[PATCH 5.4 00/71] 5.4.207-rc1 review

[PATCH 5.4 00/71] 5.4.207-rc1 review

[Greg Kroah-Hartman]

This is the start of the stable review cycle for the 5.4.207 release.
There are 71 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Thu, 21 Jul 2022 11:43:40 +0000.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.207-rc1.gz
or in the git tree and branch at:
	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Linux 5.4.207-rc1

Marc Kleine-Budde <mkl@pengutronix.de>
    can: m_can: m_can_tx_handler(): fix use after free of skb

Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
    serial: pl011: UPSTAT_AUTORTS requires .throttle/unthrottle

Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
    serial: stm32: Clear prev values before setting RTS delays

Yi Yang <yiyang13@huawei.com>
    serial: 8250: fix return error code in serial8250_request_std_resource()

Chanho Park <chanho61.park@samsung.com>
    tty: serial: samsung_tty: set dma burst_size to 1

Thinh Nguyen <Thinh.Nguyen@synopsys.com>
    usb: dwc3: gadget: Fix event pending check

Linyu Yuan <quic_linyyuan@quicinc.com>
    usb: typec: add missing uevent when partner support PD

Lucien Buchmann <lucien.buchmann@gmx.net>
    USB: serial: ftdi_sio: add Belimo device ids

Linus Torvalds <torvalds@linux-foundation.org>
    signal handling: don't use BUG_ON() for debugging

Gabriel Fernandez <gabriel.fernandez@foss.st.com>
    ARM: dts: stm32: use the correct clock source for CEC on stm32mp151

Linus Walleij <linus.walleij@linaro.org>
    soc: ixp4xx/npe: Fix unused match warning

Juergen Gross <jgross@suse.com>
    x86: Clear .brk area at early boot

Stafford Horne <shorne@gmail.com>
    irqchip: or1k-pic: Undefine mask_ack for level triggered hardware

Charles Keepax <ckeepax@opensource.cirrus.com>
    ASoC: madera: Fix event generation for rate controls

Charles Keepax <ckeepax@opensource.cirrus.com>
    ASoC: madera: Fix event generation for OUT1 demux

Charles Keepax <ckeepax@opensource.cirrus.com>
    ASoC: cs47l15: Fix event generation for low power mux control

Charles Keepax <ckeepax@opensource.cirrus.com>
    ASoC: wm5110: Fix DRE control

Mark Brown <broonie@kernel.org>
    ASoC: ops: Fix off by one in range control validation

Jianglei Nie <niejianglei2021@163.com>
    net: sfp: fix memory leak in sfp_probe()

Ruozhu Li <liruozhu@huawei.com>
    nvme: fix regression when disconnect a recovering ctrl

Michael Walle <michael@walle.cc>
    NFC: nxp-nci: don't print header length mismatch on i2c error

Hangyu Hua <hbh25y@gmail.com>
    net: tipc: fix possible refcount leak in tipc_sk_create()

Kai-Heng Feng <kai.heng.feng@canonical.com>
    platform/x86: hp-wmi: Ignore Sanitization Mode event

Liang He <windhl@126.com>
    cpufreq: pmac32-cpufreq: Fix refcount leak bug

Florian Westphal <fw@strlen.de>
    netfilter: br_netfilter: do not skip all hooks with 0 priority

Stephan Gerhold <stephan.gerhold@kernkonzept.com>
    virtio_mmio: Restore guest page size on resume

Stephan Gerhold <stephan.gerhold@kernkonzept.com>
    virtio_mmio: Add missing PM calls to freeze/restore

Muchun Song <songmuchun@bytedance.com>
    mm: sysctl: fix missing numa_stat when !CONFIG_HUGETLB_PAGE

Íñigo Huguet <ihuguet@redhat.com>
    sfc: fix kernel panic when creating VF

Andrea Mayer <andrea.mayer@uniroma2.it>
    seg6: bpf: fix skb checksum in bpf_push_seg6_encap()

Andrea Mayer <andrea.mayer@uniroma2.it>
    seg6: fix skb checksum in SRv6 End.B6 and End.B6.Encaps behaviors

Andrea Mayer <andrea.mayer@uniroma2.it>
    seg6: fix skb checksum evaluation in SRH encapsulation/insertion

Íñigo Huguet <ihuguet@redhat.com>
    sfc: fix use after free when disabling sriov

Liang He <windhl@126.com>
    net: ftgmac100: Hold reference returned by of_get_child_by_name()

Kuniyuki Iwashima <kuniyu@amazon.com>
    ipv4: Fix data-races around sysctl_ip_dynaddr.

Kuniyuki Iwashima <kuniyu@amazon.com>
    raw: Fix a data-race around sysctl_raw_l3mdev_accept.

Kuniyuki Iwashima <kuniyu@amazon.com>
    icmp: Fix a data-race around sysctl_icmp_ratemask.

Kuniyuki Iwashima <kuniyu@amazon.com>
    icmp: Fix a data-race around sysctl_icmp_ratelimit.

Chris Wilson <chris.p.wilson@intel.com>
    drm/i915/gt: Serialize TLB invalidates with GT resets

Michal Suchanek <msuchanek@suse.de>
    ARM: dts: sunxi: Fix SPI NOR campatible on Orange Pi Zero

Ryan Wanner <Ryan.Wanner@microchip.com>
    ARM: dts: at91: sama5d2: Fix typo in i2s1 node

Kuniyuki Iwashima <kuniyu@amazon.com>
    ipv4: Fix a data-race around sysctl_fib_sync_mem.

Kuniyuki Iwashima <kuniyu@amazon.com>
    icmp: Fix data-races around sysctl.

Kuniyuki Iwashima <kuniyu@amazon.com>
    cipso: Fix data-races around sysctl.

Kuniyuki Iwashima <kuniyu@amazon.com>
    net: Fix data-races around sysctl_mem.

Kuniyuki Iwashima <kuniyu@amazon.com>
    inetpeer: Fix data-races around sysctl.

Jon Hunter <jonathanh@nvidia.com>
    net: stmmac: dwc-qos: Disable split header for Tegra194

Francesco Dolcini <francesco.dolcini@toradex.com>
    ASoC: sgtl5000: Fix noise on shutdown/remove

Huaxin Lu <luhuaxin1@huawei.com>
    ima: Fix a potential integer overflow in ima_appraise_measurement

Hangyu Hua <hbh25y@gmail.com>
    drm/i915: fix a possible refcount leak in intel_dp_add_mst_connector()

Zhen Lei <thunder.leizhen@huawei.com>
    ARM: 9210/1: Mark the FDT_FIXED sections as shareable

Ard Biesheuvel <ardb@kernel.org>
    ARM: 9209/1: Spectre-BHB: avoid pr_info() every time a CPU comes out of idle

Kris Bahnsen <kris@embeddedTS.com>
    ARM: dts: imx6qdl-ts7970: Fix ngpio typo and count

Baokun Li <libaokun1@huawei.com>
    ext4: fix race condition between ext4_write and ext4_convert_inline_data

Daniel Bristot de Oliveira <bristot@redhat.com>
    sched/rt: Disable RT_RUNTIME_SHARE by default

Xiu Jianfeng <xiujianfeng@huawei.com>
    Revert "evm: Fix memleak in init_desc"

Ryusuke Konishi <konishi.ryusuke@gmail.com>
    nilfs2: fix incorrect masking of permission flags for symlinks

Dmitry Osipenko <dmitry.osipenko@collabora.com>
    drm/panfrost: Fix shrinker list corruption by madvise IOCTL

Tejun Heo <tj@kernel.org>
    cgroup: Use separate src/dst nodes when preloading css_sets for migration

Felix Fietkau <nbd@nbd.name>
    wifi: mac80211: fix queue selection for mesh/OCB interfaces

Ard Biesheuvel <ardb@kernel.org>
    ARM: 9214/1: alignment: advance IT state after emulating Thumb instruction

Dmitry Osipenko <dmitry.osipenko@collabora.com>
    ARM: 9213/1: Print message about disabled Spectre workarounds only once

Nicolas Dichtel <nicolas.dichtel@6wind.com>
    ip: fix dflt addr selection for connected nexthop

Steven Rostedt (Google) <rostedt@goodmis.org>
    net: sock: tracing: Fix sock_exceed_buf_limit not to dereference stale pointer

Zheng Yejian <zhengyejian1@huawei.com>
    tracing/histograms: Fix memory leak problem

Juergen Gross <jgross@suse.com>
    xen/netback: avoid entering xenvif_rx_next_skb() with an empty rx queue

Meng Tang <tangmeng@uniontech.com>
    ALSA: hda/realtek - Enable the headset-mic on a Xiaomi's laptop

Meng Tang <tangmeng@uniontech.com>
    ALSA: hda/realtek - Fix headset mic problem for a HP machine with alc221

Meng Tang <tangmeng@uniontech.com>
    ALSA: hda/realtek - Fix headset mic problem for a HP machine with alc671

Meng Tang <tangmeng@uniontech.com>
    ALSA: hda/conexant: Apply quirk for another HP ProDesk 600 G3 model

Meng Tang <tangmeng@uniontech.com>
    ALSA: hda - Add fixup for Dell Latitidue E5430


-------------

Diffstat:

 Documentation/networking/ip-sysctl.txt             |  4 +--
 Makefile                                           |  4 +--
 arch/arm/boot/dts/imx6qdl-ts7970.dtsi              |  2 +-
 arch/arm/boot/dts/sama5d2.dtsi                     |  2 +-
 arch/arm/boot/dts/stm32mp157c.dtsi                 |  2 +-
 arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts  |  2 +-
 arch/arm/include/asm/mach/map.h                    |  1 +
 arch/arm/include/asm/ptrace.h                      | 26 +++++++++++++++
 arch/arm/mm/alignment.c                            |  3 ++
 arch/arm/mm/mmu.c                                  | 15 ++++++++-
 arch/arm/mm/proc-v7-bugs.c                         |  9 +++---
 arch/arm/probes/decode.h                           | 26 +--------------
 arch/x86/kernel/head64.c                           |  2 ++
 drivers/cpufreq/pmac32-cpufreq.c                   |  4 +++
 drivers/gpu/drm/i915/display/intel_dp_mst.c        |  1 +
 drivers/gpu/drm/i915/gt/intel_gt.c                 | 15 ++++++++-
 drivers/gpu/drm/panfrost/panfrost_drv.c            |  4 +--
 drivers/irqchip/irq-or1k-pic.c                     |  1 -
 drivers/net/can/m_can/m_can.c                      |  5 +--
 drivers/net/ethernet/faraday/ftgmac100.c           | 15 ++++++++-
 drivers/net/ethernet/sfc/ef10.c                    |  3 ++
 drivers/net/ethernet/sfc/ef10_sriov.c              | 10 ++++--
 .../ethernet/stmicro/stmmac/dwmac-dwc-qos-eth.c    |  1 +
 drivers/net/phy/sfp.c                              |  2 +-
 drivers/net/xen-netback/rx.c                       |  1 +
 drivers/nfc/nxp-nci/i2c.c                          |  8 +++--
 drivers/nvme/host/core.c                           |  2 ++
 drivers/nvme/host/nvme.h                           |  1 +
 drivers/nvme/host/rdma.c                           | 12 +++++--
 drivers/nvme/host/tcp.c                            | 10 ++++--
 drivers/platform/x86/hp-wmi.c                      |  3 ++
 drivers/soc/ixp4xx/ixp4xx-npe.c                    |  2 +-
 drivers/tty/serial/8250/8250_port.c                |  4 ++-
 drivers/tty/serial/amba-pl011.c                    | 23 ++++++++++++--
 drivers/tty/serial/samsung.c                       |  5 ++-
 drivers/tty/serial/stm32-usart.c                   |  2 ++
 drivers/usb/dwc3/gadget.c                          |  4 ++-
 drivers/usb/serial/ftdi_sio.c                      |  3 ++
 drivers/usb/serial/ftdi_sio_ids.h                  |  6 ++++
 drivers/usb/typec/class.c                          |  1 +
 drivers/virtio/virtio_mmio.c                       | 26 +++++++++++++++
 fs/ext4/extents.c                                  |  8 +++--
 fs/ext4/inode.c                                    |  9 ------
 fs/nilfs2/nilfs.h                                  |  3 ++
 include/linux/cgroup-defs.h                        |  3 +-
 include/net/raw.h                                  |  2 +-
 include/net/sock.h                                 |  2 +-
 include/trace/events/sock.h                        |  6 ++--
 kernel/cgroup/cgroup.c                             | 37 ++++++++++++++--------
 kernel/sched/features.h                            |  2 +-
 kernel/signal.c                                    |  8 ++---
 kernel/sysctl.c                                    | 20 ++++++------
 kernel/trace/trace_events_hist.c                   |  2 ++
 net/bridge/br_netfilter_hooks.c                    | 21 ++++++++++--
 net/core/filter.c                                  |  1 -
 net/ipv4/af_inet.c                                 |  4 +--
 net/ipv4/cipso_ipv4.c                              | 12 ++++---
 net/ipv4/fib_semantics.c                           |  2 +-
 net/ipv4/fib_trie.c                                |  2 +-
 net/ipv4/icmp.c                                    | 10 +++---
 net/ipv4/inetpeer.c                                | 12 ++++---
 net/ipv6/seg6_iptunnel.c                           |  5 ++-
 net/ipv6/seg6_local.c                              |  2 --
 net/mac80211/wme.c                                 |  4 +--
 net/tipc/socket.c                                  |  1 +
 security/integrity/evm/evm_crypto.c                |  7 ++--
 security/integrity/ima/ima_appraise.c              |  3 +-
 sound/pci/hda/patch_conexant.c                     |  1 +
 sound/pci/hda/patch_realtek.c                      | 15 +++++++++
 sound/soc/codecs/cs47l15.c                         |  5 ++-
 sound/soc/codecs/madera.c                          | 14 +++++---
 sound/soc/codecs/sgtl5000.c                        |  9 ++++++
 sound/soc/codecs/sgtl5000.h                        |  1 +
 sound/soc/codecs/wm5110.c                          |  8 +++--
 sound/soc/soc-ops.c                                |  4 +--
 75 files changed, 365 insertions(+), 152 deletions(-)

[PATCH 5.4 01/71] ALSA: hda - Add fixup for Dell Latitidue E5430

[Greg Kroah-Hartman]

From: Meng Tang <tangmeng@uniontech.com>

commit 841bdf85c226803a78a9319af9b2caa9bf3e2eda upstream.

Another Dell model, another fixup entry: Latitude E5430 needs the same
fixup as other Latitude E series as workaround for noise problems.

Signed-off-by: Meng Tang <tangmeng@uniontech.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220712060005.20176-1-tangmeng@uniontech.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/pci/hda/patch_realtek.c |    1 +
 1 file changed, 1 insertion(+)

--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -8056,6 +8056,7 @@ static const struct snd_pci_quirk alc269
 	SND_PCI_QUIRK(0x1025, 0x142b, "Acer Swift SF314-42", ALC255_FIXUP_ACER_MIC_NO_PRESENCE),
 	SND_PCI_QUIRK(0x1025, 0x1430, "Acer TravelMate B311R-31", ALC256_FIXUP_ACER_MIC_NO_PRESENCE),
 	SND_PCI_QUIRK(0x1028, 0x0470, "Dell M101z", ALC269_FIXUP_DELL_M101Z),
+	SND_PCI_QUIRK(0x1028, 0x053c, "Dell Latitude E5430", ALC292_FIXUP_DELL_E7X),
 	SND_PCI_QUIRK(0x1028, 0x054b, "Dell XPS one 2710", ALC275_FIXUP_DELL_XPS),
 	SND_PCI_QUIRK(0x1028, 0x05bd, "Dell Latitude E6440", ALC292_FIXUP_DELL_E7X),
 	SND_PCI_QUIRK(0x1028, 0x05be, "Dell Latitude E6540", ALC292_FIXUP_DELL_E7X),

[PATCH 5.4 02/71] ALSA: hda/conexant: Apply quirk for another HP ProDesk 600 G3 model

[Greg Kroah-Hartman]

From: Meng Tang <tangmeng@uniontech.com>

commit d16d69bf5a25d91c6d8f3e29711be12551bf56cd upstream.

There is another HP ProDesk 600 G3 model with the PCI SSID 103c:82b4
that requires the quirk HP_MIC_NO_PRESENCE. Add the corresponding
entry to the quirk table.

Signed-off-by: Meng Tang <tangmeng@uniontech.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220711101744.25189-1-tangmeng@uniontech.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/pci/hda/patch_conexant.c |    1 +
 1 file changed, 1 insertion(+)

--- a/sound/pci/hda/patch_conexant.c
+++ b/sound/pci/hda/patch_conexant.c
@@ -905,6 +905,7 @@ static const struct snd_pci_quirk cxt506
 	SND_PCI_QUIRK(0x103c, 0x828c, "HP EliteBook 840 G4", CXT_FIXUP_HP_DOCK),
 	SND_PCI_QUIRK(0x103c, 0x8299, "HP 800 G3 SFF", CXT_FIXUP_HP_MIC_NO_PRESENCE),
 	SND_PCI_QUIRK(0x103c, 0x829a, "HP 800 G3 DM", CXT_FIXUP_HP_MIC_NO_PRESENCE),
+	SND_PCI_QUIRK(0x103c, 0x82b4, "HP ProDesk 600 G3", CXT_FIXUP_HP_MIC_NO_PRESENCE),
 	SND_PCI_QUIRK(0x103c, 0x836e, "HP ProBook 455 G5", CXT_FIXUP_MUTE_LED_GPIO),
 	SND_PCI_QUIRK(0x103c, 0x837f, "HP ProBook 470 G5", CXT_FIXUP_MUTE_LED_GPIO),
 	SND_PCI_QUIRK(0x103c, 0x83b2, "HP EliteBook 840 G5", CXT_FIXUP_HP_DOCK),

[PATCH 5.4 03/71] ALSA: hda/realtek - Fix headset mic problem for a HP machine with alc671

[Greg Kroah-Hartman]

From: Meng Tang <tangmeng@uniontech.com>

commit dbe75d314748e08fc6e4576d153d8a69621ee5ca upstream.

On a HP 288 Pro G6, the front mic could not be detected.In order to
get it working, the pin configuration needs to be set correctly, and
the ALC671_FIXUP_HP_HEADSET_MIC2 fixup needs to be applied.

Signed-off-by: Meng Tang <tangmeng@uniontech.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220712092222.21738-1-tangmeng@uniontech.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/pci/hda/patch_realtek.c |    1 +
 1 file changed, 1 insertion(+)

--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -10261,6 +10261,7 @@ static const struct snd_pci_quirk alc662
 	SND_PCI_QUIRK(0x103c, 0x1632, "HP RP5800", ALC662_FIXUP_HP_RP5800),
 	SND_PCI_QUIRK(0x103c, 0x8719, "HP", ALC897_FIXUP_HP_HSMIC_VERB),
 	SND_PCI_QUIRK(0x103c, 0x873e, "HP", ALC671_FIXUP_HP_HEADSET_MIC2),
+	SND_PCI_QUIRK(0x103c, 0x877e, "HP 288 Pro G6", ALC671_FIXUP_HP_HEADSET_MIC2),
 	SND_PCI_QUIRK(0x103c, 0x885f, "HP 288 Pro G8", ALC671_FIXUP_HP_HEADSET_MIC2),
 	SND_PCI_QUIRK(0x1043, 0x1080, "Asus UX501VW", ALC668_FIXUP_HEADSET_MODE),
 	SND_PCI_QUIRK(0x1043, 0x11cd, "Asus N550", ALC662_FIXUP_ASUS_Nx50),

[PATCH 5.4 04/71] ALSA: hda/realtek - Fix headset mic problem for a HP machine with alc221

[Greg Kroah-Hartman]

From: Meng Tang <tangmeng@uniontech.com>

commit 4ba5c853d7945b3855c3dcb293f7f9f019db641e upstream.

On a HP 288 Pro G2 MT (X9W02AV), the front mic could not be detected.
In order to get it working, the pin configuration needs to be set
correctly, and the ALC221_FIXUP_HP_288PRO_MIC_NO_PRESENCE fixup needs
to be applied.

Signed-off-by: Meng Tang <tangmeng@uniontech.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220713063332.30095-1-tangmeng@uniontech.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/pci/hda/patch_realtek.c |   12 ++++++++++++
 1 file changed, 12 insertions(+)

--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -6427,6 +6427,7 @@ enum {
 	ALC298_FIXUP_LENOVO_SPK_VOLUME,
 	ALC256_FIXUP_DELL_INSPIRON_7559_SUBWOOFER,
 	ALC269_FIXUP_ATIV_BOOK_8,
+	ALC221_FIXUP_HP_288PRO_MIC_NO_PRESENCE,
 	ALC221_FIXUP_HP_MIC_NO_PRESENCE,
 	ALC256_FIXUP_ASUS_HEADSET_MODE,
 	ALC256_FIXUP_ASUS_MIC,
@@ -7305,6 +7306,16 @@ static const struct hda_fixup alc269_fix
 		.chained = true,
 		.chain_id = ALC269_FIXUP_NO_SHUTUP
 	},
+	[ALC221_FIXUP_HP_288PRO_MIC_NO_PRESENCE] = {
+		.type = HDA_FIXUP_PINS,
+		.v.pins = (const struct hda_pintbl[]) {
+			{ 0x19, 0x01a1913c }, /* use as headset mic, without its own jack detect */
+			{ 0x1a, 0x01813030 }, /* use as headphone mic, without its own jack detect */
+			{ }
+		},
+		.chained = true,
+		.chain_id = ALC269_FIXUP_HEADSET_MODE
+	},
 	[ALC221_FIXUP_HP_MIC_NO_PRESENCE] = {
 		.type = HDA_FIXUP_PINS,
 		.v.pins = (const struct hda_pintbl[]) {
@@ -8163,6 +8174,7 @@ static const struct snd_pci_quirk alc269
 	SND_PCI_QUIRK(0x103c, 0x2335, "HP", ALC269_FIXUP_HP_MUTE_LED_MIC1),
 	SND_PCI_QUIRK(0x103c, 0x2336, "HP", ALC269_FIXUP_HP_MUTE_LED_MIC1),
 	SND_PCI_QUIRK(0x103c, 0x2337, "HP", ALC269_FIXUP_HP_MUTE_LED_MIC1),
+	SND_PCI_QUIRK(0x103c, 0x2b5e, "HP 288 Pro G2 MT", ALC221_FIXUP_HP_288PRO_MIC_NO_PRESENCE),
 	SND_PCI_QUIRK(0x103c, 0x802e, "HP Z240 SFF", ALC221_FIXUP_HP_MIC_NO_PRESENCE),
 	SND_PCI_QUIRK(0x103c, 0x802f, "HP Z240", ALC221_FIXUP_HP_MIC_NO_PRESENCE),
 	SND_PCI_QUIRK(0x103c, 0x820d, "HP Pavilion 15", ALC269_FIXUP_HP_MUTE_LED_MIC3),

[PATCH 5.4 05/71] ALSA: hda/realtek - Enable the headset-mic on a Xiaomis laptop

[Greg Kroah-Hartman]

From: Meng Tang <tangmeng@uniontech.com>

commit 9b043a8f386485c74c0f8eea2c287d5bdbdf3279 upstream.

The headset on this machine is not defined, after applying the quirk
ALC256_FIXUP_ASUS_HEADSET_MIC, the headset-mic works well

Signed-off-by: Meng Tang <tangmeng@uniontech.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220713094133.9894-1-tangmeng@uniontech.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/pci/hda/patch_realtek.c |    1 +
 1 file changed, 1 insertion(+)

--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -8423,6 +8423,7 @@ static const struct snd_pci_quirk alc269
 	SND_PCI_QUIRK(0x1d72, 0x1602, "RedmiBook", ALC255_FIXUP_XIAOMI_HEADSET_MIC),
 	SND_PCI_QUIRK(0x1d72, 0x1701, "XiaomiNotebook Pro", ALC298_FIXUP_DELL1_MIC_NO_PRESENCE),
 	SND_PCI_QUIRK(0x1d72, 0x1901, "RedmiBook 14", ALC256_FIXUP_ASUS_HEADSET_MIC),
+	SND_PCI_QUIRK(0x1d72, 0x1945, "Redmi G", ALC256_FIXUP_ASUS_HEADSET_MIC),
 	SND_PCI_QUIRK(0x1d72, 0x1947, "RedmiBook Air", ALC255_FIXUP_XIAOMI_HEADSET_MIC),
 	SND_PCI_QUIRK(0x8086, 0x2074, "Intel NUC 8", ALC233_FIXUP_INTEL_NUC8_DMIC),
 	SND_PCI_QUIRK(0x8086, 0x2080, "Intel NUC 8 Rugged", ALC256_FIXUP_INTEL_NUC8_RUGGED),

[PATCH 5.4 06/71] xen/netback: avoid entering xenvif_rx_next_skb() with an empty rx queue

[Greg Kroah-Hartman]

From: Juergen Gross <jgross@suse.com>

commit 94e8100678889ab428e68acadf042de723f094b9 upstream.

xenvif_rx_next_skb() is expecting the rx queue not being empty, but
in case the loop in xenvif_rx_action() is doing multiple iterations,
the availability of another skb in the rx queue is not being checked.

This can lead to crashes:

[40072.537261] BUG: unable to handle kernel NULL pointer dereference at 0000000000000080
[40072.537407] IP: xenvif_rx_skb+0x23/0x590 [xen_netback]
[40072.537534] PGD 0 P4D 0
[40072.537644] Oops: 0000 [#1] SMP NOPTI
[40072.537749] CPU: 0 PID: 12505 Comm: v1-c40247-q2-gu Not tainted 4.12.14-122.121-default #1 SLE12-SP5
[40072.537867] Hardware name: HP ProLiant DL580 Gen9/ProLiant DL580 Gen9, BIOS U17 11/23/2021
[40072.537999] task: ffff880433b38100 task.stack: ffffc90043d40000
[40072.538112] RIP: e030:xenvif_rx_skb+0x23/0x590 [xen_netback]
[40072.538217] RSP: e02b:ffffc90043d43de0 EFLAGS: 00010246
[40072.538319] RAX: 0000000000000000 RBX: ffffc90043cd7cd0 RCX: 00000000000000f7
[40072.538430] RDX: 0000000000000000 RSI: 0000000000000006 RDI: ffffc90043d43df8
[40072.538531] RBP: 000000000000003f R08: 000077ff80000000 R09: 0000000000000008
[40072.538644] R10: 0000000000007ff0 R11: 00000000000008f6 R12: ffffc90043ce2708
[40072.538745] R13: 0000000000000000 R14: ffffc90043d43ed0 R15: ffff88043ea748c0
[40072.538861] FS: 0000000000000000(0000) GS:ffff880484600000(0000) knlGS:0000000000000000
[40072.538988] CS: e033 DS: 0000 ES: 0000 CR0: 0000000080050033
[40072.539088] CR2: 0000000000000080 CR3: 0000000407ac8000 CR4: 0000000000040660
[40072.539211] Call Trace:
[40072.539319] xenvif_rx_action+0x71/0x90 [xen_netback]
[40072.539429] xenvif_kthread_guest_rx+0x14a/0x29c [xen_netback]

Fix that by stopping the loop in case the rx queue becomes empty.

Cc: stable@vger.kernel.org
Fixes: 98f6d57ced73 ("xen-netback: process guest rx packets in batches")
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Link: https://lore.kernel.org/r/20220713135322.19616-1-jgross@suse.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/xen-netback/rx.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/net/xen-netback/rx.c
+++ b/drivers/net/xen-netback/rx.c
@@ -482,6 +482,7 @@ void xenvif_rx_action(struct xenvif_queu
 	queue->rx_copy.completed = &completed_skbs;
 
 	while (xenvif_rx_ring_slots_available(queue) &&
+	       !skb_queue_empty(&queue->rx_queue) &&
 	       work_done < RX_BATCH_SIZE) {
 		xenvif_rx_skb(queue);
 		work_done++;

[PATCH 5.4 07/71] tracing/histograms: Fix memory leak problem

[Greg Kroah-Hartman]

From: Zheng Yejian <zhengyejian1@huawei.com>

commit 7edc3945bdce9c39198a10d6129377a5c53559c2 upstream.

This reverts commit 46bbe5c671e06f070428b9be142cc4ee5cedebac.

As commit 46bbe5c671e0 ("tracing: fix double free") said, the
"double free" problem reported by clang static analyzer is:
  > In parse_var_defs() if there is a problem allocating
  > var_defs.expr, the earlier var_defs.name is freed.
  > This free is duplicated by free_var_defs() which frees
  > the rest of the list.

However, if there is a problem allocating N-th var_defs.expr:
  + in parse_var_defs(), the freed 'earlier var_defs.name' is
    actually the N-th var_defs.name;
  + then in free_var_defs(), the names from 0th to (N-1)-th are freed;

                        IF ALLOCATING PROBLEM HAPPENED HERE!!! -+
                                                                 \
                                                                  |
          0th           1th                 (N-1)-th      N-th    V
          +-------------+-------------+-----+-------------+-----------
var_defs: | name | expr | name | expr | ... | name | expr | name | ///
          +-------------+-------------+-----+-------------+-----------

These two frees don't act on same name, so there was no "double free"
problem before. Conversely, after that commit, we get a "memory leak"
problem because the above "N-th var_defs.name" is not freed.

If enable CONFIG_DEBUG_KMEMLEAK and inject a fault at where the N-th
var_defs.expr allocated, then execute on shell like:
  $ echo 'hist:key=call_site:val=$v1,$v2:v1=bytes_req,v2=bytes_alloc' > \
/sys/kernel/debug/tracing/events/kmem/kmalloc/trigger

Then kmemleak reports:
  unreferenced object 0xffff8fb100ef3518 (size 8):
    comm "bash", pid 196, jiffies 4295681690 (age 28.538s)
    hex dump (first 8 bytes):
      76 31 00 00 b1 8f ff ff                          v1......
    backtrace:
      [<0000000038fe4895>] kstrdup+0x2d/0x60
      [<00000000c99c049a>] event_hist_trigger_parse+0x206f/0x20e0
      [<00000000ae70d2cc>] trigger_process_regex+0xc0/0x110
      [<0000000066737a4c>] event_trigger_write+0x75/0xd0
      [<000000007341e40c>] vfs_write+0xbb/0x2a0
      [<0000000087fde4c2>] ksys_write+0x59/0xd0
      [<00000000581e9cdf>] do_syscall_64+0x3a/0x80
      [<00000000cf3b065c>] entry_SYSCALL_64_after_hwframe+0x46/0xb0

Link: https://lkml.kernel.org/r/20220711014731.69520-1-zhengyejian1@huawei.com

Cc: stable@vger.kernel.org
Fixes: 46bbe5c671e0 ("tracing: fix double free")
Reported-by: Hulk Robot <hulkci@huawei.com>
Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Reviewed-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Zheng Yejian <zhengyejian1@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 kernel/trace/trace_events_hist.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/kernel/trace/trace_events_hist.c
+++ b/kernel/trace/trace_events_hist.c
@@ -4832,6 +4832,8 @@ static int parse_var_defs(struct hist_tr
 
 			s = kstrdup(field_str, GFP_KERNEL);
 			if (!s) {
+				kfree(hist_data->attrs->var_defs.name[n_vars]);
+				hist_data->attrs->var_defs.name[n_vars] = NULL;
 				ret = -ENOMEM;
 				goto free;
 			}

[PATCH 5.4 08/71] net: sock: tracing: Fix sock_exceed_buf_limit not to dereference stale pointer

[Greg Kroah-Hartman]

From: Steven Rostedt (Google) <rostedt@goodmis.org>

commit 820b8963adaea34a87abbecb906d1f54c0aabfb7 upstream.

The trace event sock_exceed_buf_limit saves the prot->sysctl_mem pointer
and then dereferences it in the TP_printk() portion. This is unsafe as the
TP_printk() portion is executed at the time the buffer is read. That is,
it can be seconds, minutes, days, months, even years later. If the proto
is freed, then this dereference will can also lead to a kernel crash.

Instead, save the sysctl_mem array into the ring buffer and have the
TP_printk() reference that instead. This is the proper and safe way to
read pointers in trace events.

Link: https://lore.kernel.org/all/20220706052130.16368-12-kuniyu@amazon.com/

Cc: stable@vger.kernel.org
Fixes: 3847ce32aea9f ("core: add tracepoints for queueing skb to rcvbuf")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 include/trace/events/sock.h |    6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

--- a/include/trace/events/sock.h
+++ b/include/trace/events/sock.h
@@ -97,7 +97,7 @@ TRACE_EVENT(sock_exceed_buf_limit,
 
 	TP_STRUCT__entry(
 		__array(char, name, 32)
-		__field(long *, sysctl_mem)
+		__array(long, sysctl_mem, 3)
 		__field(long, allocated)
 		__field(int, sysctl_rmem)
 		__field(int, rmem_alloc)
@@ -109,7 +109,9 @@ TRACE_EVENT(sock_exceed_buf_limit,
 
 	TP_fast_assign(
 		strncpy(__entry->name, prot->name, 32);
-		__entry->sysctl_mem = prot->sysctl_mem;
+		__entry->sysctl_mem[0] = READ_ONCE(prot->sysctl_mem[0]);
+		__entry->sysctl_mem[1] = READ_ONCE(prot->sysctl_mem[1]);
+		__entry->sysctl_mem[2] = READ_ONCE(prot->sysctl_mem[2]);
 		__entry->allocated = allocated;
 		__entry->sysctl_rmem = sk_get_rmem0(sk, prot);
 		__entry->rmem_alloc = atomic_read(&sk->sk_rmem_alloc);

[PATCH 5.4 09/71] ip: fix dflt addr selection for connected nexthop

[Greg Kroah-Hartman]

From: Nicolas Dichtel <nicolas.dichtel@6wind.com>

commit 747c14307214b55dbd8250e1ab44cad8305756f1 upstream.

When a nexthop is added, without a gw address, the default scope was set
to 'host'. Thus, when a source address is selected, 127.0.0.1 may be chosen
but rejected when the route is used.

When using a route without a nexthop id, the scope can be configured in the
route, thus the problem doesn't exist.

To explain more deeply: when a user creates a nexthop, it cannot specify
the scope. To create it, the function nh_create_ipv4() calls fib_check_nh()
with scope set to 0. fib_check_nh() calls fib_check_nh_nongw() wich was
setting scope to 'host'. Then, nh_create_ipv4() calls
fib_info_update_nhc_saddr() with scope set to 'host'. The src addr is
chosen before the route is inserted.

When a 'standard' route (ie without a reference to a nexthop) is added,
fib_create_info() calls fib_info_update_nhc_saddr() with the scope set by
the user. iproute2 set the scope to 'link' by default.

Here is a way to reproduce the problem:
ip netns add foo
ip -n foo link set lo up
ip netns add bar
ip -n bar link set lo up
sleep 1

ip -n foo link add name eth0 type dummy
ip -n foo link set eth0 up
ip -n foo address add 192.168.0.1/24 dev eth0

ip -n foo link add name veth0 type veth peer name veth1 netns bar
ip -n foo link set veth0 up
ip -n bar link set veth1 up

ip -n bar address add 192.168.1.1/32 dev veth1
ip -n bar route add default dev veth1

ip -n foo nexthop add id 1 dev veth0
ip -n foo route add 192.168.1.1 nhid 1

Try to get/use the route:
> $ ip -n foo route get 192.168.1.1
> RTNETLINK answers: Invalid argument
> $ ip netns exec foo ping -c1 192.168.1.1
> ping: connect: Invalid argument

Try without nexthop group (iproute2 sets scope to 'link' by dflt):
ip -n foo route del 192.168.1.1
ip -n foo route add 192.168.1.1 dev veth0

Try to get/use the route:
> $ ip -n foo route get 192.168.1.1
> 192.168.1.1 dev veth0 src 192.168.0.1 uid 0
>     cache
> $ ip netns exec foo ping -c1 192.168.1.1
> PING 192.168.1.1 (192.168.1.1) 56(84) bytes of data.
> 64 bytes from 192.168.1.1: icmp_seq=1 ttl=64 time=0.039 ms
>
> --- 192.168.1.1 ping statistics ---
> 1 packets transmitted, 1 received, 0% packet loss, time 0ms
> rtt min/avg/max/mdev = 0.039/0.039/0.039/0.000 ms

CC: stable@vger.kernel.org
Fixes: 597cfe4fc339 ("nexthop: Add support for IPv4 nexthops")
Reported-by: Edwin Brossette <edwin.brossette@6wind.com>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Link: https://lore.kernel.org/r/20220713114853.29406-1-nicolas.dichtel@6wind.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ipv4/fib_semantics.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/net/ipv4/fib_semantics.c
+++ b/net/ipv4/fib_semantics.c
@@ -1217,7 +1217,7 @@ static int fib_check_nh_nongw(struct net
 
 	nh->fib_nh_dev = in_dev->dev;
 	dev_hold(nh->fib_nh_dev);
-	nh->fib_nh_scope = RT_SCOPE_HOST;
+	nh->fib_nh_scope = RT_SCOPE_LINK;
 	if (!netif_carrier_ok(nh->fib_nh_dev))
 		nh->fib_nh_flags |= RTNH_F_LINKDOWN;
 	err = 0;

[PATCH 5.4 10/71] ARM: 9213/1: Print message about disabled Spectre workarounds only once

[Greg Kroah-Hartman]

From: Dmitry Osipenko <dmitry.osipenko@collabora.com>

commit e4ced82deb5fb17222fb82e092c3f8311955b585 upstream.

Print the message about disabled Spectre workarounds only once. The
message is printed each time CPU goes out from idling state on NVIDIA
Tegra boards, causing storm in KMSG that makes system unusable.

Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/arm/mm/proc-v7-bugs.c |    3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

--- a/arch/arm/mm/proc-v7-bugs.c
+++ b/arch/arm/mm/proc-v7-bugs.c
@@ -109,8 +109,7 @@ static unsigned int spectre_v2_install_w
 #else
 static unsigned int spectre_v2_install_workaround(unsigned int method)
 {
-	pr_info("CPU%u: Spectre V2: workarounds disabled by configuration\n",
-		smp_processor_id());
+	pr_info_once("Spectre V2: workarounds disabled by configuration\n");
 
 	return SPECTRE_VULNERABLE;
 }

[PATCH 5.4 11/71] ARM: 9214/1: alignment: advance IT state after emulating Thumb instruction

[Greg Kroah-Hartman]

From: Ard Biesheuvel <ardb@kernel.org>

commit e5c46fde75e43c15a29b40e5fc5641727f97ae47 upstream.

After emulating a misaligned load or store issued in Thumb mode, we have
to advance the IT state by hand, or it will get out of sync with the
actual instruction stream, which means we'll end up applying the wrong
condition code to subsequent instructions. This might corrupt the
program state rather catastrophically.

So borrow the it_advance() helper from the probing code, and use it on
CPSR if the emulated instruction is Thumb.

Cc: <stable@vger.kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/arm/include/asm/ptrace.h |   26 ++++++++++++++++++++++++++
 arch/arm/mm/alignment.c       |    3 +++
 arch/arm/probes/decode.h      |   26 +-------------------------
 3 files changed, 30 insertions(+), 25 deletions(-)

--- a/arch/arm/include/asm/ptrace.h
+++ b/arch/arm/include/asm/ptrace.h
@@ -164,5 +164,31 @@ static inline unsigned long user_stack_p
 		((current_stack_pointer | (THREAD_SIZE - 1)) - 7) - 1;	\
 })
 
+
+/*
+ * Update ITSTATE after normal execution of an IT block instruction.
+ *
+ * The 8 IT state bits are split into two parts in CPSR:
+ *	ITSTATE<1:0> are in CPSR<26:25>
+ *	ITSTATE<7:2> are in CPSR<15:10>
+ */
+static inline unsigned long it_advance(unsigned long cpsr)
+{
+	if ((cpsr & 0x06000400) == 0) {
+		/* ITSTATE<2:0> == 0 means end of IT block, so clear IT state */
+		cpsr &= ~PSR_IT_MASK;
+	} else {
+		/* We need to shift left ITSTATE<4:0> */
+		const unsigned long mask = 0x06001c00;  /* Mask ITSTATE<4:0> */
+		unsigned long it = cpsr & mask;
+		it <<= 1;
+		it |= it >> (27 - 10);  /* Carry ITSTATE<2> to correct place */
+		it &= mask;
+		cpsr &= ~mask;
+		cpsr |= it;
+	}
+	return cpsr;
+}
+
 #endif /* __ASSEMBLY__ */
 #endif
--- a/arch/arm/mm/alignment.c
+++ b/arch/arm/mm/alignment.c
@@ -935,6 +935,9 @@ do_alignment(unsigned long addr, unsigne
 	if (type == TYPE_LDST)
 		do_alignment_finish_ldst(addr, instr, regs, offset);
 
+	if (thumb_mode(regs))
+		regs->ARM_cpsr = it_advance(regs->ARM_cpsr);
+
 	return 0;
 
  bad_or_fault:
--- a/arch/arm/probes/decode.h
+++ b/arch/arm/probes/decode.h
@@ -14,6 +14,7 @@
 #include <linux/types.h>
 #include <linux/stddef.h>
 #include <asm/probes.h>
+#include <asm/ptrace.h>
 #include <asm/kprobes.h>
 
 void __init arm_probes_decode_init(void);
@@ -35,31 +36,6 @@ void __init find_str_pc_offset(void);
 #endif
 
 
-/*
- * Update ITSTATE after normal execution of an IT block instruction.
- *
- * The 8 IT state bits are split into two parts in CPSR:
- *	ITSTATE<1:0> are in CPSR<26:25>
- *	ITSTATE<7:2> are in CPSR<15:10>
- */
-static inline unsigned long it_advance(unsigned long cpsr)
-	{
-	if ((cpsr & 0x06000400) == 0) {
-		/* ITSTATE<2:0> == 0 means end of IT block, so clear IT state */
-		cpsr &= ~PSR_IT_MASK;
-	} else {
-		/* We need to shift left ITSTATE<4:0> */
-		const unsigned long mask = 0x06001c00;  /* Mask ITSTATE<4:0> */
-		unsigned long it = cpsr & mask;
-		it <<= 1;
-		it |= it >> (27 - 10);  /* Carry ITSTATE<2> to correct place */
-		it &= mask;
-		cpsr &= ~mask;
-		cpsr |= it;
-	}
-	return cpsr;
-}
-
 static inline void __kprobes bx_write_pc(long pcv, struct pt_regs *regs)
 {
 	long cpsr = regs->ARM_cpsr;

[PATCH 5.4 12/71] wifi: mac80211: fix queue selection for mesh/OCB interfaces

[Greg Kroah-Hartman]

From: Felix Fietkau <nbd@nbd.name>

commit 50e2ab39291947b6c6c7025cf01707c270fcde59 upstream.

When using iTXQ, the code assumes that there is only one vif queue for
broadcast packets, using the BE queue. Allowing non-BE queue marking
violates that assumption and txq->ac == skb_queue_mapping is no longer
guaranteed. This can cause issues with queue handling in the driver and
also causes issues with the recent ATF change, resulting in an AQL
underflow warning.

Cc: stable@vger.kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20220702145227.39356-1-nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/mac80211/wme.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/net/mac80211/wme.c
+++ b/net/mac80211/wme.c
@@ -145,8 +145,8 @@ u16 __ieee80211_select_queue(struct ieee
 	bool qos;
 
 	/* all mesh/ocb stations are required to support WME */
-	if (sdata->vif.type == NL80211_IFTYPE_MESH_POINT ||
-	    sdata->vif.type == NL80211_IFTYPE_OCB)
+	if (sta && (sdata->vif.type == NL80211_IFTYPE_MESH_POINT ||
+		    sdata->vif.type == NL80211_IFTYPE_OCB))
 		qos = true;
 	else if (sta)
 		qos = sta->sta.wme;

[PATCH 5.4 13/71] cgroup: Use separate src/dst nodes when preloading css_sets for migration

[Greg Kroah-Hartman]

From: Tejun Heo <tj@kernel.org>

commit 07fd5b6cdf3cc30bfde8fe0f644771688be04447 upstream.

Each cset (css_set) is pinned by its tasks. When we're moving tasks around
across csets for a migration, we need to hold the source and destination
csets to ensure that they don't go away while we're moving tasks about. This
is done by linking cset->mg_preload_node on either the
mgctx->preloaded_src_csets or mgctx->preloaded_dst_csets list. Using the
same cset->mg_preload_node for both the src and dst lists was deemed okay as
a cset can't be both the source and destination at the same time.

Unfortunately, this overloading becomes problematic when multiple tasks are
involved in a migration and some of them are identity noop migrations while
others are actually moving across cgroups. For example, this can happen with
the following sequence on cgroup1:

 #1> mkdir -p /sys/fs/cgroup/misc/a/b
 #2> echo $$ > /sys/fs/cgroup/misc/a/cgroup.procs
 #3> RUN_A_COMMAND_WHICH_CREATES_MULTIPLE_THREADS &
 #4> PID=$!
 #5> echo $PID > /sys/fs/cgroup/misc/a/b/tasks
 #6> echo $PID > /sys/fs/cgroup/misc/a/cgroup.procs

the process including the group leader back into a. In this final migration,
non-leader threads would be doing identity migration while the group leader
is doing an actual one.

After #3, let's say the whole process was in cset A, and that after #4, the
leader moves to cset B. Then, during #6, the following happens:

 1. cgroup_migrate_add_src() is called on B for the leader.

 2. cgroup_migrate_add_src() is called on A for the other threads.

 3. cgroup_migrate_prepare_dst() is called. It scans the src list.

 4. It notices that B wants to migrate to A, so it tries to A to the dst
    list but realizes that its ->mg_preload_node is already busy.

 5. and then it notices A wants to migrate to A as it's an identity
    migration, it culls it by list_del_init()'ing its ->mg_preload_node and
    putting references accordingly.

 6. The rest of migration takes place with B on the src list but nothing on
    the dst list.

This means that A isn't held while migration is in progress. If all tasks
leave A before the migration finishes and the incoming task pins it, the
cset will be destroyed leading to use-after-free.

This is caused by overloading cset->mg_preload_node for both src and dst
preload lists. We wanted to exclude the cset from the src list but ended up
inadvertently excluding it from the dst list too.

This patch fixes the issue by separating out cset->mg_preload_node into
->mg_src_preload_node and ->mg_dst_preload_node, so that the src and dst
preloadings don't interfere with each other.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Mukesh Ojha <quic_mojha@quicinc.com>
Reported-by: shisiyuan <shisiyuan19870131@gmail.com>
Link: http://lkml.kernel.org/r/1654187688-27411-1-git-send-email-shisiyuan@xiaomi.com
Link: https://www.spinics.net/lists/cgroups/msg33313.html
Fixes: f817de98513d ("cgroup: prepare migration path for unified hierarchy")
Cc: stable@vger.kernel.org # v3.16+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 include/linux/cgroup-defs.h |    3 ++-
 kernel/cgroup/cgroup.c      |   37 +++++++++++++++++++++++--------------
 2 files changed, 25 insertions(+), 15 deletions(-)

--- a/include/linux/cgroup-defs.h
+++ b/include/linux/cgroup-defs.h
@@ -255,7 +255,8 @@ struct css_set {
 	 * List of csets participating in the on-going migration either as
 	 * source or destination.  Protected by cgroup_mutex.
 	 */
-	struct list_head mg_preload_node;
+	struct list_head mg_src_preload_node;
+	struct list_head mg_dst_preload_node;
 	struct list_head mg_node;
 
 	/*
--- a/kernel/cgroup/cgroup.c
+++ b/kernel/cgroup/cgroup.c
@@ -743,7 +743,8 @@ struct css_set init_css_set = {
 	.task_iters		= LIST_HEAD_INIT(init_css_set.task_iters),
 	.threaded_csets		= LIST_HEAD_INIT(init_css_set.threaded_csets),
 	.cgrp_links		= LIST_HEAD_INIT(init_css_set.cgrp_links),
-	.mg_preload_node	= LIST_HEAD_INIT(init_css_set.mg_preload_node),
+	.mg_src_preload_node	= LIST_HEAD_INIT(init_css_set.mg_src_preload_node),
+	.mg_dst_preload_node	= LIST_HEAD_INIT(init_css_set.mg_dst_preload_node),
 	.mg_node		= LIST_HEAD_INIT(init_css_set.mg_node),
 
 	/*
@@ -1219,7 +1220,8 @@ static struct css_set *find_css_set(stru
 	INIT_LIST_HEAD(&cset->threaded_csets);
 	INIT_HLIST_NODE(&cset->hlist);
 	INIT_LIST_HEAD(&cset->cgrp_links);
-	INIT_LIST_HEAD(&cset->mg_preload_node);
+	INIT_LIST_HEAD(&cset->mg_src_preload_node);
+	INIT_LIST_HEAD(&cset->mg_dst_preload_node);
 	INIT_LIST_HEAD(&cset->mg_node);
 
 	/* Copy the set of subsystem state objects generated in
@@ -2629,21 +2631,27 @@ int cgroup_migrate_vet_dst(struct cgroup
  */
 void cgroup_migrate_finish(struct cgroup_mgctx *mgctx)
 {
-	LIST_HEAD(preloaded);
 	struct css_set *cset, *tmp_cset;
 
 	lockdep_assert_held(&cgroup_mutex);
 
 	spin_lock_irq(&css_set_lock);
 
-	list_splice_tail_init(&mgctx->preloaded_src_csets, &preloaded);
-	list_splice_tail_init(&mgctx->preloaded_dst_csets, &preloaded);
+	list_for_each_entry_safe(cset, tmp_cset, &mgctx->preloaded_src_csets,
+				 mg_src_preload_node) {
+		cset->mg_src_cgrp = NULL;
+		cset->mg_dst_cgrp = NULL;
+		cset->mg_dst_cset = NULL;
+		list_del_init(&cset->mg_src_preload_node);
+		put_css_set_locked(cset);
+	}
 
-	list_for_each_entry_safe(cset, tmp_cset, &preloaded, mg_preload_node) {
+	list_for_each_entry_safe(cset, tmp_cset, &mgctx->preloaded_dst_csets,
+				 mg_dst_preload_node) {
 		cset->mg_src_cgrp = NULL;
 		cset->mg_dst_cgrp = NULL;
 		cset->mg_dst_cset = NULL;
-		list_del_init(&cset->mg_preload_node);
+		list_del_init(&cset->mg_dst_preload_node);
 		put_css_set_locked(cset);
 	}
 
@@ -2685,7 +2693,7 @@ void cgroup_migrate_add_src(struct css_s
 
 	src_cgrp = cset_cgroup_from_root(src_cset, dst_cgrp->root);
 
-	if (!list_empty(&src_cset->mg_preload_node))
+	if (!list_empty(&src_cset->mg_src_preload_node))
 		return;
 
 	WARN_ON(src_cset->mg_src_cgrp);
@@ -2696,7 +2704,7 @@ void cgroup_migrate_add_src(struct css_s
 	src_cset->mg_src_cgrp = src_cgrp;
 	src_cset->mg_dst_cgrp = dst_cgrp;
 	get_css_set(src_cset);
-	list_add_tail(&src_cset->mg_preload_node, &mgctx->preloaded_src_csets);
+	list_add_tail(&src_cset->mg_src_preload_node, &mgctx->preloaded_src_csets);
 }
 
 /**
@@ -2721,7 +2729,7 @@ int cgroup_migrate_prepare_dst(struct cg
 
 	/* look up the dst cset for each src cset and link it to src */
 	list_for_each_entry_safe(src_cset, tmp_cset, &mgctx->preloaded_src_csets,
-				 mg_preload_node) {
+				 mg_src_preload_node) {
 		struct css_set *dst_cset;
 		struct cgroup_subsys *ss;
 		int ssid;
@@ -2740,7 +2748,7 @@ int cgroup_migrate_prepare_dst(struct cg
 		if (src_cset == dst_cset) {
 			src_cset->mg_src_cgrp = NULL;
 			src_cset->mg_dst_cgrp = NULL;
-			list_del_init(&src_cset->mg_preload_node);
+			list_del_init(&src_cset->mg_src_preload_node);
 			put_css_set(src_cset);
 			put_css_set(dst_cset);
 			continue;
@@ -2748,8 +2756,8 @@ int cgroup_migrate_prepare_dst(struct cg
 
 		src_cset->mg_dst_cset = dst_cset;
 
-		if (list_empty(&dst_cset->mg_preload_node))
-			list_add_tail(&dst_cset->mg_preload_node,
+		if (list_empty(&dst_cset->mg_dst_preload_node))
+			list_add_tail(&dst_cset->mg_dst_preload_node,
 				      &mgctx->preloaded_dst_csets);
 		else
 			put_css_set(dst_cset);
@@ -2980,7 +2988,8 @@ static int cgroup_update_dfl_csses(struc
 		goto out_finish;
 
 	spin_lock_irq(&css_set_lock);
-	list_for_each_entry(src_cset, &mgctx.preloaded_src_csets, mg_preload_node) {
+	list_for_each_entry(src_cset, &mgctx.preloaded_src_csets,
+			    mg_src_preload_node) {
 		struct task_struct *task, *ntask;
 
 		/* all tasks in src_csets need to be migrated */

[PATCH 5.4 14/71] drm/panfrost: Fix shrinker list corruption by madvise IOCTL

[Greg Kroah-Hartman]

From: Dmitry Osipenko <dmitry.osipenko@collabora.com>

commit 9fc33eaaa979d112d10fea729edcd2a2e21aa912 upstream.

Calling madvise IOCTL twice on BO causes memory shrinker list corruption
and crashes kernel because BO is already on the list and it's added to
the list again, while BO should be removed from the list before it's
re-added. Fix it.

Cc: stable@vger.kernel.org
Fixes: 013b65101315 ("drm/panfrost: Add madvise and shrinker support")
Acked-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220630200601.1884120-3-dmitry.osipenko@collabora.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/gpu/drm/panfrost/panfrost_drv.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/gpu/drm/panfrost/panfrost_drv.c
+++ b/drivers/gpu/drm/panfrost/panfrost_drv.c
@@ -428,8 +428,8 @@ static int panfrost_ioctl_madvise(struct
 
 	if (args->retained) {
 		if (args->madv == PANFROST_MADV_DONTNEED)
-			list_add_tail(&bo->base.madv_list,
-				      &pfdev->shrinker_list);
+			list_move_tail(&bo->base.madv_list,
+				       &pfdev->shrinker_list);
 		else if (args->madv == PANFROST_MADV_WILLNEED)
 			list_del_init(&bo->base.madv_list);
 	}

[PATCH 5.4 15/71] nilfs2: fix incorrect masking of permission flags for symlinks

[Greg Kroah-Hartman]

From: Ryusuke Konishi <konishi.ryusuke@gmail.com>

commit 5924e6ec1585445f251ea92713eb15beb732622a upstream.

The permission flags of newly created symlinks are wrongly dropped on
nilfs2 with the current umask value even though symlinks should have 777
(rwxrwxrwx) permissions:

 $ umask
 0022
 $ touch file && ln -s file symlink; ls -l file symlink
 -rw-r--r--. 1 root root 0 Jun 23 16:29 file
 lrwxr-xr-x. 1 root root 4 Jun 23 16:29 symlink -> file

This fixes the bug by inserting a missing check that excludes
symlinks.

Link: https://lkml.kernel.org/r/1655974441-5612-1-git-send-email-konishi.ryusuke@gmail.com
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reported-by: Tommy Pettersson <ptp@lysator.liu.se>
Reported-by: Ciprian Craciun <ciprian.craciun@gmail.com>
Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/nilfs2/nilfs.h |    3 +++
 1 file changed, 3 insertions(+)

--- a/fs/nilfs2/nilfs.h
+++ b/fs/nilfs2/nilfs.h
@@ -198,6 +198,9 @@ static inline int nilfs_acl_chmod(struct
 
 static inline int nilfs_init_acl(struct inode *inode, struct inode *dir)
 {
+	if (S_ISLNK(inode->i_mode))
+		return 0;
+
 	inode->i_mode &= ~current_umask();
 	return 0;
 }

[PATCH 5.4 16/71] Revert "evm: Fix memleak in init_desc"

[Greg Kroah-Hartman]

From: Xiu Jianfeng <xiujianfeng@huawei.com>

commit 51dd64bb99e4478fc5280171acd8e1b529eadaf7 upstream.

This reverts commit ccf11dbaa07b328fa469415c362d33459c140a37.

Commit ccf11dbaa07b ("evm: Fix memleak in init_desc") said there is
memleak in init_desc. That may be incorrect, as we can see, tmp_tfm is
saved in one of the two global variables hmac_tfm or evm_tfm[hash_algo],
then if init_desc is called next time, there is no need to alloc tfm
again, so in the error path of kmalloc desc or crypto_shash_init(desc),
It is not a problem without freeing tmp_tfm.

And also that commit did not reset the global variable to NULL after
freeing tmp_tfm and this makes *tfm a dangling pointer which may cause a
UAF issue.

Reported-by: Guozihua (Scott) <guozihua@huawei.com>
Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 security/integrity/evm/evm_crypto.c |    7 ++-----
 1 file changed, 2 insertions(+), 5 deletions(-)

--- a/security/integrity/evm/evm_crypto.c
+++ b/security/integrity/evm/evm_crypto.c
@@ -75,7 +75,7 @@ static struct shash_desc *init_desc(char
 {
 	long rc;
 	const char *algo;
-	struct crypto_shash **tfm, *tmp_tfm = NULL;
+	struct crypto_shash **tfm, *tmp_tfm;
 	struct shash_desc *desc;
 
 	if (type == EVM_XATTR_HMAC) {
@@ -120,16 +120,13 @@ unlock:
 alloc:
 	desc = kmalloc(sizeof(*desc) + crypto_shash_descsize(*tfm),
 			GFP_KERNEL);
-	if (!desc) {
-		crypto_free_shash(tmp_tfm);
+	if (!desc)
 		return ERR_PTR(-ENOMEM);
-	}
 
 	desc->tfm = *tfm;
 
 	rc = crypto_shash_init(desc);
 	if (rc) {
-		crypto_free_shash(tmp_tfm);
 		kfree(desc);
 		return ERR_PTR(rc);
 	}

[PATCH 5.4 17/71] sched/rt: Disable RT_RUNTIME_SHARE by default

[Greg Kroah-Hartman]

From: Daniel Bristot de Oliveira <bristot@redhat.com>

commit 2586af1ac187f6b3a50930a4e33497074e81762d upstream.

The RT_RUNTIME_SHARE sched feature enables the sharing of rt_runtime
between CPUs, allowing a CPU to run a real-time task up to 100% of the
time while leaving more space for non-real-time tasks to run on the CPU
that lend rt_runtime.

The problem is that a CPU can easily borrow enough rt_runtime to allow
a spinning rt-task to run forever, starving per-cpu tasks like kworkers,
which are non-real-time by design.

This patch disables RT_RUNTIME_SHARE by default, avoiding this problem.
The feature will still be present for users that want to enable it,
though.

Signed-off-by: Daniel Bristot de Oliveira <bristot@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Wei Wang <wvw@google.com>
Link: https://lkml.kernel.org/r/b776ab46817e3db5d8ef79175fa0d71073c051c7.1600697903.git.bristot@redhat.com
Signed-off-by: Mark-PK Tsai <mark-pk.tsai@mediatek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 kernel/sched/features.h |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/kernel/sched/features.h
+++ b/kernel/sched/features.h
@@ -77,7 +77,7 @@ SCHED_FEAT(WARN_DOUBLE_CLOCK, false)
 SCHED_FEAT(RT_PUSH_IPI, true)
 #endif
 
-SCHED_FEAT(RT_RUNTIME_SHARE, true)
+SCHED_FEAT(RT_RUNTIME_SHARE, false)
 SCHED_FEAT(LB_MIN, false)
 SCHED_FEAT(ATTACH_AGE_LOAD, true)
 

[PATCH 5.4 18/71] ext4: fix race condition between ext4_write and ext4_convert_inline_data

[Greg Kroah-Hartman]

From: Baokun Li <libaokun1@huawei.com>

commit f87c7a4b084afc13190cbb263538e444cb2b392a upstream.

Hulk Robot reported a BUG_ON:
 ==================================================================
 EXT4-fs error (device loop3): ext4_mb_generate_buddy:805: group 0,
 block bitmap and bg descriptor inconsistent: 25 vs 31513 free clusters
 kernel BUG at fs/ext4/ext4_jbd2.c:53!
 invalid opcode: 0000 [#1] SMP KASAN PTI
 CPU: 0 PID: 25371 Comm: syz-executor.3 Not tainted 5.10.0+ #1
 RIP: 0010:ext4_put_nojournal fs/ext4/ext4_jbd2.c:53 [inline]
 RIP: 0010:__ext4_journal_stop+0x10e/0x110 fs/ext4/ext4_jbd2.c:116
 [...]
 Call Trace:
  ext4_write_inline_data_end+0x59a/0x730 fs/ext4/inline.c:795
  generic_perform_write+0x279/0x3c0 mm/filemap.c:3344
  ext4_buffered_write_iter+0x2e3/0x3d0 fs/ext4/file.c:270
  ext4_file_write_iter+0x30a/0x11c0 fs/ext4/file.c:520
  do_iter_readv_writev+0x339/0x3c0 fs/read_write.c:732
  do_iter_write+0x107/0x430 fs/read_write.c:861
  vfs_writev fs/read_write.c:934 [inline]
  do_pwritev+0x1e5/0x380 fs/read_write.c:1031
 [...]
 ==================================================================

Above issue may happen as follows:
           cpu1                     cpu2
__________________________|__________________________
do_pwritev
 vfs_writev
  do_iter_write
   ext4_file_write_iter
    ext4_buffered_write_iter
     generic_perform_write
      ext4_da_write_begin
                           vfs_fallocate
                            ext4_fallocate
                             ext4_convert_inline_data
                              ext4_convert_inline_data_nolock
                               ext4_destroy_inline_data_nolock
                                clear EXT4_STATE_MAY_INLINE_DATA
                               ext4_map_blocks
                                ext4_ext_map_blocks
                                 ext4_mb_new_blocks
                                  ext4_mb_regular_allocator
                                   ext4_mb_good_group_nolock
                                    ext4_mb_init_group
                                     ext4_mb_init_cache
                                      ext4_mb_generate_buddy  --> error
       ext4_test_inode_state(inode, EXT4_STATE_MAY_INLINE_DATA)
                                ext4_restore_inline_data
                                 set EXT4_STATE_MAY_INLINE_DATA
       ext4_block_write_begin
      ext4_da_write_end
       ext4_test_inode_state(inode, EXT4_STATE_MAY_INLINE_DATA)
       ext4_write_inline_data_end
        handle=NULL
        ext4_journal_stop(handle)
         __ext4_journal_stop
          ext4_put_nojournal(handle)
           ref_cnt = (unsigned long)handle
           BUG_ON(ref_cnt == 0)  ---> BUG_ON

The lock held by ext4_convert_inline_data is xattr_sem, but the lock
held by generic_perform_write is i_rwsem. Therefore, the two locks can
be concurrent.

To solve above issue, we add inode_lock() for ext4_convert_inline_data().
At the same time, move ext4_convert_inline_data() in front of
ext4_punch_hole(), remove similar handling from ext4_punch_hole().

Fixes: 0c8d414f163f ("ext4: let fallocate handle inline data correctly")
Cc: stable@vger.kernel.org
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220428134031.4153381-1-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Tadeusz Struk <tadeusz.struk@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/ext4/extents.c |    8 +++++---
 fs/ext4/inode.c   |    9 ---------
 2 files changed, 5 insertions(+), 12 deletions(-)

--- a/fs/ext4/extents.c
+++ b/fs/ext4/extents.c
@@ -4932,13 +4932,15 @@ long ext4_fallocate(struct file *file, i
 		     FALLOC_FL_INSERT_RANGE))
 		return -EOPNOTSUPP;
 
-	if (mode & FALLOC_FL_PUNCH_HOLE)
-		return ext4_punch_hole(inode, offset, len);
-
+	inode_lock(inode);
 	ret = ext4_convert_inline_data(inode);
+	inode_unlock(inode);
 	if (ret)
 		return ret;
 
+	if (mode & FALLOC_FL_PUNCH_HOLE)
+		return ext4_punch_hole(inode, offset, len);
+
 	if (mode & FALLOC_FL_COLLAPSE_RANGE)
 		return ext4_collapse_range(inode, offset, len);
 
--- a/fs/ext4/inode.c
+++ b/fs/ext4/inode.c
@@ -4322,15 +4322,6 @@ int ext4_punch_hole(struct inode *inode,
 
 	trace_ext4_punch_hole(inode, offset, length, 0);
 
-	ext4_clear_inode_state(inode, EXT4_STATE_MAY_INLINE_DATA);
-	if (ext4_has_inline_data(inode)) {
-		down_write(&EXT4_I(inode)->i_mmap_sem);
-		ret = ext4_convert_inline_data(inode);
-		up_write(&EXT4_I(inode)->i_mmap_sem);
-		if (ret)
-			return ret;
-	}
-
 	/*
 	 * Write out all dirty pages to avoid race conditions
 	 * Then release them.

[PATCH 5.4 19/71] ARM: dts: imx6qdl-ts7970: Fix ngpio typo and count

[Greg Kroah-Hartman]

From: Kris Bahnsen <kris@embeddedTS.com>

[ Upstream commit e95ea0f687e679fcb0a3a67d0755b81ee7d60db0 ]

Device-tree incorrectly used "ngpio" which caused the driver to
fallback to 32 ngpios.

This platform has 62 GPIO registers.

Fixes: 9ff8e9fccef9 ("ARM: dts: TS-7970: add basic device tree")
Signed-off-by: Kris Bahnsen <kris@embeddedTS.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/imx6qdl-ts7970.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/imx6qdl-ts7970.dtsi b/arch/arm/boot/dts/imx6qdl-ts7970.dtsi
index f0be516dc28e..9181fbeb833d 100644
--- a/arch/arm/boot/dts/imx6qdl-ts7970.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-ts7970.dtsi
@@ -226,7 +226,7 @@ gpio8: gpio@28 {
 		reg = <0x28>;
 		#gpio-cells = <2>;
 		gpio-controller;
-		ngpio = <32>;
+		ngpios = <62>;
 	};
 
 	sgtl5000: codec@a {
-- 
2.35.1

[PATCH 5.4 20/71] ARM: 9209/1: Spectre-BHB: avoid pr_info() every time a CPU comes out of idle

[Greg Kroah-Hartman]

From: Ard Biesheuvel <ardb@kernel.org>

[ Upstream commit 0609e200246bfd3b7516091c491bec4308349055 ]

Jon reports that the Spectre-BHB init code is filling up the kernel log
with spurious notifications about which mitigation has been enabled,
every time any CPU comes out of a low power state.

Given that Spectre-BHB mitigations are system wide, only a single
mitigation can be enabled, and we already print an error if two types of
CPUs coexist in a single system that require different Spectre-BHB
mitigations.

This means that the pr_info() that describes the selected mitigation
does not need to be emitted for each CPU anyway, and so we can simply
emit it only once.

In order to clarify the above in the log message, update it to describe
that the selected mitigation will be enabled on all CPUs, including ones
that are unaffected. If another CPU comes up later that is affected and
requires a different mitigation, we report an error as before.

Fixes: b9baf5c8c5c3 ("ARM: Spectre-BHB workaround")
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/mm/proc-v7-bugs.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm/mm/proc-v7-bugs.c b/arch/arm/mm/proc-v7-bugs.c
index f2c8ff0683fd..b09c54499f95 100644
--- a/arch/arm/mm/proc-v7-bugs.c
+++ b/arch/arm/mm/proc-v7-bugs.c
@@ -221,10 +221,10 @@ static int spectre_bhb_install_workaround(int method)
 			return SPECTRE_VULNERABLE;
 
 		spectre_bhb_method = method;
-	}
 
-	pr_info("CPU%u: Spectre BHB: using %s workaround\n",
-		smp_processor_id(), spectre_bhb_method_name(method));
+		pr_info("CPU%u: Spectre BHB: enabling %s workaround for all CPUs\n",
+			smp_processor_id(), spectre_bhb_method_name(method));
+	}
 
 	return SPECTRE_MITIGATED;
 }
-- 
2.35.1

[PATCH 5.4 21/71] ARM: 9210/1: Mark the FDT_FIXED sections as shareable

[Greg Kroah-Hartman]

From: Zhen Lei <thunder.leizhen@huawei.com>

[ Upstream commit 598f0a99fa8a35be44b27106b43ddc66417af3b1 ]

commit 7a1be318f579 ("ARM: 9012/1: move device tree mapping out of linear
region") use FDT_FIXED_BASE to map the whole FDT_FIXED_SIZE memory area
which contains fdt. But it only reserves the exact physical memory that
fdt occupied. Unfortunately, this mapping is non-shareable. An illegal or
speculative read access can bring the RAM content from non-fdt zone into
cache, PIPT makes it to be hit by subsequently read access through
shareable mapping(such as linear mapping), and the cache consistency
between cores is lost due to non-shareable property.

|<---------FDT_FIXED_SIZE------>|
|                               |
 -------------------------------
| <non-fdt> | <fdt> | <non-fdt> |
 -------------------------------

1. CoreA read <non-fdt> through MT_ROM mapping, the old data is loaded
   into the cache.
2. CoreB write <non-fdt> to update data through linear mapping. CoreA
   received the notification to invalid the corresponding cachelines, but
   the property non-shareable makes it to be ignored.
3. CoreA read <non-fdt> through linear mapping, cache hit, the old data
   is read.

To eliminate this risk, add a new memory type MT_MEMORY_RO. Compared to
MT_ROM, it is shareable and non-executable.

Here's an example:
  list_del corruption. prev->next should be c0ecbf74, but was c08410dc
  kernel BUG at lib/list_debug.c:53!
  ... ...
  PC is at __list_del_entry_valid+0x58/0x98
  LR is at __list_del_entry_valid+0x58/0x98
  psr: 60000093
  sp : c0ecbf30  ip : 00000000  fp : 00000001
  r10: c08410d0  r9 : 00000001  r8 : c0825e0c
  r7 : 20000013  r6 : c08410d0  r5 : c0ecbf74  r4 : c0ecbf74
  r3 : c0825d08  r2 : 00000000  r1 : df7ce6f4  r0 : 00000044
  ... ...
  Stack: (0xc0ecbf30 to 0xc0ecc000)
  bf20:                                     c0ecbf74 c0164fd0 c0ecbf70 c0165170
  bf40: c0eca000 c0840c00 c0840c00 c0824500 c0825e0c c0189bbc c088f404 60000013
  bf60: 60000013 c0e85100 000004ec 00000000 c0ebcdc0 c0ecbf74 c0ecbf74 c0825d08
  ... ...                                           <  next     prev  >
  (__list_del_entry_valid) from (__list_del_entry+0xc/0x20)
  (__list_del_entry) from (finish_swait+0x60/0x7c)
  (finish_swait) from (rcu_gp_kthread+0x560/0xa20)
  (rcu_gp_kthread) from (kthread+0x14c/0x15c)
  (kthread) from (ret_from_fork+0x14/0x24)

The faulty list node to be deleted is a local variable, its address is
c0ecbf74. The dumped stack shows that 'prev' = c0ecbf74, but its value
before lib/list_debug.c:53 is c08410dc. A large amount of printing results
in swapping out the cacheline containing the old data(MT_ROM mapping is
read only, so the cacheline cannot be dirty), and the subsequent dump
operation obtains new data from the DDR.

Fixes: 7a1be318f579 ("ARM: 9012/1: move device tree mapping out of linear region")
Suggested-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/include/asm/mach/map.h |  1 +
 arch/arm/mm/mmu.c               | 15 ++++++++++++++-
 2 files changed, 15 insertions(+), 1 deletion(-)

diff --git a/arch/arm/include/asm/mach/map.h b/arch/arm/include/asm/mach/map.h
index 92282558caf7..2b8970d8e5a2 100644
--- a/arch/arm/include/asm/mach/map.h
+++ b/arch/arm/include/asm/mach/map.h
@@ -27,6 +27,7 @@ enum {
 	MT_HIGH_VECTORS,
 	MT_MEMORY_RWX,
 	MT_MEMORY_RW,
+	MT_MEMORY_RO,
 	MT_ROM,
 	MT_MEMORY_RWX_NONCACHED,
 	MT_MEMORY_RW_DTCM,
diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c
index 6e7f841f67ff..463cbb0631be 100644
--- a/arch/arm/mm/mmu.c
+++ b/arch/arm/mm/mmu.c
@@ -316,6 +316,13 @@ static struct mem_type mem_types[] __ro_after_init = {
 		.prot_sect = PMD_TYPE_SECT | PMD_SECT_AP_WRITE,
 		.domain    = DOMAIN_KERNEL,
 	},
+	[MT_MEMORY_RO] = {
+		.prot_pte  = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY |
+			     L_PTE_XN | L_PTE_RDONLY,
+		.prot_l1   = PMD_TYPE_TABLE,
+		.prot_sect = PMD_TYPE_SECT,
+		.domain    = DOMAIN_KERNEL,
+	},
 	[MT_ROM] = {
 		.prot_sect = PMD_TYPE_SECT,
 		.domain    = DOMAIN_KERNEL,
@@ -515,6 +522,7 @@ static void __init build_mem_type_table(void)
 
 			/* Also setup NX memory mapping */
 			mem_types[MT_MEMORY_RW].prot_sect |= PMD_SECT_XN;
+			mem_types[MT_MEMORY_RO].prot_sect |= PMD_SECT_XN;
 		}
 		if (cpu_arch >= CPU_ARCH_ARMv7 && (cr & CR_TRE)) {
 			/*
@@ -597,6 +605,7 @@ static void __init build_mem_type_table(void)
 		mem_types[MT_ROM].prot_sect |= PMD_SECT_APX|PMD_SECT_AP_WRITE;
 		mem_types[MT_MINICLEAN].prot_sect |= PMD_SECT_APX|PMD_SECT_AP_WRITE;
 		mem_types[MT_CACHECLEAN].prot_sect |= PMD_SECT_APX|PMD_SECT_AP_WRITE;
+		mem_types[MT_MEMORY_RO].prot_sect |= PMD_SECT_APX|PMD_SECT_AP_WRITE;
 #endif
 
 		/*
@@ -617,6 +626,8 @@ static void __init build_mem_type_table(void)
 			mem_types[MT_MEMORY_RWX].prot_pte |= L_PTE_SHARED;
 			mem_types[MT_MEMORY_RW].prot_sect |= PMD_SECT_S;
 			mem_types[MT_MEMORY_RW].prot_pte |= L_PTE_SHARED;
+			mem_types[MT_MEMORY_RO].prot_sect |= PMD_SECT_S;
+			mem_types[MT_MEMORY_RO].prot_pte |= L_PTE_SHARED;
 			mem_types[MT_MEMORY_DMA_READY].prot_pte |= L_PTE_SHARED;
 			mem_types[MT_MEMORY_RWX_NONCACHED].prot_sect |= PMD_SECT_S;
 			mem_types[MT_MEMORY_RWX_NONCACHED].prot_pte |= L_PTE_SHARED;
@@ -680,6 +691,8 @@ static void __init build_mem_type_table(void)
 	mem_types[MT_MEMORY_RWX].prot_pte |= kern_pgprot;
 	mem_types[MT_MEMORY_RW].prot_sect |= ecc_mask | cp->pmd;
 	mem_types[MT_MEMORY_RW].prot_pte |= kern_pgprot;
+	mem_types[MT_MEMORY_RO].prot_sect |= ecc_mask | cp->pmd;
+	mem_types[MT_MEMORY_RO].prot_pte |= kern_pgprot;
 	mem_types[MT_MEMORY_DMA_READY].prot_pte |= kern_pgprot;
 	mem_types[MT_MEMORY_RWX_NONCACHED].prot_sect |= ecc_mask;
 	mem_types[MT_ROM].prot_sect |= cp->pmd;
@@ -1361,7 +1374,7 @@ static void __init devicemaps_init(const struct machine_desc *mdesc)
 		map.pfn = __phys_to_pfn(__atags_pointer & SECTION_MASK);
 		map.virtual = FDT_FIXED_BASE;
 		map.length = FDT_FIXED_SIZE;
-		map.type = MT_ROM;
+		map.type = MT_MEMORY_RO;
 		create_mapping(&map);
 	}
 
-- 
2.35.1

[PATCH 5.4 22/71] drm/i915: fix a possible refcount leak in intel_dp_add_mst_connector()

[Greg Kroah-Hartman]

From: Hangyu Hua <hbh25y@gmail.com>

[ Upstream commit 85144df9ff4652816448369de76897c57cbb1b93 ]

If drm_connector_init fails, intel_connector_free will be called to take
care of proper free. So it is necessary to drop the refcount of port
before intel_connector_free.

Fixes: 091a4f91942a ("drm/i915: Handle drm-layer errors in intel_dp_add_mst_connector")
Signed-off-by: Hangyu Hua <hbh25y@gmail.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220624130406.17996-1-jose.souza@intel.com
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
(cherry picked from commit cea9ed611e85d36a05db52b6457bf584b7d969e2)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/i915/display/intel_dp_mst.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/gpu/drm/i915/display/intel_dp_mst.c b/drivers/gpu/drm/i915/display/intel_dp_mst.c
index 74d45a0eecb8..c59b43fb34a8 100644
--- a/drivers/gpu/drm/i915/display/intel_dp_mst.c
+++ b/drivers/gpu/drm/i915/display/intel_dp_mst.c
@@ -520,6 +520,7 @@ static struct drm_connector *intel_dp_add_mst_connector(struct drm_dp_mst_topolo
 	ret = drm_connector_init(dev, connector, &intel_dp_mst_connector_funcs,
 				 DRM_MODE_CONNECTOR_DisplayPort);
 	if (ret) {
+		drm_dp_mst_put_port_malloc(port);
 		intel_connector_free(intel_connector);
 		return NULL;
 	}
-- 
2.35.1

[PATCH 5.4 23/71] ima: Fix a potential integer overflow in ima_appraise_measurement

[Greg Kroah-Hartman]

From: Huaxin Lu <luhuaxin1@huawei.com>

[ Upstream commit d2ee2cfc4aa85ff6a2a3b198a3a524ec54e3d999 ]

When the ima-modsig is enabled, the rc passed to evm_verifyxattr() may be
negative, which may cause the integer overflow problem.

Fixes: 39b07096364a ("ima: Implement support for module-style appended signatures")
Signed-off-by: Huaxin Lu <luhuaxin1@huawei.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 security/integrity/ima/ima_appraise.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/security/integrity/ima/ima_appraise.c b/security/integrity/ima/ima_appraise.c
index 23b04c6521b2..9368688449b0 100644
--- a/security/integrity/ima/ima_appraise.c
+++ b/security/integrity/ima/ima_appraise.c
@@ -352,7 +352,8 @@ int ima_appraise_measurement(enum ima_hooks func,
 		goto out;
 	}
 
-	status = evm_verifyxattr(dentry, XATTR_NAME_IMA, xattr_value, rc, iint);
+	status = evm_verifyxattr(dentry, XATTR_NAME_IMA, xattr_value,
+				 rc < 0 ? 0 : rc, iint);
 	switch (status) {
 	case INTEGRITY_PASS:
 	case INTEGRITY_PASS_IMMUTABLE:
-- 
2.35.1

[PATCH 5.4 24/71] ASoC: sgtl5000: Fix noise on shutdown/remove

[Greg Kroah-Hartman]

From: Francesco Dolcini <francesco.dolcini@toradex.com>

[ Upstream commit 040e3360af3736348112d29425bf5d0be5b93115 ]

Put the SGTL5000 in a silent/safe state on shutdown/remove, this is
required since the SGTL5000 produces a constant noise on its output
after it is configured and its clock is removed. Without this change
this is happening every time the module is unbound/removed or from
reboot till the clock is enabled again.

The issue was experienced on both a Toradex Colibri/Apalis iMX6, but can
be easily reproduced everywhere just playing something on the codec and
after that removing/unbinding the driver.

Fixes: 9b34e6cc3bc2 ("ASoC: Add Freescale SGTL5000 codec support")
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Reviewed-by: Fabio Estevam <festevam@denx.de>
Link: https://lore.kernel.org/r/20220624101301.441314-1-francesco.dolcini@toradex.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/codecs/sgtl5000.c | 9 +++++++++
 sound/soc/codecs/sgtl5000.h | 1 +
 2 files changed, 10 insertions(+)

diff --git a/sound/soc/codecs/sgtl5000.c b/sound/soc/codecs/sgtl5000.c
index 8a1e485982d8..76d3c0681f37 100644
--- a/sound/soc/codecs/sgtl5000.c
+++ b/sound/soc/codecs/sgtl5000.c
@@ -1788,6 +1788,9 @@ static int sgtl5000_i2c_remove(struct i2c_client *client)
 {
 	struct sgtl5000_priv *sgtl5000 = i2c_get_clientdata(client);
 
+	regmap_write(sgtl5000->regmap, SGTL5000_CHIP_DIG_POWER, SGTL5000_DIG_POWER_DEFAULT);
+	regmap_write(sgtl5000->regmap, SGTL5000_CHIP_ANA_POWER, SGTL5000_ANA_POWER_DEFAULT);
+
 	clk_disable_unprepare(sgtl5000->mclk);
 	regulator_bulk_disable(sgtl5000->num_supplies, sgtl5000->supplies);
 	regulator_bulk_free(sgtl5000->num_supplies, sgtl5000->supplies);
@@ -1795,6 +1798,11 @@ static int sgtl5000_i2c_remove(struct i2c_client *client)
 	return 0;
 }
 
+static void sgtl5000_i2c_shutdown(struct i2c_client *client)
+{
+	sgtl5000_i2c_remove(client);
+}
+
 static const struct i2c_device_id sgtl5000_id[] = {
 	{"sgtl5000", 0},
 	{},
@@ -1815,6 +1823,7 @@ static struct i2c_driver sgtl5000_i2c_driver = {
 		   },
 	.probe = sgtl5000_i2c_probe,
 	.remove = sgtl5000_i2c_remove,
+	.shutdown = sgtl5000_i2c_shutdown,
 	.id_table = sgtl5000_id,
 };
 
diff --git a/sound/soc/codecs/sgtl5000.h b/sound/soc/codecs/sgtl5000.h
index 56ec5863f250..3a808c762299 100644
--- a/sound/soc/codecs/sgtl5000.h
+++ b/sound/soc/codecs/sgtl5000.h
@@ -80,6 +80,7 @@
 /*
  * SGTL5000_CHIP_DIG_POWER
  */
+#define SGTL5000_DIG_POWER_DEFAULT		0x0000
 #define SGTL5000_ADC_EN				0x0040
 #define SGTL5000_DAC_EN				0x0020
 #define SGTL5000_DAP_POWERUP			0x0010
-- 
2.35.1

[PATCH 5.4 25/71] net: stmmac: dwc-qos: Disable split header for Tegra194

[Greg Kroah-Hartman]

From: Jon Hunter <jonathanh@nvidia.com>

[ Upstream commit 029c1c2059e9c4b38f97a06204cdecd10cfbeb8a ]

There is a long-standing issue with the Synopsys DWC Ethernet driver
for Tegra194 where random system crashes have been observed [0]. The
problem occurs when the split header feature is enabled in the stmmac
driver. In the bad case, a larger than expected buffer length is
received and causes the calculation of the total buffer length to
overflow. This results in a very large buffer length that causes the
kernel to crash. Why this larger buffer length is received is not clear,
however, the feedback from the NVIDIA design team is that the split
header feature is not supported for Tegra194. Therefore, disable split
header support for Tegra194 to prevent these random crashes from
occurring.

[0] https://lore.kernel.org/linux-tegra/b0b17697-f23e-8fa5-3757-604a86f3a095@nvidia.com/

Fixes: 67afd6d1cfdf ("net: stmmac: Add Split Header support and enable it in XGMAC cores")
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://lore.kernel.org/r/20220706083913.13750-1-jonathanh@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/stmicro/stmmac/dwmac-dwc-qos-eth.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-dwc-qos-eth.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-dwc-qos-eth.c
index dd9967aeda22..0f0094ced776 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-dwc-qos-eth.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-dwc-qos-eth.c
@@ -357,6 +357,7 @@ static void *tegra_eqos_probe(struct platform_device *pdev,
 	data->fix_mac_speed = tegra_eqos_fix_speed;
 	data->init = tegra_eqos_init;
 	data->bsp_priv = eqos;
+	data->sph_disable = 1;
 
 	err = tegra_eqos_init(pdev, eqos);
 	if (err < 0)
-- 
2.35.1

[PATCH 5.4 26/71] inetpeer: Fix data-races around sysctl.

[Greg Kroah-Hartman]

From: Kuniyuki Iwashima <kuniyu@amazon.com>

[ Upstream commit 3d32edf1f3c38d3301f6434e56316f293466d7fb ]

While reading inetpeer sysctl variables, they can be changed
concurrently.  So, we need to add READ_ONCE() to avoid data-races.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ipv4/inetpeer.c | 12 ++++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)

diff --git a/net/ipv4/inetpeer.c b/net/ipv4/inetpeer.c
index ff327a62c9ce..a18668552d33 100644
--- a/net/ipv4/inetpeer.c
+++ b/net/ipv4/inetpeer.c
@@ -148,16 +148,20 @@ static void inet_peer_gc(struct inet_peer_base *base,
 			 struct inet_peer *gc_stack[],
 			 unsigned int gc_cnt)
 {
+	int peer_threshold, peer_maxttl, peer_minttl;
 	struct inet_peer *p;
 	__u32 delta, ttl;
 	int i;
 
-	if (base->total >= inet_peer_threshold)
+	peer_threshold = READ_ONCE(inet_peer_threshold);
+	peer_maxttl = READ_ONCE(inet_peer_maxttl);
+	peer_minttl = READ_ONCE(inet_peer_minttl);
+
+	if (base->total >= peer_threshold)
 		ttl = 0; /* be aggressive */
 	else
-		ttl = inet_peer_maxttl
-				- (inet_peer_maxttl - inet_peer_minttl) / HZ *
-					base->total / inet_peer_threshold * HZ;
+		ttl = peer_maxttl - (peer_maxttl - peer_minttl) / HZ *
+			base->total / peer_threshold * HZ;
 	for (i = 0; i < gc_cnt; i++) {
 		p = gc_stack[i];
 
-- 
2.35.1

[PATCH 5.4 27/71] net: Fix data-races around sysctl_mem.

[Greg Kroah-Hartman]

From: Kuniyuki Iwashima <kuniyu@amazon.com>

[ Upstream commit 310731e2f1611d1d13aae237abcf8e66d33345d5 ]

While reading .sysctl_mem, it can be changed concurrently.
So, we need to add READ_ONCE() to avoid data-races.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/net/sock.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/include/net/sock.h b/include/net/sock.h
index 7f213cfcb3cc..9d687070d272 100644
--- a/include/net/sock.h
+++ b/include/net/sock.h
@@ -1400,7 +1400,7 @@ void __sk_mem_reclaim(struct sock *sk, int amount);
 /* sysctl_mem values are in pages, we convert them in SK_MEM_QUANTUM units */
 static inline long sk_prot_mem_limits(const struct sock *sk, int index)
 {
-	long val = sk->sk_prot->sysctl_mem[index];
+	long val = READ_ONCE(sk->sk_prot->sysctl_mem[index]);
 
 #if PAGE_SIZE > SK_MEM_QUANTUM
 	val <<= PAGE_SHIFT - SK_MEM_QUANTUM_SHIFT;
-- 
2.35.1

[PATCH 5.4 28/71] cipso: Fix data-races around sysctl.

[Greg Kroah-Hartman]

From: Kuniyuki Iwashima <kuniyu@amazon.com>

[ Upstream commit dd44f04b9214adb68ef5684ae87a81ba03632250 ]

While reading cipso sysctl variables, they can be changed concurrently.
So, we need to add READ_ONCE() to avoid data-races.

Fixes: 446fda4f2682 ("[NetLabel]: CIPSOv4 engine")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Acked-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 Documentation/networking/ip-sysctl.txt |  2 +-
 net/ipv4/cipso_ipv4.c                  | 12 +++++++-----
 2 files changed, 8 insertions(+), 6 deletions(-)

diff --git a/Documentation/networking/ip-sysctl.txt b/Documentation/networking/ip-sysctl.txt
index 8af3771a3ebf..f60d4159fff4 100644
--- a/Documentation/networking/ip-sysctl.txt
+++ b/Documentation/networking/ip-sysctl.txt
@@ -876,7 +876,7 @@ cipso_cache_enable - BOOLEAN
 cipso_cache_bucket_size - INTEGER
 	The CIPSO label cache consists of a fixed size hash table with each
 	hash bucket containing a number of cache entries.  This variable limits
-	the number of entries in each hash bucket; the larger the value the
+	the number of entries in each hash bucket; the larger the value is, the
 	more CIPSO label mappings that can be cached.  When the number of
 	entries in a given hash bucket reaches this limit adding new entries
 	causes the oldest entry in the bucket to be removed to make room.
diff --git a/net/ipv4/cipso_ipv4.c b/net/ipv4/cipso_ipv4.c
index c1ac802d6894..42eaad5e515f 100644
--- a/net/ipv4/cipso_ipv4.c
+++ b/net/ipv4/cipso_ipv4.c
@@ -240,7 +240,7 @@ static int cipso_v4_cache_check(const unsigned char *key,
 	struct cipso_v4_map_cache_entry *prev_entry = NULL;
 	u32 hash;
 
-	if (!cipso_v4_cache_enabled)
+	if (!READ_ONCE(cipso_v4_cache_enabled))
 		return -ENOENT;
 
 	hash = cipso_v4_map_cache_hash(key, key_len);
@@ -297,13 +297,14 @@ static int cipso_v4_cache_check(const unsigned char *key,
 int cipso_v4_cache_add(const unsigned char *cipso_ptr,
 		       const struct netlbl_lsm_secattr *secattr)
 {
+	int bkt_size = READ_ONCE(cipso_v4_cache_bucketsize);
 	int ret_val = -EPERM;
 	u32 bkt;
 	struct cipso_v4_map_cache_entry *entry = NULL;
 	struct cipso_v4_map_cache_entry *old_entry = NULL;
 	u32 cipso_ptr_len;
 
-	if (!cipso_v4_cache_enabled || cipso_v4_cache_bucketsize <= 0)
+	if (!READ_ONCE(cipso_v4_cache_enabled) || bkt_size <= 0)
 		return 0;
 
 	cipso_ptr_len = cipso_ptr[1];
@@ -323,7 +324,7 @@ int cipso_v4_cache_add(const unsigned char *cipso_ptr,
 
 	bkt = entry->hash & (CIPSO_V4_CACHE_BUCKETS - 1);
 	spin_lock_bh(&cipso_v4_cache[bkt].lock);
-	if (cipso_v4_cache[bkt].size < cipso_v4_cache_bucketsize) {
+	if (cipso_v4_cache[bkt].size < bkt_size) {
 		list_add(&entry->list, &cipso_v4_cache[bkt].list);
 		cipso_v4_cache[bkt].size += 1;
 	} else {
@@ -1200,7 +1201,8 @@ static int cipso_v4_gentag_rbm(const struct cipso_v4_doi *doi_def,
 		/* This will send packets using the "optimized" format when
 		 * possible as specified in  section 3.4.2.6 of the
 		 * CIPSO draft. */
-		if (cipso_v4_rbm_optfmt && ret_val > 0 && ret_val <= 10)
+		if (READ_ONCE(cipso_v4_rbm_optfmt) && ret_val > 0 &&
+		    ret_val <= 10)
 			tag_len = 14;
 		else
 			tag_len = 4 + ret_val;
@@ -1603,7 +1605,7 @@ int cipso_v4_validate(const struct sk_buff *skb, unsigned char **option)
 			 * all the CIPSO validations here but it doesn't
 			 * really specify _exactly_ what we need to validate
 			 * ... so, just make it a sysctl tunable. */
-			if (cipso_v4_rbm_strictvalid) {
+			if (READ_ONCE(cipso_v4_rbm_strictvalid)) {
 				if (cipso_v4_map_lvl_valid(doi_def,
 							   tag[3]) < 0) {
 					err_offset = opt_iter + 3;
-- 
2.35.1

[PATCH 5.4 29/71] icmp: Fix data-races around sysctl.

[Greg Kroah-Hartman]

From: Kuniyuki Iwashima <kuniyu@amazon.com>

[ Upstream commit 48d7ee321ea5182c6a70782aa186422a70e67e22 ]

While reading icmp sysctl variables, they can be changed concurrently.
So, we need to add READ_ONCE() to avoid data-races.

Fixes: 4cdf507d5452 ("icmp: add a global rate limitation")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ipv4/icmp.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/net/ipv4/icmp.c b/net/ipv4/icmp.c
index f86f948a4b4c..a590ff81e5f8 100644
--- a/net/ipv4/icmp.c
+++ b/net/ipv4/icmp.c
@@ -261,11 +261,12 @@ bool icmp_global_allow(void)
 	spin_lock(&icmp_global.lock);
 	delta = min_t(u32, now - icmp_global.stamp, HZ);
 	if (delta >= HZ / 50) {
-		incr = sysctl_icmp_msgs_per_sec * delta / HZ ;
+		incr = READ_ONCE(sysctl_icmp_msgs_per_sec) * delta / HZ;
 		if (incr)
 			WRITE_ONCE(icmp_global.stamp, now);
 	}
-	credit = min_t(u32, icmp_global.credit + incr, sysctl_icmp_msgs_burst);
+	credit = min_t(u32, icmp_global.credit + incr,
+		       READ_ONCE(sysctl_icmp_msgs_burst));
 	if (credit) {
 		/* We want to use a credit of one in average, but need to randomize
 		 * it for security reasons.
-- 
2.35.1

[PATCH 5.4 30/71] ipv4: Fix a data-race around sysctl_fib_sync_mem.

[Greg Kroah-Hartman]

From: Kuniyuki Iwashima <kuniyu@amazon.com>

[ Upstream commit 73318c4b7dbd0e781aaababff17376b2894745c0 ]

While reading sysctl_fib_sync_mem, it can be changed concurrently.
So, we need to add READ_ONCE() to avoid a data-race.

Fixes: 9ab948a91b2c ("ipv4: Allow amount of dirty memory from fib resizing to be controllable")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ipv4/fib_trie.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/ipv4/fib_trie.c b/net/ipv4/fib_trie.c
index 51673d00bbea..a1f830da4ad3 100644
--- a/net/ipv4/fib_trie.c
+++ b/net/ipv4/fib_trie.c
@@ -500,7 +500,7 @@ static void tnode_free(struct key_vector *tn)
 		tn = container_of(head, struct tnode, rcu)->kv;
 	}
 
-	if (tnode_free_size >= sysctl_fib_sync_mem) {
+	if (tnode_free_size >= READ_ONCE(sysctl_fib_sync_mem)) {
 		tnode_free_size = 0;
 		synchronize_rcu();
 	}
-- 
2.35.1

[PATCH 5.4 31/71] ARM: dts: at91: sama5d2: Fix typo in i2s1 node

[Greg Kroah-Hartman]

From: Ryan Wanner <Ryan.Wanner@microchip.com>

[ Upstream commit 2fdf15b50a46e366740df4cccbe2343269b4ff55 ]

Fix typo in i2s1 causing errors in dt binding validation.
Change assigned-parrents to assigned-clock-parents
to match i2s0 node formatting.

Fixes: 1ca81883c557 ("ARM: dts: at91: sama5d2: add nodes for I2S controllers")
Signed-off-by: Ryan Wanner <Ryan.Wanner@microchip.com>
[claudiu.beznea: use imperative addressing in commit description, remove
 blank line after fixes tag, fix typo in commit message]
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20220707215812.193008-1-Ryan.Wanner@microchip.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/sama5d2.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/sama5d2.dtsi
index 09816a2ee367..dbfdffd54003 100644
--- a/arch/arm/boot/dts/sama5d2.dtsi
+++ b/arch/arm/boot/dts/sama5d2.dtsi
@@ -933,7 +933,7 @@ AT91_XDMAC_DT_PERID(33))>,
 				clocks = <&pmc PMC_TYPE_PERIPHERAL 55>, <&pmc PMC_TYPE_GCK 55>;
 				clock-names = "pclk", "gclk";
 				assigned-clocks = <&pmc PMC_TYPE_CORE PMC_I2S1_MUX>;
-				assigned-parrents = <&pmc PMC_TYPE_GCK 55>;
+				assigned-clock-parents = <&pmc PMC_TYPE_GCK 55>;
 				status = "disabled";
 			};
 
-- 
2.35.1

[PATCH 5.4 32/71] ARM: dts: sunxi: Fix SPI NOR campatible on Orange Pi Zero

[Greg Kroah-Hartman]

From: Michal Suchanek <msuchanek@suse.de>

[ Upstream commit 884b66976a7279ee889ba885fe364244d50b79e7 ]

The device tree should include generic "jedec,spi-nor" compatible, and a
manufacturer-specific one.
The macronix part is what is shipped on the boards that come with a
flash chip.

Fixes: 45857ae95478 ("ARM: dts: orange-pi-zero: add node for SPI NOR")
Signed-off-by: Michal Suchanek <msuchanek@suse.de>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20220708174529.3360-1-msuchanek@suse.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts b/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts
index f19ed981da9d..3706216ffb40 100644
--- a/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts
+++ b/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts
@@ -169,7 +169,7 @@ &spi0 {
 	flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "mxicy,mx25l1606e", "winbond,w25q128";
+		compatible = "mxicy,mx25l1606e", "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <40000000>;
 	};
-- 
2.35.1

[PATCH 5.4 33/71] drm/i915/gt: Serialize TLB invalidates with GT resets

[Greg Kroah-Hartman]

From: Chris Wilson <chris.p.wilson@intel.com>

[ Upstream commit a1c5a7bf79c1faa5633b918b5c0666545e84c4d1 ]

Avoid trying to invalidate the TLB in the middle of performing an
engine reset, as this may result in the reset timing out. Currently,
the TLB invalidate is only serialised by its own mutex, forgoing the
uncore lock, but we can take the uncore->lock as well to serialise
the mmio access, thereby serialising with the GDRST.

Tested on a NUC5i7RYB, BIOS RYBDWi35.86A.0380.2019.0517.1530 with
i915 selftest/hangcheck.

Cc: stable@vger.kernel.org  # v4.4 and upper
Fixes: 7938d61591d3 ("drm/i915: Flush TLBs before releasing backing store")
Reported-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Tested-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Reviewed-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Chris Wilson <chris.p.wilson@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Acked-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1e59a7c45dd919a530256b9ac721ac6ea86c0677.1657639152.git.mchehab@kernel.org
(cherry picked from commit 33da97894758737895e90c909f16786052680ef4)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/i915/gt/intel_gt.c | 15 ++++++++++++++-
 1 file changed, 14 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/i915/gt/intel_gt.c b/drivers/gpu/drm/i915/gt/intel_gt.c
index c8c070375d29..f6d7f5d307d7 100644
--- a/drivers/gpu/drm/i915/gt/intel_gt.c
+++ b/drivers/gpu/drm/i915/gt/intel_gt.c
@@ -339,6 +339,20 @@ void intel_gt_invalidate_tlbs(struct intel_gt *gt)
 	mutex_lock(&gt->tlb_invalidate_lock);
 	intel_uncore_forcewake_get(uncore, FORCEWAKE_ALL);
 
+	spin_lock_irq(&uncore->lock); /* serialise invalidate with GT reset */
+
+	for_each_engine(engine, gt, id) {
+		struct reg_and_bit rb;
+
+		rb = get_reg_and_bit(engine, regs == gen8_regs, regs, num);
+		if (!i915_mmio_reg_offset(rb.reg))
+			continue;
+
+		intel_uncore_write_fw(uncore, rb.reg, rb.bit);
+	}
+
+	spin_unlock_irq(&uncore->lock);
+
 	for_each_engine(engine, gt, id) {
 		/*
 		 * HW architecture suggest typical invalidation time at 40us,
@@ -353,7 +367,6 @@ void intel_gt_invalidate_tlbs(struct intel_gt *gt)
 		if (!i915_mmio_reg_offset(rb.reg))
 			continue;
 
-		intel_uncore_write_fw(uncore, rb.reg, rb.bit);
 		if (__intel_wait_for_register_fw(uncore,
 						 rb.reg, rb.bit, 0,
 						 timeout_us, timeout_ms,
-- 
2.35.1

[PATCH 5.4 34/71] icmp: Fix a data-race around sysctl_icmp_ratelimit.

[Greg Kroah-Hartman]

From: Kuniyuki Iwashima <kuniyu@amazon.com>

[ Upstream commit 2a4eb714841f288cf51c7d942d98af6a8c6e4b01 ]

While reading sysctl_icmp_ratelimit, it can be changed concurrently.
Thus, we need to add READ_ONCE() to its reader.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ipv4/icmp.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/net/ipv4/icmp.c b/net/ipv4/icmp.c
index a590ff81e5f8..e05e972445fe 100644
--- a/net/ipv4/icmp.c
+++ b/net/ipv4/icmp.c
@@ -328,7 +328,8 @@ static bool icmpv4_xrlim_allow(struct net *net, struct rtable *rt,
 
 	vif = l3mdev_master_ifindex(dst->dev);
 	peer = inet_getpeer_v4(net->ipv4.peers, fl4->daddr, vif, 1);
-	rc = inet_peer_xrlim_allow(peer, net->ipv4.sysctl_icmp_ratelimit);
+	rc = inet_peer_xrlim_allow(peer,
+				   READ_ONCE(net->ipv4.sysctl_icmp_ratelimit));
 	if (peer)
 		inet_putpeer(peer);
 out:
-- 
2.35.1

[PATCH 5.4 35/71] icmp: Fix a data-race around sysctl_icmp_ratemask.

[Greg Kroah-Hartman]

From: Kuniyuki Iwashima <kuniyu@amazon.com>

[ Upstream commit 1ebcb25ad6fc3d50fca87350acf451b9a66dd31e ]

While reading sysctl_icmp_ratemask, it can be changed concurrently.
Thus, we need to add READ_ONCE() to its reader.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ipv4/icmp.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/ipv4/icmp.c b/net/ipv4/icmp.c
index e05e972445fe..9bc01411be4c 100644
--- a/net/ipv4/icmp.c
+++ b/net/ipv4/icmp.c
@@ -290,7 +290,7 @@ static bool icmpv4_mask_allow(struct net *net, int type, int code)
 		return true;
 
 	/* Limit if icmp type is enabled in ratemask. */
-	if (!((1 << type) & net->ipv4.sysctl_icmp_ratemask))
+	if (!((1 << type) & READ_ONCE(net->ipv4.sysctl_icmp_ratemask)))
 		return true;
 
 	return false;
-- 
2.35.1

[PATCH 5.4 36/71] raw: Fix a data-race around sysctl_raw_l3mdev_accept.

[Greg Kroah-Hartman]

From: Kuniyuki Iwashima <kuniyu@amazon.com>

[ Upstream commit 1dace014928e6e385363032d359a04dee9158af0 ]

While reading sysctl_raw_l3mdev_accept, it can be changed concurrently.
Thus, we need to add READ_ONCE() to its reader.

Fixes: 6897445fb194 ("net: provide a sysctl raw_l3mdev_accept for raw socket lookup with VRFs")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/net/raw.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/include/net/raw.h b/include/net/raw.h
index 8ad8df594853..c51a635671a7 100644
--- a/include/net/raw.h
+++ b/include/net/raw.h
@@ -75,7 +75,7 @@ static inline bool raw_sk_bound_dev_eq(struct net *net, int bound_dev_if,
 				       int dif, int sdif)
 {
 #if IS_ENABLED(CONFIG_NET_L3_MASTER_DEV)
-	return inet_bound_dev_eq(!!net->ipv4.sysctl_raw_l3mdev_accept,
+	return inet_bound_dev_eq(READ_ONCE(net->ipv4.sysctl_raw_l3mdev_accept),
 				 bound_dev_if, dif, sdif);
 #else
 	return inet_bound_dev_eq(true, bound_dev_if, dif, sdif);
-- 
2.35.1

[PATCH 5.4 37/71] ipv4: Fix data-races around sysctl_ip_dynaddr.

[Greg Kroah-Hartman]

From: Kuniyuki Iwashima <kuniyu@amazon.com>

[ Upstream commit e49e4aff7ec19b2d0d0957ee30e93dade57dab9e ]

While reading sysctl_ip_dynaddr, it can be changed concurrently.
Thus, we need to add READ_ONCE() to its readers.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 Documentation/networking/ip-sysctl.txt | 2 +-
 net/ipv4/af_inet.c                     | 4 ++--
 2 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/Documentation/networking/ip-sysctl.txt b/Documentation/networking/ip-sysctl.txt
index f60d4159fff4..787a9c077ef1 100644
--- a/Documentation/networking/ip-sysctl.txt
+++ b/Documentation/networking/ip-sysctl.txt
@@ -953,7 +953,7 @@ ip_nonlocal_bind - BOOLEAN
 	which can be quite useful - but may break some applications.
 	Default: 0
 
-ip_dynaddr - BOOLEAN
+ip_dynaddr - INTEGER
 	If set non-zero, enables support for dynamic addresses.
 	If set to a non-zero value larger than 1, a kernel log
 	message will be printed when dynamic address rewriting
diff --git a/net/ipv4/af_inet.c b/net/ipv4/af_inet.c
index a7a6b1adb698..9ab73fcc7411 100644
--- a/net/ipv4/af_inet.c
+++ b/net/ipv4/af_inet.c
@@ -1215,7 +1215,7 @@ static int inet_sk_reselect_saddr(struct sock *sk)
 	if (new_saddr == old_saddr)
 		return 0;
 
-	if (sock_net(sk)->ipv4.sysctl_ip_dynaddr > 1) {
+	if (READ_ONCE(sock_net(sk)->ipv4.sysctl_ip_dynaddr) > 1) {
 		pr_info("%s(): shifting inet->saddr from %pI4 to %pI4\n",
 			__func__, &old_saddr, &new_saddr);
 	}
@@ -1270,7 +1270,7 @@ int inet_sk_rebuild_header(struct sock *sk)
 		 * Other protocols have to map its equivalent state to TCP_SYN_SENT.
 		 * DCCP maps its DCCP_REQUESTING state to TCP_SYN_SENT. -acme
 		 */
-		if (!sock_net(sk)->ipv4.sysctl_ip_dynaddr ||
+		if (!READ_ONCE(sock_net(sk)->ipv4.sysctl_ip_dynaddr) ||
 		    sk->sk_state != TCP_SYN_SENT ||
 		    (sk->sk_userlocks & SOCK_BINDADDR_LOCK) ||
 		    (err = inet_sk_reselect_saddr(sk)) != 0)
-- 
2.35.1

[PATCH 5.4 38/71] net: ftgmac100: Hold reference returned by of_get_child_by_name()

[Greg Kroah-Hartman]

From: Liang He <windhl@126.com>

[ Upstream commit 49b9f431ff0d845a36be0b3ede35ec324f2e5fee ]

In ftgmac100_probe(), we should hold the refernece returned by
of_get_child_by_name() and use it to call of_node_put() for
reference balance.

Fixes: 39bfab8844a0 ("net: ftgmac100: Add support for DT phy-handle property")
Signed-off-by: Liang He <windhl@126.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/faraday/ftgmac100.c | 15 ++++++++++++++-
 1 file changed, 14 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/faraday/ftgmac100.c b/drivers/net/ethernet/faraday/ftgmac100.c
index d7478d332820..98e94d914597 100644
--- a/drivers/net/ethernet/faraday/ftgmac100.c
+++ b/drivers/net/ethernet/faraday/ftgmac100.c
@@ -1734,6 +1734,19 @@ static void ftgmac100_setup_clk(struct ftgmac100 *priv)
 			FTGMAC_100MHZ);
 }
 
+static bool ftgmac100_has_child_node(struct device_node *np, const char *name)
+{
+	struct device_node *child_np = of_get_child_by_name(np, name);
+	bool ret = false;
+
+	if (child_np) {
+		ret = true;
+		of_node_put(child_np);
+	}
+
+	return ret;
+}
+
 static int ftgmac100_probe(struct platform_device *pdev)
 {
 	struct resource *res;
@@ -1850,7 +1863,7 @@ static int ftgmac100_probe(struct platform_device *pdev)
 
 		/* Display what we found */
 		phy_attached_info(phy);
-	} else if (np && !of_get_child_by_name(np, "mdio")) {
+	} else if (np && !ftgmac100_has_child_node(np, "mdio")) {
 		/* Support legacy ASPEED devicetree descriptions that decribe a
 		 * MAC with an embedded MDIO controller but have no "mdio"
 		 * child node. Automatically scan the MDIO bus for available
-- 
2.35.1

[PATCH 5.4 39/71] sfc: fix use after free when disabling sriov

[Greg Kroah-Hartman]

From: Íñigo Huguet <ihuguet@redhat.com>

[ Upstream commit ebe41da5d47ac0fff877e57bd14c54dccf168827 ]

Use after free is detected by kfence when disabling sriov. What was read
after being freed was vf->pci_dev: it was freed from pci_disable_sriov
and later read in efx_ef10_sriov_free_vf_vports, called from
efx_ef10_sriov_free_vf_vswitching.

Set the pointer to NULL at release time to not trying to read it later.

Reproducer and dmesg log (note that kfence doesn't detect it every time):
$ echo 1 > /sys/class/net/enp65s0f0np0/device/sriov_numvfs
$ echo 0 > /sys/class/net/enp65s0f0np0/device/sriov_numvfs

 BUG: KFENCE: use-after-free read in efx_ef10_sriov_free_vf_vswitching+0x82/0x170 [sfc]

 Use-after-free read at 0x00000000ff3c1ba5 (in kfence-#224):
  efx_ef10_sriov_free_vf_vswitching+0x82/0x170 [sfc]
  efx_ef10_pci_sriov_disable+0x38/0x70 [sfc]
  efx_pci_sriov_configure+0x24/0x40 [sfc]
  sriov_numvfs_store+0xfe/0x140
  kernfs_fop_write_iter+0x11c/0x1b0
  new_sync_write+0x11f/0x1b0
  vfs_write+0x1eb/0x280
  ksys_write+0x5f/0xe0
  do_syscall_64+0x5c/0x80
  entry_SYSCALL_64_after_hwframe+0x44/0xae

 kfence-#224: 0x00000000edb8ef95-0x00000000671f5ce1, size=2792, cache=kmalloc-4k

 allocated by task 6771 on cpu 10 at 3137.860196s:
  pci_alloc_dev+0x21/0x60
  pci_iov_add_virtfn+0x2a2/0x320
  sriov_enable+0x212/0x3e0
  efx_ef10_sriov_configure+0x67/0x80 [sfc]
  efx_pci_sriov_configure+0x24/0x40 [sfc]
  sriov_numvfs_store+0xba/0x140
  kernfs_fop_write_iter+0x11c/0x1b0
  new_sync_write+0x11f/0x1b0
  vfs_write+0x1eb/0x280
  ksys_write+0x5f/0xe0
  do_syscall_64+0x5c/0x80
  entry_SYSCALL_64_after_hwframe+0x44/0xae

 freed by task 6771 on cpu 12 at 3170.991309s:
  device_release+0x34/0x90
  kobject_cleanup+0x3a/0x130
  pci_iov_remove_virtfn+0xd9/0x120
  sriov_disable+0x30/0xe0
  efx_ef10_pci_sriov_disable+0x57/0x70 [sfc]
  efx_pci_sriov_configure+0x24/0x40 [sfc]
  sriov_numvfs_store+0xfe/0x140
  kernfs_fop_write_iter+0x11c/0x1b0
  new_sync_write+0x11f/0x1b0
  vfs_write+0x1eb/0x280
  ksys_write+0x5f/0xe0
  do_syscall_64+0x5c/0x80
  entry_SYSCALL_64_after_hwframe+0x44/0xae

Fixes: 3c5eb87605e85 ("sfc: create vports for VFs and assign random MAC addresses")
Reported-by: Yanghang Liu <yanghliu@redhat.com>
Signed-off-by: Íñigo Huguet <ihuguet@redhat.com>
Acked-by: Martin Habets <habetsm.xilinx@gmail.com>
Link: https://lore.kernel.org/r/20220712062642.6915-1-ihuguet@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/sfc/ef10_sriov.c | 10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/sfc/ef10_sriov.c b/drivers/net/ethernet/sfc/ef10_sriov.c
index e7c6aa29d323..b318ce83f5bf 100644
--- a/drivers/net/ethernet/sfc/ef10_sriov.c
+++ b/drivers/net/ethernet/sfc/ef10_sriov.c
@@ -412,8 +412,9 @@ static int efx_ef10_pci_sriov_enable(struct efx_nic *efx, int num_vfs)
 static int efx_ef10_pci_sriov_disable(struct efx_nic *efx, bool force)
 {
 	struct pci_dev *dev = efx->pci_dev;
+	struct efx_ef10_nic_data *nic_data = efx->nic_data;
 	unsigned int vfs_assigned = pci_vfs_assigned(dev);
-	int rc = 0;
+	int i, rc = 0;
 
 	if (vfs_assigned && !force) {
 		netif_info(efx, drv, efx->net_dev, "VFs are assigned to guests; "
@@ -421,10 +422,13 @@ static int efx_ef10_pci_sriov_disable(struct efx_nic *efx, bool force)
 		return -EBUSY;
 	}
 
-	if (!vfs_assigned)
+	if (!vfs_assigned) {
+		for (i = 0; i < efx->vf_count; i++)
+			nic_data->vf[i].pci_dev = NULL;
 		pci_disable_sriov(dev);
-	else
+	} else {
 		rc = -EBUSY;
+	}
 
 	efx_ef10_sriov_free_vf_vswitching(efx);
 	efx->vf_count = 0;
-- 
2.35.1

[PATCH 5.4 40/71] seg6: fix skb checksum evaluation in SRH encapsulation/insertion

[Greg Kroah-Hartman]

From: Andrea Mayer <andrea.mayer@uniroma2.it>

[ Upstream commit df8386d13ea280d55beee1b95f61a59234a3798b ]

Support for SRH encapsulation and insertion was introduced with
commit 6c8702c60b88 ("ipv6: sr: add support for SRH encapsulation and
injection with lwtunnels"), through the seg6_do_srh_encap() and
seg6_do_srh_inline() functions, respectively.
The former encapsulates the packet in an outer IPv6 header along with
the SRH, while the latter inserts the SRH between the IPv6 header and
the payload. Then, the headers are initialized/updated according to the
operating mode (i.e., encap/inline).
Finally, the skb checksum is calculated to reflect the changes applied
to the headers.

The IPv6 payload length ('payload_len') is not initialized
within seg6_do_srh_{inline,encap}() but is deferred in seg6_do_srh(), i.e.
the caller of seg6_do_srh_{inline,encap}().
However, this operation invalidates the skb checksum, since the
'payload_len' is updated only after the checksum is evaluated.

To solve this issue, the initialization of the IPv6 payload length is
moved from seg6_do_srh() directly into the seg6_do_srh_{inline,encap}()
functions and before the skb checksum update takes place.

Fixes: 6c8702c60b88 ("ipv6: sr: add support for SRH encapsulation and injection with lwtunnels")
Reported-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/all/20220705190727.69d532417be7438b15404ee1@uniroma2.it
Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ipv6/seg6_iptunnel.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/net/ipv6/seg6_iptunnel.c b/net/ipv6/seg6_iptunnel.c
index 6954db1fd26e..b626e0b62a54 100644
--- a/net/ipv6/seg6_iptunnel.c
+++ b/net/ipv6/seg6_iptunnel.c
@@ -171,6 +171,8 @@ int seg6_do_srh_encap(struct sk_buff *skb, struct ipv6_sr_hdr *osrh, int proto)
 	}
 #endif
 
+	hdr->payload_len = htons(skb->len - sizeof(struct ipv6hdr));
+
 	skb_postpush_rcsum(skb, hdr, tot_len);
 
 	return 0;
@@ -223,6 +225,8 @@ int seg6_do_srh_inline(struct sk_buff *skb, struct ipv6_sr_hdr *osrh)
 	}
 #endif
 
+	hdr->payload_len = htons(skb->len - sizeof(struct ipv6hdr));
+
 	skb_postpush_rcsum(skb, hdr, sizeof(struct ipv6hdr) + hdrlen);
 
 	return 0;
@@ -284,7 +288,6 @@ static int seg6_do_srh(struct sk_buff *skb)
 		break;
 	}
 
-	ipv6_hdr(skb)->payload_len = htons(skb->len - sizeof(struct ipv6hdr));
 	skb_set_transport_header(skb, sizeof(struct ipv6hdr));
 
 	return 0;
-- 
2.35.1

[PATCH 5.4 41/71] seg6: fix skb checksum in SRv6 End.B6 and End.B6.Encaps behaviors

[Greg Kroah-Hartman]

From: Andrea Mayer <andrea.mayer@uniroma2.it>

[ Upstream commit f048880fc77058d864aff5c674af7918b30f312a ]

The SRv6 End.B6 and End.B6.Encaps behaviors rely on functions
seg6_do_srh_{encap,inline}() to, respectively: i) encapsulate the
packet within an outer IPv6 header with the specified Segment Routing
Header (SRH); ii) insert the specified SRH directly after the IPv6
header of the packet.

This patch removes the initialization of the IPv6 header payload length
from the input_action_end_b6{_encap}() functions, as it is now handled
properly by seg6_do_srh_{encap,inline}() to avoid corruption of the skb
checksum.

Fixes: 140f04c33bbc ("ipv6: sr: implement several seg6local actions")
Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ipv6/seg6_local.c | 2 --
 1 file changed, 2 deletions(-)

diff --git a/net/ipv6/seg6_local.c b/net/ipv6/seg6_local.c
index 802eebf8ac4b..ef5b5cee2201 100644
--- a/net/ipv6/seg6_local.c
+++ b/net/ipv6/seg6_local.c
@@ -421,7 +421,6 @@ static int input_action_end_b6(struct sk_buff *skb, struct seg6_local_lwt *slwt)
 	if (err)
 		goto drop;
 
-	ipv6_hdr(skb)->payload_len = htons(skb->len - sizeof(struct ipv6hdr));
 	skb_set_transport_header(skb, sizeof(struct ipv6hdr));
 
 	seg6_lookup_nexthop(skb, NULL, 0);
@@ -453,7 +452,6 @@ static int input_action_end_b6_encap(struct sk_buff *skb,
 	if (err)
 		goto drop;
 
-	ipv6_hdr(skb)->payload_len = htons(skb->len - sizeof(struct ipv6hdr));
 	skb_set_transport_header(skb, sizeof(struct ipv6hdr));
 
 	seg6_lookup_nexthop(skb, NULL, 0);
-- 
2.35.1

[PATCH 5.4 42/71] seg6: bpf: fix skb checksum in bpf_push_seg6_encap()

[Greg Kroah-Hartman]

From: Andrea Mayer <andrea.mayer@uniroma2.it>

[ Upstream commit 4889fbd98deaf243c3baadc54e296d71c6af1eb0 ]

Both helper functions bpf_lwt_seg6_action() and bpf_lwt_push_encap() use
the bpf_push_seg6_encap() to encapsulate the packet in an IPv6 with Segment
Routing Header (SRH) or insert an SRH between the IPv6 header and the
payload.
To achieve this result, such helper functions rely on bpf_push_seg6_encap()
which, in turn, leverages seg6_do_srh_{encap,inline}() to perform the
required operation (i.e. encap/inline).

This patch removes the initialization of the IPv6 header payload length
from bpf_push_seg6_encap(), as it is now handled properly by
seg6_do_srh_{encap,inline}() to prevent corruption of the skb checksum.

Fixes: fe94cc290f53 ("bpf: Add IPv6 Segment Routing helpers")
Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/core/filter.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/net/core/filter.c b/net/core/filter.c
index eba96343c7af..75f53b5e6389 100644
--- a/net/core/filter.c
+++ b/net/core/filter.c
@@ -4955,7 +4955,6 @@ static int bpf_push_seg6_encap(struct sk_buff *skb, u32 type, void *hdr, u32 len
 	if (err)
 		return err;
 
-	ipv6_hdr(skb)->payload_len = htons(skb->len - sizeof(struct ipv6hdr));
 	skb_set_transport_header(skb, sizeof(struct ipv6hdr));
 
 	return seg6_lookup_nexthop(skb, NULL, 0);
-- 
2.35.1

[PATCH 5.4 43/71] sfc: fix kernel panic when creating VF

[Greg Kroah-Hartman]

From: Íñigo Huguet <ihuguet@redhat.com>

[ Upstream commit ada74c5539eba06cf8b47d068f92e0b3963a9a6e ]

When creating VFs a kernel panic can happen when calling to
efx_ef10_try_update_nic_stats_vf.

When releasing a DMA coherent buffer, sometimes, I don't know in what
specific circumstances, it has to unmap memory with vunmap. It is
disallowed to do that in IRQ context or with BH disabled. Otherwise, we
hit this line in vunmap, causing the crash:
  BUG_ON(in_interrupt());

This patch reenables BH to release the buffer.

Log messages when the bug is hit:
 kernel BUG at mm/vmalloc.c:2727!
 invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
 CPU: 6 PID: 1462 Comm: NetworkManager Kdump: loaded Tainted: G          I      --------- ---  5.14.0-119.el9.x86_64 #1
 Hardware name: Dell Inc. PowerEdge R740/06WXJT, BIOS 2.8.2 08/27/2020
 RIP: 0010:vunmap+0x2e/0x30
 ...skip...
 Call Trace:
  __iommu_dma_free+0x96/0x100
  efx_nic_free_buffer+0x2b/0x40 [sfc]
  efx_ef10_try_update_nic_stats_vf+0x14a/0x1c0 [sfc]
  efx_ef10_update_stats_vf+0x18/0x40 [sfc]
  efx_start_all+0x15e/0x1d0 [sfc]
  efx_net_open+0x5a/0xe0 [sfc]
  __dev_open+0xe7/0x1a0
  __dev_change_flags+0x1d7/0x240
  dev_change_flags+0x21/0x60
  ...skip...

Fixes: d778819609a2 ("sfc: DMA the VF stats only when requested")
Reported-by: Ma Yuying <yuma@redhat.com>
Signed-off-by: Íñigo Huguet <ihuguet@redhat.com>
Acked-by: Edward Cree <ecree.xilinx@gmail.com>
Link: https://lore.kernel.org/r/20220713092116.21238-1-ihuguet@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/sfc/ef10.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/net/ethernet/sfc/ef10.c b/drivers/net/ethernet/sfc/ef10.c
index 936e64dd81b5..b23741d3c9be 100644
--- a/drivers/net/ethernet/sfc/ef10.c
+++ b/drivers/net/ethernet/sfc/ef10.c
@@ -2056,7 +2056,10 @@ static int efx_ef10_try_update_nic_stats_vf(struct efx_nic *efx)
 
 	efx_update_sw_stats(efx, stats);
 out:
+	/* releasing a DMA coherent buffer with BH disabled can panic */
+	spin_unlock_bh(&efx->stats_lock);
 	efx_nic_free_buffer(efx, &stats_buf);
+	spin_lock_bh(&efx->stats_lock);
 	return rc;
 }
 
-- 
2.35.1

[PATCH 5.4 44/71] mm: sysctl: fix missing numa_stat when !CONFIG_HUGETLB_PAGE

[Greg Kroah-Hartman]

From: Muchun Song <songmuchun@bytedance.com>

[ Upstream commit 43b5240ca6b33108998810593248186b1e3ae34a ]

"numa_stat" should not be included in the scope of CONFIG_HUGETLB_PAGE, if
CONFIG_HUGETLB_PAGE is not configured even if CONFIG_NUMA is configured,
"numa_stat" is missed form /proc. Move it out of CONFIG_HUGETLB_PAGE to
fix it.

Fixes: 4518085e127d ("mm, sysctl: make NUMA stats configurable")
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Cc: <stable@vger.kernel.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/sysctl.c | 20 +++++++++++---------
 1 file changed, 11 insertions(+), 9 deletions(-)

diff --git a/kernel/sysctl.c b/kernel/sysctl.c
index 0457d36540e3..6f971807bf79 100644
--- a/kernel/sysctl.c
+++ b/kernel/sysctl.c
@@ -1443,6 +1443,17 @@ static struct ctl_table vm_table[] = {
 		.extra1		= SYSCTL_ZERO,
 		.extra2		= &one_hundred,
 	},
+#ifdef CONFIG_NUMA
+	{
+		.procname	= "numa_stat",
+		.data		= &sysctl_vm_numa_stat,
+		.maxlen		= sizeof(int),
+		.mode		= 0644,
+		.proc_handler	= sysctl_vm_numa_stat_handler,
+		.extra1		= SYSCTL_ZERO,
+		.extra2		= SYSCTL_ONE,
+	},
+#endif
 #ifdef CONFIG_HUGETLB_PAGE
 	{
 		.procname	= "nr_hugepages",
@@ -1459,15 +1470,6 @@ static struct ctl_table vm_table[] = {
 		.mode           = 0644,
 		.proc_handler   = &hugetlb_mempolicy_sysctl_handler,
 	},
-	{
-		.procname		= "numa_stat",
-		.data			= &sysctl_vm_numa_stat,
-		.maxlen			= sizeof(int),
-		.mode			= 0644,
-		.proc_handler	= sysctl_vm_numa_stat_handler,
-		.extra1			= SYSCTL_ZERO,
-		.extra2			= SYSCTL_ONE,
-	},
 #endif
 	 {
 		.procname	= "hugetlb_shm_group",
-- 
2.35.1

[PATCH 5.4 45/71] virtio_mmio: Add missing PM calls to freeze/restore

[Greg Kroah-Hartman]

From: Stephan Gerhold <stephan.gerhold@kernkonzept.com>

[ Upstream commit ed7ac37fde33ccd84e4bd2b9363c191f925364c7 ]

Most virtio drivers provide freeze/restore callbacks to finish up
device usage before suspend and to reinitialize the virtio device after
resume. However, these callbacks are currently only called when using
virtio_pci. virtio_mmio does not have any PM ops defined.

This causes problems for example after suspend to disk (hibernation),
since the virtio devices might lose their state after the VMM is
restarted. Calling virtio_device_freeze()/restore() ensures that
the virtio devices are re-initialized correctly.

Fix this by implementing the dev_pm_ops for virtio_mmio,
similar to virtio_pci_common.

Signed-off-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com>
Message-Id: <20220621110621.3638025-2-stephan.gerhold@kernkonzept.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/virtio/virtio_mmio.c | 23 +++++++++++++++++++++++
 1 file changed, 23 insertions(+)

diff --git a/drivers/virtio/virtio_mmio.c b/drivers/virtio/virtio_mmio.c
index 74547323aa83..2a2d817caeff 100644
--- a/drivers/virtio/virtio_mmio.c
+++ b/drivers/virtio/virtio_mmio.c
@@ -62,6 +62,7 @@
 #include <linux/list.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
+#include <linux/pm.h>
 #include <linux/slab.h>
 #include <linux/spinlock.h>
 #include <linux/virtio.h>
@@ -514,6 +515,25 @@ static const struct virtio_config_ops virtio_mmio_config_ops = {
 	.bus_name	= vm_bus_name,
 };
 
+#ifdef CONFIG_PM_SLEEP
+static int virtio_mmio_freeze(struct device *dev)
+{
+	struct virtio_mmio_device *vm_dev = dev_get_drvdata(dev);
+
+	return virtio_device_freeze(&vm_dev->vdev);
+}
+
+static int virtio_mmio_restore(struct device *dev)
+{
+	struct virtio_mmio_device *vm_dev = dev_get_drvdata(dev);
+
+	return virtio_device_restore(&vm_dev->vdev);
+}
+
+static const struct dev_pm_ops virtio_mmio_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(virtio_mmio_freeze, virtio_mmio_restore)
+};
+#endif
 
 static void virtio_mmio_release_dev(struct device *_d)
 {
@@ -767,6 +787,9 @@ static struct platform_driver virtio_mmio_driver = {
 		.name	= "virtio-mmio",
 		.of_match_table	= virtio_mmio_match,
 		.acpi_match_table = ACPI_PTR(virtio_mmio_acpi_match),
+#ifdef CONFIG_PM_SLEEP
+		.pm	= &virtio_mmio_pm_ops,
+#endif
 	},
 };
 
-- 
2.35.1

[PATCH 5.4 46/71] virtio_mmio: Restore guest page size on resume

[Greg Kroah-Hartman]

From: Stephan Gerhold <stephan.gerhold@kernkonzept.com>

[ Upstream commit e0c2ce8217955537dd5434baeba061f209797119 ]

Virtio devices might lose their state when the VMM is restarted
after a suspend to disk (hibernation) cycle. This means that the
guest page size register must be restored for the virtio_mmio legacy
interface, since otherwise the virtio queues are not functional.

This is particularly problematic for QEMU that currently still defaults
to using the legacy interface for virtio_mmio. Write the guest page
size register again in virtio_mmio_restore() to make legacy virtio_mmio
devices work correctly after hibernation.

Signed-off-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com>
Message-Id: <20220621110621.3638025-3-stephan.gerhold@kernkonzept.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/virtio/virtio_mmio.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/virtio/virtio_mmio.c b/drivers/virtio/virtio_mmio.c
index 2a2d817caeff..e781e5e9215f 100644
--- a/drivers/virtio/virtio_mmio.c
+++ b/drivers/virtio/virtio_mmio.c
@@ -527,6 +527,9 @@ static int virtio_mmio_restore(struct device *dev)
 {
 	struct virtio_mmio_device *vm_dev = dev_get_drvdata(dev);
 
+	if (vm_dev->version == 1)
+		writel(PAGE_SIZE, vm_dev->base + VIRTIO_MMIO_GUEST_PAGE_SIZE);
+
 	return virtio_device_restore(&vm_dev->vdev);
 }
 
-- 
2.35.1

[PATCH 5.4 47/71] netfilter: br_netfilter: do not skip all hooks with 0 priority

[Greg Kroah-Hartman]

From: Florian Westphal <fw@strlen.de>

[ Upstream commit c2577862eeb0be94f151f2f1fff662b028061b00 ]

When br_netfilter module is loaded, skbs may be diverted to the
ipv4/ipv6 hooks, just like as if we were routing.

Unfortunately, bridge filter hooks with priority 0 may be skipped
in this case.

Example:
1. an nftables bridge ruleset is loaded, with a prerouting
   hook that has priority 0.
2. interface is added to the bridge.
3. no tcp packet is ever seen by the bridge prerouting hook.
4. flush the ruleset
5. load the bridge ruleset again.
6. tcp packets are processed as expected.

After 1) the only registered hook is the bridge prerouting hook, but its
not called yet because the bridge hasn't been brought up yet.

After 2), hook order is:
   0 br_nf_pre_routing // br_netfilter internal hook
   0 chain bridge f prerouting // nftables bridge ruleset

The packet is diverted to br_nf_pre_routing.
If call-iptables is off, the nftables bridge ruleset is called as expected.

But if its enabled, br_nf_hook_thresh() will skip it because it assumes
that all 0-priority hooks had been called previously in bridge context.

To avoid this, check for the br_nf_pre_routing hook itself, we need to
resume directly after it, even if this hook has a priority of 0.

Unfortunately, this still results in different packet flow.
With this fix, the eval order after in 3) is:
1. br_nf_pre_routing
2. ip(6)tables (if enabled)
3. nftables bridge

but after 5 its the much saner:
1. nftables bridge
2. br_nf_pre_routing
3. ip(6)tables (if enabled)

Unfortunately I don't see a solution here:
It would be possible to move br_nf_pre_routing to a higher priority
so that it will be called later in the pipeline, but this also impacts
ebtables evaluation order, and would still result in this very ordering
problem for all nftables-bridge hooks with the same priority as the
br_nf_pre_routing one.

Searching back through the git history I don't think this has
ever behaved in any other way, hence, no fixes-tag.

Reported-by: Radim Hrazdil <rhrazdil@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/bridge/br_netfilter_hooks.c | 21 ++++++++++++++++++---
 1 file changed, 18 insertions(+), 3 deletions(-)

diff --git a/net/bridge/br_netfilter_hooks.c b/net/bridge/br_netfilter_hooks.c
index 480e4111b24c..19726d81025d 100644
--- a/net/bridge/br_netfilter_hooks.c
+++ b/net/bridge/br_netfilter_hooks.c
@@ -1012,9 +1012,24 @@ int br_nf_hook_thresh(unsigned int hook, struct net *net,
 		return okfn(net, sk, skb);
 
 	ops = nf_hook_entries_get_hook_ops(e);
-	for (i = 0; i < e->num_hook_entries &&
-	      ops[i]->priority <= NF_BR_PRI_BRNF; i++)
-		;
+	for (i = 0; i < e->num_hook_entries; i++) {
+		/* These hooks have already been called */
+		if (ops[i]->priority < NF_BR_PRI_BRNF)
+			continue;
+
+		/* These hooks have not been called yet, run them. */
+		if (ops[i]->priority > NF_BR_PRI_BRNF)
+			break;
+
+		/* take a closer look at NF_BR_PRI_BRNF. */
+		if (ops[i]->hook == br_nf_pre_routing) {
+			/* This hook diverted the skb to this function,
+			 * hooks after this have not been run yet.
+			 */
+			i++;
+			break;
+		}
+	}
 
 	nf_hook_state_init(&state, hook, NFPROTO_BRIDGE, indev, outdev,
 			   sk, net, okfn);
-- 
2.35.1

[PATCH 5.4 48/71] cpufreq: pmac32-cpufreq: Fix refcount leak bug

[Greg Kroah-Hartman]

From: Liang He <windhl@126.com>

[ Upstream commit ccd7567d4b6cf187fdfa55f003a9e461ee629e36 ]

In pmac_cpufreq_init_MacRISC3(), we need to add corresponding
of_node_put() for the three node pointers whose refcount have
been incremented by of_find_node_by_name().

Signed-off-by: Liang He <windhl@126.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/cpufreq/pmac32-cpufreq.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/cpufreq/pmac32-cpufreq.c b/drivers/cpufreq/pmac32-cpufreq.c
index 73621bc11976..3704476bb83a 100644
--- a/drivers/cpufreq/pmac32-cpufreq.c
+++ b/drivers/cpufreq/pmac32-cpufreq.c
@@ -471,6 +471,10 @@ static int pmac_cpufreq_init_MacRISC3(struct device_node *cpunode)
 	if (slew_done_gpio_np)
 		slew_done_gpio = read_gpio(slew_done_gpio_np);
 
+	of_node_put(volt_gpio_np);
+	of_node_put(freq_gpio_np);
+	of_node_put(slew_done_gpio_np);
+
 	/* If we use the frequency GPIOs, calculate the min/max speeds based
 	 * on the bus frequencies
 	 */
-- 
2.35.1

[PATCH 5.4 49/71] platform/x86: hp-wmi: Ignore Sanitization Mode event

[Greg Kroah-Hartman]

From: Kai-Heng Feng <kai.heng.feng@canonical.com>

[ Upstream commit 9ab762a84b8094540c18a170e5ddd6488632c456 ]

After system resume the hp-wmi driver may complain:
[ 702.620180] hp_wmi: Unknown event_id - 23 - 0x0

According to HP it means 'Sanitization Mode' and it's harmless to just
ignore the event.

Cc: Jorge Lopez <jorge.lopez2@hp.com>
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Link: https://lore.kernel.org/r/20220628123726.250062-1-kai.heng.feng@canonical.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/platform/x86/hp-wmi.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/platform/x86/hp-wmi.c b/drivers/platform/x86/hp-wmi.c
index 63a530a3d9fe..c3fdb0ecad96 100644
--- a/drivers/platform/x86/hp-wmi.c
+++ b/drivers/platform/x86/hp-wmi.c
@@ -62,6 +62,7 @@ enum hp_wmi_event_ids {
 	HPWMI_BACKLIT_KB_BRIGHTNESS	= 0x0D,
 	HPWMI_PEAKSHIFT_PERIOD		= 0x0F,
 	HPWMI_BATTERY_CHARGE_PERIOD	= 0x10,
+	HPWMI_SANITIZATION_MODE		= 0x17,
 };
 
 struct bios_args {
@@ -629,6 +630,8 @@ static void hp_wmi_notify(u32 value, void *context)
 		break;
 	case HPWMI_BATTERY_CHARGE_PERIOD:
 		break;
+	case HPWMI_SANITIZATION_MODE:
+		break;
 	default:
 		pr_info("Unknown event_id - %d - 0x%x\n", event_id, event_data);
 		break;
-- 
2.35.1

[PATCH 5.4 50/71] net: tipc: fix possible refcount leak in tipc_sk_create()

[Greg Kroah-Hartman]

From: Hangyu Hua <hbh25y@gmail.com>

[ Upstream commit 00aff3590fc0a73bddd3b743863c14e76fd35c0c ]

Free sk in case tipc_sk_insert() fails.

Signed-off-by: Hangyu Hua <hbh25y@gmail.com>
Reviewed-by: Tung Nguyen <tung.q.nguyen@dektech.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/tipc/socket.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/net/tipc/socket.c b/net/tipc/socket.c
index d543c4556df2..58c4d61d603f 100644
--- a/net/tipc/socket.c
+++ b/net/tipc/socket.c
@@ -455,6 +455,7 @@ static int tipc_sk_create(struct net *net, struct socket *sock,
 	sock_init_data(sock, sk);
 	tipc_set_sk_state(sk, TIPC_OPEN);
 	if (tipc_sk_insert(tsk)) {
+		sk_free(sk);
 		pr_warn("Socket create failed; port number exhausted\n");
 		return -EINVAL;
 	}
-- 
2.35.1

[PATCH 5.4 51/71] NFC: nxp-nci: dont print header length mismatch on i2c error

[Greg Kroah-Hartman]

From: Michael Walle <michael@walle.cc>

[ Upstream commit 9577fc5fdc8b07b891709af6453545db405e24ad ]

Don't print a misleading header length mismatch error if the i2c call
returns an error. Instead just return the error code without any error
message.

Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/nfc/nxp-nci/i2c.c |    8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

--- a/drivers/nfc/nxp-nci/i2c.c
+++ b/drivers/nfc/nxp-nci/i2c.c
@@ -122,7 +122,9 @@ static int nxp_nci_i2c_fw_read(struct nx
 	skb_put_data(*skb, &header, NXP_NCI_FW_HDR_LEN);
 
 	r = i2c_master_recv(client, skb_put(*skb, frame_len), frame_len);
-	if (r != frame_len) {
+	if (r < 0) {
+		goto fw_read_exit_free_skb;
+	} else if (r != frame_len) {
 		nfc_err(&client->dev,
 			"Invalid frame length: %u (expected %zu)\n",
 			r, frame_len);
@@ -166,7 +168,9 @@ static int nxp_nci_i2c_nci_read(struct n
 		return 0;
 
 	r = i2c_master_recv(client, skb_put(*skb, header.plen), header.plen);
-	if (r != header.plen) {
+	if (r < 0) {
+		goto nci_read_exit_free_skb;
+	} else if (r != header.plen) {
 		nfc_err(&client->dev,
 			"Invalid frame payload length: %u (expected %u)\n",
 			r, header.plen);

[PATCH 5.4 52/71] nvme: fix regression when disconnect a recovering ctrl

[Greg Kroah-Hartman]

From: Ruozhu Li <liruozhu@huawei.com>

[ Upstream commit f7f70f4aa09dc43d7455c060143e86a017c30548 ]

We encountered a problem that the disconnect command hangs.
After analyzing the log and stack, we found that the triggering
process is as follows:
CPU0                          CPU1
                                nvme_rdma_error_recovery_work
                                  nvme_rdma_teardown_io_queues
nvme_do_delete_ctrl                 nvme_stop_queues
  nvme_remove_namespaces
  --clear ctrl->namespaces
                                    nvme_start_queues
                                    --no ns in ctrl->namespaces
    nvme_ns_remove                  return(because ctrl is deleting)
      blk_freeze_queue
        blk_mq_freeze_queue_wait
        --wait for ns to unquiesce to clean infligt IO, hang forever

This problem was not found in older kernels because we will flush
err work in nvme_stop_ctrl before nvme_remove_namespaces.It does not
seem to be modified for functional reasons, the patch can be revert
to solve the problem.

Revert commit 794a4cb3d2f7 ("nvme: remove the .stop_ctrl callout")

Signed-off-by: Ruozhu Li <liruozhu@huawei.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/nvme/host/core.c |  2 ++
 drivers/nvme/host/nvme.h |  1 +
 drivers/nvme/host/rdma.c | 12 +++++++++---
 drivers/nvme/host/tcp.c  | 10 +++++++---
 4 files changed, 19 insertions(+), 6 deletions(-)

diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c
index 79e22618817d..d2ea6ca37c41 100644
--- a/drivers/nvme/host/core.c
+++ b/drivers/nvme/host/core.c
@@ -4034,6 +4034,8 @@ void nvme_stop_ctrl(struct nvme_ctrl *ctrl)
 	nvme_stop_keep_alive(ctrl);
 	flush_work(&ctrl->async_event_work);
 	cancel_work_sync(&ctrl->fw_act_work);
+	if (ctrl->ops->stop_ctrl)
+		ctrl->ops->stop_ctrl(ctrl);
 }
 EXPORT_SYMBOL_GPL(nvme_stop_ctrl);
 
diff --git a/drivers/nvme/host/nvme.h b/drivers/nvme/host/nvme.h
index 1d1431dd4f9e..81a5b968253f 100644
--- a/drivers/nvme/host/nvme.h
+++ b/drivers/nvme/host/nvme.h
@@ -402,6 +402,7 @@ struct nvme_ctrl_ops {
 	void (*free_ctrl)(struct nvme_ctrl *ctrl);
 	void (*submit_async_event)(struct nvme_ctrl *ctrl);
 	void (*delete_ctrl)(struct nvme_ctrl *ctrl);
+	void (*stop_ctrl)(struct nvme_ctrl *ctrl);
 	int (*get_address)(struct nvme_ctrl *ctrl, char *buf, int size);
 };
 
diff --git a/drivers/nvme/host/rdma.c b/drivers/nvme/host/rdma.c
index 4213c71b02a4..d5d7b2f98edc 100644
--- a/drivers/nvme/host/rdma.c
+++ b/drivers/nvme/host/rdma.c
@@ -973,6 +973,14 @@ static void nvme_rdma_teardown_io_queues(struct nvme_rdma_ctrl *ctrl,
 	}
 }
 
+static void nvme_rdma_stop_ctrl(struct nvme_ctrl *nctrl)
+{
+	struct nvme_rdma_ctrl *ctrl = to_rdma_ctrl(nctrl);
+
+	cancel_work_sync(&ctrl->err_work);
+	cancel_delayed_work_sync(&ctrl->reconnect_work);
+}
+
 static void nvme_rdma_free_ctrl(struct nvme_ctrl *nctrl)
 {
 	struct nvme_rdma_ctrl *ctrl = to_rdma_ctrl(nctrl);
@@ -1947,9 +1955,6 @@ static const struct blk_mq_ops nvme_rdma_admin_mq_ops = {
 
 static void nvme_rdma_shutdown_ctrl(struct nvme_rdma_ctrl *ctrl, bool shutdown)
 {
-	cancel_work_sync(&ctrl->err_work);
-	cancel_delayed_work_sync(&ctrl->reconnect_work);
-
 	nvme_rdma_teardown_io_queues(ctrl, shutdown);
 	blk_mq_quiesce_queue(ctrl->ctrl.admin_q);
 	if (shutdown)
@@ -1999,6 +2004,7 @@ static const struct nvme_ctrl_ops nvme_rdma_ctrl_ops = {
 	.submit_async_event	= nvme_rdma_submit_async_event,
 	.delete_ctrl		= nvme_rdma_delete_ctrl,
 	.get_address		= nvmf_get_address,
+	.stop_ctrl		= nvme_rdma_stop_ctrl,
 };
 
 /*
diff --git a/drivers/nvme/host/tcp.c b/drivers/nvme/host/tcp.c
index 4378344f0e7a..2a27ac9aedba 100644
--- a/drivers/nvme/host/tcp.c
+++ b/drivers/nvme/host/tcp.c
@@ -1973,9 +1973,6 @@ static void nvme_tcp_error_recovery_work(struct work_struct *work)
 
 static void nvme_tcp_teardown_ctrl(struct nvme_ctrl *ctrl, bool shutdown)
 {
-	cancel_work_sync(&to_tcp_ctrl(ctrl)->err_work);
-	cancel_delayed_work_sync(&to_tcp_ctrl(ctrl)->connect_work);
-
 	nvme_tcp_teardown_io_queues(ctrl, shutdown);
 	blk_mq_quiesce_queue(ctrl->admin_q);
 	if (shutdown)
@@ -2014,6 +2011,12 @@ static void nvme_reset_ctrl_work(struct work_struct *work)
 	nvme_tcp_reconnect_or_remove(ctrl);
 }
 
+static void nvme_tcp_stop_ctrl(struct nvme_ctrl *ctrl)
+{
+	cancel_work_sync(&to_tcp_ctrl(ctrl)->err_work);
+	cancel_delayed_work_sync(&to_tcp_ctrl(ctrl)->connect_work);
+}
+
 static void nvme_tcp_free_ctrl(struct nvme_ctrl *nctrl)
 {
 	struct nvme_tcp_ctrl *ctrl = to_tcp_ctrl(nctrl);
@@ -2322,6 +2325,7 @@ static const struct nvme_ctrl_ops nvme_tcp_ctrl_ops = {
 	.submit_async_event	= nvme_tcp_submit_async_event,
 	.delete_ctrl		= nvme_tcp_delete_ctrl,
 	.get_address		= nvmf_get_address,
+	.stop_ctrl		= nvme_tcp_stop_ctrl,
 };
 
 static bool
-- 
2.35.1

[PATCH 5.4 53/71] net: sfp: fix memory leak in sfp_probe()

[Greg Kroah-Hartman]

From: Jianglei Nie <niejianglei2021@163.com>

[ Upstream commit 0a18d802d65cf662644fd1d369c86d84a5630652 ]

sfp_probe() allocates a memory chunk from sfp with sfp_alloc(). When
devm_add_action() fails, sfp is not freed, which leads to a memory leak.

We should use devm_add_action_or_reset() instead of devm_add_action().

Signed-off-by: Jianglei Nie <niejianglei2021@163.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/20220629075550.2152003-1-niejianglei2021@163.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/phy/sfp.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/phy/sfp.c b/drivers/net/phy/sfp.c
index 5657c604602e..beaa00342a13 100644
--- a/drivers/net/phy/sfp.c
+++ b/drivers/net/phy/sfp.c
@@ -1878,7 +1878,7 @@ static int sfp_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, sfp);
 
-	err = devm_add_action(sfp->dev, sfp_cleanup, sfp);
+	err = devm_add_action_or_reset(sfp->dev, sfp_cleanup, sfp);
 	if (err < 0)
 		return err;
 
-- 
2.35.1

[PATCH 5.4 54/71] ASoC: ops: Fix off by one in range control validation

[Greg Kroah-Hartman]

From: Mark Brown <broonie@kernel.org>

[ Upstream commit 5871321fb4558c55bf9567052b618ff0be6b975e ]

We currently report that range controls accept a range of 0..(max-min) but
accept writes in the range 0..(max-min+1). Remove that extra +1.

Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220604105246.4055214-1-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/soc-ops.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/sound/soc/soc-ops.c b/sound/soc/soc-ops.c
index 7a37312c8e0c..453b61b42dd9 100644
--- a/sound/soc/soc-ops.c
+++ b/sound/soc/soc-ops.c
@@ -530,7 +530,7 @@ int snd_soc_put_volsw_range(struct snd_kcontrol *kcontrol,
 		return -EINVAL;
 	if (mc->platform_max && tmp > mc->platform_max)
 		return -EINVAL;
-	if (tmp > mc->max - mc->min + 1)
+	if (tmp > mc->max - mc->min)
 		return -EINVAL;
 
 	if (invert)
@@ -551,7 +551,7 @@ int snd_soc_put_volsw_range(struct snd_kcontrol *kcontrol,
 			return -EINVAL;
 		if (mc->platform_max && tmp > mc->platform_max)
 			return -EINVAL;
-		if (tmp > mc->max - mc->min + 1)
+		if (tmp > mc->max - mc->min)
 			return -EINVAL;
 
 		if (invert)
-- 
2.35.1

[PATCH 5.4 55/71] ASoC: wm5110: Fix DRE control

[Greg Kroah-Hartman]

From: Charles Keepax <ckeepax@opensource.cirrus.com>

[ Upstream commit 0bc0ae9a5938d512fd5d44f11c9c04892dcf4961 ]

The DRE controls on wm5110 should return a value of 1 if the DRE state
is actually changed, update to fix this.

Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220621102041.1713504-2-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/codecs/wm5110.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/sound/soc/codecs/wm5110.c b/sound/soc/codecs/wm5110.c
index 9dc215b5c504..06ec3f48c808 100644
--- a/sound/soc/codecs/wm5110.c
+++ b/sound/soc/codecs/wm5110.c
@@ -413,6 +413,7 @@ static int wm5110_put_dre(struct snd_kcontrol *kcontrol,
 	unsigned int rnew = (!!ucontrol->value.integer.value[1]) << mc->rshift;
 	unsigned int lold, rold;
 	unsigned int lena, rena;
+	bool change = false;
 	int ret;
 
 	snd_soc_dapm_mutex_lock(dapm);
@@ -440,8 +441,8 @@ static int wm5110_put_dre(struct snd_kcontrol *kcontrol,
 		goto err;
 	}
 
-	ret = regmap_update_bits(arizona->regmap, ARIZONA_DRE_ENABLE,
-				 mask, lnew | rnew);
+	ret = regmap_update_bits_check(arizona->regmap, ARIZONA_DRE_ENABLE,
+				       mask, lnew | rnew, &change);
 	if (ret) {
 		dev_err(arizona->dev, "Failed to set DRE: %d\n", ret);
 		goto err;
@@ -454,6 +455,9 @@ static int wm5110_put_dre(struct snd_kcontrol *kcontrol,
 	if (!rnew && rold)
 		wm5110_clear_pga_volume(arizona, mc->rshift);
 
+	if (change)
+		ret = 1;
+
 err:
 	snd_soc_dapm_mutex_unlock(dapm);
 
-- 
2.35.1

[PATCH 5.4 56/71] ASoC: cs47l15: Fix event generation for low power mux control

[Greg Kroah-Hartman]

From: Charles Keepax <ckeepax@opensource.cirrus.com>

[ Upstream commit 7f103af4a10f375b9b346b4d0b730f6a66b8c451 ]

cs47l15_in1_adc_put always returns zero regardless of if the control
value was updated. This results in missing notifications to user-space
of the control change. Update the handling to return 1 when the value is
changed.

Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220623105120.1981154-3-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/codecs/cs47l15.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/sound/soc/codecs/cs47l15.c b/sound/soc/codecs/cs47l15.c
index ece1276f38eb..1f7148794a5a 100644
--- a/sound/soc/codecs/cs47l15.c
+++ b/sound/soc/codecs/cs47l15.c
@@ -122,6 +122,9 @@ static int cs47l15_in1_adc_put(struct snd_kcontrol *kcontrol,
 		snd_soc_kcontrol_component(kcontrol);
 	struct cs47l15 *cs47l15 = snd_soc_component_get_drvdata(component);
 
+	if (!!ucontrol->value.integer.value[0] == cs47l15->in1_lp_mode)
+		return 0;
+
 	switch (ucontrol->value.integer.value[0]) {
 	case 0:
 		/* Set IN1 to normal mode */
@@ -150,7 +153,7 @@ static int cs47l15_in1_adc_put(struct snd_kcontrol *kcontrol,
 		break;
 	}
 
-	return 0;
+	return 1;
 }
 
 static const struct snd_kcontrol_new cs47l15_snd_controls[] = {
-- 
2.35.1

[PATCH 5.4 57/71] ASoC: madera: Fix event generation for OUT1 demux

[Greg Kroah-Hartman]

From: Charles Keepax <ckeepax@opensource.cirrus.com>

[ Upstream commit e3cabbef3db8269207a6b8808f510137669f8deb ]

madera_out1_demux_put returns the value of
snd_soc_dapm_mux_update_power, which returns a 1 if a path was found for
the kcontrol. This is obviously different to the expected return a 1 if
the control was updated value. This results in spurious notifications to
user-space. Update the handling to only return a 1 when the value is
changed.

Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220623105120.1981154-4-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/codecs/madera.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/sound/soc/codecs/madera.c b/sound/soc/codecs/madera.c
index 52639811cc52..e375dca9ba8d 100644
--- a/sound/soc/codecs/madera.c
+++ b/sound/soc/codecs/madera.c
@@ -568,7 +568,13 @@ int madera_out1_demux_put(struct snd_kcontrol *kcontrol,
 end:
 	snd_soc_dapm_mutex_unlock(dapm);
 
-	return snd_soc_dapm_mux_update_power(dapm, kcontrol, mux, e, NULL);
+	ret = snd_soc_dapm_mux_update_power(dapm, kcontrol, mux, e, NULL);
+	if (ret < 0) {
+		dev_err(madera->dev, "Failed to update demux power state: %d\n", ret);
+		return ret;
+	}
+
+	return change;
 }
 EXPORT_SYMBOL_GPL(madera_out1_demux_put);
 
-- 
2.35.1

[PATCH 5.4 58/71] ASoC: madera: Fix event generation for rate controls

[Greg Kroah-Hartman]

From: Charles Keepax <ckeepax@opensource.cirrus.com>

[ Upstream commit 980555e95f7cabdc9c80a07107622b097ba23703 ]

madera_adsp_rate_put always returns zero regardless of if the control
value was updated. This results in missing notifications to user-space
of the control change. Update the handling to return 1 when the
value is changed.

Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220623105120.1981154-5-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/codecs/madera.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/sound/soc/codecs/madera.c b/sound/soc/codecs/madera.c
index e375dca9ba8d..4a56082a4c43 100644
--- a/sound/soc/codecs/madera.c
+++ b/sound/soc/codecs/madera.c
@@ -853,7 +853,7 @@ static int madera_adsp_rate_put(struct snd_kcontrol *kcontrol,
 	struct soc_enum *e = (struct soc_enum *)kcontrol->private_value;
 	const int adsp_num = e->shift_l;
 	const unsigned int item = ucontrol->value.enumerated.item[0];
-	int ret;
+	int ret = 0;
 
 	if (item >= e->items)
 		return -EINVAL;
@@ -870,10 +870,10 @@ static int madera_adsp_rate_put(struct snd_kcontrol *kcontrol,
 			 "Cannot change '%s' while in use by active audio paths\n",
 			 kcontrol->id.name);
 		ret = -EBUSY;
-	} else {
+	} else if (priv->adsp_rate_cache[adsp_num] != e->values[item]) {
 		/* Volatile register so defer until the codec is powered up */
 		priv->adsp_rate_cache[adsp_num] = e->values[item];
-		ret = 0;
+		ret = 1;
 	}
 
 	mutex_unlock(&priv->rate_lock);
-- 
2.35.1

[PATCH 5.4 59/71] irqchip: or1k-pic: Undefine mask_ack for level triggered hardware

[Greg Kroah-Hartman]

From: Stafford Horne <shorne@gmail.com>

[ Upstream commit 8520501346ed8d1c4a6dfa751cb57328a9c843f1 ]

The mask_ack operation clears the interrupt by writing to the PICSR
register.  This we don't want for level triggered interrupt because
it does not actually clear the interrupt on the source hardware.

This was causing issues in qemu with multi core setups where
interrupts would continue to fire even though they had been cleared in
PICSR.

Just remove the mask_ack operation.

Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Stafford Horne <shorne@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/irqchip/irq-or1k-pic.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/irqchip/irq-or1k-pic.c b/drivers/irqchip/irq-or1k-pic.c
index 03d2366118dd..d5f1fabc45d7 100644
--- a/drivers/irqchip/irq-or1k-pic.c
+++ b/drivers/irqchip/irq-or1k-pic.c
@@ -66,7 +66,6 @@ static struct or1k_pic_dev or1k_pic_level = {
 		.name = "or1k-PIC-level",
 		.irq_unmask = or1k_pic_unmask,
 		.irq_mask = or1k_pic_mask,
-		.irq_mask_ack = or1k_pic_mask_ack,
 	},
 	.handle = handle_level_irq,
 	.flags = IRQ_LEVEL | IRQ_NOPROBE,
-- 
2.35.1

[PATCH 5.4 60/71] x86: Clear .brk area at early boot

[Greg Kroah-Hartman]

From: Juergen Gross <jgross@suse.com>

[ Upstream commit 38fa5479b41376dc9d7f57e71c83514285a25ca0 ]

The .brk section has the same properties as .bss: it is an alloc-only
section and should be cleared before being used.

Not doing so is especially a problem for Xen PV guests, as the
hypervisor will validate page tables (check for writable page tables
and hypervisor private bits) before accepting them to be used.

Make sure .brk is initially zero by letting clear_bss() clear the brk
area, too.

Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20220630071441.28576-3-jgross@suse.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/kernel/head64.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/x86/kernel/head64.c b/arch/x86/kernel/head64.c
index 206a4b6144c2..950286016f63 100644
--- a/arch/x86/kernel/head64.c
+++ b/arch/x86/kernel/head64.c
@@ -383,6 +383,8 @@ static void __init clear_bss(void)
 {
 	memset(__bss_start, 0,
 	       (unsigned long) __bss_stop - (unsigned long) __bss_start);
+	memset(__brk_base, 0,
+	       (unsigned long) __brk_limit - (unsigned long) __brk_base);
 }
 
 static unsigned long get_cmd_line_ptr(void)
-- 
2.35.1

[PATCH 5.4 61/71] soc: ixp4xx/npe: Fix unused match warning

[Greg Kroah-Hartman]

From: Linus Walleij <linus.walleij@linaro.org>

[ Upstream commit 620f83b8326ce9706b1118334f0257ae028ce045 ]

The kernel test robot found this inconsistency:

  drivers/soc/ixp4xx/ixp4xx-npe.c:737:34: warning:
  'ixp4xx_npe_of_match' defined but not used [-Wunused-const-variable=]
     737 | static const struct of_device_id ixp4xx_npe_of_match[] = {

This is because the match is enclosed in the of_match_ptr()
which compiles into NULL when OF is disabled and this
is unnecessary.

Fix it by dropping of_match_ptr() around the match.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20220626074315.61209-1-linus.walleij@linaro.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/soc/ixp4xx/ixp4xx-npe.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/soc/ixp4xx/ixp4xx-npe.c b/drivers/soc/ixp4xx/ixp4xx-npe.c
index 6065aaab6740..8482a4892b83 100644
--- a/drivers/soc/ixp4xx/ixp4xx-npe.c
+++ b/drivers/soc/ixp4xx/ixp4xx-npe.c
@@ -735,7 +735,7 @@ static const struct of_device_id ixp4xx_npe_of_match[] = {
 static struct platform_driver ixp4xx_npe_driver = {
 	.driver = {
 		.name           = "ixp4xx-npe",
-		.of_match_table = of_match_ptr(ixp4xx_npe_of_match),
+		.of_match_table = ixp4xx_npe_of_match,
 	},
 	.probe = ixp4xx_npe_probe,
 	.remove = ixp4xx_npe_remove,
-- 
2.35.1

[PATCH 5.4 62/71] ARM: dts: stm32: use the correct clock source for CEC on stm32mp151

[Greg Kroah-Hartman]

From: Gabriel Fernandez <gabriel.fernandez@foss.st.com>

[ Upstream commit 78ece8cce1ba0c3f3e5a7c6c1b914b3794f04c44 ]

The peripheral clock of CEC is not LSE but CEC.

Signed-off-by: Gabriel Fernandez <gabriel.fernandez@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/stm32mp157c.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/stm32mp157c.dtsi b/arch/arm/boot/dts/stm32mp157c.dtsi
index a687c024daa9..0e9e930c60f0 100644
--- a/arch/arm/boot/dts/stm32mp157c.dtsi
+++ b/arch/arm/boot/dts/stm32mp157c.dtsi
@@ -515,7 +515,7 @@
 			compatible = "st,stm32-cec";
 			reg = <0x40016000 0x400>;
 			interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&rcc CEC_K>, <&clk_lse>;
+			clocks = <&rcc CEC_K>, <&rcc CEC>;
 			clock-names = "cec", "hdmi-cec";
 			status = "disabled";
 		};
-- 
2.35.1

[PATCH 5.4 63/71] signal handling: dont use BUG_ON() for debugging

[Greg Kroah-Hartman]

From: Linus Torvalds <torvalds@linux-foundation.org>

[ Upstream commit a382f8fee42ca10c9bfce0d2352d4153f931f5dc ]

These are indeed "should not happen" situations, but it turns out recent
changes made the 'task_is_stopped_or_trace()' case trigger (fix for that
exists, is pending more testing), and the BUG_ON() makes it
unnecessarily hard to actually debug for no good reason.

It's been that way for a long time, but let's make it clear: BUG_ON() is
not good for debugging, and should never be used in situations where you
could just say "this shouldn't happen, but we can continue".

Use WARN_ON_ONCE() instead to make sure it gets logged, and then just
continue running.  Instead of making the system basically unusuable
because you crashed the machine while potentially holding some very core
locks (eg this function is commonly called while holding 'tasklist_lock'
for writing).

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/signal.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/kernel/signal.c b/kernel/signal.c
index 3f61367fd168..1f4293a107b4 100644
--- a/kernel/signal.c
+++ b/kernel/signal.c
@@ -1916,12 +1916,12 @@ bool do_notify_parent(struct task_struct *tsk, int sig)
 	bool autoreap = false;
 	u64 utime, stime;
 
-	BUG_ON(sig == -1);
+	WARN_ON_ONCE(sig == -1);
 
- 	/* do_notify_parent_cldstop should have been called instead.  */
- 	BUG_ON(task_is_stopped_or_traced(tsk));
+	/* do_notify_parent_cldstop should have been called instead.  */
+	WARN_ON_ONCE(task_is_stopped_or_traced(tsk));
 
-	BUG_ON(!tsk->ptrace &&
+	WARN_ON_ONCE(!tsk->ptrace &&
 	       (tsk->group_leader != tsk || !thread_group_empty(tsk)));
 
 	/* Wake up all pidfd waiters */
-- 
2.35.1

[PATCH 5.4 64/71] USB: serial: ftdi_sio: add Belimo device ids

[Greg Kroah-Hartman]

From: Lucien Buchmann <lucien.buchmann@gmx.net>

commit 7c239a071d1f04b7137789810807b4108d475c72 upstream.

Those two product ids are known.

Signed-off-by: Lucien Buchmann <lucien.buchmann@gmx.net>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/serial/ftdi_sio.c     |    3 +++
 drivers/usb/serial/ftdi_sio_ids.h |    6 ++++++
 2 files changed, 9 insertions(+)

--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -1023,6 +1023,9 @@ static const struct usb_device_id id_tab
 	{ USB_DEVICE(FTDI_VID, CHETCO_SEASMART_DISPLAY_PID) },
 	{ USB_DEVICE(FTDI_VID, CHETCO_SEASMART_LITE_PID) },
 	{ USB_DEVICE(FTDI_VID, CHETCO_SEASMART_ANALOG_PID) },
+	/* Belimo Automation devices */
+	{ USB_DEVICE(FTDI_VID, BELIMO_ZTH_PID) },
+	{ USB_DEVICE(FTDI_VID, BELIMO_ZIP_PID) },
 	/* ICP DAS I-756xU devices */
 	{ USB_DEVICE(ICPDAS_VID, ICPDAS_I7560U_PID) },
 	{ USB_DEVICE(ICPDAS_VID, ICPDAS_I7561U_PID) },
--- a/drivers/usb/serial/ftdi_sio_ids.h
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -1569,6 +1569,12 @@
 #define CHETCO_SEASMART_ANALOG_PID	0xA5AF /* SeaSmart Analog Adapter */
 
 /*
+ * Belimo Automation
+ */
+#define BELIMO_ZTH_PID			0x8050
+#define BELIMO_ZIP_PID			0xC811
+
+/*
  * Unjo AB
  */
 #define UNJO_VID			0x22B7

[PATCH 5.4 65/71] usb: typec: add missing uevent when partner support PD

[Greg Kroah-Hartman]

From: Linyu Yuan <quic_linyyuan@quicinc.com>

commit 6fb9e1d94789e8ee5a258a23bc588693f743fd6c upstream.

System like Android allow user control power role from UI, it is possible
to implement application base on typec uevent to refresh UI, but found
there is chance that UI show different state from typec attribute file.

In typec_set_pwr_opmode(), when partner support PD, there is no uevent
send to user space which cause the problem.

Fix it by sending uevent notification when change power mode to PD.

Fixes: bdecb33af34f ("usb: typec: API for controlling USB Type-C Multiplexers")
Cc: stable@vger.kernel.org
Signed-off-by: Linyu Yuan <quic_linyyuan@quicinc.com>
Link: https://lore.kernel.org/r/1656662934-10226-1-git-send-email-quic_linyyuan@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/typec/class.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/usb/typec/class.c
+++ b/drivers/usb/typec/class.c
@@ -1383,6 +1383,7 @@ void typec_set_pwr_opmode(struct typec_p
 			partner->usb_pd = 1;
 			sysfs_notify(&partner_dev->kobj, NULL,
 				     "supports_usb_power_delivery");
+			kobject_uevent(&partner_dev->kobj, KOBJ_CHANGE);
 		}
 		put_device(partner_dev);
 	}

[PATCH 5.4 66/71] usb: dwc3: gadget: Fix event pending check

[Greg Kroah-Hartman]

From: Thinh Nguyen <Thinh.Nguyen@synopsys.com>

commit 7441b273388b9a59d8387a03ffbbca9d5af6348c upstream.

The DWC3_EVENT_PENDING flag is used to protect against invalid call to
top-half interrupt handler, which can occur when there's a delay in
software detection of the interrupt line deassertion.

However, the clearing of this flag was done prior to unmasking the
interrupt line, creating opportunity where the top-half handler can
come. This breaks the serialization and creates a race between the
top-half and bottom-half handler, resulting in losing synchronization
between the controller and the driver when processing events.

To fix this, make sure the clearing of the DWC3_EVENT_PENDING is done at
the end of the bottom-half handler.

Fixes: d325a1de49d6 ("usb: dwc3: gadget: Prevent losing events in event cache")
Cc: stable@vger.kernel.org
Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/8670aaf1cf52e7d1e6df2a827af2d77263b93b75.1656380429.git.Thinh.Nguyen@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/dwc3/gadget.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -3535,7 +3535,6 @@ static irqreturn_t dwc3_process_event_bu
 	}
 
 	evt->count = 0;
-	evt->flags &= ~DWC3_EVENT_PENDING;
 	ret = IRQ_HANDLED;
 
 	/* Unmask interrupt */
@@ -3548,6 +3547,9 @@ static irqreturn_t dwc3_process_event_bu
 		dwc3_writel(dwc->regs, DWC3_DEV_IMOD(0), dwc->imod_interval);
 	}
 
+	/* Keep the clearing of DWC3_EVENT_PENDING at the end */
+	evt->flags &= ~DWC3_EVENT_PENDING;
+
 	return ret;
 }
 

[PATCH 5.4 67/71] tty: serial: samsung_tty: set dma burst_size to 1

[Greg Kroah-Hartman]

From: Chanho Park <chanho61.park@samsung.com>

commit f7e35e4bf1e8dc2c8cbd5e0955dc1bd58558dae0 upstream.

The src_maxburst and dst_maxburst have been changed to 1 but the settings
of the UCON register aren't changed yet. They should be changed as well
according to the dmaengine slave config.

Fixes: aa2f80e752c7 ("serial: samsung: fix maxburst parameter for DMA transactions")
Cc: stable <stable@kernel.org>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Chanho Park <chanho61.park@samsung.com>
Link: https://lore.kernel.org/r/20220627065113.139520-1-chanho61.park@samsung.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/tty/serial/samsung.c |    5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

--- a/drivers/tty/serial/samsung.c
+++ b/drivers/tty/serial/samsung.c
@@ -238,8 +238,7 @@ static void enable_tx_dma(struct s3c24xx
 	/* Enable tx dma mode */
 	ucon = rd_regl(port, S3C2410_UCON);
 	ucon &= ~(S3C64XX_UCON_TXBURST_MASK | S3C64XX_UCON_TXMODE_MASK);
-	ucon |= (dma_get_cache_alignment() >= 16) ?
-		S3C64XX_UCON_TXBURST_16 : S3C64XX_UCON_TXBURST_1;
+	ucon |= S3C64XX_UCON_TXBURST_1;
 	ucon |= S3C64XX_UCON_TXMODE_DMA;
 	wr_regl(port,  S3C2410_UCON, ucon);
 
@@ -512,7 +511,7 @@ static void enable_rx_dma(struct s3c24xx
 			S3C64XX_UCON_DMASUS_EN |
 			S3C64XX_UCON_TIMEOUT_EN |
 			S3C64XX_UCON_RXMODE_MASK);
-	ucon |= S3C64XX_UCON_RXBURST_16 |
+	ucon |= S3C64XX_UCON_RXBURST_1 |
 			0xf << S3C64XX_UCON_TIMEOUT_SHIFT |
 			S3C64XX_UCON_EMPTYINT_EN |
 			S3C64XX_UCON_TIMEOUT_EN |

[PATCH 5.4 68/71] serial: 8250: fix return error code in serial8250_request_std_resource()

[Greg Kroah-Hartman]

From: Yi Yang <yiyang13@huawei.com>

commit 6e690d54cfa802f939cefbd2fa2c91bd0b8bd1b6 upstream.

If port->mapbase = NULL in serial8250_request_std_resource() , it need
return a error code instead of 0. If uart_set_info() fail to request new
regions by serial8250_request_std_resource() but the return value of
serial8250_request_std_resource() is 0, The system incorrectly considers
that the resource application is successful and does not attempt to
restore the old setting. A null pointer reference is triggered when the
port resource is later invoked.

Signed-off-by: Yi Yang <yiyang13@huawei.com>
Cc: stable <stable@kernel.org>
Link: https://lore.kernel.org/r/20220628083515.64138-1-yiyang13@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/tty/serial/8250/8250_port.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/drivers/tty/serial/8250/8250_port.c
+++ b/drivers/tty/serial/8250/8250_port.c
@@ -2828,8 +2828,10 @@ static int serial8250_request_std_resour
 	case UPIO_MEM32BE:
 	case UPIO_MEM16:
 	case UPIO_MEM:
-		if (!port->mapbase)
+		if (!port->mapbase) {
+			ret = -EINVAL;
 			break;
+		}
 
 		if (!request_mem_region(port->mapbase, size, "serial")) {
 			ret = -EBUSY;

[PATCH 5.4 69/71] serial: stm32: Clear prev values before setting RTS delays

[Greg Kroah-Hartman]

From: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>

commit 5c5f44e36217de5ead789ff25da71c31c2331c96 upstream.

The code lacks clearing of previous DEAT/DEDT values. Thus, changing
values on the fly results in garbage delays tending towards the maximum
value as more and more bits are ORed together. (Leaving RS485 mode
would have cleared the old values though).

Fixes: 1bcda09d2910 ("serial: stm32: add support for RS485 hardware control mode")
Cc: stable <stable@kernel.org>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20220627150753.34510-1-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/tty/serial/stm32-usart.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/tty/serial/stm32-usart.c
+++ b/drivers/tty/serial/stm32-usart.c
@@ -73,6 +73,8 @@ static void stm32_config_reg_rs485(u32 *
 	*cr3 |= USART_CR3_DEM;
 	over8 = *cr1 & USART_CR1_OVER8;
 
+	*cr1 &= ~(USART_CR1_DEDT_MASK | USART_CR1_DEAT_MASK);
+
 	if (over8)
 		rs485_deat_dedt = delay_ADE * baud * 8;
 	else

[PATCH 5.4 70/71] serial: pl011: UPSTAT_AUTORTS requires .throttle/unthrottle

[Greg Kroah-Hartman]

From: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>

commit 211565b100993c90b53bf40851eacaefc830cfe0 upstream.

The driver must provide throttle and unthrottle in uart_ops when it
sets UPSTAT_AUTORTS. Add them using existing stop_rx &
enable_interrupts functions.

Fixes: 2a76fa283098 (serial: pl011: Adopt generic flag to store auto RTS status)
Cc: stable <stable@kernel.org>
Cc: Lukas Wunner <lukas@wunner.de>
Reported-by: Nuno Gonçalves <nunojpg@gmail.com>
Tested-by: Nuno Gonçalves <nunojpg@gmail.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20220614075637.8558-1-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/tty/serial/amba-pl011.c |   23 +++++++++++++++++++++--
 1 file changed, 21 insertions(+), 2 deletions(-)

--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -1335,6 +1335,15 @@ static void pl011_stop_rx(struct uart_po
 	pl011_dma_rx_stop(uap);
 }
 
+static void pl011_throttle_rx(struct uart_port *port)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&port->lock, flags);
+	pl011_stop_rx(port);
+	spin_unlock_irqrestore(&port->lock, flags);
+}
+
 static void pl011_enable_ms(struct uart_port *port)
 {
 	struct uart_amba_port *uap =
@@ -1728,9 +1737,10 @@ static int pl011_allocate_irq(struct uar
  */
 static void pl011_enable_interrupts(struct uart_amba_port *uap)
 {
+	unsigned long flags;
 	unsigned int i;
 
-	spin_lock_irq(&uap->port.lock);
+	spin_lock_irqsave(&uap->port.lock, flags);
 
 	/* Clear out any spuriously appearing RX interrupts */
 	pl011_write(UART011_RTIS | UART011_RXIS, uap, REG_ICR);
@@ -1752,7 +1762,14 @@ static void pl011_enable_interrupts(stru
 	if (!pl011_dma_rx_running(uap))
 		uap->im |= UART011_RXIM;
 	pl011_write(uap->im, uap, REG_IMSC);
-	spin_unlock_irq(&uap->port.lock);
+	spin_unlock_irqrestore(&uap->port.lock, flags);
+}
+
+static void pl011_unthrottle_rx(struct uart_port *port)
+{
+	struct uart_amba_port *uap = container_of(port, struct uart_amba_port, port);
+
+	pl011_enable_interrupts(uap);
 }
 
 static int pl011_startup(struct uart_port *port)
@@ -2127,6 +2144,8 @@ static const struct uart_ops amba_pl011_
 	.stop_tx	= pl011_stop_tx,
 	.start_tx	= pl011_start_tx,
 	.stop_rx	= pl011_stop_rx,
+	.throttle	= pl011_throttle_rx,
+	.unthrottle	= pl011_unthrottle_rx,
 	.enable_ms	= pl011_enable_ms,
 	.break_ctl	= pl011_break_ctl,
 	.startup	= pl011_startup,

[PATCH 5.4 71/71] can: m_can: m_can_tx_handler(): fix use after free of skb

[Greg Kroah-Hartman]

From: Marc Kleine-Budde <mkl@pengutronix.de>

commit 2e8e79c416aae1de224c0f1860f2e3350fa171f8 upstream.

can_put_echo_skb() will clone skb then free the skb. Move the
can_put_echo_skb() for the m_can version 3.0.x directly before the
start of the xmit in hardware, similar to the 3.1.x branch.

Fixes: 80646733f11c ("can: m_can: update to support CAN FD features")
Link: https://lore.kernel.org/all/20220317081305.739554-1-mkl@pengutronix.de
Cc: stable@vger.kernel.org
Reported-by: Hangyu Hua <hbh25y@gmail.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
[sudip: adjust context]
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/can/m_can/m_can.c |    5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

--- a/drivers/net/can/m_can/m_can.c
+++ b/drivers/net/can/m_can/m_can.c
@@ -1443,8 +1443,6 @@ static netdev_tx_t m_can_tx_handler(stru
 					 M_CAN_FIFO_DATA(i / 4),
 					 *(u32 *)(cf->data + i));
 
-		can_put_echo_skb(skb, dev, 0);
-
 		if (cdev->can.ctrlmode & CAN_CTRLMODE_FD) {
 			cccr = m_can_read(cdev, M_CAN_CCCR);
 			cccr &= ~(CCCR_CMR_MASK << CCCR_CMR_SHIFT);
@@ -1461,6 +1459,9 @@ static netdev_tx_t m_can_tx_handler(stru
 			m_can_write(cdev, M_CAN_CCCR, cccr);
 		}
 		m_can_write(cdev, M_CAN_TXBTIE, 0x1);
+
+		can_put_echo_skb(skb, dev, 0);
+
 		m_can_write(cdev, M_CAN_TXBAR, 0x1);
 		/* End of xmit function for version 3.0.x */
 	} else {

Re: [PATCH 5.4 00/71] 5.4.207-rc1 review

[Florian Fainelli]

On 7/19/2022 4:53 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.4.207 release.
> There are 71 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Thu, 21 Jul 2022 11:43:40 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.207-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h

On ARCH_BRCMSTB using 32-bit and 64-bit ARM kernels and built tested 
with BMIPS_GENERIC (bmips_stb_defconfig):

Tested-by: Florian Fainelli <f.fainelli@gmail.com>
-- 
Florian

Re: [PATCH 5.4 00/71] 5.4.207-rc1 review

[Samuel Zou]

On 2022/7/19 19:53, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.4.207 release.
> There are 71 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Thu, 21 Jul 2022 11:43:40 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.207-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h
> 

Tested on arm64 and x86 for 5.4.207-rc1,

Kernel repo:
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
Branch: linux-5.4.y
Version: 5.4.207-rc1
Commit: 1cdb21e73aae84f13cf9ef22c95eb2128b256d1e
Compiler: gcc version 7.3.0 (GCC)

arm64:
--------------------------------------------------------------------
Testcase Result Summary:
total: 9015
passed: 9015
failed: 0
timeout: 0
--------------------------------------------------------------------

x86:
--------------------------------------------------------------------
Testcase Result Summary:
total: 9015
passed: 9015
failed: 0
timeout: 0
--------------------------------------------------------------------

Tested-by: Hulk Robot <hulkrobot@huawei.com>

Re: [PATCH 5.4 00/71] 5.4.207-rc1 review

[Guenter Roeck]

On Tue, Jul 19, 2022 at 01:53:23PM +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.4.207 release.
> There are 71 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Thu, 21 Jul 2022 11:43:40 +0000.
> Anything received after that time might be too late.
> 

Build results:
	total: 161 pass: 161 fail: 0
Qemu test results:
	total: 449 pass: 449 fail: 0

Tested-by: Guenter Roeck <linux@roeck-us.net>

Guenter

Re: [PATCH 5.4 00/71] 5.4.207-rc1 review

[Naresh Kamboju]

On Tue, 19 Jul 2022 at 17:32, Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
>
> This is the start of the stable review cycle for the 5.4.207 release.
> There are 71 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Thu, 21 Jul 2022 11:43:40 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
>         https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.207-rc1.gz
> or in the git tree and branch at:
>         git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h

Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.

Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>

## Build
* kernel: 5.4.207-rc1
* git: https://gitlab.com/Linaro/lkft/mirrors/stable/linux-stable-rc
* git branch: linux-5.4.y
* git commit: 0b5688944207ade9aea3eabc48e296ff5a72a529
* git describe: v5.4.206-72-g0b5688944207
* test details:
https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-5.4.y/build/v5.4.206-72-g0b5688944207

## Test Regressions (compared to v5.4.206)
No test regressions found.

## Metric Regressions (compared to v5.4.206)
No metric regressions found.

## Test Fixes (compared to v5.4.206)
No test fixes found.

## Metric Fixes (compared to v5.4.206)
No metric fixes found.

## Test result summary
total: 126185, pass: 112707, fail: 727, skip: 11723, xfail: 1028

## Build Summary
* arc: 10 total, 10 passed, 0 failed
* arm: 307 total, 307 passed, 0 failed
* arm64: 61 total, 57 passed, 4 failed
* i386: 28 total, 26 passed, 2 failed
* mips: 45 total, 45 passed, 0 failed
* parisc: 12 total, 12 passed, 0 failed
* powerpc: 54 total, 54 passed, 0 failed
* riscv: 27 total, 27 passed, 0 failed
* s390: 12 total, 12 passed, 0 failed
* sh: 24 total, 24 passed, 0 failed
* sparc: 12 total, 12 passed, 0 failed
* x86_64: 55 total, 53 passed, 2 failed

## Test suites summary
* fwts
* igt-gpu-tools
* kunit
* kvm-unit-tests
* libgpiod
* libhugetlbfs
* log-parser-boot
* log-parser-test
* ltp-cap_bounds
* ltp-commands
* ltp-containers
* ltp-controllers
* ltp-cpuhotplug
* ltp-crypto
* ltp-cve
* ltp-dio
* ltp-fcntl-locktests
* ltp-filecaps
* ltp-fs
* ltp-fs_bind
* ltp-fs_perms_simple
* ltp-fsx
* ltp-hugetlb
* ltp-io
* ltp-ipc
* ltp-math
* ltp-mm
* ltp-nptl
* ltp-open-posix-tests
* ltp-pty
* ltp-sched
* ltp-securebits
* ltp-smoke
* ltp-syscalls
* ltp-tracing
* network-basic-tests
* packetdrill
* perf
* perf/Zstd-perf.data-compression
* rcutorture
* ssuite
* v4l2-compliance
* vdso

--
Linaro LKFT
https://lkft.linaro.org

Re: [PATCH 5.4 00/71] 5.4.207-rc1 review

[Sudip Mukherjee (Codethink)]

Hi Greg,

On Tue, Jul 19, 2022 at 01:53:23PM +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.4.207 release.
> There are 71 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Thu, 21 Jul 2022 11:43:40 +0000.
> Anything received after that time might be too late.

Build test (gcc version 11.3.1 20220706):
mips: 65 configs -> no failure
arm: 106 configs -> no failure
arm64: 2 configs -> no failure
x86_64: 4 configs -> no failure
alpha allmodconfig -> no failure
powerpc allmodconfig -> no failure
riscv allmodconfig -> no failure
s390 allmodconfig -> no failure
xtensa allmodconfig -> no failure


Boot test:
x86_64: Booted on my test laptop. No regression.
x86_64: Booted on qemu. No regression. [1]

[1]. https://openqa.qa.codethink.co.uk/tests/1520


Tested-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>

--
Regards
Sudip