Re: [PATCH v9 0/4] MIPS: Support I6500 multi-cluster configuration

[Thomas Bogendoerfer <tsbogend@alpha.franken.de>]

On Wed, Jan 29, 2025 at 01:32:46PM +0100, Aleksandar Rikalo wrote:
> Taken from Paul Burton MIPS repo with minor changes from Chao-ying Fu.
> Tested with 64r6el_defconfig on Boston board in 2 cluster/2 VPU and
> 1 cluster/4 VPU configurations.
> 
> v9:
>  - The changes related to the broken HCI have been removed as they are now part of a different series:
>    https://lore.kernel.org/linux-mips/20250123-cluster-hci-broken-v3-0-8a7ec57cbf68@bootlin.com/
>  - Re-base onto the master branch, with no functionality impact.
> 
> v8:
>  - irqchip: mips-gic: Handle case with cluster without CPU cores.
>  - Add Tested-by: Gregory CLEMENT <gregory.clement@bootlin.com> for the entire series.
>  - Re-base onto the master branch, with no functionality impact.
> 
> v7:
>  - Add fixes for specific CM3.5 which is used in EyeQ6H SoCs,
>    suggested by Gregory Clement.
>  - Re-base onto the master branch, with no functionality impact.
> 
> v6:
>  - Re-base onto the master branch, with no functionality impact.
>  - Correct the issue reported by the kernel test robot.
> 
> v5:
>  - Drop FDC related changes (patches 12, 13, and 14).
>  - Apply changes suggested by Thomas Gleixner (patches 3 and 4).
>  - Add #include <linux/cpumask.h> to patch 1, suggested by Thomas Bogendoerfer.
>  - Add Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> for the patch 08/11.
>  - Add Tested-by: Serge Semin <fancer.lancer@gmail.com> for the entire series.
>  - Correct some commit messages.
> 
> v4:
>  - Re-base onto the master branch, with no functionality impact.
>  - Refactor MIPS FDC driver in the context of multicluster support.
> 
> v3:
>  - Add Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> for the patch 02/12.
>  - Add the changes requested by Marc Zyngier for the 3/12 patch.
>  - Remove the patch 11/12 (a consequence of a discussion between Jiaxun Yang
>    and Marc Zyngier.
>  - Re-base onto the master branch, with no functionality impact.
> 
> v2:
>  - Apply correct Signed-off-by to avoid confusion.
> 
> Paul Burton (4):
>   clocksource: mips-gic-timer: Enable counter when CPUs start
>   MIPS: pm-cps: Use per-CPU variables as per-CPU, not per-core
>   MIPS: CPS: Introduce struct cluster_boot_config
>   MIPS: CPS: Boot CPUs in secondary clusters
> 
>  arch/mips/include/asm/mips-cm.h      |  18 ++
>  arch/mips/include/asm/smp-cps.h      |   7 +-
>  arch/mips/kernel/asm-offsets.c       |   3 +
>  arch/mips/kernel/cps-vec.S           |  19 +-
>  arch/mips/kernel/mips-cm.c           |   4 +-
>  arch/mips/kernel/pm-cps.c            |  35 ++--
>  arch/mips/kernel/smp-cps.c           | 285 ++++++++++++++++++++++-----
>  drivers/clocksource/mips-gic-timer.c |   6 +-
>  8 files changed, 307 insertions(+), 70 deletions(-)

series applied to mips-next.

Thomas.

-- 
Crap can work. Given enough thrust pigs will fly, but it's not necessarily a
good idea.                                                [ RFC1925, 2.3 ]