Re: [PATCH 2/2] clk: qcom: gcc-sc7280: Keep USB GDSC power domains on when USB wakeup is enabled

[Matthias Kaehlcke <mka@chromium.org>]

On Wed, Aug 24, 2022 at 10:47:44AM +0200, Johan Hovold wrote:
> On Tue, Aug 23, 2022 at 09:42:53AM -0700, Matthias Kaehlcke wrote:
> > On Tue, Aug 23, 2022 at 01:16:36PM +0200, Johan Hovold wrote:
> > > On Mon, Aug 22, 2022 at 11:53:11AM -0700, Matthias Kaehlcke wrote:
> > > > Set GENPD_FLAG_ACTIVE_WAKEUP for the USB GDSC power domains of SC7280.
> > > > 
> > > > Suggested-by: Johan Hovold <johan+linaro@kernel.org>
> > > > Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
> > > > ---
> > > > 
> > > >  drivers/clk/qcom/gcc-sc7280.c | 2 ++
> > > >  1 file changed, 2 insertions(+)
> > > > 
> > > > diff --git a/drivers/clk/qcom/gcc-sc7280.c b/drivers/clk/qcom/gcc-sc7280.c
> > > > index 7ff64d4d5920..4ff855269467 100644
> > > > --- a/drivers/clk/qcom/gcc-sc7280.c
> > > > +++ b/drivers/clk/qcom/gcc-sc7280.c
> > > > @@ -3125,6 +3125,7 @@ static struct gdsc gcc_usb30_prim_gdsc = {
> > > >  	.gdscr = 0xf004,
> > > >  	.pd = {
> > > >  		.name = "gcc_usb30_prim_gdsc",
> > > > +		.flags = GENPD_FLAG_ACTIVE_WAKEUP,
> > > 
> > > Have you verified that the power-domain doesn't need to remain on also
> > > when USB isn't used for wakeup?
> > 
> > So far I haven't observed issues with this on sc7180 and sc7280 when USB
> > wakeup is disabled.
> 
> Ok, good.
> 
> I would have assumed that it needed to stay always-on before the
> s/device_can_wakeup/device_may_wakeup/ change as before that the PHYs
> would be left on regardless of the (sysfs) wakeup setting.

That make sense, not sure why GENPD_FLAG_ACTIVE_WAKEUP works with wakeup
disabled.

In any case setting the genpd flags directly in the gdsc descriptor doesn't
seem to be the right thing to do. With GENPD_FLAG_ALWAYS_ON my sc7280 system
stalls at boot. It boots when ALWAYS_ON is set in the gdsc flags, which ends
up setting GENPD_FLAG_ALWAYS_ON of the genpd. I'll send a new version of this
series which sets the correct flag.

> > > This is the case for sc8280xp and indicates that there are further
> > > missing pieces here (at least for that platform).
> > 
> > What are you observing on sc8280xp when wakeup is disabled?
> 
> The wakeup setting doesn't seem to have anything to do with the genpd
> issues on sc8280xp and the controller doesn't resume properly regardless
> of whether the PHYs have been disabled or not during suspend unless the
> PD is left on.

I'm essentially seeing the same. USB is hosed after resume unless the PD
is left on.

On Chrome OS we currently work around that with a version of commit
d9be8d5c5b03 ("usb: dwc3: qcom: Keep power domain on to retain controller
status") which was reverted upstream. I'm not sure whether USB worked after
resume before we enabled wakeup support. I would have sworn it did, but we
landed an old version of the wakeup patches a long time ago, so my
memory might be failing me.

I wonder what the status on other QC platforms is, from a quick grep it
seems only msm8953 sets the USB gdsc to ALWAYS_ON.