* [PATCH V2] clk: imx8mp: tune the order of enet_qos_root_clk
@ 2022-08-15 1:34 Peng Fan (OSS)
2022-08-15 7:58 ` Abel Vesa
2022-09-02 18:18 ` Abel Vesa
0 siblings, 2 replies; 5+ messages in thread
From: Peng Fan (OSS) @ 2022-08-15 1:34 UTC (permalink / raw)
To: abelvesa, abel.vesa, mturquette, sboyd, shawnguo, s.hauer, kernel,
festevam
Cc: linux-imx, linux-clk, linux-arm-kernel, linux-kernel, Peng Fan,
Ye Li
From: Peng Fan <peng.fan@nxp.com>
The enet_qos_root_clk takes sim_enet_root_clk as parent. When
registering enet_qos_root_clk, it will be put into clk orphan list,
because sim_enet_root_clk is not ready.
When sim_enet_root_clk is ready, clk_core_reparent_orphans_nolock will
set enet_qos_root_clk parent to sim_enet_root_clk.
Because CLK_OPS_PARENT_ENABLE is set, sim_enet_root_clk will be
enabled and disabled during the enet_qos_root_clk reparent phase.
All the above are correct. But with M7 booted early and using
enet, M7 enet feature will be broken, because clk driver probe phase
disable the needed clks, in case M7 firmware not configure
sim_enet_root_clk.
And tune the order would also save cpu cycles.
Reviewed-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
---
V2:
Use Abel's new address
V1:
Patch got reviewed in NXP internal.
drivers/clk/imx/clk-imx8mp.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/clk/imx/clk-imx8mp.c b/drivers/clk/imx/clk-imx8mp.c
index e89db568f5a8..652ae58c2735 100644
--- a/drivers/clk/imx/clk-imx8mp.c
+++ b/drivers/clk/imx/clk-imx8mp.c
@@ -665,8 +665,8 @@ static int imx8mp_clocks_probe(struct platform_device *pdev)
hws[IMX8MP_CLK_CAN1_ROOT] = imx_clk_hw_gate2("can1_root_clk", "can1", ccm_base + 0x4350, 0);
hws[IMX8MP_CLK_CAN2_ROOT] = imx_clk_hw_gate2("can2_root_clk", "can2", ccm_base + 0x4360, 0);
hws[IMX8MP_CLK_SDMA1_ROOT] = imx_clk_hw_gate4("sdma1_root_clk", "ipg_root", ccm_base + 0x43a0, 0);
- hws[IMX8MP_CLK_ENET_QOS_ROOT] = imx_clk_hw_gate4("enet_qos_root_clk", "sim_enet_root_clk", ccm_base + 0x43b0, 0);
hws[IMX8MP_CLK_SIM_ENET_ROOT] = imx_clk_hw_gate4("sim_enet_root_clk", "enet_axi", ccm_base + 0x4400, 0);
+ hws[IMX8MP_CLK_ENET_QOS_ROOT] = imx_clk_hw_gate4("enet_qos_root_clk", "sim_enet_root_clk", ccm_base + 0x43b0, 0);
hws[IMX8MP_CLK_GPU2D_ROOT] = imx_clk_hw_gate4("gpu2d_root_clk", "gpu2d_core", ccm_base + 0x4450, 0);
hws[IMX8MP_CLK_GPU3D_ROOT] = imx_clk_hw_gate4("gpu3d_root_clk", "gpu3d_core", ccm_base + 0x4460, 0);
hws[IMX8MP_CLK_UART1_ROOT] = imx_clk_hw_gate4("uart1_root_clk", "uart1", ccm_base + 0x4490, 0);
--
2.37.1
^ permalink raw reply related [flat|nested] 5+ messages in thread* Re: [PATCH V2] clk: imx8mp: tune the order of enet_qos_root_clk
2022-08-15 1:34 [PATCH V2] clk: imx8mp: tune the order of enet_qos_root_clk Peng Fan (OSS)
@ 2022-08-15 7:58 ` Abel Vesa
2022-08-15 7:59 ` Peng Fan
2022-09-02 18:18 ` Abel Vesa
1 sibling, 1 reply; 5+ messages in thread
From: Abel Vesa @ 2022-08-15 7:58 UTC (permalink / raw)
To: Peng Fan (OSS)
Cc: abelvesa, mturquette, sboyd, shawnguo, s.hauer, kernel, festevam,
linux-imx, linux-clk, linux-arm-kernel, linux-kernel, Peng Fan,
Ye Li
On 22-08-15 09:34:28, Peng Fan (OSS) wrote:
> From: Peng Fan <peng.fan@nxp.com>
>
> The enet_qos_root_clk takes sim_enet_root_clk as parent. When
> registering enet_qos_root_clk, it will be put into clk orphan list,
> because sim_enet_root_clk is not ready.
>
> When sim_enet_root_clk is ready, clk_core_reparent_orphans_nolock will
> set enet_qos_root_clk parent to sim_enet_root_clk.
>
> Because CLK_OPS_PARENT_ENABLE is set, sim_enet_root_clk will be
> enabled and disabled during the enet_qos_root_clk reparent phase.
>
> All the above are correct. But with M7 booted early and using
> enet, M7 enet feature will be broken, because clk driver probe phase
> disable the needed clks, in case M7 firmware not configure
> sim_enet_root_clk.
>
> And tune the order would also save cpu cycles.
>
> Reviewed-by: Ye Li <ye.li@nxp.com>
> Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Abel Vesa <abel.vesa@nxp.com>
> ---
>
> V2:
> Use Abel's new address
>
> V1:
> Patch got reviewed in NXP internal.
>
> drivers/clk/imx/clk-imx8mp.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/clk/imx/clk-imx8mp.c b/drivers/clk/imx/clk-imx8mp.c
> index e89db568f5a8..652ae58c2735 100644
> --- a/drivers/clk/imx/clk-imx8mp.c
> +++ b/drivers/clk/imx/clk-imx8mp.c
> @@ -665,8 +665,8 @@ static int imx8mp_clocks_probe(struct platform_device *pdev)
> hws[IMX8MP_CLK_CAN1_ROOT] = imx_clk_hw_gate2("can1_root_clk", "can1", ccm_base + 0x4350, 0);
> hws[IMX8MP_CLK_CAN2_ROOT] = imx_clk_hw_gate2("can2_root_clk", "can2", ccm_base + 0x4360, 0);
> hws[IMX8MP_CLK_SDMA1_ROOT] = imx_clk_hw_gate4("sdma1_root_clk", "ipg_root", ccm_base + 0x43a0, 0);
> - hws[IMX8MP_CLK_ENET_QOS_ROOT] = imx_clk_hw_gate4("enet_qos_root_clk", "sim_enet_root_clk", ccm_base + 0x43b0, 0);
> hws[IMX8MP_CLK_SIM_ENET_ROOT] = imx_clk_hw_gate4("sim_enet_root_clk", "enet_axi", ccm_base + 0x4400, 0);
> + hws[IMX8MP_CLK_ENET_QOS_ROOT] = imx_clk_hw_gate4("enet_qos_root_clk", "sim_enet_root_clk", ccm_base + 0x43b0, 0);
> hws[IMX8MP_CLK_GPU2D_ROOT] = imx_clk_hw_gate4("gpu2d_root_clk", "gpu2d_core", ccm_base + 0x4450, 0);
> hws[IMX8MP_CLK_GPU3D_ROOT] = imx_clk_hw_gate4("gpu3d_root_clk", "gpu3d_core", ccm_base + 0x4460, 0);
> hws[IMX8MP_CLK_UART1_ROOT] = imx_clk_hw_gate4("uart1_root_clk", "uart1", ccm_base + 0x4490, 0);
> --
> 2.37.1
>
^ permalink raw reply [flat|nested] 5+ messages in thread* RE: [PATCH V2] clk: imx8mp: tune the order of enet_qos_root_clk
2022-08-15 7:58 ` Abel Vesa
@ 2022-08-15 7:59 ` Peng Fan
2022-08-15 8:22 ` Abel Vesa
0 siblings, 1 reply; 5+ messages in thread
From: Peng Fan @ 2022-08-15 7:59 UTC (permalink / raw)
To: Abel Vesa, Peng Fan (OSS)
Cc: abelvesa@kernel.org, mturquette@baylibre.com, sboyd@kernel.org,
shawnguo@kernel.org, s.hauer@pengutronix.de,
kernel@pengutronix.de, festevam@gmail.com, dl-linux-imx,
linux-clk@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, Ye Li
Abel,
> Subject: Re: [PATCH V2] clk: imx8mp: tune the order of enet_qos_root_clk
>
> On 22-08-15 09:34:28, Peng Fan (OSS) wrote:
> > From: Peng Fan <peng.fan@nxp.com>
> >
> > The enet_qos_root_clk takes sim_enet_root_clk as parent. When
> > registering enet_qos_root_clk, it will be put into clk orphan list,
> > because sim_enet_root_clk is not ready.
> >
> > When sim_enet_root_clk is ready, clk_core_reparent_orphans_nolock will
> > set enet_qos_root_clk parent to sim_enet_root_clk.
> >
> > Because CLK_OPS_PARENT_ENABLE is set, sim_enet_root_clk will be
> > enabled and disabled during the enet_qos_root_clk reparent phase.
> >
> > All the above are correct. But with M7 booted early and using enet, M7
> > enet feature will be broken, because clk driver probe phase disable
> > the needed clks, in case M7 firmware not configure sim_enet_root_clk.
> >
> > And tune the order would also save cpu cycles.
> >
> > Reviewed-by: Ye Li <ye.li@nxp.com>
> > Signed-off-by: Peng Fan <peng.fan@nxp.com>
>
> Reviewed-by: Abel Vesa <abel.vesa@nxp.com>
Wrong address?
Thanks,
Peng.
>
> > ---
> >
> > V2:
> > Use Abel's new address
> >
> > V1:
> > Patch got reviewed in NXP internal.
> >
> > drivers/clk/imx/clk-imx8mp.c | 2 +-
> > 1 file changed, 1 insertion(+), 1 deletion(-)
> >
> > diff --git a/drivers/clk/imx/clk-imx8mp.c
> > b/drivers/clk/imx/clk-imx8mp.c index e89db568f5a8..652ae58c2735
> 100644
> > --- a/drivers/clk/imx/clk-imx8mp.c
> > +++ b/drivers/clk/imx/clk-imx8mp.c
> > @@ -665,8 +665,8 @@ static int imx8mp_clocks_probe(struct
> platform_device *pdev)
> > hws[IMX8MP_CLK_CAN1_ROOT] =
> imx_clk_hw_gate2("can1_root_clk", "can1", ccm_base + 0x4350, 0);
> > hws[IMX8MP_CLK_CAN2_ROOT] =
> imx_clk_hw_gate2("can2_root_clk", "can2", ccm_base + 0x4360, 0);
> > hws[IMX8MP_CLK_SDMA1_ROOT] =
> imx_clk_hw_gate4("sdma1_root_clk", "ipg_root", ccm_base + 0x43a0, 0);
> > - hws[IMX8MP_CLK_ENET_QOS_ROOT] =
> imx_clk_hw_gate4("enet_qos_root_clk", "sim_enet_root_clk", ccm_base +
> 0x43b0, 0);
> > hws[IMX8MP_CLK_SIM_ENET_ROOT] =
> > imx_clk_hw_gate4("sim_enet_root_clk", "enet_axi", ccm_base + 0x4400,
> > 0);
> > + hws[IMX8MP_CLK_ENET_QOS_ROOT] =
> > +imx_clk_hw_gate4("enet_qos_root_clk", "sim_enet_root_clk", ccm_base
> +
> > +0x43b0, 0);
> > hws[IMX8MP_CLK_GPU2D_ROOT] =
> imx_clk_hw_gate4("gpu2d_root_clk", "gpu2d_core", ccm_base + 0x4450, 0);
> > hws[IMX8MP_CLK_GPU3D_ROOT] =
> imx_clk_hw_gate4("gpu3d_root_clk", "gpu3d_core", ccm_base + 0x4460, 0);
> > hws[IMX8MP_CLK_UART1_ROOT] =
> imx_clk_hw_gate4("uart1_root_clk",
> > "uart1", ccm_base + 0x4490, 0);
> > --
> > 2.37.1
> >
^ permalink raw reply [flat|nested] 5+ messages in thread* Re: [PATCH V2] clk: imx8mp: tune the order of enet_qos_root_clk
2022-08-15 7:59 ` Peng Fan
@ 2022-08-15 8:22 ` Abel Vesa
0 siblings, 0 replies; 5+ messages in thread
From: Abel Vesa @ 2022-08-15 8:22 UTC (permalink / raw)
To: Peng Fan
Cc: Peng Fan (OSS), abelvesa@kernel.org, mturquette@baylibre.com,
sboyd@kernel.org, shawnguo@kernel.org, s.hauer@pengutronix.de,
kernel@pengutronix.de, festevam@gmail.com, dl-linux-imx,
linux-clk@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, Ye Li
On 22-08-15 07:59:06, Peng Fan wrote:
> Abel,
>
> > Subject: Re: [PATCH V2] clk: imx8mp: tune the order of enet_qos_root_clk
> >
> > On 22-08-15 09:34:28, Peng Fan (OSS) wrote:
> > > From: Peng Fan <peng.fan@nxp.com>
> > >
> > > The enet_qos_root_clk takes sim_enet_root_clk as parent. When
> > > registering enet_qos_root_clk, it will be put into clk orphan list,
> > > because sim_enet_root_clk is not ready.
> > >
> > > When sim_enet_root_clk is ready, clk_core_reparent_orphans_nolock will
> > > set enet_qos_root_clk parent to sim_enet_root_clk.
> > >
> > > Because CLK_OPS_PARENT_ENABLE is set, sim_enet_root_clk will be
> > > enabled and disabled during the enet_qos_root_clk reparent phase.
> > >
> > > All the above are correct. But with M7 booted early and using enet, M7
> > > enet feature will be broken, because clk driver probe phase disable
> > > the needed clks, in case M7 firmware not configure sim_enet_root_clk.
> > >
> > > And tune the order would also save cpu cycles.
> > >
> > > Reviewed-by: Ye Li <ye.li@nxp.com>
> > > Signed-off-by: Peng Fan <peng.fan@nxp.com>
> >
> > Reviewed-by: Abel Vesa <abel.vesa@nxp.com>
> Wrong address?
vim macro issue. Sorry about that.
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
>
> Thanks,
> Peng.
> >
> > > ---
> > >
> > > V2:
> > > Use Abel's new address
> > >
> > > V1:
> > > Patch got reviewed in NXP internal.
> > >
> > > drivers/clk/imx/clk-imx8mp.c | 2 +-
> > > 1 file changed, 1 insertion(+), 1 deletion(-)
> > >
> > > diff --git a/drivers/clk/imx/clk-imx8mp.c
> > > b/drivers/clk/imx/clk-imx8mp.c index e89db568f5a8..652ae58c2735
> > 100644
> > > --- a/drivers/clk/imx/clk-imx8mp.c
> > > +++ b/drivers/clk/imx/clk-imx8mp.c
> > > @@ -665,8 +665,8 @@ static int imx8mp_clocks_probe(struct
> > platform_device *pdev)
> > > hws[IMX8MP_CLK_CAN1_ROOT] =
> > imx_clk_hw_gate2("can1_root_clk", "can1", ccm_base + 0x4350, 0);
> > > hws[IMX8MP_CLK_CAN2_ROOT] =
> > imx_clk_hw_gate2("can2_root_clk", "can2", ccm_base + 0x4360, 0);
> > > hws[IMX8MP_CLK_SDMA1_ROOT] =
> > imx_clk_hw_gate4("sdma1_root_clk", "ipg_root", ccm_base + 0x43a0, 0);
> > > - hws[IMX8MP_CLK_ENET_QOS_ROOT] =
> > imx_clk_hw_gate4("enet_qos_root_clk", "sim_enet_root_clk", ccm_base +
> > 0x43b0, 0);
> > > hws[IMX8MP_CLK_SIM_ENET_ROOT] =
> > > imx_clk_hw_gate4("sim_enet_root_clk", "enet_axi", ccm_base + 0x4400,
> > > 0);
> > > + hws[IMX8MP_CLK_ENET_QOS_ROOT] =
> > > +imx_clk_hw_gate4("enet_qos_root_clk", "sim_enet_root_clk", ccm_base
> > +
> > > +0x43b0, 0);
> > > hws[IMX8MP_CLK_GPU2D_ROOT] =
> > imx_clk_hw_gate4("gpu2d_root_clk", "gpu2d_core", ccm_base + 0x4450, 0);
> > > hws[IMX8MP_CLK_GPU3D_ROOT] =
> > imx_clk_hw_gate4("gpu3d_root_clk", "gpu3d_core", ccm_base + 0x4460, 0);
> > > hws[IMX8MP_CLK_UART1_ROOT] =
> > imx_clk_hw_gate4("uart1_root_clk",
> > > "uart1", ccm_base + 0x4490, 0);
> > > --
> > > 2.37.1
> > >
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH V2] clk: imx8mp: tune the order of enet_qos_root_clk
2022-08-15 1:34 [PATCH V2] clk: imx8mp: tune the order of enet_qos_root_clk Peng Fan (OSS)
2022-08-15 7:58 ` Abel Vesa
@ 2022-09-02 18:18 ` Abel Vesa
1 sibling, 0 replies; 5+ messages in thread
From: Abel Vesa @ 2022-09-02 18:18 UTC (permalink / raw)
To: Peng Fan (OSS)
Cc: abelvesa, mturquette, sboyd, shawnguo, s.hauer, kernel, festevam,
linux-imx, linux-clk, linux-arm-kernel, linux-kernel, Peng Fan,
Ye Li
On 22-08-15 09:34:28, Peng Fan (OSS) wrote:
> From: Peng Fan <peng.fan@nxp.com>
>
> The enet_qos_root_clk takes sim_enet_root_clk as parent. When
> registering enet_qos_root_clk, it will be put into clk orphan list,
> because sim_enet_root_clk is not ready.
>
> When sim_enet_root_clk is ready, clk_core_reparent_orphans_nolock will
> set enet_qos_root_clk parent to sim_enet_root_clk.
>
> Because CLK_OPS_PARENT_ENABLE is set, sim_enet_root_clk will be
> enabled and disabled during the enet_qos_root_clk reparent phase.
>
> All the above are correct. But with M7 booted early and using
> enet, M7 enet feature will be broken, because clk driver probe phase
> disable the needed clks, in case M7 firmware not configure
> sim_enet_root_clk.
>
> And tune the order would also save cpu cycles.
>
> Reviewed-by: Ye Li <ye.li@nxp.com>
> Signed-off-by: Peng Fan <peng.fan@nxp.com>
Applied, thanks.
> ---
>
> V2:
> Use Abel's new address
>
> V1:
> Patch got reviewed in NXP internal.
>
> drivers/clk/imx/clk-imx8mp.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/clk/imx/clk-imx8mp.c b/drivers/clk/imx/clk-imx8mp.c
> index e89db568f5a8..652ae58c2735 100644
> --- a/drivers/clk/imx/clk-imx8mp.c
> +++ b/drivers/clk/imx/clk-imx8mp.c
> @@ -665,8 +665,8 @@ static int imx8mp_clocks_probe(struct platform_device *pdev)
> hws[IMX8MP_CLK_CAN1_ROOT] = imx_clk_hw_gate2("can1_root_clk", "can1", ccm_base + 0x4350, 0);
> hws[IMX8MP_CLK_CAN2_ROOT] = imx_clk_hw_gate2("can2_root_clk", "can2", ccm_base + 0x4360, 0);
> hws[IMX8MP_CLK_SDMA1_ROOT] = imx_clk_hw_gate4("sdma1_root_clk", "ipg_root", ccm_base + 0x43a0, 0);
> - hws[IMX8MP_CLK_ENET_QOS_ROOT] = imx_clk_hw_gate4("enet_qos_root_clk", "sim_enet_root_clk", ccm_base + 0x43b0, 0);
> hws[IMX8MP_CLK_SIM_ENET_ROOT] = imx_clk_hw_gate4("sim_enet_root_clk", "enet_axi", ccm_base + 0x4400, 0);
> + hws[IMX8MP_CLK_ENET_QOS_ROOT] = imx_clk_hw_gate4("enet_qos_root_clk", "sim_enet_root_clk", ccm_base + 0x43b0, 0);
> hws[IMX8MP_CLK_GPU2D_ROOT] = imx_clk_hw_gate4("gpu2d_root_clk", "gpu2d_core", ccm_base + 0x4450, 0);
> hws[IMX8MP_CLK_GPU3D_ROOT] = imx_clk_hw_gate4("gpu3d_root_clk", "gpu3d_core", ccm_base + 0x4460, 0);
> hws[IMX8MP_CLK_UART1_ROOT] = imx_clk_hw_gate4("uart1_root_clk", "uart1", ccm_base + 0x4490, 0);
> --
> 2.37.1
>
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2022-09-02 18:19 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2022-08-15 1:34 [PATCH V2] clk: imx8mp: tune the order of enet_qos_root_clk Peng Fan (OSS)
2022-08-15 7:58 ` Abel Vesa
2022-08-15 7:59 ` Peng Fan
2022-08-15 8:22 ` Abel Vesa
2022-09-02 18:18 ` Abel Vesa
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox