From: Dmitry Torokhov <dmitry.torokhov@gmail.com>
To: Mark Brown <broonie@kernel.org>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>,
linux-spi@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH] spi: spi-mpc52xx: switch to using gpiod API
Date: Thu, 22 Sep 2022 21:51:37 -0700 [thread overview]
Message-ID: <Yy07WbMAG4bPgYNd@google.com> (raw)
This switches the driver to use gpiod API instead of legacy gpio API,
which will brings us close to removing of_get_gpio() and other
OF-specific old APIs.
No functional change intended beyond some differences in error messages.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
---
drivers/spi/spi-mpc52xx.c | 32 +++++++++++++-------------------
1 file changed, 13 insertions(+), 19 deletions(-)
diff --git a/drivers/spi/spi-mpc52xx.c b/drivers/spi/spi-mpc52xx.c
index 97cdd6545ee1..cb075c1acbee 100644
--- a/drivers/spi/spi-mpc52xx.c
+++ b/drivers/spi/spi-mpc52xx.c
@@ -11,6 +11,7 @@
*/
#include <linux/module.h>
+#include <linux/err.h>
#include <linux/errno.h>
#include <linux/of_platform.h>
#include <linux/interrupt.h>
@@ -18,7 +19,6 @@
#include <linux/gpio/consumer.h>
#include <linux/spi/spi.h>
#include <linux/io.h>
-#include <linux/of_gpio.h>
#include <linux/slab.h>
#include <linux/of_address.h>
#include <linux/of_irq.h>
@@ -90,7 +90,7 @@ struct mpc52xx_spi {
const u8 *tx_buf;
int cs_change;
int gpio_cs_count;
- unsigned int *gpio_cs;
+ struct gpio_desc **gpio_cs;
};
/*
@@ -102,9 +102,10 @@ static void mpc52xx_spi_chipsel(struct mpc52xx_spi *ms, int value)
if (ms->gpio_cs_count > 0) {
cs = ms->message->spi->chip_select;
- gpio_set_value(ms->gpio_cs[cs], value ? 0 : 1);
- } else
+ gpiod_set_value(ms->gpio_cs[cs], value);
+ } else {
out_8(ms->regs + SPI_PORTDATA, value ? 0 : 0x08);
+ }
}
/*
@@ -386,10 +387,10 @@ static int mpc52xx_spi_probe(struct platform_device *op)
{
struct spi_master *master;
struct mpc52xx_spi *ms;
+ struct gpio_desc *gpio_cs;
void __iomem *regs;
u8 ctrl1;
int rc, i = 0;
- int gpio_cs;
/* MMIO registers */
dev_dbg(&op->dev, "probing mpc5200 SPI device\n");
@@ -451,23 +452,16 @@ static int mpc52xx_spi_probe(struct platform_device *op)
}
for (i = 0; i < ms->gpio_cs_count; i++) {
- gpio_cs = of_get_gpio(op->dev.of_node, i);
- if (!gpio_is_valid(gpio_cs)) {
- dev_err(&op->dev,
- "could not parse the gpio field in oftree\n");
- rc = -ENODEV;
- goto err_gpio;
- }
-
- rc = gpio_request(gpio_cs, dev_name(&op->dev));
+ gpio_cs = gpiod_get_index(&op->dev,
+ NULL, i, GPIOD_OUT_LOW);
+ rc = PTR_ERR_OR_ZERO(gpio_cs);
if (rc) {
dev_err(&op->dev,
- "can't request spi cs gpio #%d on gpio line %d\n",
- i, gpio_cs);
+ "failed to get spi cs gpio #%d: %d\n",
+ i, rc);
goto err_gpio;
}
- gpio_direction_output(gpio_cs, 1);
ms->gpio_cs[i] = gpio_cs;
}
}
@@ -508,7 +502,7 @@ static int mpc52xx_spi_probe(struct platform_device *op)
dev_err(&ms->master->dev, "initialization failed\n");
err_gpio:
while (i-- > 0)
- gpio_free(ms->gpio_cs[i]);
+ gpiod_put(ms->gpio_cs[i]);
kfree(ms->gpio_cs);
err_alloc_gpio:
@@ -529,7 +523,7 @@ static int mpc52xx_spi_remove(struct platform_device *op)
free_irq(ms->irq1, ms);
for (i = 0; i < ms->gpio_cs_count; i++)
- gpio_free(ms->gpio_cs[i]);
+ gpiod_put(ms->gpio_cs[i]);
kfree(ms->gpio_cs);
spi_unregister_master(master);
--
2.37.3.998.g577e59143f-goog
--
Dmitry
next reply other threads:[~2022-09-23 4:51 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-09-23 4:51 Dmitry Torokhov [this message]
2022-09-23 10:06 ` [PATCH] spi: spi-mpc52xx: switch to using gpiod API Andy Shevchenko
2022-09-23 17:21 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=Yy07WbMAG4bPgYNd@google.com \
--to=dmitry.torokhov@gmail.com \
--cc=andriy.shevchenko@linux.intel.com \
--cc=broonie@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-spi@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox