feature_check,libpfm4)
ifeq ($(feature-libpfm4), 1)
CFLAGS += -DHAVE_LIBPFM
EXTLIBS += -lpfm
ASCIIDOC_EXTRA = -aHAVE_LIBPFM=1
$(call detected,CONFIG_LIBPFM4)
else
msg := $(warning libpfm4 not found, disables libpfm4 support. Please install libpfm4-dev);
NO_LIBPFM4 := 1
endif
endif

ifdef LIBTRACEEVENT_DYNAMIC
$(call feature_check,libtraceevent)
ifeq ($(feature-libtraceevent), 1)
EXTLIBS += -ltraceevent
LIBTRACEEVENT_VERSION := $(shell $(PKG_CONFIG) --modversion libtraceevent)
LIBTRACEEVENT_VERSION_1 := $(word 1, $(subst ., ,$(LIBTRACEEVENT_VERSION)))
LIBTRACEEVENT_VERSION_2 := $(word 2, $(subst ., ,$(LIBTRACEEVENT_VERSION)))
LIBTRACEEVENT_VERSION_3 := $(word 3, $(subst ., ,$(LIBTRACEEVENT_VERSION)))
LIBTRACEEVENT_VERSION_CPP := $(shell expr $(LIBTRACEEVENT_VERSION_1) \* 255 \* 255 + $(LIBTRACEEVENT_VERSION_2) \* 255 + $(LIBTRACEEVENT_VERSION_3))
CFLAGS += -DLIBTRACEEVENT_VERSION=$(LIBTRACEEVENT_VERSION_CPP)
else
dummy := $(error Error: No libtraceevent devel library found, please install libtraceevent-devel);
endif
endif

ifdef LIBTRACEFS_DYNAMIC
$(call feature_check,libtracefs)
ifeq ($(feature-libtracefs), 1)
EXTLIBS += -ltracefs
LIBTRACEFS_VERSION := $(shell $(PKG_CONFIG) --modversion libtracefs)
LIBTRACEFS_VERSION_1 := $(word 1, $(subst ., ,$(LIBTRACEFS_VERSION)))
LIBTRACEFS_VERSION_2 := $(word 2, $(subst ., ,$(LIBTRACEFS_VERSION)))
LIBTRACEFS_VERSION_3 := $(word 3, $(subst ., ,$(LIBTRACEFS_VERSION)))
LIBTRACEFS_VERSION_CPP := $(shell expr $(LIBTRACEFS_VERSION_1) \* 255 \* 255 + $(LIBTRACEFS_VERSION_2) \* 255 + $(LIBTRACEFS_VERSION_3))
CFLAGS += -DLIBTRACEFS_VERSION=$(LIBTRACEFS_VERSION_CPP)
else
dummy := $(error Error: No libtracefs devel library found, please install libtracefs-dev);
endif
endif

# Among the variables below, these:
# perfexecdir
# perf_include_dir
# perf_examples_dir
# template_dir
# mandir
# infodir
# htmldir
# ETC_PERFCONFIG (but not sysconfdir)
# can be specified as a relative path some/where/else;
# this is interpreted as relative to $(prefix) and "perf" at
# runtime figures out where they are based on the path to the executable.
# This can help installing the suite in a relocatable way.

# Make the path relative to DESTDIR, not to prefix
ifndef DESTDIR
prefix ?= $(HOME)
endif
bindir_relative = bin
bindir = $(abspath $(prefix)/$(bindir_relative))
includedir_relative = include
includedir = $(abspath $(prefix)/$(includedir_relative))
mandir = share/man
infodir = share/info
perfexecdir = libexec/perf-core
perf_include_dir = lib/perf/include
perf_examples_dir = lib/perf/examples
sharedir = $(prefix)/share
template_dir = share/perf-core/templates
STRACE_GROUPS_DIR = share/perf-core/strace/groups
htmldir = share/doc/perf-doc
tipdir = share/doc/perf-tip
srcdir = $(srctree)/tools/perf
ifeq ($(prefix),/usr)
sysconfdir = /etc
ETC_PERFCONFIG = $(sysconfdir)/perfconfig
else
sysconfdir = $(prefix)/etc
ETC_PERFCONFIG = etc/perfconfig
endif
ifndef lib
ifeq ($(SRCARCH)$(IS_64_BIT), x861)
lib = lib64
else
lib = lib
endif
endif # lib
libdir = $(prefix)/$(lib)

# Shell quote (do not use $(call) to accommodate ancient setups);
ETC_PERFCONFIG_SQ = $(subst ','\'',$(ETC_PERFCONFIG))
STRACE_GROUPS_DIR_SQ = $(subst ','\'',$(STRACE_GROUPS_DIR))
DESTDIR_SQ = $(subst ','\'',$(DESTDIR))
bindir_SQ = $(subst ','\'',$(bindir))
includedir_SQ = $(subst ','\'',$(includedir))
mandir_SQ = $(subst ','\'',$(mandir))
infodir_SQ = $(subst ','\'',$(infodir))
perfexecdir_SQ = $(subst ','\'',$(perfexecdir))
perf_include_dir_SQ = $(subst ','\'',$(perf_include_dir))
perf_examples_dir_SQ = $(subst ','\'',$(perf_examples_dir))
template_dir_SQ = $(subst ','\'',$(template_dir))
htmldir_SQ = $(subst ','\'',$(htmldir))
tipdir_SQ = $(subst ','\'',$(tipdir))
prefix_SQ = $(subst ','\'',$(prefix))
sysconfdir_SQ = $(subst ','\'',$(sysconfdir))
libdir_SQ = $(subst ','\'',$(libdir))
srcdir_SQ = $(subst ','\'',$(srcdir))

ifneq ($(filter /%,$(firstword $(perfexecdir))),)
perfexec_instdir = $(perfexecdir)
perf_include_instdir = $(perf_include_dir)
perf_examples_instdir = $(perf_examples_dir)
STRACE_GROUPS_INSTDIR = $(STRACE_GROUPS_DIR)
tip_instdir = $(tipdir)
else
perfexec_instdir = $(prefix)/$(perfexecdir)
perf_include_instdir = $(prefix)/$(perf_include_dir)
perf_examples_instdir = $(prefix)/$(perf_examples_dir)
STRACE_GROUPS_INSTDIR = $(prefix)/$(STRACE_GROUPS_DIR)
tip_instdir = $(prefix)/$(tipdir)
endif
perfexec_instdir_SQ = $(subst ','\'',$(perfexec_instdir))
perf_include_instdir_SQ = $(subst ','\'',$(perf_include_instdir))
perf_examples_instdir_SQ = $(subst ','\'',$(perf_examples_instdir))
STRACE_GROUPS_INSTDIR_SQ = $(subst ','\'',$(STRACE_GROUPS_INSTDIR))
tip_instdir_SQ = $(subst ','\'',$(tip_instdir))

# If we install to $(HOME) we keep the traceevent default:
# $(HOME)/.traceevent/plugins
# Otherwise we install plugins into the global $(libdir).
ifdef DESTDIR
plugindir=$(libdir)/traceevent/plugins
plugindir_SQ= $(subst ','\'',$(plugindir))
endif

print_var = $(eval $(print_var_code)) $(info $(MSG))
define print_var_code
MSG = $(shell printf '...%30s: %s' $(1) $($(1)))
endef

ifeq ($(VF),1)
# Display EXTRA features which are detected manualy
# from here with feature_check call and thus cannot
# be partof global state output.
$(foreach feat,$(FEATURE_TESTS_EXTRA),$(call feature_print_status,$(feat),))
$(call print_var,prefix)
$(call print_var,bindir)
$(call print_var,libdir)
$(call print_var,sysconfdir)
$(call print_var,LIBUNWIND_DIR)
$(call print_var,LIBDW_DIR)
$(call print_var,JDIR)

ifeq ($(dwarf-post-unwind),1)
$(call feature_print_text,"DWARF post unwind library", $(dwarf-post-unwind-text))
endif
$(info )
endif

$(call detected_var,bindir_SQ)
$(call detected_var,PYTHON_WORD)
ifneq ($(OUTPUT),)
$(call detected_var,OUTPUT)
endif
$(call detected_var,htmldir_SQ)
$(call detected_var,infodir_SQ)
$(call detected_var,mandir_SQ)
$(call detected_var,ETC_PERFCONFIG_SQ)
$(call detected_var,STRACE_GROUPS_DIR_SQ)
$(call detected_var,prefix_SQ)
$(call detected_var,perfexecdir_SQ)
$(call detected_var,perf_include_dir_SQ)
$(call detected_var,perf_examples_dir_SQ)
$(call detected_var,tipdir_SQ)
$(call detected_var,srcdir_SQ)
$(call detected_var,LIBDIR)
$(call detected_var,GTK_CFLAGS)
$(call detected_var,PERL_EMBED_CCOPTS)
$(call detected_var,PYTHON_EMBED_CCOPTS)
ifneq ($(BISON_FILE_PREFIX_MAP),)
$(call detected_var,BISON_FILE_PREFIX_MAP)
endif

# re-generate FEATURE-DUMP as we may have called feature_check, found out
# extra libraries to add to LDFLAGS of some other test and then redo those
# tests, see the block about libbfd, disassembler-four-args, for instance.
$(shell rm -f $(FEATURE_DUMP_FILENAME))
$(foreach feat,$(FEATURE_TESTS),$(shell echo "$(call feature_assign,$(feat))" >> $(FEATURE_DUMP_FILENAME)))

ifeq ($(feature_display),1)
$(call feature_display_entries)
endif