Re: [PATCH v1 00/15] iio: adc: ad7768-1: Add features, improvements, and fixes

[Jonathan Santos <jonath4nns@gmail.com>]

On 01/07, David Lechner wrote:
> On 1/7/25 9:23 AM, Jonathan Santos wrote:
> > This patch series introduces some new features, improvements,
> > and fixes for the AD7768-1 ADC driver. 
> > 
> > The goal is to support all key functionalities listed in the device
> > datasheet, including filter mode selection, common mode voltage 
> > configuration and GPIO support. Additionally, this includes fixes 
> > for SPI communication and for IIO interface, and also code improvements
> > to enhance maintainability and readability.
> 
> It looks like some of the patches also have to do with a sync trigger for one
> or more chips. There was a recent discussion about this for another ADC that
> seems relevant:
> 
> [1]: https://lore.kernel.org/linux-iio/20241128125811.11913-1-alisa.roman@analog.com/
> 
Interesting. That would cover the case where we control the synchronization with a GPIO,
but it gets more complex when using /SYNC_OUT in a multidevice setup, since it requires
sending a SPI command to the "main device" to toggle the pin.

The main device being the one which its /SYNC_OUT drives the others SYNC_IN.
> > 
> > Jonathan Santos (8):
> >   dt-bindings: iio: adc: ad7768-1: add synchronization over SPI property
> >   Documentation: ABI: add wideband filter type to  sysfs-bus-iio
> >   Documentation: ABI: testing: ad7768-1: Add device specific ABI
> >     documentation.
> >   iio: adc: ad7768-1: set MOSI idle state to high
> >   iio: adc: ad7768-1: use guard(mutex) to simplify code
> >   iio: adc: ad7768-1: add multiple scan types to support 16-bits mode
> >   iio: adc: ad7768-1: add support for Synchronization over SPI
> >   iio: adc: ad7768-1: add filter type and decimation rate attributes
> > 
> > Sergiu Cuciurean (7):
> >   iio: adc: ad7768-1: Fix conversion result sign
> >   iio: adc: ad7768-1: Update reg_read function
> >   iio: adc: ad7768-1: Add reset gpio
> >   iio: adc: ad7768-1: Move buffer allocation to a separate function
> >   iio: adc: ad7768-1: Add support for variable VCM
> >   iio: adc: ad7768-1: Add reg_write_masked function
> >   iio: adc: ad7768-1: Add GPIO controller support
> > 
> >  Documentation/ABI/testing/sysfs-bus-iio       |   2 +
> >  .../ABI/testing/sysfs-bus-iio-adc-ad7768-1    |  13 +
> >  .../bindings/iio/adc/adi,ad7768-1.yaml        |  24 +-
> >  drivers/iio/adc/ad7768-1.c                    | 830 +++++++++++++++---
> >  4 files changed, 747 insertions(+), 122 deletions(-)
> >  create mode 100644 Documentation/ABI/testing/sysfs-bus-iio-adc-ad7768-1
> > 
> > 
> > base-commit: 5de07b8a24cf44cdb78adeab790704bf577c2c1d
> 
> What are all of these prerequisites?
> 
I might have done something wrong while generating the pacthes, i will check this.
> > prerequisite-patch-id: 8b531bca46f7c7ea1c0f6d232d162fd05fda52f7
> > prerequisite-patch-id: c8c8637cb3343097c3224a9aa315fc45dca15f45
> > prerequisite-patch-id: e0baac9ef84e6e8a0a272fc6191fc1cb48143e44
> > prerequisite-patch-id: 7e5cad70809fa7d37e917628147c197427c11594
> > prerequisite-patch-id: 28dcdb0ebc3ca3c02713f83c94a4eedbe81095dc
> > ...