Re: [PATCH V2] rcu: Make sure new krcp free business is handled after the wanted rcu grace period.

[Uladzislau Rezki <urezki@gmail.com>]

On Fri, Mar 31, 2023 at 05:01:52PM +0200, Uladzislau Rezki wrote:
> On Fri, Mar 31, 2023 at 08:42:09PM +0800, Ziwei Dai wrote:
> > In kfree_rcu_monitor(), new free business at krcp is attached to any free
> > channel at krwp. kfree_rcu_monitor() is responsible to make sure new free
> > business is handled after the rcu grace period. But if there is any none-free
> > channel at krwp already, that means there is an on-going rcu work,
> > which will cause the kvfree_call_rcu()-triggered free business is done
> > before the wanted rcu grace period ends.
> > 
> > This commit ignore krwp which has non-free channel at kfree_rcu_monitor(),
> > to fix the issue that kvfree_call_rcu() loses effectiveness.
> > 
> > Below is the css_set obj "from_cset" use-after-free case caused by
> > kvfree_call_rcu() losing effectiveness.
> > CPU 0 calls rcu_read_lock(), then use "from_cset", then hard irq comes,
> > the task is schedule out.
> > CPU 1 calls kfree_rcu(cset, rcu_head), willing to free "from_cset" after new gp.
> > But "from_cset" is freed right after current gp end. "from_cset" is reallocated.
> > CPU 0 's task arrives back, references "from_cset"'s member, which causes crash.
> > 
> > CPU 0					CPU 1
> > count_memcg_event_mm()
> > |rcu_read_lock()  <---
> > |mem_cgroup_from_task()
> >  |// css_set_ptr is the "from_cset" mentioned on CPU 1
> >  |css_set_ptr = rcu_dereference((task)->cgroups)
> >  |// Hard irq comes, current task is scheduled out.
> > 
> > 					cgroup_attach_task()
> > 					|cgroup_migrate()
> > 					|cgroup_migrate_execute()
> > 					|css_set_move_task(task, from_cset, to_cset, true)
> > 					|cgroup_move_task(task, to_cset)
> > 					|rcu_assign_pointer(.., to_cset)
> > 					|...
> > 					|cgroup_migrate_finish()
> > 					|put_css_set_locked(from_cset)
> > 					|from_cset->refcount return 0
> > 					|kfree_rcu(cset, rcu_head) // means to free from_cset after new gp
> > 					|add_ptr_to_bulk_krc_lock()
> > 					|schedule_delayed_work(&krcp->monitor_work, ..)
> > 
> > 					kfree_rcu_monitor()
> > 					|krcp->bulk_head[0]'s work attached to krwp->bulk_head_free[]
> > 					|queue_rcu_work(system_wq, &krwp->rcu_work)
> > 					|if rwork->rcu.work is not in WORK_STRUCT_PENDING_BIT state,
> > 					|call_rcu(&rwork->rcu, rcu_work_rcufn) <--- request a new gp
> > 
> > 					// There is a perious call_rcu(.., rcu_work_rcufn)
> > 					// gp end, rcu_work_rcufn() is called.
> > 					rcu_work_rcufn()
> > 					|__queue_work(.., rwork->wq, &rwork->work);
> > 
> > 					|kfree_rcu_work()
> > 					|krwp->bulk_head_free[0] bulk is freed before new gp end!!!
> > 					|The "from_cset" is freed before new gp end.
> > 
> > // the task is scheduled in after many ms.
> >  |css_set_ptr->subsys[(subsys_id) <--- Caused kernel crash, because css_set_ptr is freed.
> > 
> > v2: Use helper function instead of inserted code block at kfree_rcu_monitor().
> > 
> > Fixes: c014efeef76a ("rcu: Add multiple in-flight batches of kfree_rcu() work")
> > Signed-off-by: Ziwei Dai <ziwei.dai@unisoc.com>
> > ---
> >  kernel/rcu/tree.c | 27 +++++++++++++++++++--------
> >  1 file changed, 19 insertions(+), 8 deletions(-)
> > 
> > diff --git a/kernel/rcu/tree.c b/kernel/rcu/tree.c
> > index 8e880c0..7b95ee9 100644
> > --- a/kernel/rcu/tree.c
> > +++ b/kernel/rcu/tree.c
> > @@ -3024,6 +3024,18 @@ static void kfree_rcu_work(struct work_struct *work)
> >  	return !!READ_ONCE(krcp->head);
> >  }
> >  
> > +static bool
> > +need_wait_for_krwp_work(struct kfree_rcu_cpu_work *krwp)
> > +{
> > +	int i;
> > +
> > +	for (i = 0; i < FREE_N_CHANNELS; i++)
> > +		if (!list_empty(&krwp->bulk_head_free[i]))
> > +			return true;
> > +
> > +	return !!krwp->head_free;
> > +}
> > +
> >  static int krc_count(struct kfree_rcu_cpu *krcp)
> >  {
> >  	int sum = atomic_read(&krcp->head_count);
> > @@ -3107,15 +3119,14 @@ static void kfree_rcu_monitor(struct work_struct *work)
> >  	for (i = 0; i < KFREE_N_BATCHES; i++) {
> >  		struct kfree_rcu_cpu_work *krwp = &(krcp->krw_arr[i]);
> >  
> > -		// Try to detach bulk_head or head and attach it over any
> > -		// available corresponding free channel. It can be that
> > -		// a previous RCU batch is in progress, it means that
> > -		// immediately to queue another one is not possible so
> > -		// in that case the monitor work is rearmed.
> > -		if ((!list_empty(&krcp->bulk_head[0]) && list_empty(&krwp->bulk_head_free[0])) ||
> > -			(!list_empty(&krcp->bulk_head[1]) && list_empty(&krwp->bulk_head_free[1])) ||
> > -				(READ_ONCE(krcp->head) && !krwp->head_free)) {
> > +		// Try to detach bulk_head or head and attach it, only when
> > +		// all channels are free.  Any channel is not free means at krwp
> > +		// there is on-going rcu work to handle krwp's free business.
> > +		if (need_wait_for_krwp_work(krwp))
> > +			continue;
> >  
> > +		// kvfree_rcu_drain_ready() might handle this krcp, if so give up.
> > +		if (need_offload_krc(krcp)) {
> >  			// Channel 1 corresponds to the SLAB-pointer bulk path.
> >  			// Channel 2 corresponds to vmalloc-pointer bulk path.
> >  			for (j = 0; j < FREE_N_CHANNELS; j++) {
> > -- 
> > 1.9.1
> > 
> It looks correct to me. I will test it over weekend.
> 
Reviewed-by: Uladzislau Rezki (Sony) <urezki@gmail.com>

--
Uladzislau Rezki