Re: [PATCH v2 6/9] ARM: dts: qcom: msm8226: Add smsm node

[Stephan Gerhold <stephan.gerhold@linaro.org>]

On Sun, Jan 26, 2025 at 09:57:25PM +0100, Luca Weiss wrote:
> From: Matti Lehtimäki <matti.lehtimaki@gmail.com>
> 
> Add smsm node for remoteproc cores.
> 
> Signed-off-by: Matti Lehtimäki <matti.lehtimaki@gmail.com>
> Co-developed-by: Luca Weiss <luca@lucaweiss.eu>
> Signed-off-by: Luca Weiss <luca@lucaweiss.eu>

Reviewed-by: Stephan Gerhold <stephan.gerhold@linaro.org>

> ---
>  arch/arm/boot/dts/qcom/qcom-msm8226.dtsi | 34 ++++++++++++++++++++++++++++++++
>  1 file changed, 34 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/qcom/qcom-msm8226.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8226.dtsi
> index caaeeadf289f78d29403312738bbb714eaad74d2..7e0838af6c2d0dc26e0082471b70578bc627491d 100644
> --- a/arch/arm/boot/dts/qcom/qcom-msm8226.dtsi
> +++ b/arch/arm/boot/dts/qcom/qcom-msm8226.dtsi
> @@ -253,6 +253,40 @@ adsp_smp2p_in: slave-kernel {
>  		};
>  	};
>  
> +	smsm {
> +		compatible = "qcom,smsm";
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		mboxes = <0>, <&apcs 13>, <&apcs 9>, <&apcs 19>;
> +
> +		apps_smsm: apps@0 {
> +			reg = <0>;
> +			#qcom,smem-state-cells = <1>;
> +		};
> +
> +		modem_smsm: modem@1 {
> +			reg = <1>;
> +			interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
> +			interrupt-controller;
> +			#interrupt-cells = <2>;
> +		};
> +
> +		adsp_smsm: adsp@2 {
> +			reg = <2>;
> +			interrupts = <GIC_SPI 157 IRQ_TYPE_EDGE_RISING>;
> +			interrupt-controller;
> +			#interrupt-cells = <2>;
> +		};
> +
> +		wcnss_smsm: wcnss@7 {
> +			reg = <7>;
> +			interrupts = <GIC_SPI 144 IRQ_TYPE_EDGE_RISING>;
> +			interrupt-controller;
> +			#interrupt-cells = <2>;
> +		};
> +	};
> +
>  	soc: soc {
>  		compatible = "simple-bus";
>  		#address-cells = <1>;
> 
> -- 
> 2.48.1
>