From: Vinod Koul <vkoul@kernel.org>
To: Linus Torvalds <torvalds@linux-foundation.org>
Cc: LKML <linux-kernel@vger.kernel.org>
Subject: [GIT PULL]: dmaengine subsystem updates for v6.13
Date: Wed, 27 Nov 2024 17:30:57 +0530 [thread overview]
Message-ID: <Z0cJ+c0vvFZIu7I4@vaman> (raw)
[-- Attachment #1: Type: text/plain, Size: 7882 bytes --]
Hey Linus,
Please pull to receive the dmaengine subsystem updates for v6.13. This
includes couple of new device support and updates to bunch of drivers
including the platform_driver remove update.
The following changes since commit 9852d85ec9d492ebef56dc5f229416c925758edc:
Linux 6.12-rc1 (2024-09-29 15:06:19 -0700)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine.git tags/dmaengine-6.13-rc1
for you to fetch changes up to 8974f34de2ef173470a596a4dee22f4922583d1b:
dmaengine: loongson2-apb: Rename the prefix ls2x to loongson2 (2024-10-23 11:05:45 +0530)
----------------------------------------------------------------
dmaengine updates for v6.13
New support:
- Qualcomm SAR2130P GPI dma support
- Sifive PIC64GX pdma support
- Rcar r7s72100 support and associated updates
Updates:
- STM32 DMA3 updates for packing/unpacking mode and prevention of
additional xfers
- Simplification of devm_acpi_dma_controller_register() and associate
cleanup including headers
- loongson prefix renames
- Switch back to platform_driver::remove() subsystem update
----------------------------------------------------------------
Advait Dhamorikar (1):
dmaengine: ep93xx: Fix unsigned compared against 0
Amelie Delaunay (6):
dt-bindings: dma: stm32-dma3: prevent packing/unpacking mode
dmaengine: stm32-dma3: prevent pack/unpack thanks to DT configuration
dmaengine: stm32-dma3: refactor HW linked-list to optimize memory accesses
dt-bindings: dma: stm32-dma3: prevent additional transfers
dmaengine: stm32-dma3: prevent LL refactoring thanks to DT configuration
dmaengine: stm32-dma3: clamp AXI burst using match data
Andy Shevchenko (3):
dmaengine: acpi: Drop unused devm_acpi_dma_controller_free()
dmaengine: acpi: Simplify devm_acpi_dma_controller_register()
dmaengine: acpi: Clean up headers
Binbin Zhou (1):
dmaengine: loongson2-apb: Rename the prefix ls2x to loongson2
Dmitry Baryshkov (1):
dt-bindings: dma: qcom,gpi: Add SAR2130P compatible
Fenghua Yu (1):
dmaengine: idxd: Move DSA/IAA device IDs to IDXD driver
Pierre-Henry Moussay (1):
dt-bindings: dma: sifive pdma: Add PIC64GX to compatibles
Uwe Kleine-König (1):
dmaengine: Switch back to struct platform_driver::remove()
Wolfram Sang (3):
dmaengine: sh: rz-dmac: handle configs where one address is zero
dt-bindings: dma: rz-dmac: Document RZ/A1H SoC
dmaengine: sh: rz-dmac: add r7s72100 support
Yan Zhen (1):
dmaengine: fix typo in the comment
.../devicetree/bindings/dma/qcom,gpi.yaml | 1 +
.../devicetree/bindings/dma/renesas,rz-dmac.yaml | 29 +++--
.../bindings/dma/sifive,fu540-c000-pdma.yaml | 15 ++-
.../bindings/dma/stm32/st,stm32-dma3.yaml | 6 +
Documentation/driver-api/driver-model/devres.rst | 1 -
MAINTAINERS | 4 +-
arch/loongarch/configs/loongson3_defconfig | 2 +-
drivers/dma/Kconfig | 28 ++---
drivers/dma/Makefile | 2 +-
drivers/dma/acpi-dma.c | 43 ++------
drivers/dma/altera-msgdma.c | 2 +-
drivers/dma/amd/qdma/qdma.c | 2 +-
drivers/dma/apple-admac.c | 2 +-
drivers/dma/at_hdmac.c | 2 +-
drivers/dma/at_xdmac.c | 2 +-
drivers/dma/bcm-sba-raid.c | 2 +-
drivers/dma/bcm2835-dma.c | 2 +-
drivers/dma/bestcomm/bestcomm.c | 2 +-
drivers/dma/dma-jz4780.c | 2 +-
drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c | 2 +-
drivers/dma/dw/platform.c | 2 +-
drivers/dma/ep93xx_dma.c | 3 +-
drivers/dma/fsl-edma-main.c | 2 +-
drivers/dma/fsl-qdma.c | 2 +-
drivers/dma/fsl_raid.c | 2 +-
drivers/dma/fsldma.c | 2 +-
drivers/dma/idma64.c | 2 +-
drivers/dma/idxd/registers.h | 4 +
drivers/dma/img-mdc-dma.c | 2 +-
drivers/dma/imx-dma.c | 2 +-
drivers/dma/imx-sdma.c | 2 +-
drivers/dma/k3dma.c | 2 +-
.../dma/{ls2x-apb-dma.c => loongson2-apb-dma.c} | 6 +-
drivers/dma/mcf-edma-main.c | 2 +-
drivers/dma/mediatek/mtk-cqdma.c | 2 +-
drivers/dma/mediatek/mtk-hsdma.c | 2 +-
drivers/dma/mediatek/mtk-uart-apdma.c | 2 +-
drivers/dma/milbeaut-hdmac.c | 2 +-
drivers/dma/milbeaut-xdmac.c | 2 +-
drivers/dma/mmp_pdma.c | 2 +-
drivers/dma/mmp_tdma.c | 2 +-
drivers/dma/moxart-dma.c | 2 +-
drivers/dma/mpc512x_dma.c | 2 +-
drivers/dma/mv_xor_v2.c | 4 +-
drivers/dma/nbpfaxi.c | 2 +-
drivers/dma/owl-dma.c | 2 +-
drivers/dma/ppc4xx/adma.c | 2 +-
drivers/dma/pxa_dma.c | 2 +-
drivers/dma/qcom/bam_dma.c | 2 +-
drivers/dma/qcom/hidma.c | 2 +-
drivers/dma/qcom/qcom_adm.c | 2 +-
drivers/dma/sa11x0-dma.c | 2 +-
drivers/dma/sf-pdma/sf-pdma.c | 4 +-
drivers/dma/sh/Kconfig | 8 +-
drivers/dma/sh/rcar-dmac.c | 2 +-
drivers/dma/sh/rz-dmac.c | 29 ++---
drivers/dma/sh/shdma-base.c | 2 +-
drivers/dma/sh/shdmac.c | 2 +-
drivers/dma/sh/usb-dmac.c | 4 +-
drivers/dma/sprd-dma.c | 2 +-
drivers/dma/st_fdma.c | 2 +-
drivers/dma/stm32/stm32-dma3.c | 121 +++++++++++++++++----
drivers/dma/sun4i-dma.c | 2 +-
drivers/dma/sun6i-dma.c | 2 +-
drivers/dma/tegra186-gpc-dma.c | 2 +-
drivers/dma/tegra20-apb-dma.c | 2 +-
drivers/dma/tegra210-adma.c | 2 +-
drivers/dma/ti/cppi41.c | 2 +-
drivers/dma/ti/edma.c | 2 +-
drivers/dma/ti/omap-dma.c | 2 +-
drivers/dma/timb_dma.c | 2 +-
drivers/dma/txx9dmac.c | 4 +-
drivers/dma/uniphier-mdmac.c | 2 +-
drivers/dma/uniphier-xdmac.c | 2 +-
drivers/dma/xgene-dma.c | 2 +-
drivers/dma/xilinx/xdma.c | 2 +-
drivers/dma/xilinx/xilinx_dma.c | 2 +-
drivers/dma/xilinx/xilinx_dpdma.c | 2 +-
drivers/dma/xilinx/zynqmp_dma.c | 4 +-
include/linux/acpi_dma.h | 9 +-
include/linux/pci_ids.h | 3 -
81 files changed, 266 insertions(+), 184 deletions(-)
rename drivers/dma/{ls2x-apb-dma.c => loongson2-apb-dma.c} (99%)
--
~Vinod
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
next reply other threads:[~2024-11-27 12:01 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-11-27 12:00 Vinod Koul [this message]
2024-11-27 21:41 ` [GIT PULL]: dmaengine subsystem updates for v6.13 pr-tracker-bot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=Z0cJ+c0vvFZIu7I4@vaman \
--to=vkoul@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox