[PATCH v3 0/4] Migrate PCI Endpoint Subsystem tests to Kselftest

[PATCH v3 0/4] Migrate PCI Endpoint Subsystem tests to Kselftest

[Manivannan Sadhasivam]

Hi,

This series carries forward the effort to add Kselftest for PCI Endpoint
Subsystem started by Aman Gupta [1] a while ago. I reworked the initial version
based on another patch that fixes the return values of IOCTLs in
pci_endpoint_test driver and did many cleanups. Since the resulting work
modified the initial version substantially, I took over the authorship.

This series also incorporates the review comment by Shuah Khan [2] to move the
existing tests from 'tools/pci' to 'tools/testing/kselftest/pci_endpoint' before
migrating to Kselftest framework. I made sure that the tests are executable in
each commit and updated documentation accordingly.

NOTE: Patch 1 is strictly not related to this series, but necessary to execute
Kselftests with Qualcomm Endpoint devices. So this can be merged separately.

- Mani

[1] https://lore.kernel.org/linux-pci/20221007053934.5188-1-aman1.gupta@samsung.com
[2] https://lore.kernel.org/linux-pci/b2a5db97-dc59-33ab-71cd-f591e0b1b34d@linuxfoundation.org

Changes in v3:

* Collected tags.
* Added a note about failing testcase 10 and command to skip it in
  documentation.
* Removed Aman Gupta and Padmanabhan Rajanbabu from CC as their addresses are
  bouncing.

Changes in v2:

* Added a patch that fixes return values of IOCTL in pci_endpoint_test driver
* Moved the existing tests to new location before migrating
* Added a fix for BARs on Qcom devices
* Updated documentation and also added fixture variants for memcpy & DMA modes

Manivannan Sadhasivam (4):
  PCI: qcom-ep: Mark BAR0/BAR2 as 64bit BARs and BAR1/BAR3 as RESERVED
  misc: pci_endpoint_test: Fix the return value of IOCTL
  selftests: Move PCI Endpoint tests from tools/pci to Kselftests
  selftests: pci_endpoint: Migrate to Kselftest framework

 Documentation/PCI/endpoint/pci-test-howto.rst | 152 ++++-------
 MAINTAINERS                                   |   2 +-
 drivers/misc/pci_endpoint_test.c              | 236 ++++++++---------
 drivers/pci/controller/dwc/pcie-qcom-ep.c     |   4 +
 tools/pci/Build                               |   1 -
 tools/pci/Makefile                            |  58 ----
 tools/pci/pcitest.c                           | 250 ------------------
 tools/pci/pcitest.sh                          |  72 -----
 tools/testing/selftests/Makefile              |   1 +
 .../testing/selftests/pci_endpoint/.gitignore |   2 +
 tools/testing/selftests/pci_endpoint/Makefile |   7 +
 tools/testing/selftests/pci_endpoint/config   |   4 +
 .../pci_endpoint/pci_endpoint_test.c          | 186 +++++++++++++
 13 files changed, 373 insertions(+), 602 deletions(-)
 delete mode 100644 tools/pci/Build
 delete mode 100644 tools/pci/Makefile
 delete mode 100644 tools/pci/pcitest.c
 delete mode 100644 tools/pci/pcitest.sh
 create mode 100644 tools/testing/selftests/pci_endpoint/.gitignore
 create mode 100644 tools/testing/selftests/pci_endpoint/Makefile
 create mode 100644 tools/testing/selftests/pci_endpoint/config
 create mode 100644 tools/testing/selftests/pci_endpoint/pci_endpoint_test.c

-- 
2.25.1

[PATCH v3 1/4] PCI: qcom-ep: Mark BAR0/BAR2 as 64bit BARs and BAR1/BAR3 as RESERVED

[Manivannan Sadhasivam]

On all Qcom endpoint SoCs, BAR0/BAR2 are 64bit BARs by default and software
cannot change the type. So mark the those BARs as 64bit BARs and also mark
the successive BAR1/BAR3 as RESERVED BARs so that the EPF drivers cannot
use them.

Cc: stable+noautosel@kernel.org # depends on patch introducing only_64bit flag
Fixes: f55fee56a631 ("PCI: qcom-ep: Add Qualcomm PCIe Endpoint controller driver")
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
---
 drivers/pci/controller/dwc/pcie-qcom-ep.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/pci/controller/dwc/pcie-qcom-ep.c b/drivers/pci/controller/dwc/pcie-qcom-ep.c
index e588fcc54589..f925c4ad4294 100644
--- a/drivers/pci/controller/dwc/pcie-qcom-ep.c
+++ b/drivers/pci/controller/dwc/pcie-qcom-ep.c
@@ -823,6 +823,10 @@ static const struct pci_epc_features qcom_pcie_epc_features = {
 	.msi_capable = true,
 	.msix_capable = false,
 	.align = SZ_4K,
+	.bar[BAR_0] = { .only_64bit = true, },
+	.bar[BAR_1] = { .type = BAR_RESERVED, },
+	.bar[BAR_2] = { .only_64bit = true, },
+	.bar[BAR_3] = { .type = BAR_RESERVED, },
 };
 
 static const struct pci_epc_features *
-- 
2.25.1

[PATCH v3 2/4] misc: pci_endpoint_test: Fix the return value of IOCTL

[Manivannan Sadhasivam]

IOCTLs are supposed to return 0 for success and negative error codes for
failure. Currently, this driver is returning 0 for failure and 1 for
success, that's not correct. Hence, fix it!

Reported-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Closes: https://lore.kernel.org/all/YvzNg5ROnxEApDgS@kroah.com
Fixes: 2c156ac71c6b ("misc: Add host side PCI driver for PCI test function device")
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
---
 drivers/misc/pci_endpoint_test.c | 236 +++++++++++++++----------------
 tools/pci/pcitest.c              |  47 +++---
 2 files changed, 140 insertions(+), 143 deletions(-)

diff --git a/drivers/misc/pci_endpoint_test.c b/drivers/misc/pci_endpoint_test.c
index 3aaaf47fa4ee..752fa5fe52d7 100644
--- a/drivers/misc/pci_endpoint_test.c
+++ b/drivers/misc/pci_endpoint_test.c
@@ -166,43 +166,47 @@ static void pci_endpoint_test_free_irq_vectors(struct pci_endpoint_test *test)
 	test->irq_type = IRQ_TYPE_UNDEFINED;
 }
 
-static bool pci_endpoint_test_alloc_irq_vectors(struct pci_endpoint_test *test,
+static int pci_endpoint_test_alloc_irq_vectors(struct pci_endpoint_test *test,
 						int type)
 {
-	int irq = -1;
+	int irq;
 	struct pci_dev *pdev = test->pdev;
 	struct device *dev = &pdev->dev;
-	bool res = true;
 
 	switch (type) {
 	case IRQ_TYPE_INTX:
 		irq = pci_alloc_irq_vectors(pdev, 1, 1, PCI_IRQ_INTX);
-		if (irq < 0)
+		if (irq < 0) {
 			dev_err(dev, "Failed to get Legacy interrupt\n");
+			return -ENOSPC;
+		}
+
 		break;
 	case IRQ_TYPE_MSI:
 		irq = pci_alloc_irq_vectors(pdev, 1, 32, PCI_IRQ_MSI);
-		if (irq < 0)
+		if (irq < 0) {
 			dev_err(dev, "Failed to get MSI interrupts\n");
+			return -ENOSPC;
+		}
+
 		break;
 	case IRQ_TYPE_MSIX:
 		irq = pci_alloc_irq_vectors(pdev, 1, 2048, PCI_IRQ_MSIX);
-		if (irq < 0)
+		if (irq < 0) {
 			dev_err(dev, "Failed to get MSI-X interrupts\n");
+			return -ENOSPC;
+		}
+
 		break;
 	default:
 		dev_err(dev, "Invalid IRQ type selected\n");
-	}
-
-	if (irq < 0) {
-		irq = 0;
-		res = false;
+		return -EINVAL;
 	}
 
 	test->irq_type = type;
 	test->num_irqs = irq;
 
-	return res;
+	return 0;
 }
 
 static void pci_endpoint_test_release_irq(struct pci_endpoint_test *test)
@@ -217,22 +221,22 @@ static void pci_endpoint_test_release_irq(struct pci_endpoint_test *test)
 	test->num_irqs = 0;
 }
 
-static bool pci_endpoint_test_request_irq(struct pci_endpoint_test *test)
+static int pci_endpoint_test_request_irq(struct pci_endpoint_test *test)
 {
 	int i;
-	int err;
+	int ret;
 	struct pci_dev *pdev = test->pdev;
 	struct device *dev = &pdev->dev;
 
 	for (i = 0; i < test->num_irqs; i++) {
-		err = devm_request_irq(dev, pci_irq_vector(pdev, i),
+		ret = devm_request_irq(dev, pci_irq_vector(pdev, i),
 				       pci_endpoint_test_irqhandler,
 				       IRQF_SHARED, test->name, test);
-		if (err)
+		if (ret)
 			goto fail;
 	}
 
-	return true;
+	return 0;
 
 fail:
 	switch (irq_type) {
@@ -252,7 +256,7 @@ static bool pci_endpoint_test_request_irq(struct pci_endpoint_test *test)
 		break;
 	}
 
-	return false;
+	return ret;
 }
 
 static const u32 bar_test_pattern[] = {
@@ -277,7 +281,7 @@ static int pci_endpoint_test_bar_memcmp(struct pci_endpoint_test *test,
 	return memcmp(write_buf, read_buf, size);
 }
 
-static bool pci_endpoint_test_bar(struct pci_endpoint_test *test,
+static int pci_endpoint_test_bar(struct pci_endpoint_test *test,
 				  enum pci_barno barno)
 {
 	int j, bar_size, buf_size, iters, remain;
@@ -286,7 +290,7 @@ static bool pci_endpoint_test_bar(struct pci_endpoint_test *test,
 	struct pci_dev *pdev = test->pdev;
 
 	if (!test->bar[barno])
-		return false;
+		return -ENOMEM;
 
 	bar_size = pci_resource_len(pdev, barno);
 
@@ -301,28 +305,28 @@ static bool pci_endpoint_test_bar(struct pci_endpoint_test *test,
 
 	write_buf = kmalloc(buf_size, GFP_KERNEL);
 	if (!write_buf)
-		return false;
+		return -ENOMEM;
 
 	read_buf = kmalloc(buf_size, GFP_KERNEL);
 	if (!read_buf)
-		return false;
+		return -ENOMEM;
 
 	iters = bar_size / buf_size;
 	for (j = 0; j < iters; j++)
 		if (pci_endpoint_test_bar_memcmp(test, barno, buf_size * j,
 						 write_buf, read_buf, buf_size))
-			return false;
+			return -EIO;
 
 	remain = bar_size % buf_size;
 	if (remain)
 		if (pci_endpoint_test_bar_memcmp(test, barno, buf_size * iters,
 						 write_buf, read_buf, remain))
-			return false;
+			return -EIO;
 
-	return true;
+	return 0;
 }
 
-static bool pci_endpoint_test_intx_irq(struct pci_endpoint_test *test)
+static int pci_endpoint_test_intx_irq(struct pci_endpoint_test *test)
 {
 	u32 val;
 
@@ -334,12 +338,12 @@ static bool pci_endpoint_test_intx_irq(struct pci_endpoint_test *test)
 	val = wait_for_completion_timeout(&test->irq_raised,
 					  msecs_to_jiffies(1000));
 	if (!val)
-		return false;
+		return -ETIMEDOUT;
 
-	return true;
+	return 0;
 }
 
-static bool pci_endpoint_test_msi_irq(struct pci_endpoint_test *test,
+static int pci_endpoint_test_msi_irq(struct pci_endpoint_test *test,
 				       u16 msi_num, bool msix)
 {
 	u32 val;
@@ -354,9 +358,12 @@ static bool pci_endpoint_test_msi_irq(struct pci_endpoint_test *test,
 	val = wait_for_completion_timeout(&test->irq_raised,
 					  msecs_to_jiffies(1000));
 	if (!val)
-		return false;
+		return -ETIMEDOUT;
 
-	return pci_irq_vector(pdev, msi_num - 1) == test->last_irq;
+	if (!(pci_irq_vector(pdev, msi_num - 1) == test->last_irq))
+		return -EIO;
+
+	return 0;
 }
 
 static int pci_endpoint_test_validate_xfer_params(struct device *dev,
@@ -375,11 +382,10 @@ static int pci_endpoint_test_validate_xfer_params(struct device *dev,
 	return 0;
 }
 
-static bool pci_endpoint_test_copy(struct pci_endpoint_test *test,
+static int pci_endpoint_test_copy(struct pci_endpoint_test *test,
 				   unsigned long arg)
 {
 	struct pci_endpoint_test_xfer_param param;
-	bool ret = false;
 	void *src_addr;
 	void *dst_addr;
 	u32 flags = 0;
@@ -398,17 +404,17 @@ static bool pci_endpoint_test_copy(struct pci_endpoint_test *test,
 	int irq_type = test->irq_type;
 	u32 src_crc32;
 	u32 dst_crc32;
-	int err;
+	int ret;
 
-	err = copy_from_user(&param, (void __user *)arg, sizeof(param));
-	if (err) {
+	ret = copy_from_user(&param, (void __user *)arg, sizeof(param));
+	if (ret) {
 		dev_err(dev, "Failed to get transfer param\n");
-		return false;
+		return -EFAULT;
 	}
 
-	err = pci_endpoint_test_validate_xfer_params(dev, &param, alignment);
-	if (err)
-		return false;
+	ret = pci_endpoint_test_validate_xfer_params(dev, &param, alignment);
+	if (ret)
+		return ret;
 
 	size = param.size;
 
@@ -418,22 +424,21 @@ static bool pci_endpoint_test_copy(struct pci_endpoint_test *test,
 
 	if (irq_type < IRQ_TYPE_INTX || irq_type > IRQ_TYPE_MSIX) {
 		dev_err(dev, "Invalid IRQ type option\n");
-		goto err;
+		return -EINVAL;
 	}
 
 	orig_src_addr = kzalloc(size + alignment, GFP_KERNEL);
 	if (!orig_src_addr) {
 		dev_err(dev, "Failed to allocate source buffer\n");
-		ret = false;
-		goto err;
+		return -ENOMEM;
 	}
 
 	get_random_bytes(orig_src_addr, size + alignment);
 	orig_src_phys_addr = dma_map_single(dev, orig_src_addr,
 					    size + alignment, DMA_TO_DEVICE);
-	if (dma_mapping_error(dev, orig_src_phys_addr)) {
+	ret = dma_mapping_error(dev, orig_src_phys_addr);
+	if (ret) {
 		dev_err(dev, "failed to map source buffer address\n");
-		ret = false;
 		goto err_src_phys_addr;
 	}
 
@@ -457,15 +462,15 @@ static bool pci_endpoint_test_copy(struct pci_endpoint_test *test,
 	orig_dst_addr = kzalloc(size + alignment, GFP_KERNEL);
 	if (!orig_dst_addr) {
 		dev_err(dev, "Failed to allocate destination address\n");
-		ret = false;
+		ret = -ENOMEM;
 		goto err_dst_addr;
 	}
 
 	orig_dst_phys_addr = dma_map_single(dev, orig_dst_addr,
 					    size + alignment, DMA_FROM_DEVICE);
-	if (dma_mapping_error(dev, orig_dst_phys_addr)) {
+	ret = dma_mapping_error(dev, orig_dst_phys_addr);
+	if (ret) {
 		dev_err(dev, "failed to map destination buffer address\n");
-		ret = false;
 		goto err_dst_phys_addr;
 	}
 
@@ -498,8 +503,8 @@ static bool pci_endpoint_test_copy(struct pci_endpoint_test *test,
 			 DMA_FROM_DEVICE);
 
 	dst_crc32 = crc32_le(~0, dst_addr, size);
-	if (dst_crc32 == src_crc32)
-		ret = true;
+	if (dst_crc32 != src_crc32)
+		ret = -EIO;
 
 err_dst_phys_addr:
 	kfree(orig_dst_addr);
@@ -510,16 +515,13 @@ static bool pci_endpoint_test_copy(struct pci_endpoint_test *test,
 
 err_src_phys_addr:
 	kfree(orig_src_addr);
-
-err:
 	return ret;
 }
 
-static bool pci_endpoint_test_write(struct pci_endpoint_test *test,
+static int pci_endpoint_test_write(struct pci_endpoint_test *test,
 				    unsigned long arg)
 {
 	struct pci_endpoint_test_xfer_param param;
-	bool ret = false;
 	u32 flags = 0;
 	bool use_dma;
 	u32 reg;
@@ -534,17 +536,17 @@ static bool pci_endpoint_test_write(struct pci_endpoint_test *test,
 	int irq_type = test->irq_type;
 	size_t size;
 	u32 crc32;
-	int err;
+	int ret;
 
-	err = copy_from_user(&param, (void __user *)arg, sizeof(param));
-	if (err != 0) {
+	ret = copy_from_user(&param, (void __user *)arg, sizeof(param));
+	if (ret) {
 		dev_err(dev, "Failed to get transfer param\n");
-		return false;
+		return -EFAULT;
 	}
 
-	err = pci_endpoint_test_validate_xfer_params(dev, &param, alignment);
-	if (err)
-		return false;
+	ret = pci_endpoint_test_validate_xfer_params(dev, &param, alignment);
+	if (ret)
+		return ret;
 
 	size = param.size;
 
@@ -554,23 +556,22 @@ static bool pci_endpoint_test_write(struct pci_endpoint_test *test,
 
 	if (irq_type < IRQ_TYPE_INTX || irq_type > IRQ_TYPE_MSIX) {
 		dev_err(dev, "Invalid IRQ type option\n");
-		goto err;
+		return -EINVAL;
 	}
 
 	orig_addr = kzalloc(size + alignment, GFP_KERNEL);
 	if (!orig_addr) {
 		dev_err(dev, "Failed to allocate address\n");
-		ret = false;
-		goto err;
+		return -ENOMEM;
 	}
 
 	get_random_bytes(orig_addr, size + alignment);
 
 	orig_phys_addr = dma_map_single(dev, orig_addr, size + alignment,
 					DMA_TO_DEVICE);
-	if (dma_mapping_error(dev, orig_phys_addr)) {
+	ret = dma_mapping_error(dev, orig_phys_addr);
+	if (ret) {
 		dev_err(dev, "failed to map source buffer address\n");
-		ret = false;
 		goto err_phys_addr;
 	}
 
@@ -603,24 +604,21 @@ static bool pci_endpoint_test_write(struct pci_endpoint_test *test,
 	wait_for_completion(&test->irq_raised);
 
 	reg = pci_endpoint_test_readl(test, PCI_ENDPOINT_TEST_STATUS);
-	if (reg & STATUS_READ_SUCCESS)
-		ret = true;
+	if (!(reg & STATUS_READ_SUCCESS))
+		ret = -EIO;
 
 	dma_unmap_single(dev, orig_phys_addr, size + alignment,
 			 DMA_TO_DEVICE);
 
 err_phys_addr:
 	kfree(orig_addr);
-
-err:
 	return ret;
 }
 
-static bool pci_endpoint_test_read(struct pci_endpoint_test *test,
+static int pci_endpoint_test_read(struct pci_endpoint_test *test,
 				   unsigned long arg)
 {
 	struct pci_endpoint_test_xfer_param param;
-	bool ret = false;
 	u32 flags = 0;
 	bool use_dma;
 	size_t size;
@@ -634,17 +632,17 @@ static bool pci_endpoint_test_read(struct pci_endpoint_test *test,
 	size_t alignment = test->alignment;
 	int irq_type = test->irq_type;
 	u32 crc32;
-	int err;
+	int ret;
 
-	err = copy_from_user(&param, (void __user *)arg, sizeof(param));
-	if (err) {
+	ret = copy_from_user(&param, (void __user *)arg, sizeof(param));
+	if (ret) {
 		dev_err(dev, "Failed to get transfer param\n");
-		return false;
+		return -EFAULT;
 	}
 
-	err = pci_endpoint_test_validate_xfer_params(dev, &param, alignment);
-	if (err)
-		return false;
+	ret = pci_endpoint_test_validate_xfer_params(dev, &param, alignment);
+	if (ret)
+		return ret;
 
 	size = param.size;
 
@@ -654,21 +652,20 @@ static bool pci_endpoint_test_read(struct pci_endpoint_test *test,
 
 	if (irq_type < IRQ_TYPE_INTX || irq_type > IRQ_TYPE_MSIX) {
 		dev_err(dev, "Invalid IRQ type option\n");
-		goto err;
+		return -EINVAL;
 	}
 
 	orig_addr = kzalloc(size + alignment, GFP_KERNEL);
 	if (!orig_addr) {
 		dev_err(dev, "Failed to allocate destination address\n");
-		ret = false;
-		goto err;
+		return -ENOMEM;
 	}
 
 	orig_phys_addr = dma_map_single(dev, orig_addr, size + alignment,
 					DMA_FROM_DEVICE);
-	if (dma_mapping_error(dev, orig_phys_addr)) {
+	ret = dma_mapping_error(dev, orig_phys_addr);
+	if (ret) {
 		dev_err(dev, "failed to map source buffer address\n");
-		ret = false;
 		goto err_phys_addr;
 	}
 
@@ -700,50 +697,51 @@ static bool pci_endpoint_test_read(struct pci_endpoint_test *test,
 			 DMA_FROM_DEVICE);
 
 	crc32 = crc32_le(~0, addr, size);
-	if (crc32 == pci_endpoint_test_readl(test, PCI_ENDPOINT_TEST_CHECKSUM))
-		ret = true;
+	if (crc32 != pci_endpoint_test_readl(test, PCI_ENDPOINT_TEST_CHECKSUM))
+		ret = -EIO;
 
 err_phys_addr:
 	kfree(orig_addr);
-err:
 	return ret;
 }
 
-static bool pci_endpoint_test_clear_irq(struct pci_endpoint_test *test)
+static int pci_endpoint_test_clear_irq(struct pci_endpoint_test *test)
 {
 	pci_endpoint_test_release_irq(test);
 	pci_endpoint_test_free_irq_vectors(test);
-	return true;
+
+	return 0;
 }
 
-static bool pci_endpoint_test_set_irq(struct pci_endpoint_test *test,
+static int pci_endpoint_test_set_irq(struct pci_endpoint_test *test,
 				      int req_irq_type)
 {
 	struct pci_dev *pdev = test->pdev;
 	struct device *dev = &pdev->dev;
+	int ret;
 
 	if (req_irq_type < IRQ_TYPE_INTX || req_irq_type > IRQ_TYPE_MSIX) {
 		dev_err(dev, "Invalid IRQ type option\n");
-		return false;
+		return -EINVAL;
 	}
 
 	if (test->irq_type == req_irq_type)
-		return true;
+		return 0;
 
 	pci_endpoint_test_release_irq(test);
 	pci_endpoint_test_free_irq_vectors(test);
 
-	if (!pci_endpoint_test_alloc_irq_vectors(test, req_irq_type))
-		goto err;
-
-	if (!pci_endpoint_test_request_irq(test))
-		goto err;
+	ret = pci_endpoint_test_alloc_irq_vectors(test, req_irq_type);
+	if (ret)
+		return ret;
 
-	return true;
+	ret = pci_endpoint_test_request_irq(test);
+	if (ret) {
+		pci_endpoint_test_free_irq_vectors(test);
+		return ret;
+	}
 
-err:
-	pci_endpoint_test_free_irq_vectors(test);
-	return false;
+	return 0;
 }
 
 static long pci_endpoint_test_ioctl(struct file *file, unsigned int cmd,
@@ -808,7 +806,7 @@ static const struct file_operations pci_endpoint_test_fops = {
 static int pci_endpoint_test_probe(struct pci_dev *pdev,
 				   const struct pci_device_id *ent)
 {
-	int err;
+	int ret;
 	int id;
 	char name[24];
 	enum pci_barno bar;
@@ -847,24 +845,23 @@ static int pci_endpoint_test_probe(struct pci_dev *pdev,
 
 	dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(48));
 
-	err = pci_enable_device(pdev);
-	if (err) {
+	ret = pci_enable_device(pdev);
+	if (ret) {
 		dev_err(dev, "Cannot enable PCI device\n");
-		return err;
+		return ret;
 	}
 
-	err = pci_request_regions(pdev, DRV_MODULE_NAME);
-	if (err) {
+	ret = pci_request_regions(pdev, DRV_MODULE_NAME);
+	if (ret) {
 		dev_err(dev, "Cannot obtain PCI resources\n");
 		goto err_disable_pdev;
 	}
 
 	pci_set_master(pdev);
 
-	if (!pci_endpoint_test_alloc_irq_vectors(test, irq_type)) {
-		err = -EINVAL;
+	ret = pci_endpoint_test_alloc_irq_vectors(test, irq_type);
+	if (ret)
 		goto err_disable_irq;
-	}
 
 	for (bar = 0; bar < PCI_STD_NUM_BARS; bar++) {
 		if (pci_resource_flags(pdev, bar) & IORESOURCE_MEM) {
@@ -879,7 +876,7 @@ static int pci_endpoint_test_probe(struct pci_dev *pdev,
 
 	test->base = test->bar[test_reg_bar];
 	if (!test->base) {
-		err = -ENOMEM;
+		ret = -ENOMEM;
 		dev_err(dev, "Cannot perform PCI test without BAR%d\n",
 			test_reg_bar);
 		goto err_iounmap;
@@ -889,7 +886,7 @@ static int pci_endpoint_test_probe(struct pci_dev *pdev,
 
 	id = ida_alloc(&pci_endpoint_test_ida, GFP_KERNEL);
 	if (id < 0) {
-		err = id;
+		ret = id;
 		dev_err(dev, "Unable to get id\n");
 		goto err_iounmap;
 	}
@@ -897,27 +894,26 @@ static int pci_endpoint_test_probe(struct pci_dev *pdev,
 	snprintf(name, sizeof(name), DRV_MODULE_NAME ".%d", id);
 	test->name = kstrdup(name, GFP_KERNEL);
 	if (!test->name) {
-		err = -ENOMEM;
+		ret = -ENOMEM;
 		goto err_ida_remove;
 	}
 
-	if (!pci_endpoint_test_request_irq(test)) {
-		err = -EINVAL;
+	ret = pci_endpoint_test_request_irq(test);
+	if (ret)
 		goto err_kfree_test_name;
-	}
 
 	misc_device = &test->miscdev;
 	misc_device->minor = MISC_DYNAMIC_MINOR;
 	misc_device->name = kstrdup(name, GFP_KERNEL);
 	if (!misc_device->name) {
-		err = -ENOMEM;
+		ret = -ENOMEM;
 		goto err_release_irq;
 	}
 	misc_device->parent = &pdev->dev;
 	misc_device->fops = &pci_endpoint_test_fops;
 
-	err = misc_register(misc_device);
-	if (err) {
+	ret = misc_register(misc_device);
+	if (ret) {
 		dev_err(dev, "Failed to register device\n");
 		goto err_kfree_name;
 	}
@@ -949,7 +945,7 @@ static int pci_endpoint_test_probe(struct pci_dev *pdev,
 err_disable_pdev:
 	pci_disable_device(pdev);
 
-	return err;
+	return ret;
 }
 
 static void pci_endpoint_test_remove(struct pci_dev *pdev)
diff --git a/tools/pci/pcitest.c b/tools/pci/pcitest.c
index 470258009ddc..545e04ad63a2 100644
--- a/tools/pci/pcitest.c
+++ b/tools/pci/pcitest.c
@@ -16,7 +16,6 @@
 
 #include <linux/pcitest.h>
 
-static char *result[] = { "NOT OKAY", "OKAY" };
 static char *irq[] = { "LEGACY", "MSI", "MSI-X" };
 
 struct pci_test {
@@ -52,63 +51,65 @@ static int run_test(struct pci_test *test)
 		ret = ioctl(fd, PCITEST_BAR, test->barnum);
 		fprintf(stdout, "BAR%d:\t\t", test->barnum);
 		if (ret < 0)
-			fprintf(stdout, "TEST FAILED\n");
+			fprintf(stdout, "NOT OKAY\n");
 		else
-			fprintf(stdout, "%s\n", result[ret]);
+			fprintf(stdout, "OKAY\n");
 	}
 
 	if (test->set_irqtype) {
 		ret = ioctl(fd, PCITEST_SET_IRQTYPE, test->irqtype);
 		fprintf(stdout, "SET IRQ TYPE TO %s:\t\t", irq[test->irqtype]);
 		if (ret < 0)
-			fprintf(stdout, "FAILED\n");
+			fprintf(stdout, "NOT OKAY\n");
 		else
-			fprintf(stdout, "%s\n", result[ret]);
+			fprintf(stdout, "OKAY\n");
 	}
 
 	if (test->get_irqtype) {
 		ret = ioctl(fd, PCITEST_GET_IRQTYPE);
 		fprintf(stdout, "GET IRQ TYPE:\t\t");
-		if (ret < 0)
-			fprintf(stdout, "FAILED\n");
-		else
+		if (ret < 0) {
+			fprintf(stdout, "NOT OKAY\n");
+		} else {
 			fprintf(stdout, "%s\n", irq[ret]);
+			ret = 0;
+		}
 	}
 
 	if (test->clear_irq) {
 		ret = ioctl(fd, PCITEST_CLEAR_IRQ);
 		fprintf(stdout, "CLEAR IRQ:\t\t");
 		if (ret < 0)
-			fprintf(stdout, "FAILED\n");
+			fprintf(stdout, "NOT OKAY\n");
 		else
-			fprintf(stdout, "%s\n", result[ret]);
+			fprintf(stdout, "OKAY\n");
 	}
 
 	if (test->legacyirq) {
 		ret = ioctl(fd, PCITEST_LEGACY_IRQ, 0);
 		fprintf(stdout, "LEGACY IRQ:\t");
 		if (ret < 0)
-			fprintf(stdout, "TEST FAILED\n");
+			fprintf(stdout, "NOT OKAY\n");
 		else
-			fprintf(stdout, "%s\n", result[ret]);
+			fprintf(stdout, "OKAY\n");
 	}
 
 	if (test->msinum > 0 && test->msinum <= 32) {
 		ret = ioctl(fd, PCITEST_MSI, test->msinum);
 		fprintf(stdout, "MSI%d:\t\t", test->msinum);
 		if (ret < 0)
-			fprintf(stdout, "TEST FAILED\n");
+			fprintf(stdout, "NOT OKAY\n");
 		else
-			fprintf(stdout, "%s\n", result[ret]);
+			fprintf(stdout, "OKAY\n");
 	}
 
 	if (test->msixnum > 0 && test->msixnum <= 2048) {
 		ret = ioctl(fd, PCITEST_MSIX, test->msixnum);
 		fprintf(stdout, "MSI-X%d:\t\t", test->msixnum);
 		if (ret < 0)
-			fprintf(stdout, "TEST FAILED\n");
+			fprintf(stdout, "NOT OKAY\n");
 		else
-			fprintf(stdout, "%s\n", result[ret]);
+			fprintf(stdout, "OKAY\n");
 	}
 
 	if (test->write) {
@@ -118,9 +119,9 @@ static int run_test(struct pci_test *test)
 		ret = ioctl(fd, PCITEST_WRITE, &param);
 		fprintf(stdout, "WRITE (%7ld bytes):\t\t", test->size);
 		if (ret < 0)
-			fprintf(stdout, "TEST FAILED\n");
+			fprintf(stdout, "NOT OKAY\n");
 		else
-			fprintf(stdout, "%s\n", result[ret]);
+			fprintf(stdout, "OKAY\n");
 	}
 
 	if (test->read) {
@@ -130,9 +131,9 @@ static int run_test(struct pci_test *test)
 		ret = ioctl(fd, PCITEST_READ, &param);
 		fprintf(stdout, "READ (%7ld bytes):\t\t", test->size);
 		if (ret < 0)
-			fprintf(stdout, "TEST FAILED\n");
+			fprintf(stdout, "NOT OKAY\n");
 		else
-			fprintf(stdout, "%s\n", result[ret]);
+			fprintf(stdout, "OKAY\n");
 	}
 
 	if (test->copy) {
@@ -142,14 +143,14 @@ static int run_test(struct pci_test *test)
 		ret = ioctl(fd, PCITEST_COPY, &param);
 		fprintf(stdout, "COPY (%7ld bytes):\t\t", test->size);
 		if (ret < 0)
-			fprintf(stdout, "TEST FAILED\n");
+			fprintf(stdout, "NOT OKAY\n");
 		else
-			fprintf(stdout, "%s\n", result[ret]);
+			fprintf(stdout, "OKAY\n");
 	}
 
 	fflush(stdout);
 	close(fd);
-	return (ret < 0) ? ret : 1 - ret; /* return 0 if test succeeded */
+	return ret;
 }
 
 int main(int argc, char **argv)
-- 
2.25.1

[PATCH v3 3/4] selftests: Move PCI Endpoint tests from tools/pci to Kselftests

[Manivannan Sadhasivam]

This just moves the existing tests under tools/pci to
tools/testing/selftests/pci_endpoint and adjusts the paths in Makefile
accordingly. Migration to Kselftest framework will be done in subsequent
commits.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
---
 Documentation/PCI/endpoint/pci-test-howto.rst          |  9 +++++----
 MAINTAINERS                                            |  2 +-
 tools/testing/selftests/pci_endpoint/.gitignore        |  3 +++
 tools/{pci => testing/selftests/pci_endpoint}/Build    |  0
 tools/{pci => testing/selftests/pci_endpoint}/Makefile | 10 +++++-----
 .../{pci => testing/selftests/pci_endpoint}/pcitest.c  |  0
 .../{pci => testing/selftests/pci_endpoint}/pcitest.sh |  0
 7 files changed, 14 insertions(+), 10 deletions(-)
 create mode 100644 tools/testing/selftests/pci_endpoint/.gitignore
 rename tools/{pci => testing/selftests/pci_endpoint}/Build (100%)
 rename tools/{pci => testing/selftests/pci_endpoint}/Makefile (83%)
 rename tools/{pci => testing/selftests/pci_endpoint}/pcitest.c (100%)
 rename tools/{pci => testing/selftests/pci_endpoint}/pcitest.sh (100%)

diff --git a/Documentation/PCI/endpoint/pci-test-howto.rst b/Documentation/PCI/endpoint/pci-test-howto.rst
index 909f770a07d6..c4ae7af50ede 100644
--- a/Documentation/PCI/endpoint/pci-test-howto.rst
+++ b/Documentation/PCI/endpoint/pci-test-howto.rst
@@ -123,16 +123,17 @@ above::
 Using Endpoint Test function Device
 -----------------------------------
 
-pcitest.sh added in tools/pci/ can be used to run all the default PCI endpoint
-tests. To compile this tool the following commands should be used::
+pcitest.sh added in tools/testing/selftests/pci_endpoint can be used to run all
+the default PCI endpoint tests. To compile this tool the following commands
+should be used::
 
 	# cd <kernel-dir>
-	# make -C tools/pci
+	# make -C tools/testing/selftests/pci_endpoint
 
 or if you desire to compile and install in your system::
 
 	# cd <kernel-dir>
-	# make -C tools/pci install
+	# make -C tools/testing/selftests/pci_endpoint install
 
 The tool and script will be located in <rootfs>/usr/bin/
 
diff --git a/MAINTAINERS b/MAINTAINERS
index 21fdaa19229a..f116f78a2ec5 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -17794,7 +17794,7 @@ F:	Documentation/PCI/endpoint/*
 F:	Documentation/misc-devices/pci-endpoint-test.rst
 F:	drivers/misc/pci_endpoint_test.c
 F:	drivers/pci/endpoint/
-F:	tools/pci/
+F:	tools/testing/selftests/pci_endpoint/
 
 PCI ENHANCED ERROR HANDLING (EEH) FOR POWERPC
 M:	Mahesh J Salgaonkar <mahesh@linux.ibm.com>
diff --git a/tools/testing/selftests/pci_endpoint/.gitignore b/tools/testing/selftests/pci_endpoint/.gitignore
new file mode 100644
index 000000000000..29ab47c48484
--- /dev/null
+++ b/tools/testing/selftests/pci_endpoint/.gitignore
@@ -0,0 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0-only
+*.o
+pcitest
diff --git a/tools/pci/Build b/tools/testing/selftests/pci_endpoint/Build
similarity index 100%
rename from tools/pci/Build
rename to tools/testing/selftests/pci_endpoint/Build
diff --git a/tools/pci/Makefile b/tools/testing/selftests/pci_endpoint/Makefile
similarity index 83%
rename from tools/pci/Makefile
rename to tools/testing/selftests/pci_endpoint/Makefile
index 62d41f1a1e2c..3c6fe18e32cc 100644
--- a/tools/pci/Makefile
+++ b/tools/testing/selftests/pci_endpoint/Makefile
@@ -1,11 +1,10 @@
 # SPDX-License-Identifier: GPL-2.0
-include ../scripts/Makefile.include
+include ../../../scripts/Makefile.include
 
 bindir ?= /usr/bin
 
 ifeq ($(srctree),)
-srctree := $(patsubst %/,%,$(dir $(CURDIR)))
-srctree := $(patsubst %/,%,$(dir $(srctree)))
+srctree := $(patsubst %/tools/testing/selftests/,%,$(dir $(CURDIR)))
 endif
 
 # Do not use make's built-in rules
@@ -27,10 +26,11 @@ include $(srctree)/tools/build/Makefile.include
 #
 # We need the following to be outside of kernel tree
 #
-$(OUTPUT)include/linux/: ../../include/uapi/linux/
+$(OUTPUT)include/linux/: ../../../../include/uapi/linux/
 	mkdir -p $(OUTPUT)include/linux/ 2>&1 || true
-	ln -sf $(CURDIR)/../../include/uapi/linux/pcitest.h $@
+	ln -sf $(CURDIR)/../../../../include/uapi/linux/pcitest.h $@
 
+$(info ${CURDIR})
 prepare: $(OUTPUT)include/linux/
 
 PCITEST_IN := $(OUTPUT)pcitest-in.o
diff --git a/tools/pci/pcitest.c b/tools/testing/selftests/pci_endpoint/pcitest.c
similarity index 100%
rename from tools/pci/pcitest.c
rename to tools/testing/selftests/pci_endpoint/pcitest.c
diff --git a/tools/pci/pcitest.sh b/tools/testing/selftests/pci_endpoint/pcitest.sh
similarity index 100%
rename from tools/pci/pcitest.sh
rename to tools/testing/selftests/pci_endpoint/pcitest.sh
-- 
2.25.1

[PATCH v3 4/4] selftests: pci_endpoint: Migrate to Kselftest framework

[Manivannan Sadhasivam]

Migrate the PCI endpoint test to Kselftest framework. All the tests that
were part of the previous pcitest.sh file were migrated.

Below is the exclusive list of tests:

1. BAR Tests (BAR0 to BAR5)
2. Legacy IRQ Tests
3. MSI Interrupt Tests (MSI1 to MSI32)
4. MSI-X Interrupt Tests (MSI-X1 to MSI-X2048)
5. Read Tests - MEMCPY (For 1, 1024, 1025, 1024000, 1024001 Bytes)
6. Write Tests - MEMCPY (For 1, 1024, 1025, 1024000, 1024001 Bytes)
7. Copy Tests - MEMCPY (For 1, 1024, 1025, 1024000, 1024001 Bytes)
8. Read Tests - DMA (For 1, 1024, 1025, 1024000, 1024001 Bytes)
9. Write Tests - DMA (For 1, 1024, 1025, 1024000, 1024001 Bytes)
10. Copy Tests - DMA (For 1, 1024, 1025, 1024000, 1024001 Bytes)

DMA and MEMCPY tests are added as fixture variants and can be executed
separately as below:

$ pci_endpoint_test -V dma (excluding DMA tests)
$ pci_endpoint_test -V memcpy (excluding MEMCPY tests)

Co-developed-by: Aman Gupta <aman1.gupta@samsung.com>
Signed-off-by: Aman Gupta <aman1.gupta@samsung.com>
Co-developed-by: Padmanabhan Rajanbabu <p.rajanbabu@samsung.com>
Signed-off-by: Padmanabhan Rajanbabu <p.rajanbabu@samsung.com>
[mani: reworked based on the IOCTL fix, cleanups, documentation, commit message]
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
---
 Documentation/PCI/endpoint/pci-test-howto.rst | 151 ++++-------
 tools/testing/selftests/Makefile              |   1 +
 .../testing/selftests/pci_endpoint/.gitignore |   3 +-
 tools/testing/selftests/pci_endpoint/Build    |   1 -
 tools/testing/selftests/pci_endpoint/Makefile |  59 +---
 tools/testing/selftests/pci_endpoint/config   |   4 +
 .../pci_endpoint/pci_endpoint_test.c          | 186 +++++++++++++
 .../testing/selftests/pci_endpoint/pcitest.c  | 251 ------------------
 .../testing/selftests/pci_endpoint/pcitest.sh |  72 -----
 9 files changed, 247 insertions(+), 481 deletions(-)
 delete mode 100644 tools/testing/selftests/pci_endpoint/Build
 create mode 100644 tools/testing/selftests/pci_endpoint/config
 create mode 100644 tools/testing/selftests/pci_endpoint/pci_endpoint_test.c
 delete mode 100644 tools/testing/selftests/pci_endpoint/pcitest.c
 delete mode 100644 tools/testing/selftests/pci_endpoint/pcitest.sh

diff --git a/Documentation/PCI/endpoint/pci-test-howto.rst b/Documentation/PCI/endpoint/pci-test-howto.rst
index c4ae7af50ede..a1860556c639 100644
--- a/Documentation/PCI/endpoint/pci-test-howto.rst
+++ b/Documentation/PCI/endpoint/pci-test-howto.rst
@@ -123,9 +123,9 @@ above::
 Using Endpoint Test function Device
 -----------------------------------
 
-pcitest.sh added in tools/testing/selftests/pci_endpoint can be used to run all
-the default PCI endpoint tests. To compile this tool the following commands
-should be used::
+Kselftest added in tools/testing/selftests/pci_endpoint can be used to run all
+the default PCI endpoint tests. To build the Kselftest for PCI endpoint
+subsystem, the following commands should be used::
 
 	# cd <kernel-dir>
 	# make -C tools/testing/selftests/pci_endpoint
@@ -133,104 +133,55 @@ should be used::
 or if you desire to compile and install in your system::
 
 	# cd <kernel-dir>
-	# make -C tools/testing/selftests/pci_endpoint install
+	# make -C tools/testing/selftests/pci_endpoint INSTALL_PATH=/usr/bin install
 
-The tool and script will be located in <rootfs>/usr/bin/
+The test will be located in <rootfs>/usr/bin/
 
-
-pcitest.sh Output
-~~~~~~~~~~~~~~~~~
+Kselftest Output
+~~~~~~~~~~~~~~~~
 ::
 
-	# pcitest.sh
-	BAR tests
-
-	BAR0:           OKAY
-	BAR1:           OKAY
-	BAR2:           OKAY
-	BAR3:           OKAY
-	BAR4:           NOT OKAY
-	BAR5:           NOT OKAY
-
-	Interrupt tests
-
-	SET IRQ TYPE TO LEGACY:         OKAY
-	LEGACY IRQ:     NOT OKAY
-	SET IRQ TYPE TO MSI:            OKAY
-	MSI1:           OKAY
-	MSI2:           OKAY
-	MSI3:           OKAY
-	MSI4:           OKAY
-	MSI5:           OKAY
-	MSI6:           OKAY
-	MSI7:           OKAY
-	MSI8:           OKAY
-	MSI9:           OKAY
-	MSI10:          OKAY
-	MSI11:          OKAY
-	MSI12:          OKAY
-	MSI13:          OKAY
-	MSI14:          OKAY
-	MSI15:          OKAY
-	MSI16:          OKAY
-	MSI17:          NOT OKAY
-	MSI18:          NOT OKAY
-	MSI19:          NOT OKAY
-	MSI20:          NOT OKAY
-	MSI21:          NOT OKAY
-	MSI22:          NOT OKAY
-	MSI23:          NOT OKAY
-	MSI24:          NOT OKAY
-	MSI25:          NOT OKAY
-	MSI26:          NOT OKAY
-	MSI27:          NOT OKAY
-	MSI28:          NOT OKAY
-	MSI29:          NOT OKAY
-	MSI30:          NOT OKAY
-	MSI31:          NOT OKAY
-	MSI32:          NOT OKAY
-	SET IRQ TYPE TO MSI-X:          OKAY
-	MSI-X1:         OKAY
-	MSI-X2:         OKAY
-	MSI-X3:         OKAY
-	MSI-X4:         OKAY
-	MSI-X5:         OKAY
-	MSI-X6:         OKAY
-	MSI-X7:         OKAY
-	MSI-X8:         OKAY
-	MSI-X9:         NOT OKAY
-	MSI-X10:        NOT OKAY
-	MSI-X11:        NOT OKAY
-	MSI-X12:        NOT OKAY
-	MSI-X13:        NOT OKAY
-	MSI-X14:        NOT OKAY
-	MSI-X15:        NOT OKAY
-	MSI-X16:        NOT OKAY
-	[...]
-	MSI-X2047:      NOT OKAY
-	MSI-X2048:      NOT OKAY
-
-	Read Tests
-
-	SET IRQ TYPE TO MSI:            OKAY
-	READ (      1 bytes):           OKAY
-	READ (   1024 bytes):           OKAY
-	READ (   1025 bytes):           OKAY
-	READ (1024000 bytes):           OKAY
-	READ (1024001 bytes):           OKAY
-
-	Write Tests
-
-	WRITE (      1 bytes):          OKAY
-	WRITE (   1024 bytes):          OKAY
-	WRITE (   1025 bytes):          OKAY
-	WRITE (1024000 bytes):          OKAY
-	WRITE (1024001 bytes):          OKAY
-
-	Copy Tests
-
-	COPY (      1 bytes):           OKAY
-	COPY (   1024 bytes):           OKAY
-	COPY (   1025 bytes):           OKAY
-	COPY (1024000 bytes):           OKAY
-	COPY (1024001 bytes):           OKAY
+	# pci_endpoint_test
+	TAP version 13
+	1..10
+	# Starting 10 tests from 3 test cases.
+	#  RUN           pci_ep_basic.BAR_TEST ...
+	#            OK  pci_ep_basic.BAR_TEST
+	ok 1 pci_ep_basic.BAR_TEST
+	#  RUN           pci_ep_basic.LEGACY_IRQ_TEST ...
+	#            OK  pci_ep_basic.LEGACY_IRQ_TEST
+	ok 2 pci_ep_basic.LEGACY_IRQ_TEST
+	#  RUN           pci_ep_basic.MSI_TEST ...
+	#            OK  pci_ep_basic.MSI_TEST
+	ok 3 pci_ep_basic.MSI_TEST
+	#  RUN           pci_ep_basic.MSIX_TEST ...
+	#            OK  pci_ep_basic.MSIX_TEST
+	ok 4 pci_ep_basic.MSIX_TEST
+	#  RUN           pci_ep_data_transfer.memcpy.READ_TEST ...
+	#            OK  pci_ep_data_transfer.memcpy.READ_TEST
+	ok 5 pci_ep_data_transfer.memcpy.READ_TEST
+	#  RUN           pci_ep_data_transfer.memcpy.WRITE_TEST ...
+	#            OK  pci_ep_data_transfer.memcpy.WRITE_TEST
+	ok 6 pci_ep_data_transfer.memcpy.WRITE_TEST
+	#  RUN           pci_ep_data_transfer.memcpy.COPY_TEST ...
+	#            OK  pci_ep_data_transfer.memcpy.COPY_TEST
+	ok 7 pci_ep_data_transfer.memcpy.COPY_TEST
+	#  RUN           pci_ep_data_transfer.dma.READ_TEST ...
+	#            OK  pci_ep_data_transfer.dma.READ_TEST
+	ok 8 pci_ep_data_transfer.dma.READ_TEST
+	#  RUN           pci_ep_data_transfer.dma.WRITE_TEST ...
+	#            OK  pci_ep_data_transfer.dma.WRITE_TEST
+	ok 9 pci_ep_data_transfer.dma.WRITE_TEST
+	#  RUN           pci_ep_data_transfer.dma.COPY_TEST ...
+	#            OK  pci_ep_data_transfer.dma.COPY_TEST
+	ok 10 pci_ep_data_transfer.dma.COPY_TEST
+	# PASSED: 10 / 10 tests passed.
+	# Totals: pass:10 fail:0 xfail:0 xpass:0 skip:0 error:0
+
+
+Testcase 10 (pci_ep_data_transfer.dma.COPY_TEST) will fail for most of the DMA
+capable endpoint controllers due to the absence of the MEMCPY over DMA. For such
+controllers, it is advisable to skip the forementioned testcase using below
+command::
+
+	# pci_endpoint_test -f pci_ep_basic -v memcpy -T COPY_TEST -v dma
diff --git a/tools/testing/selftests/Makefile b/tools/testing/selftests/Makefile
index 363d031a16f7..d1c7089e7423 100644
--- a/tools/testing/selftests/Makefile
+++ b/tools/testing/selftests/Makefile
@@ -72,6 +72,7 @@ TARGETS += net/packetdrill
 TARGETS += net/rds
 TARGETS += net/tcp_ao
 TARGETS += nsfs
+TARGETS += pci_endpoint
 TARGETS += perf_events
 TARGETS += pidfd
 TARGETS += pid_namespace
diff --git a/tools/testing/selftests/pci_endpoint/.gitignore b/tools/testing/selftests/pci_endpoint/.gitignore
index 29ab47c48484..6a4837a3e034 100644
--- a/tools/testing/selftests/pci_endpoint/.gitignore
+++ b/tools/testing/selftests/pci_endpoint/.gitignore
@@ -1,3 +1,2 @@
 # SPDX-License-Identifier: GPL-2.0-only
-*.o
-pcitest
+pci_endpoint_test
diff --git a/tools/testing/selftests/pci_endpoint/Build b/tools/testing/selftests/pci_endpoint/Build
deleted file mode 100644
index c375aea21790..000000000000
--- a/tools/testing/selftests/pci_endpoint/Build
+++ /dev/null
@@ -1 +0,0 @@
-pcitest-y += pcitest.o
diff --git a/tools/testing/selftests/pci_endpoint/Makefile b/tools/testing/selftests/pci_endpoint/Makefile
index 3c6fe18e32cc..bf21ebf20b4a 100644
--- a/tools/testing/selftests/pci_endpoint/Makefile
+++ b/tools/testing/selftests/pci_endpoint/Makefile
@@ -1,58 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0
-include ../../../scripts/Makefile.include
+CFLAGS += -O2 -Wl,-no-as-needed -Wall $(KHDR_INCLUDES)
+LDFLAGS += -lrt -lpthread -lm
 
-bindir ?= /usr/bin
+TEST_GEN_PROGS = pci_endpoint_test
 
-ifeq ($(srctree),)
-srctree := $(patsubst %/tools/testing/selftests/,%,$(dir $(CURDIR)))
-endif
-
-# Do not use make's built-in rules
-# (this improves performance and avoids hard-to-debug behaviour);
-MAKEFLAGS += -r
-
-CFLAGS += -O2 -Wall -g -D_GNU_SOURCE -I$(OUTPUT)include
-
-ALL_TARGETS := pcitest
-ALL_PROGRAMS := $(patsubst %,$(OUTPUT)%,$(ALL_TARGETS))
-
-SCRIPTS := pcitest.sh
-
-all: $(ALL_PROGRAMS)
-
-export srctree OUTPUT CC LD CFLAGS
-include $(srctree)/tools/build/Makefile.include
-
-#
-# We need the following to be outside of kernel tree
-#
-$(OUTPUT)include/linux/: ../../../../include/uapi/linux/
-	mkdir -p $(OUTPUT)include/linux/ 2>&1 || true
-	ln -sf $(CURDIR)/../../../../include/uapi/linux/pcitest.h $@
-
-$(info ${CURDIR})
-prepare: $(OUTPUT)include/linux/
-
-PCITEST_IN := $(OUTPUT)pcitest-in.o
-$(PCITEST_IN): prepare FORCE
-	$(Q)$(MAKE) $(build)=pcitest
-$(OUTPUT)pcitest: $(PCITEST_IN)
-	$(QUIET_LINK)$(CC) $(CFLAGS) $(LDFLAGS) $< -o $@
-
-clean:
-	rm -f $(ALL_PROGRAMS)
-	rm -rf $(OUTPUT)include/
-	find $(or $(OUTPUT),.) -name '*.o' -delete -o -name '\.*.cmd' -delete -o -name '\.*.d' -delete
-
-install: $(ALL_PROGRAMS)
-	install -d -m 755 $(DESTDIR)$(bindir);		\
-	for program in $(ALL_PROGRAMS); do		\
-		install $$program $(DESTDIR)$(bindir);	\
-	done;						\
-	for script in $(SCRIPTS); do			\
-		install $$script $(DESTDIR)$(bindir);	\
-	done
-
-FORCE:
-
-.PHONY: all install clean FORCE prepare
+include ../lib.mk
diff --git a/tools/testing/selftests/pci_endpoint/config b/tools/testing/selftests/pci_endpoint/config
new file mode 100644
index 000000000000..7cdcf117db8d
--- /dev/null
+++ b/tools/testing/selftests/pci_endpoint/config
@@ -0,0 +1,4 @@
+CONFIG_PCI_ENDPOINT=y
+CONFIG_PCI_ENDPOINT_CONFIGFS=y
+CONFIG_PCI_EPF_TEST=m
+CONFIG_PCI_ENDPOINT_TEST=m
diff --git a/tools/testing/selftests/pci_endpoint/pci_endpoint_test.c b/tools/testing/selftests/pci_endpoint/pci_endpoint_test.c
new file mode 100644
index 000000000000..de6d70ba3079
--- /dev/null
+++ b/tools/testing/selftests/pci_endpoint/pci_endpoint_test.c
@@ -0,0 +1,186 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Kselftest for PCI Endpoint Subsystem
+ *
+ * Copyright (c) 2022 Samsung Electronics Co., Ltd.
+ *             https://www.samsung.com
+ * Author: Aman Gupta <aman1.gupta@samsung.com>
+ *
+ * Copyright (c) 2024, Linaro Ltd.
+ * Author: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+ */
+
+#include <errno.h>
+#include <fcntl.h>
+#include <stdbool.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <sys/ioctl.h>
+#include <unistd.h>
+
+#include "../../../../include/uapi/linux/pcitest.h"
+
+#include "../kselftest_harness.h"
+
+#define pci_ep_ioctl(cmd, arg)			\
+({						\
+	ret = ioctl(self->fd, cmd, arg);	\
+	ret = ret < 0 ? -errno : 0;		\
+})
+
+static const char *test_device = "/dev/pci-endpoint-test.0";
+static const unsigned long test_size[5] = { 1, 1024, 1025, 1024000, 1024001 };
+
+FIXTURE(pci_ep_basic)
+{
+	int fd;
+};
+
+FIXTURE_SETUP(pci_ep_basic)
+{
+	self->fd = open(test_device, O_RDWR);
+
+	ASSERT_NE(-1, self->fd) TH_LOG("Can't open PCI Endpoint Test device");
+}
+
+FIXTURE_TEARDOWN(pci_ep_basic)
+{
+	close(self->fd);
+}
+
+TEST_F(pci_ep_basic, BAR_TEST)
+{
+	int ret, i;
+
+	for (i = 0; i <= 5; i++) {
+		pci_ep_ioctl(PCITEST_BAR, i);
+		EXPECT_FALSE(ret) TH_LOG("Test failed for BAR%d", i);
+	}
+}
+
+TEST_F(pci_ep_basic, LEGACY_IRQ_TEST)
+{
+	int ret;
+
+	pci_ep_ioctl(PCITEST_SET_IRQTYPE, 0);
+	ASSERT_EQ(0, ret) TH_LOG("Can't set Legacy IRQ type");
+
+	pci_ep_ioctl(PCITEST_LEGACY_IRQ, 0);
+	EXPECT_FALSE(ret) TH_LOG("Test failed for Legacy IRQ");
+}
+
+TEST_F(pci_ep_basic, MSI_TEST)
+{
+	int ret, i;
+
+	pci_ep_ioctl(PCITEST_SET_IRQTYPE, 1);
+	ASSERT_EQ(0, ret) TH_LOG("Can't set MSI IRQ type");
+
+	for (i = 1; i <= 32; i++) {
+		pci_ep_ioctl(PCITEST_MSI, i);
+		EXPECT_FALSE(ret) TH_LOG("Test failed for MSI%d", i);
+	}
+}
+
+TEST_F(pci_ep_basic, MSIX_TEST)
+{
+	int ret, i;
+
+	pci_ep_ioctl(PCITEST_SET_IRQTYPE, 2);
+	ASSERT_EQ(0, ret) TH_LOG("Can't set MSI-X IRQ type");
+
+	for (i = 1; i <= 2048; i++) {
+		pci_ep_ioctl(PCITEST_MSIX, i);
+		EXPECT_FALSE(ret) TH_LOG("Test failed for MSI-X%d", i);
+	}
+}
+
+FIXTURE(pci_ep_data_transfer)
+{
+	int fd;
+};
+
+FIXTURE_SETUP(pci_ep_data_transfer)
+{
+	self->fd = open(test_device, O_RDWR);
+
+	ASSERT_NE(-1, self->fd) TH_LOG("Can't open PCI Endpoint Test device");
+}
+
+FIXTURE_TEARDOWN(pci_ep_data_transfer)
+{
+	close(self->fd);
+}
+
+FIXTURE_VARIANT(pci_ep_data_transfer)
+{
+	bool use_dma;
+};
+
+FIXTURE_VARIANT_ADD(pci_ep_data_transfer, memcpy)
+{
+	.use_dma = false,
+};
+
+FIXTURE_VARIANT_ADD(pci_ep_data_transfer, dma)
+{
+	.use_dma = true,
+};
+
+TEST_F(pci_ep_data_transfer, READ_TEST)
+{
+	struct pci_endpoint_test_xfer_param param = {0};
+	int ret, i;
+
+	if (variant->use_dma)
+		param.flags = PCITEST_FLAGS_USE_DMA;
+
+	pci_ep_ioctl(PCITEST_SET_IRQTYPE, 1);
+	ASSERT_EQ(0, ret) TH_LOG("Can't set MSI IRQ type");
+
+	for (i = 0; i < ARRAY_SIZE(test_size); i++) {
+		param.size = test_size[i];
+		pci_ep_ioctl(PCITEST_READ, &param);
+		EXPECT_FALSE(ret) TH_LOG("Test failed for size (%ld)",
+					 test_size[i]);
+	}
+}
+
+TEST_F(pci_ep_data_transfer, WRITE_TEST)
+{
+	struct pci_endpoint_test_xfer_param param = {0};
+	int ret, i;
+
+	if (variant->use_dma)
+		param.flags = PCITEST_FLAGS_USE_DMA;
+
+	pci_ep_ioctl(PCITEST_SET_IRQTYPE, 1);
+	ASSERT_EQ(0, ret) TH_LOG("Can't set MSI IRQ type");
+
+	for (i = 0; i < ARRAY_SIZE(test_size); i++) {
+		param.size = test_size[i];
+		pci_ep_ioctl(PCITEST_WRITE, &param);
+		EXPECT_FALSE(ret) TH_LOG("Test failed for size (%ld)",
+					 test_size[i]);
+	}
+}
+
+TEST_F(pci_ep_data_transfer, COPY_TEST)
+{
+	struct pci_endpoint_test_xfer_param param = {0};
+	int ret, i;
+
+	if (variant->use_dma)
+		param.flags = PCITEST_FLAGS_USE_DMA;
+
+	pci_ep_ioctl(PCITEST_SET_IRQTYPE, 1);
+	ASSERT_EQ(0, ret) TH_LOG("Can't set MSI IRQ type");
+
+	for (i = 0; i < ARRAY_SIZE(test_size); i++) {
+		param.size = test_size[i];
+		pci_ep_ioctl(PCITEST_COPY, &param);
+		EXPECT_FALSE(ret) TH_LOG("Test failed for size (%ld)",
+					 test_size[i]);
+	}
+}
+TEST_HARNESS_MAIN
diff --git a/tools/testing/selftests/pci_endpoint/pcitest.c b/tools/testing/selftests/pci_endpoint/pcitest.c
deleted file mode 100644
index 545e04ad63a2..000000000000
--- a/tools/testing/selftests/pci_endpoint/pcitest.c
+++ /dev/null
@@ -1,251 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/**
- * Userspace PCI Endpoint Test Module
- *
- * Copyright (C) 2017 Texas Instruments
- * Author: Kishon Vijay Abraham I <kishon@ti.com>
- */
-
-#include <errno.h>
-#include <fcntl.h>
-#include <stdbool.h>
-#include <stdio.h>
-#include <stdlib.h>
-#include <sys/ioctl.h>
-#include <unistd.h>
-
-#include <linux/pcitest.h>
-
-static char *irq[] = { "LEGACY", "MSI", "MSI-X" };
-
-struct pci_test {
-	char		*device;
-	char		barnum;
-	bool		legacyirq;
-	unsigned int	msinum;
-	unsigned int	msixnum;
-	int		irqtype;
-	bool		set_irqtype;
-	bool		get_irqtype;
-	bool		clear_irq;
-	bool		read;
-	bool		write;
-	bool		copy;
-	unsigned long	size;
-	bool		use_dma;
-};
-
-static int run_test(struct pci_test *test)
-{
-	struct pci_endpoint_test_xfer_param param = {};
-	int ret = -EINVAL;
-	int fd;
-
-	fd = open(test->device, O_RDWR);
-	if (fd < 0) {
-		perror("can't open PCI Endpoint Test device");
-		return -ENODEV;
-	}
-
-	if (test->barnum >= 0 && test->barnum <= 5) {
-		ret = ioctl(fd, PCITEST_BAR, test->barnum);
-		fprintf(stdout, "BAR%d:\t\t", test->barnum);
-		if (ret < 0)
-			fprintf(stdout, "NOT OKAY\n");
-		else
-			fprintf(stdout, "OKAY\n");
-	}
-
-	if (test->set_irqtype) {
-		ret = ioctl(fd, PCITEST_SET_IRQTYPE, test->irqtype);
-		fprintf(stdout, "SET IRQ TYPE TO %s:\t\t", irq[test->irqtype]);
-		if (ret < 0)
-			fprintf(stdout, "NOT OKAY\n");
-		else
-			fprintf(stdout, "OKAY\n");
-	}
-
-	if (test->get_irqtype) {
-		ret = ioctl(fd, PCITEST_GET_IRQTYPE);
-		fprintf(stdout, "GET IRQ TYPE:\t\t");
-		if (ret < 0) {
-			fprintf(stdout, "NOT OKAY\n");
-		} else {
-			fprintf(stdout, "%s\n", irq[ret]);
-			ret = 0;
-		}
-	}
-
-	if (test->clear_irq) {
-		ret = ioctl(fd, PCITEST_CLEAR_IRQ);
-		fprintf(stdout, "CLEAR IRQ:\t\t");
-		if (ret < 0)
-			fprintf(stdout, "NOT OKAY\n");
-		else
-			fprintf(stdout, "OKAY\n");
-	}
-
-	if (test->legacyirq) {
-		ret = ioctl(fd, PCITEST_LEGACY_IRQ, 0);
-		fprintf(stdout, "LEGACY IRQ:\t");
-		if (ret < 0)
-			fprintf(stdout, "NOT OKAY\n");
-		else
-			fprintf(stdout, "OKAY\n");
-	}
-
-	if (test->msinum > 0 && test->msinum <= 32) {
-		ret = ioctl(fd, PCITEST_MSI, test->msinum);
-		fprintf(stdout, "MSI%d:\t\t", test->msinum);
-		if (ret < 0)
-			fprintf(stdout, "NOT OKAY\n");
-		else
-			fprintf(stdout, "OKAY\n");
-	}
-
-	if (test->msixnum > 0 && test->msixnum <= 2048) {
-		ret = ioctl(fd, PCITEST_MSIX, test->msixnum);
-		fprintf(stdout, "MSI-X%d:\t\t", test->msixnum);
-		if (ret < 0)
-			fprintf(stdout, "NOT OKAY\n");
-		else
-			fprintf(stdout, "OKAY\n");
-	}
-
-	if (test->write) {
-		param.size = test->size;
-		if (test->use_dma)
-			param.flags = PCITEST_FLAGS_USE_DMA;
-		ret = ioctl(fd, PCITEST_WRITE, &param);
-		fprintf(stdout, "WRITE (%7ld bytes):\t\t", test->size);
-		if (ret < 0)
-			fprintf(stdout, "NOT OKAY\n");
-		else
-			fprintf(stdout, "OKAY\n");
-	}
-
-	if (test->read) {
-		param.size = test->size;
-		if (test->use_dma)
-			param.flags = PCITEST_FLAGS_USE_DMA;
-		ret = ioctl(fd, PCITEST_READ, &param);
-		fprintf(stdout, "READ (%7ld bytes):\t\t", test->size);
-		if (ret < 0)
-			fprintf(stdout, "NOT OKAY\n");
-		else
-			fprintf(stdout, "OKAY\n");
-	}
-
-	if (test->copy) {
-		param.size = test->size;
-		if (test->use_dma)
-			param.flags = PCITEST_FLAGS_USE_DMA;
-		ret = ioctl(fd, PCITEST_COPY, &param);
-		fprintf(stdout, "COPY (%7ld bytes):\t\t", test->size);
-		if (ret < 0)
-			fprintf(stdout, "NOT OKAY\n");
-		else
-			fprintf(stdout, "OKAY\n");
-	}
-
-	fflush(stdout);
-	close(fd);
-	return ret;
-}
-
-int main(int argc, char **argv)
-{
-	int c;
-	struct pci_test *test;
-
-	test = calloc(1, sizeof(*test));
-	if (!test) {
-		perror("Fail to allocate memory for pci_test\n");
-		return -ENOMEM;
-	}
-
-	/* since '0' is a valid BAR number, initialize it to -1 */
-	test->barnum = -1;
-
-	/* set default size as 100KB */
-	test->size = 0x19000;
-
-	/* set default endpoint device */
-	test->device = "/dev/pci-endpoint-test.0";
-
-	while ((c = getopt(argc, argv, "D:b:m:x:i:deIlhrwcs:")) != EOF)
-	switch (c) {
-	case 'D':
-		test->device = optarg;
-		continue;
-	case 'b':
-		test->barnum = atoi(optarg);
-		if (test->barnum < 0 || test->barnum > 5)
-			goto usage;
-		continue;
-	case 'l':
-		test->legacyirq = true;
-		continue;
-	case 'm':
-		test->msinum = atoi(optarg);
-		if (test->msinum < 1 || test->msinum > 32)
-			goto usage;
-		continue;
-	case 'x':
-		test->msixnum = atoi(optarg);
-		if (test->msixnum < 1 || test->msixnum > 2048)
-			goto usage;
-		continue;
-	case 'i':
-		test->irqtype = atoi(optarg);
-		if (test->irqtype < 0 || test->irqtype > 2)
-			goto usage;
-		test->set_irqtype = true;
-		continue;
-	case 'I':
-		test->get_irqtype = true;
-		continue;
-	case 'r':
-		test->read = true;
-		continue;
-	case 'w':
-		test->write = true;
-		continue;
-	case 'c':
-		test->copy = true;
-		continue;
-	case 'e':
-		test->clear_irq = true;
-		continue;
-	case 's':
-		test->size = strtoul(optarg, NULL, 0);
-		continue;
-	case 'd':
-		test->use_dma = true;
-		continue;
-	case 'h':
-	default:
-usage:
-		fprintf(stderr,
-			"usage: %s [options]\n"
-			"Options:\n"
-			"\t-D <dev>		PCI endpoint test device {default: /dev/pci-endpoint-test.0}\n"
-			"\t-b <bar num>		BAR test (bar number between 0..5)\n"
-			"\t-m <msi num>		MSI test (msi number between 1..32)\n"
-			"\t-x <msix num>	\tMSI-X test (msix number between 1..2048)\n"
-			"\t-i <irq type>	\tSet IRQ type (0 - Legacy, 1 - MSI, 2 - MSI-X)\n"
-			"\t-e			Clear IRQ\n"
-			"\t-I			Get current IRQ type configured\n"
-			"\t-d			Use DMA\n"
-			"\t-l			Legacy IRQ test\n"
-			"\t-r			Read buffer test\n"
-			"\t-w			Write buffer test\n"
-			"\t-c			Copy buffer test\n"
-			"\t-s <size>		Size of buffer {default: 100KB}\n"
-			"\t-h			Print this help message\n",
-			argv[0]);
-		return -EINVAL;
-	}
-
-	return run_test(test);
-}
diff --git a/tools/testing/selftests/pci_endpoint/pcitest.sh b/tools/testing/selftests/pci_endpoint/pcitest.sh
deleted file mode 100644
index 75ed48ff2990..000000000000
--- a/tools/testing/selftests/pci_endpoint/pcitest.sh
+++ /dev/null
@@ -1,72 +0,0 @@
-#!/bin/sh
-# SPDX-License-Identifier: GPL-2.0
-
-echo "BAR tests"
-echo
-
-bar=0
-
-while [ $bar -lt 6 ]
-do
-	pcitest -b $bar
-	bar=`expr $bar + 1`
-done
-echo
-
-echo "Interrupt tests"
-echo
-
-pcitest -i 0
-pcitest -l
-
-pcitest -i 1
-msi=1
-
-while [ $msi -lt 33 ]
-do
-        pcitest -m $msi
-        msi=`expr $msi + 1`
-done
-echo
-
-pcitest -i 2
-msix=1
-
-while [ $msix -lt 2049 ]
-do
-        pcitest -x $msix
-        msix=`expr $msix + 1`
-done
-echo
-
-echo "Read Tests"
-echo
-
-pcitest -i 1
-
-pcitest -r -s 1
-pcitest -r -s 1024
-pcitest -r -s 1025
-pcitest -r -s 1024000
-pcitest -r -s 1024001
-echo
-
-echo "Write Tests"
-echo
-
-pcitest -w -s 1
-pcitest -w -s 1024
-pcitest -w -s 1025
-pcitest -w -s 1024000
-pcitest -w -s 1024001
-echo
-
-echo "Copy Tests"
-echo
-
-pcitest -c -s 1
-pcitest -c -s 1024
-pcitest -c -s 1025
-pcitest -c -s 1024000
-pcitest -c -s 1024001
-echo
-- 
2.25.1

Re: [PATCH v3 2/4] misc: pci_endpoint_test: Fix the return value of IOCTL

[Damien Le Moal]

On 12/11/24 5:01 PM, Manivannan Sadhasivam wrote:
>  struct pci_test {
> @@ -52,63 +51,65 @@ static int run_test(struct pci_test *test)
>  		ret = ioctl(fd, PCITEST_BAR, test->barnum);
>  		fprintf(stdout, "BAR%d:\t\t", test->barnum);
>  		if (ret < 0)
> -			fprintf(stdout, "TEST FAILED\n");
> +			fprintf(stdout, "NOT OKAY\n");
>  		else
> -			fprintf(stdout, "%s\n", result[ret]);
> +			fprintf(stdout, "OKAY\n");

Why not simplify as I suggested to avoid all these repetitive (and ugly) "if ()
else" ?


-- 
Damien Le Moal
Western Digital Research

Re: [PATCH v3 2/4] misc: pci_endpoint_test: Fix the return value of IOCTL

[Manivannan Sadhasivam]

On Wed, Dec 11, 2024 at 05:37:27PM +0900, Damien Le Moal wrote:
> On 12/11/24 5:01 PM, Manivannan Sadhasivam wrote:
> >  struct pci_test {
> > @@ -52,63 +51,65 @@ static int run_test(struct pci_test *test)
> >  		ret = ioctl(fd, PCITEST_BAR, test->barnum);
> >  		fprintf(stdout, "BAR%d:\t\t", test->barnum);
> >  		if (ret < 0)
> > -			fprintf(stdout, "TEST FAILED\n");
> > +			fprintf(stdout, "NOT OKAY\n");
> >  		else
> > -			fprintf(stdout, "%s\n", result[ret]);
> > +			fprintf(stdout, "OKAY\n");
> 
> Why not simplify as I suggested to avoid all these repetitive (and ugly) "if ()
> else" ?
> 

I've replied to your suggestion in v2:
https://lore.kernel.org/linux-pci/20241211074757.byc5jqpgfe3otjh7@thinkpad/

Since the test is migrated to Kselftest right after this patch, I see no
incentive to simplify the code.

- Mani

-- 
மணிவண்ணன் சதாசிவம்

Re: [PATCH v3 0/4] Migrate PCI Endpoint Subsystem tests to Kselftest

[Niklas Cassel]

Hello Mani,

On Wed, Dec 11, 2024 at 01:31:01PM +0530, Manivannan Sadhasivam wrote:
> Hi,
> 
> This series carries forward the effort to add Kselftest for PCI Endpoint
> Subsystem started by Aman Gupta [1] a while ago. I reworked the initial version
> based on another patch that fixes the return values of IOCTLs in
> pci_endpoint_test driver and did many cleanups. Since the resulting work
> modified the initial version substantially, I took over the authorship.
> 
> This series also incorporates the review comment by Shuah Khan [2] to move the
> existing tests from 'tools/pci' to 'tools/testing/kselftest/pci_endpoint' before
> migrating to Kselftest framework. I made sure that the tests are executable in
> each commit and updated documentation accordingly.
> 
> NOTE: Patch 1 is strictly not related to this series, but necessary to execute
> Kselftests with Qualcomm Endpoint devices. So this can be merged separately.

Having to write a big NOTE is usually a hint that you should just have done
things differently :)

If you need to respin this series, I strongly suggest that you send the
Qcom fix separately. It is totally independent, and should be merged ASAP.

As you know, this series conflicts with:
https://lore.kernel.org/linux-pci/20241116032045.2574168-2-cassel@kernel.org/

I don't see any reason why the above patch has not been merged yet,
but it would be really nice if the above could be picked up first,
so this series could also add a kselftest testcase for the above.


Kind regards,
Niklas

Re: [PATCH v3 0/4] Migrate PCI Endpoint Subsystem tests to Kselftest

[Manivannan Sadhasivam]

On Thu, Dec 12, 2024 at 10:25:53AM +0100, Niklas Cassel wrote:
> Hello Mani,
> 
> On Wed, Dec 11, 2024 at 01:31:01PM +0530, Manivannan Sadhasivam wrote:
> > Hi,
> > 
> > This series carries forward the effort to add Kselftest for PCI Endpoint
> > Subsystem started by Aman Gupta [1] a while ago. I reworked the initial version
> > based on another patch that fixes the return values of IOCTLs in
> > pci_endpoint_test driver and did many cleanups. Since the resulting work
> > modified the initial version substantially, I took over the authorship.
> > 
> > This series also incorporates the review comment by Shuah Khan [2] to move the
> > existing tests from 'tools/pci' to 'tools/testing/kselftest/pci_endpoint' before
> > migrating to Kselftest framework. I made sure that the tests are executable in
> > each commit and updated documentation accordingly.
> > 
> > NOTE: Patch 1 is strictly not related to this series, but necessary to execute
> > Kselftests with Qualcomm Endpoint devices. So this can be merged separately.
> 
> Having to write a big NOTE is usually a hint that you should just have done
> things differently :)
> 
> If you need to respin this series, I strongly suggest that you send the
> Qcom fix separately. It is totally independent, and should be merged ASAP.
> 

Even though it is an independent fix, it is needed to get Kselftests (also the
legacy ones) passing without failures. That's why I kept it as patch 1.
Otherwise, someone may test it and report failures.

> As you know, this series conflicts with:
> https://lore.kernel.org/linux-pci/20241116032045.2574168-2-cassel@kernel.org/
> 
> I don't see any reason why the above patch has not been merged yet,
> but it would be really nice if the above could be picked up first,
> so this series could also add a kselftest testcase for the above.
> 

I was hoping that Greg would pick misc driver changes, but looking at the git
log of this driver I got to know that the changes were picked by PCI folks only.

@kw: Could you please pick the patch from Niklas?

- Mani

-- 
மணிவண்ணன் சதாசிவம்

Re: [PATCH v3 0/4] Migrate PCI Endpoint Subsystem tests to Kselftest

[Niklas Cassel]

On Mon, Dec 16, 2024 at 11:33:37AM +0530, Manivannan Sadhasivam wrote:
> On Thu, Dec 12, 2024 at 10:25:53AM +0100, Niklas Cassel wrote:
> > 
> > If you need to respin this series, I strongly suggest that you send the
> > Qcom fix separately. It is totally independent, and should be merged ASAP.
> > 
> 
> Even though it is an independent fix, it is needed to get Kselftests (also the
> legacy ones) passing without failures. That's why I kept it as patch 1.
> Otherwise, someone may test it and report failures.

If qcom needs this fix, then surely pcitest.sh is already failing for the
BAR test for BAR 1 and BAR 3, for all qcom SoCs, and must have been doing
so since the introduction of the introduction of the qcom-pcie-ep driver.

That should be fixed of course, but I do not see why converting the tests
to kselftests is related in any way.

It seems cleaner if this series just converts the tests cases to
kselftests, and nothing else. EPC drivers that was passing before should
still pass after this conversion.

I understand that the qcom fix is important though, which is even bigger
reason that it should be sent separately, so that it can go in ASAP, and
not be blocked on this series landing. Because, AFAICT, you need that qcom
fix to make the pcitest.sh test cases (even without converting to
kselftests).


Kind regards,
Niklas

Re: [PATCH v3 0/4] Migrate PCI Endpoint Subsystem tests to Kselftest

[Krzysztof Wilczyński]

Hello,

> This series carries forward the effort to add Kselftest for PCI Endpoint
> Subsystem started by Aman Gupta [1] a while ago. I reworked the initial version
> based on another patch that fixes the return values of IOCTLs in
> pci_endpoint_test driver and did many cleanups. Since the resulting work
> modified the initial version substantially, I took over the authorship.
> 
> This series also incorporates the review comment by Shuah Khan [2] to move the
> existing tests from 'tools/pci' to 'tools/testing/kselftest/pci_endpoint' before
> migrating to Kselftest framework. I made sure that the tests are executable in
> each commit and updated documentation accordingly.
> 
> NOTE: Patch 1 is strictly not related to this series, but necessary to execute
> Kselftests with Qualcomm Endpoint devices. So this can be merged separately.

Applied to selftests, thank you!

[01/04] PCI: qcom-ep: Mark BAR0/BAR2 as 64bit BARs and BAR1/BAR3 as RESERVED
        https://git.kernel.org/pci/pci/c/71ae1c3a342c

[02/04] misc: pci_endpoint_test: Fix the return value of IOCTL
        https://git.kernel.org/pci/pci/c/7908208a2f6a

[03/04] selftests: Move PCI Endpoint tests from tools/pci to Kselftests
        https://git.kernel.org/pci/pci/c/5c892b60e4c6

[04/04] selftests: pci_endpoint: Migrate to Kselftest framework
        https://git.kernel.org/pci/pci/c/62f966e676b5

	Krzysztof

Re: [PATCH v3 0/4] Migrate PCI Endpoint Subsystem tests to Kselftest

[Niklas Cassel]

On Thu, Dec 19, 2024 at 09:01:12AM +0900, Krzysztof Wilczyński wrote:
> Hello,
> 
> > This series carries forward the effort to add Kselftest for PCI Endpoint
> > Subsystem started by Aman Gupta [1] a while ago. I reworked the initial version
> > based on another patch that fixes the return values of IOCTLs in
> > pci_endpoint_test driver and did many cleanups. Since the resulting work
> > modified the initial version substantially, I took over the authorship.
> > 
> > This series also incorporates the review comment by Shuah Khan [2] to move the
> > existing tests from 'tools/pci' to 'tools/testing/kselftest/pci_endpoint' before
> > migrating to Kselftest framework. I made sure that the tests are executable in
> > each commit and updated documentation accordingly.
> > 
> > NOTE: Patch 1 is strictly not related to this series, but necessary to execute
> > Kselftests with Qualcomm Endpoint devices. So this can be merged separately.
> 
> Applied to selftests, thank you!
> 
> [01/04] PCI: qcom-ep: Mark BAR0/BAR2 as 64bit BARs and BAR1/BAR3 as RESERVED
>         https://git.kernel.org/pci/pci/c/71ae1c3a342c
> 
> [02/04] misc: pci_endpoint_test: Fix the return value of IOCTL
>         https://git.kernel.org/pci/pci/c/7908208a2f6a
> 
> [03/04] selftests: Move PCI Endpoint tests from tools/pci to Kselftests
>         https://git.kernel.org/pci/pci/c/5c892b60e4c6
> 
> [04/04] selftests: pci_endpoint: Migrate to Kselftest framework
>         https://git.kernel.org/pci/pci/c/62f966e676b5
> 
> 	Krzysztof

I'm a bit surprised that this series was picked up,
since as you could see earlier in this same thread:
https://lore.kernel.org/linux-pci/20241219000112.GE1444967@rocinante/T/#m7bb0e624a4bf88f5cc13dc3804972c4fa9a79bcd

Mani suggested that my patch (which conflicts with this),
should be picked up first.

Is there a reason for the sudden chance of plans?

Please advice on how to proceed.


Kind regards,
Niklas

Re: [PATCH v3 0/4] Migrate PCI Endpoint Subsystem tests to Kselftest

[Krzysztof Wilczyński]

Hello,

[...]
> > Applied to selftests, thank you!
> > 
> > [01/04] PCI: qcom-ep: Mark BAR0/BAR2 as 64bit BARs and BAR1/BAR3 as RESERVED
> >         https://git.kernel.org/pci/pci/c/71ae1c3a342c
> > 
> > [02/04] misc: pci_endpoint_test: Fix the return value of IOCTL
> >         https://git.kernel.org/pci/pci/c/7908208a2f6a
> > 
> > [03/04] selftests: Move PCI Endpoint tests from tools/pci to Kselftests
> >         https://git.kernel.org/pci/pci/c/5c892b60e4c6
> > 
> > [04/04] selftests: pci_endpoint: Migrate to Kselftest framework
> >         https://git.kernel.org/pci/pci/c/62f966e676b5
> > 
> > 	Krzysztof
> 
> I'm a bit surprised that this series was picked up,
> since as you could see earlier in this same thread:
> https://lore.kernel.org/linux-pci/20241219000112.GE1444967@rocinante/T/#m7bb0e624a4bf88f5cc13dc3804972c4fa9a79bcd
> 
> Mani suggested that my patch (which conflicts with this),
> should be picked up first.
> 
> Is there a reason for the sudden chance of plans?

No, no change to the plan here.

There were some mixed signals between the mailing list, IRC and
the Patchwork queue.  But I will proceed as planned there.

> Please advice on how to proceed.

I will pick your patch and drop Mani's series.  Mani told me on IRC that he
plans to work on it a bit more.

	Krzysztof

Re: [PATCH v3 0/4] Migrate PCI Endpoint Subsystem tests to Kselftest

[Niklas Cassel]

On Fri, Dec 20, 2024 at 12:55:04AM +0900, Krzysztof Wilczyński wrote:

[...]

> > Mani suggested that my patch (which conflicts with this),
> > should be picked up first.
> > 
> > Is there a reason for the sudden chance of plans?
> 
> No, no change to the plan here.
> 
> There were some mixed signals between the mailing list, IRC and
> the Patchwork queue.  But I will proceed as planned there.
> 
> > Please advice on how to proceed.
> 
> I will pick your patch and drop Mani's series.  Mani told me on IRC that he
> plans to work on it a bit more.

Ok, thanks!

I really hope that the kselftest conversion will have time to land this
cycle as well.

Feel free to CC me on the next revision and I will make sure to send a
Tested-by and/or Reviewed-by.


Kind regards,
Niklas