public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Vinod Koul <vkoul@kernel.org>
To: "André Draszik" <andre.draszik@linaro.org>
Cc: Kishon Vijay Abraham I <kishon@kernel.org>,
	Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>,
	Marek Szyprowski <m.szyprowski@samsung.com>,
	Sylwester Nawrocki <s.nawrocki@samsung.com>,
	Alim Akhtar <alim.akhtar@samsung.com>,
	Peter Griffin <peter.griffin@linaro.org>,
	Tudor Ambarus <tudor.ambarus@linaro.org>,
	Sam Protsenko <semen.protsenko@linaro.org>,
	Will McVicker <willmcvicker@google.com>,
	Roy Luo <royluo@google.com>,
	kernel-team@android.com, linux-phy@lists.infradead.org,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-samsung-soc@vger.kernel.org
Subject: Re: [PATCH 8/9] phy: exynos5-usbdrd: subscribe to orientation notifier if required
Date: Wed, 4 Dec 2024 19:40:34 +0530	[thread overview]
Message-ID: <Z1Bi2gRJefYy1tyo@vaman> (raw)
In-Reply-To: <20241127-gs101-phy-lanes-orientation-phy-v1-8-1b7fce24960b@linaro.org>

On 27-11-24, 10:58, André Draszik wrote:
> gs101's SS phy needs to be configured differently based on the
> connector orientation, as the SS link can only be established if the
> mux is configured correctly.
> 
> The code to handle programming of the mux is in place already, this commit
> now adds the missing pieces to subscribe to the Type-C orientation
> switch event.
> 
> Note that for this all to work we rely on the USB controller
> re-initialising us. It should invoke our .exit() upon cable unplug, and
> during cable plug we'll receive the orientation event after which we
> expect our .init() to be called.
> 
> Above reinitialisation happens if the DWC3 controller can enter runtime
> suspend automatically. For the DWC3 driver, this is an opt-in:
>     echo auto > /sys/devices/.../11110000.usb/power/control
> Once done, things work as long as the UDC is not bound as otherwise it
> stays busy because it doesn't cancel / stop outstanding TRBs. For now
> we have to manually unbind the UDC in that case:
>      echo "" > sys/kernel/config/usb_gadget/.../UDC
> 
> Signed-off-by: André Draszik <andre.draszik@linaro.org>
> ---
>  drivers/phy/samsung/Kconfig              |  1 +
>  drivers/phy/samsung/phy-exynos5-usbdrd.c | 60 ++++++++++++++++++++++++++++++++
>  2 files changed, 61 insertions(+)
> 
> diff --git a/drivers/phy/samsung/Kconfig b/drivers/phy/samsung/Kconfig
> index f10afa3d7ff5..fc7bd1088576 100644
> --- a/drivers/phy/samsung/Kconfig
> +++ b/drivers/phy/samsung/Kconfig
> @@ -80,6 +80,7 @@ config PHY_EXYNOS5_USBDRD
>  	tristate "Exynos5 SoC series USB DRD PHY driver"
>  	depends on (ARCH_EXYNOS && OF) || COMPILE_TEST
>  	depends on HAS_IOMEM
> +	depends on TYPEC || (TYPEC=n && COMPILE_TEST)
>  	depends on USB_DWC3_EXYNOS
>  	select GENERIC_PHY
>  	select MFD_SYSCON
> diff --git a/drivers/phy/samsung/phy-exynos5-usbdrd.c b/drivers/phy/samsung/phy-exynos5-usbdrd.c
> index 1a34e9b4618a..2010d25ee817 100644
> --- a/drivers/phy/samsung/phy-exynos5-usbdrd.c
> +++ b/drivers/phy/samsung/phy-exynos5-usbdrd.c
> @@ -394,6 +394,7 @@ struct exynos5_usbdrd_phy_drvdata {
>   * @extrefclk: frequency select settings when using 'separate
>   *	       reference clocks' for SS and HS operations
>   * @regulators: regulators for phy
> + * @sw: TypeC orientation switch handle
>   * @orientation: TypeC connector orientation - normal or flipped
>   */
>  struct exynos5_usbdrd_phy {
> @@ -415,6 +416,7 @@ struct exynos5_usbdrd_phy {
>  	u32 extrefclk;
>  	struct regulator_bulk_data *regulators;
>  
> +	struct typec_switch_dev *sw;
>  	enum typec_orientation orientation;
>  };
>  
> @@ -1400,6 +1402,60 @@ static int exynos5_usbdrd_phy_clk_handle(struct exynos5_usbdrd_phy *phy_drd)
>  	return 0;
>  }
>  
> +#if IS_ENABLED(CONFIG_TYPEC)
> +static int exynos5_usbdrd_orien_sw_set(struct typec_switch_dev *sw,
> +				       enum typec_orientation orientation)
> +{
> +	struct exynos5_usbdrd_phy *phy_drd = typec_switch_get_drvdata(sw);
> +
> +	scoped_guard(mutex, &phy_drd->phy_mutex)
> +		phy_drd->orientation = orientation;
> +
> +	return 0;
> +}
> +
> +static void exynos5_usbdrd_orien_switch_unregister(void *data)
> +{
> +	struct exynos5_usbdrd_phy *phy_drd = data;
> +
> +	typec_switch_unregister(phy_drd->sw);
> +}
> +
> +static int exynos5_usbdrd_setup_notifiers(struct exynos5_usbdrd_phy *phy_drd)
> +{
> +	int ret;
> +
> +	phy_drd->orientation = (enum typec_orientation)-1;

Should this be TYPEC_ORIENTATION_NONE?

> +	if (device_property_present(phy_drd->dev, "orientation-switch")) {
> +		struct typec_switch_desc sw_desc = { };
> +
> +		sw_desc.drvdata = phy_drd;
> +		sw_desc.fwnode = dev_fwnode(phy_drd->dev);
> +		sw_desc.set = exynos5_usbdrd_orien_sw_set;
> +
> +		phy_drd->sw = typec_switch_register(phy_drd->dev, &sw_desc);
> +		if (IS_ERR(phy_drd->sw))
> +			return dev_err_probe(phy_drd->dev,
> +					     PTR_ERR(phy_drd->sw),
> +					     "Failed to register TypeC orientation switch\n");
> +
> +		ret = devm_add_action_or_reset(phy_drd->dev,
> +					       exynos5_usbdrd_orien_switch_unregister,
> +					       phy_drd);
> +		if (ret)
> +			return dev_err_probe(phy_drd->dev, ret,
> +					     "Failed to register TypeC orientation devm action\n");
> +	}
> +
> +	return 0;
> +}
> +#else /* CONFIG_TYPEC */
> +static int exynos5_usbdrd_setup_notifiers(struct exynos5_usbdrd_phy *phy_drd)
> +{
> +	return 0;
> +}
> +#endif /* CONFIG_TYPEC */
> +
>  static const struct exynos5_usbdrd_phy_config phy_cfg_exynos5[] = {
>  	{
>  		.id		= EXYNOS5_DRDPHY_UTMI,
> @@ -1789,6 +1845,10 @@ static int exynos5_usbdrd_phy_probe(struct platform_device *pdev)
>  	if (ret)
>  		return dev_err_probe(dev, ret, "failed to get regulators\n");
>  
> +	ret = exynos5_usbdrd_setup_notifiers(phy_drd);
> +	if (ret)
> +		return ret;
> +
>  	dev_vdbg(dev, "Creating usbdrd_phy phy\n");
>  
>  	for (i = 0; i < EXYNOS5_DRDPHYS_NUM; i++) {
> 
> -- 
> 2.47.0.338.g60cca15819-goog

-- 
~Vinod

  reply	other threads:[~2024-12-04 14:10 UTC|newest]

Thread overview: 28+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-11-27 10:58 [PATCH 0/9] USB31DRD phy updates for Google Tensor gs101 (orientation & DWC3 rpm) André Draszik
2024-11-27 10:58 ` [PATCH 1/9] dt-bindings: phy: samsung,usb3-drd-phy: align to universal style André Draszik
2024-11-29  9:03   ` Peter Griffin
2024-11-27 10:58 ` [PATCH 2/9] dt-bindings: phy: samsung,usb3-drd-phy: add optional orientation-switch André Draszik
2024-11-27 16:00   ` Conor Dooley
2024-11-27 16:02     ` Conor Dooley
2024-11-27 16:27       ` André Draszik
2024-11-27 16:34         ` Conor Dooley
2024-11-27 10:58 ` [PATCH 3/9] dt-bindings: phy: samsung,usb3-drd-phy: gs101: require Type-C properties André Draszik
2024-11-27 16:00   ` Conor Dooley
2024-11-27 16:24     ` André Draszik
2024-11-27 16:34       ` Conor Dooley
2024-11-28 10:54   ` Peter Griffin
2024-11-27 10:58 ` [PATCH 4/9] phy: exynos5-usbdrd: convert to dev_err_probe André Draszik
2024-11-27 19:32   ` Krzysztof Kozlowski
2024-11-28 10:56   ` Peter Griffin
2024-11-27 10:58 ` [PATCH 5/9] phy: exynos5-usbdrd: fix EDS distribution tuning (gs101) André Draszik
2024-11-29  9:22   ` Peter Griffin
2024-11-27 10:58 ` [PATCH 6/9] phy: exynos5-usbdrd: gs101: ensure power is gated to SS phy in phy_exit() André Draszik
2024-11-27 19:42   ` Krzysztof Kozlowski
2024-11-28  6:25     ` André Draszik
2024-11-29  9:33   ` Peter Griffin
2024-11-27 10:58 ` [PATCH 7/9] phy: exynos5-usbdrd: gs101: configure SS lanes based on orientation André Draszik
2024-11-29  9:45   ` Peter Griffin
2024-11-27 10:58 ` [PATCH 8/9] phy: exynos5-usbdrd: subscribe to orientation notifier if required André Draszik
2024-12-04 14:10   ` Vinod Koul [this message]
2024-12-04 15:42     ` André Draszik
2024-11-27 10:58 ` [PATCH 9/9] phy: exynos5-usbdrd: allow DWC3 runtime suspend with UDC bound (E850+) André Draszik

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=Z1Bi2gRJefYy1tyo@vaman \
    --to=vkoul@kernel.org \
    --cc=alim.akhtar@samsung.com \
    --cc=andre.draszik@linaro.org \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=kernel-team@android.com \
    --cc=kishon@kernel.org \
    --cc=krzk+dt@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-phy@lists.infradead.org \
    --cc=linux-samsung-soc@vger.kernel.org \
    --cc=m.szyprowski@samsung.com \
    --cc=peter.griffin@linaro.org \
    --cc=robh@kernel.org \
    --cc=royluo@google.com \
    --cc=s.nawrocki@samsung.com \
    --cc=semen.protsenko@linaro.org \
    --cc=tudor.ambarus@linaro.org \
    --cc=willmcvicker@google.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox