[v3 1/3] arm64: dts: qcom: sc7280: herobrine: Add pinconf settings for mi2s1

Judy Hsiao
2022-05-25T01:43:39Z

1. Add drive strength property for mi2s1 on sc7280 based platforms.
2. Disable the pull-up for mi2s1 lines.

Signed-off-by: Judy Hsiao <judyhsiao@chromium.org>
---
arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi | 15 +++++++++++++++
1 file changed, 15 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi
index 9cb1bc8ed6b5..f3044b39ba66 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi
@@ -612,6 +612,21 @@ &dp_hot_plug_det {
bias-disable;
};

+&mi2s1_data0 {
+ drive-strength = <6>;
+ bias-disable;
+};
+
+&mi2s1_sclk {
+ drive-strength = <6>;
+ bias-disable;
+};
+
+&mi2s1_ws {
+ drive-strength = <6>;
+ bias-disable;
+};
+
&pcie1_clkreq_n {
bias-pull-up;
drive-strength = <2>;
--
2.36.1.124.g0e6072fb45-goog