Re: [PATCH v5 net-next 6/6] selftests: forwarding: add test of MAC-Auth Bypass to locked port tests

[Ido Schimmel <idosch@nvidia.com>]

On Sun, Aug 28, 2022 at 02:00:29PM +0200, netdev@kapio-technology.com wrote:
> On 2022-08-27 20:21, Ido Schimmel wrote:
> > On Fri, Aug 26, 2022 at 01:45:38PM +0200, Hans Schultz wrote:
> > > +locked_port_mab()
> > > +{
> > > +	RET=0
> > > +	check_locked_port_support || return 0
> > > +
> > > +	ping_do $h1 192.0.2.2
> > > +	check_err $? "MAB: Ping did not work before locking port"
> > > +
> > > +	bridge link set dev $swp1 locked on
> > > +	bridge link set dev $swp1 learning on
> > 
> > "locked on learning on" is counter intuitive and IMO very much a
> > misconfiguration that we should have disallowed when the "locked" option
> > was introduced. It is my understanding that the only reason we are even
> > talking about it is because mv88e6xxx needs it for MAB for some reason.
> 
> As the way mv88e6xxx implements "learning off" is to remove port association
> for ingress packets on a port, but that breaks many other things such as
> refreshing ATU entries and violation interrupts, so it is needed and the
> question is then what is the worst to have 'learning on' on a locked port or
> to have the locked port enabling learning in the driver silently?
> 
> Opinions seem to differ. Note that even on locked ports without MAB, port
> association on ingress is still needed in future as I have a dynamic ATU
> patch set coming, that uses age out violation and hardware refreshing to let
> the hardware keep the dynamic entries as long as the authorized station is
> sending, but will age the entry out if the station keeps silent for the
> ageing time. But that patch set is dependent on this patch set, and I don't
> think I can send it before this is accepted...

Can you explain how you envision user space to work once everything is
merged? I want to make sure we have the full picture before more stuff
is merged. From what you describe, I expect the following:

1. Create topology, assuming two unauthorized ports:

# ip link add name br0 type bridge no_linklocal_learn 1 (*)
# ip link set dev swp1 master br0
# ip link set dev swp2 master br0
# bridge link set dev swp1 learning on locked on
# bridge link set dev swp2 learning on locked on
# ip link set dev swp1 up
# ip link set dev swp2 up
# ip link set dev br0 up

2. Assuming h1 behind swp1 was authorized using 802.1X:

# bridge fdb replace $H1_MAC dev swp1 master dynamic

3. Assuming 802.1X authentication failed for h2 behind swp2, enable MAB:

# bridge link set dev swp2 mab on

4. Assuming $H2_MAC is in our allow list:

# bridge fdb replace $H2_MAC dev swp2 master dynamic

Learning is on in order to refresh the dynamic entries that user space
installed.

(*) Need to add support for this option in iproute2. Already exposed
over netlink (see 'IFLA_BR_MULTI_BOOLOPT').