[PATCH v1] arm64: dts: qcom: sc7280: Update lpassaudio clock controller for resets

[PATCH v1] arm64: dts: qcom: sc7280: Update lpassaudio clock controller for resets

[Taniya Das]

The lpass audio supports TX/RX/WSA block resets. The LPASS PIL clock
driver is not supported and mark it disabled. Also to keep consistency
update lpasscore to lpass_core.

Fixes: 9499240d15f2 ("arm64: dts: qcom: sc7280: Add lpasscore & lpassaudio clock controllers")
Signed-off-by: Taniya Das <quic_tdas@quicinc.com>
---
 arch/arm64/boot/dts/qcom/sc7280.dtsi | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
index e66fc67de206..180cfd2765b9 100644
--- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
@@ -2174,6 +2174,7 @@
 			clocks = <&gcc GCC_CFG_NOC_LPASS_CLK>;
 			clock-names = "iface";
 			#clock-cells = <1>;
+			status = "disabled";
 		};

 		lpass_audiocc: clock-controller@3300000 {
@@ -2185,6 +2186,7 @@
 			power-domains = <&lpass_aon LPASS_AON_CC_LPASS_AUDIO_HM_GDSC>;
 			#clock-cells = <1>;
 			#power-domain-cells = <1>;
+			#reset-cells = <1>;
 		};

 		lpass_aon: clock-controller@3380000 {
@@ -2198,7 +2200,7 @@
 			#power-domain-cells = <1>;
 		};

-		lpasscore: clock-controller@3900000 {
+		lpass_core: clock-controller@3900000 {
 			compatible = "qcom,sc7280-lpasscorecc";
 			reg = <0 0x03900000 0 0x50000>;
 			clocks =  <&rpmhcc RPMH_CXO_CLK>;
--
2.17.1

Re: [PATCH v1] arm64: dts: qcom: sc7280: Update lpassaudio clock controller for resets

[Matthias Kaehlcke]

On Tue, Jun 14, 2022 at 09:41:18PM +0530, Taniya Das wrote:
> The lpass audio supports TX/RX/WSA block resets. The LPASS PIL clock
> driver is not supported and mark it disabled. Also to keep consistency
> update lpasscore to lpass_core.

There is a driver for "qcom,sc7280-lpasscc", what does it mean that is
isn't supported?

IIUC one problem is that 'lpasscc@3000000' and 'lpass_aon / clock-controller@3380000'
have overlapping register ranges, so they can't be used together.

You could just say 'Disable the LPASS PIL clock by default, boards
can enable it if needed'.

> Fixes: 9499240d15f2 ("arm64: dts: qcom: sc7280: Add lpasscore & lpassaudio clock controllers")
> Signed-off-by: Taniya Das <quic_tdas@quicinc.com>
> ---
>  arch/arm64/boot/dts/qcom/sc7280.dtsi | 4 +++-
>  1 file changed, 3 insertions(+), 1 deletion(-)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
> index e66fc67de206..180cfd2765b9 100644
> --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
> @@ -2174,6 +2174,7 @@
>  			clocks = <&gcc GCC_CFG_NOC_LPASS_CLK>;
>  			clock-names = "iface";
>  			#clock-cells = <1>;
> +			status = "disabled";
>  		};
> 
>  		lpass_audiocc: clock-controller@3300000 {
> @@ -2185,6 +2186,7 @@
>  			power-domains = <&lpass_aon LPASS_AON_CC_LPASS_AUDIO_HM_GDSC>;
>  			#clock-cells = <1>;
>  			#power-domain-cells = <1>;
> +			#reset-cells = <1>;
>  		};
> 
>  		lpass_aon: clock-controller@3380000 {
> @@ -2198,7 +2200,7 @@
>  			#power-domain-cells = <1>;
>  		};
> 
> -		lpasscore: clock-controller@3900000 {
> +		lpass_core: clock-controller@3900000 {
>  			compatible = "qcom,sc7280-lpasscorecc";
>  			reg = <0 0x03900000 0 0x50000>;
>  			clocks =  <&rpmhcc RPMH_CXO_CLK>;
> --
> 2.17.1
> 

Re: [PATCH v1] arm64: dts: qcom: sc7280: Update lpassaudio clock controller for resets

[Stephen Boyd]

Quoting Matthias Kaehlcke (2022-06-14 09:51:57)
> On Tue, Jun 14, 2022 at 09:41:18PM +0530, Taniya Das wrote:
> > The lpass audio supports TX/RX/WSA block resets. The LPASS PIL clock
> > driver is not supported and mark it disabled. Also to keep consistency
> > update lpasscore to lpass_core.
>
> There is a driver for "qcom,sc7280-lpasscc", what does it mean that is
> isn't supported?
>
> IIUC one problem is that 'lpasscc@3000000' and 'lpass_aon / clock-controller@3380000'
> have overlapping register ranges, so they can't be used together.
>
> You could just say 'Disable the LPASS PIL clock by default, boards
> can enable it if needed'.

For the pinctrl driver we added a "qcom,adsp-bypass-mode" property[1] to
indicate that the ADSP was being bypassed or not. Can we do the same
here and combine the device nodes that have overlapping reg properties?

[1] https://lore.kernel.org/r/1654921357-16400-2-git-send-email-quic_srivasam@quicinc.com

Re: [PATCH v1] arm64: dts: qcom: sc7280: Update lpassaudio clock controller for resets

[Taniya Das]

Hi Stephen,

On 6/15/2022 2:08 AM, Stephen Boyd wrote:
> Quoting Matthias Kaehlcke (2022-06-14 09:51:57)
>> On Tue, Jun 14, 2022 at 09:41:18PM +0530, Taniya Das wrote:
>>> The lpass audio supports TX/RX/WSA block resets. The LPASS PIL clock
>>> driver is not supported and mark it disabled. Also to keep consistency
>>> update lpasscore to lpass_core.
>>
>> There is a driver for "qcom,sc7280-lpasscc", what does it mean that is
>> isn't supported?
>>
>> IIUC one problem is that 'lpasscc@3000000' and 'lpass_aon / clock-controller@3380000'
>> have overlapping register ranges, so they can't be used together.
>>
>> You could just say 'Disable the LPASS PIL clock by default, boards
>> can enable it if needed'.
> 
> For the pinctrl driver we added a "qcom,adsp-bypass-mode" property[1] to
> indicate that the ADSP was being bypassed or not. Can we do the same
> here and combine the device nodes that have overlapping reg properties?
> 
> [1] https://lore.kernel.org/r/1654921357-16400-2-git-send-email-quic_srivasam@quicinc.com

Could we take up as a cleanup and take it forward:
https://lore.kernel.org/lkml/20220614153306.29339-1-quic_tdas@quicinc.com/T/#t

-- 
Thanks & Regards,
Taniya Das.

Re: [PATCH v1] arm64: dts: qcom: sc7280: Update lpassaudio clock controller for resets

[Stephen Boyd]

Quoting Taniya Das (2022-07-07 00:06:59)
>
> Hi Stephen,
>
> On 6/15/2022 2:08 AM, Stephen Boyd wrote:
> > Quoting Matthias Kaehlcke (2022-06-14 09:51:57)
> >> On Tue, Jun 14, 2022 at 09:41:18PM +0530, Taniya Das wrote:
> >>> The lpass audio supports TX/RX/WSA block resets. The LPASS PIL clock
> >>> driver is not supported and mark it disabled. Also to keep consistency
> >>> update lpasscore to lpass_core.
> >>
> >> There is a driver for "qcom,sc7280-lpasscc", what does it mean that is
> >> isn't supported?
> >>
> >> IIUC one problem is that 'lpasscc@3000000' and 'lpass_aon / clock-controller@3380000'
> >> have overlapping register ranges, so they can't be used together.
> >>
> >> You could just say 'Disable the LPASS PIL clock by default, boards
> >> can enable it if needed'.
> >
> > For the pinctrl driver we added a "qcom,adsp-bypass-mode" property[1] to
> > indicate that the ADSP was being bypassed or not. Can we do the same
> > here and combine the device nodes that have overlapping reg properties?
> >
> > [1] https://lore.kernel.org/r/1654921357-16400-2-git-send-email-quic_srivasam@quicinc.com
>
> Could we take up as a cleanup and take it forward:
> https://lore.kernel.org/lkml/20220614153306.29339-1-quic_tdas@quicinc.com/T/#t
>

I don't think so. The binding would need to change.

Re: [PATCH v1] arm64: dts: qcom: sc7280: Update lpassaudio clock controller for resets

[kernel test robot]

Hi Taniya,

Thank you for the patch! Yet something to improve:

[auto build test ERROR on robh/for-next]
[also build test ERROR on linus/master v5.19-rc4 next-20220630]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]

url:    https://github.com/intel-lab-lkp/linux/commits/Taniya-Das/arm64-dts-qcom-sc7280-Update-lpassaudio-clock-controller-for-resets/20220615-001326
base:   https://git.kernel.org/pub/scm/linux/kernel/git/robh/linux.git for-next
config: arm64-defconfig (https://download.01.org/0day-ci/archive/20220701/202207010242.gFemy13K-lkp@intel.com/config)
compiler: aarch64-linux-gcc (GCC) 11.3.0
reproduce (this is a W=1 build):
        wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
        chmod +x ~/bin/make.cross
        # https://github.com/intel-lab-lkp/linux/commit/3156737d3479e335c9ffd0d65e51b1ae6b6d1ec5
        git remote add linux-review https://github.com/intel-lab-lkp/linux
        git fetch --no-tags linux-review Taniya-Das/arm64-dts-qcom-sc7280-Update-lpassaudio-clock-controller-for-resets/20220615-001326
        git checkout 3156737d3479e335c9ffd0d65e51b1ae6b6d1ec5
        # save the config file
        mkdir build_dir && cp config build_dir/.config
        COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-11.3.0 make.cross W=1 O=build_dir ARCH=arm64 SHELL=/bin/bash

If you fix the issue, kindly add following tag where applicable
Reported-by: kernel test robot <lkp@intel.com>

All errors (new ones prefixed by >>):

>> ERROR: Input tree has errors, aborting (use -f to force output)

-- 
0-DAY CI Kernel Test Service
https://01.org/lkp