public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: William McVicker <willmcvicker@google.com>
To: Ajay Agarwal <ajayagarwal@google.com>
Cc: "Bjorn Helgaas" <helgaas@kernel.org>,
	"Lorenzo Pieralisi" <lpieralisi@kernel.org>,
	"Sajid Dalvi" <sdalvi@google.com>,
	"Han Jingoo" <jingoohan1@gmail.com>,
	"Bjorn Helgaas" <bhelgaas@google.com>,
	"Gustavo Pimentel" <gustavo.pimentel@synopsys.com>,
	"Krzysztof Wilczyński" <kw@linux.com>,
	"Rob Herring" <robh@kernel.org>,
	kernel-team@android.com, linux-pci@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	"Krzysztof Kozlowski" <krzysztof.kozlowski@linaro.org>
Subject: Re: [PATCH v2] PCI: dwc: Wait for link up only if link is started
Date: Fri, 7 Apr 2023 10:40:01 -0700	[thread overview]
Message-ID: <ZDBVcczqzte/0r4Q@google.com> (raw)
In-Reply-To: <ZC6Mov/wX4cbIiNG@google.com>

On 04/06/2023, 'Ajay Agarwal' via kernel-team wrote:
> Here is my attempt at a patch which can satisfy all the requirements
> (Ideally, I did not want to use `pci->ops` in the host driver but I
> could not figure out any other way):
> 
> diff --git a/drivers/pci/controller/dwc/pcie-designware-host.c
> b/drivers/pci/controller/dwc/pcie-designware-host.c
> index 9952057c8819..39c7219ec7c9 100644
> --- a/drivers/pci/controller/dwc/pcie-designware-host.c
> +++ b/drivers/pci/controller/dwc/pcie-designware-host.c
> @@ -485,15 +485,18 @@ int dw_pcie_host_init(struct dw_pcie_rp *pp)
>  	if (ret)
>  		goto err_remove_edma;
>  
> -	if (!dw_pcie_link_up(pci)) {
> -		ret = dw_pcie_start_link(pci);
> +	ret = dw_pcie_start_link(pci);
> +	if (ret)
> +		goto err_remove_edma;
> +
> +	if (dw_pcie_link_up(pci)) {
> +		dw_pcie_print_link_status(pci);
> +	} else if (pci->ops && pci->ops->start_link) {
> +		ret = dw_pcie_wait_for_link(pci);
>  		if (ret)
> -			goto err_remove_edma;
> +			goto err_stop_link;
>  	}
>  
> -	/* Ignore errors, the link may come up later */
> -	dw_pcie_wait_for_link(pci);
> -
>  	bridge->sysdata = pp;
>  
>  	ret = pci_host_probe(bridge);
> diff --git a/drivers/pci/controller/dwc/pcie-designware.c b/drivers/pci/controller/dwc/pcie-designware.c
> index 53a16b8b6ac2..03748a8dffd3 100644
> --- a/drivers/pci/controller/dwc/pcie-designware.c
> +++ b/drivers/pci/controller/dwc/pcie-designware.c
> @@ -644,9 +644,20 @@ void dw_pcie_disable_atu(struct dw_pcie *pci, u32 dir, int index)
>  	dw_pcie_writel_atu(pci, dir, index, PCIE_ATU_REGION_CTRL2, 0);
>  }
>  
> -int dw_pcie_wait_for_link(struct dw_pcie *pci)
> +void dw_pcie_print_link_status(struct dw_pcie *pci)
>  {
>  	u32 offset, val;
> +
> +	offset = dw_pcie_find_capability(pci, PCI_CAP_ID_EXP);
> +	val = dw_pcie_readw_dbi(pci, offset + PCI_EXP_LNKSTA);
> +
> +	dev_info(pci->dev, "PCIe Gen.%u x%u link up\n",
> +		 FIELD_GET(PCI_EXP_LNKSTA_CLS, val),
> +		 FIELD_GET(PCI_EXP_LNKSTA_NLW, val));
> +}
> +
> +int dw_pcie_wait_for_link(struct dw_pcie *pci)
> +{
>  	int retries;
>  
>  	/* Check if the link is up or not */
> @@ -662,12 +673,7 @@ int dw_pcie_wait_for_link(struct dw_pcie *pci)
>  		return -ETIMEDOUT;
>  	}
>  
> -	offset = dw_pcie_find_capability(pci, PCI_CAP_ID_EXP);
> -	val = dw_pcie_readw_dbi(pci, offset + PCI_EXP_LNKSTA);
> -
> -	dev_info(pci->dev, "PCIe Gen.%u x%u link up\n",
> -		 FIELD_GET(PCI_EXP_LNKSTA_CLS, val),
> -		 FIELD_GET(PCI_EXP_LNKSTA_NLW, val));
> +	dw_pcie_print_link_status(pci);
>  
>  	return 0;
>  }
> diff --git a/drivers/pci/controller/dwc/pcie-designware.h b/drivers/pci/controller/dwc/pcie-designware.h
> index 79713ce075cc..615660640801 100644
> --- a/drivers/pci/controller/dwc/pcie-designware.h
> +++ b/drivers/pci/controller/dwc/pcie-designware.h
> @@ -429,6 +429,7 @@ void dw_pcie_setup(struct dw_pcie *pci);
>  void dw_pcie_iatu_detect(struct dw_pcie *pci);
>  int dw_pcie_edma_detect(struct dw_pcie *pci);
>  void dw_pcie_edma_remove(struct dw_pcie *pci);
> +void dw_pcie_print_link_status(struct dw_pcie *pci);
>  
>  static inline void dw_pcie_writel_dbi(struct dw_pcie *pci, u32 reg, u32 val)
>  {
> 
> -- 
> To unsubscribe from this group and stop receiving emails from it, send an email to kernel-team+unsubscribe@android.com.
> 

Thanks Ajay for the follow-up patch! I've tested it out on a Pixel 6 and
it's working as intended for me. Probing the PCIe RC device now only
take 0.02s vs ~1.02s. If others don't object, please send it as a v3
patch.

Thanks,
Will

      reply	other threads:[~2023-04-07 17:41 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-02-27 20:13 [PATCH v2] PCI: dwc: Wait for link up only if link is started Sajid Dalvi
2023-02-28 22:04 ` Han Jingoo
2023-03-01  4:36   ` Sajid Dalvi
2023-03-16 23:05     ` Sajid Dalvi
2023-04-05 13:24       ` Lorenzo Pieralisi
2023-04-05 18:27         ` Bjorn Helgaas
2023-04-05 18:58           ` William McVicker
2023-04-05 19:23             ` William McVicker
2023-04-06  3:50               ` Ajay Agarwal
2023-04-06  9:10                 ` Ajay Agarwal
2023-04-07 17:40                   ` William McVicker [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=ZDBVcczqzte/0r4Q@google.com \
    --to=willmcvicker@google.com \
    --cc=ajayagarwal@google.com \
    --cc=bhelgaas@google.com \
    --cc=gustavo.pimentel@synopsys.com \
    --cc=helgaas@kernel.org \
    --cc=jingoohan1@gmail.com \
    --cc=kernel-team@android.com \
    --cc=krzysztof.kozlowski@linaro.org \
    --cc=kw@linux.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=lpieralisi@kernel.org \
    --cc=robh@kernel.org \
    --cc=sdalvi@google.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox