public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Yogesh Hegde <yogi.kernel@gmail.com>
To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	linux-staging@lists.linux.dev, linux-kernel@vger.kernel.org
Cc: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Subject: [PATCH] staging: rtl8192u: Remove functions rtl8192_wx_get_sens and rtl8192_wx_set_sens
Date: Thu, 13 Apr 2023 08:50:12 +0530	[thread overview]
Message-ID: <ZDd07Hgfe+Dxlus8@Zephyrus-G14> (raw)

Both of these functions depend on the function rf_set_sens, which is
declared but never defined. Hence calling this function will cause an
oops. Because there is no definition of the function, priv->rf_set_sens
will always be NULL.

As a result rtl8192_wx_set_sens and rtl8192_wx_get_sens will always
return -1.

Hence,
* Removed function definition rf_set_sens
* Removed usage of variable priv->rf_set_sens
* Removed functions rtl8192_wx_get_sens and rtl8192_wx_set_sens
* Cleaned up the variables sens and max_sens used in these functions

Suggested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>

Signed-off-by: Yogesh Hegde <yogi.kernel@gmail.com>
---
 drivers/staging/rtl8192u/r8192U.h    |  3 ---
 drivers/staging/rtl8192u/r8192U_wx.c | 40 ++--------------------------
 2 files changed, 2 insertions(+), 41 deletions(-)

diff --git a/drivers/staging/rtl8192u/r8192U.h b/drivers/staging/rtl8192u/r8192U.h
index ff0ada00bf41..7da15b03519c 100644
--- a/drivers/staging/rtl8192u/r8192U.h
+++ b/drivers/staging/rtl8192u/r8192U.h
@@ -842,8 +842,6 @@ typedef struct r8192_priv {
 
 	u16 irq_mask;
 	short chan;
-	short sens;
-	short max_sens;
 
 	short up;
 	/* If 1, allow bad crc frame, reception in monitor mode */
@@ -854,7 +852,6 @@ typedef struct r8192_priv {
 	enum rt_rf_type   rf_type;	    /* 0: 1T2R, 1: 2T4R */
 	RT_RF_TYPE_819xU rf_chip;
 
-	short (*rf_set_sens)(struct net_device *dev, short sens);
 	u8 (*rf_set_chan)(struct net_device *dev, u8 ch);
 	void (*rf_close)(struct net_device *dev);
 	void (*rf_init)(struct net_device *dev);
diff --git a/drivers/staging/rtl8192u/r8192U_wx.c b/drivers/staging/rtl8192u/r8192U_wx.c
index 203ea3bfc843..2852f79204c0 100644
--- a/drivers/staging/rtl8192u/r8192U_wx.c
+++ b/drivers/staging/rtl8192u/r8192U_wx.c
@@ -250,8 +250,6 @@ static int rtl8180_wx_get_range(struct net_device *dev,
 	/* range->old_num_channels; */
 	/* range->old_num_frequency; */
 	/* range->old_freq[6]; */ /* Filler to keep "version" at the same offset */
-	if (priv->rf_set_sens)
-		range->sensitivity = priv->max_sens;	/* signal level threshold range */
 
 	range->max_qual.qual = 100;
 	/* TODO: Find real max RSSI and stick here */
@@ -662,40 +660,6 @@ static int r8192_wx_get_retry(struct net_device *dev,
 	return 0;
 }
 
-static int r8192_wx_get_sens(struct net_device *dev,
-			     struct iw_request_info *info,
-			     union iwreq_data *wrqu, char *extra)
-{
-	struct r8192_priv *priv = ieee80211_priv(dev);
-
-	if (!priv->rf_set_sens)
-		return -1; /* we have not this support for this radio */
-	wrqu->sens.value = priv->sens;
-	return 0;
-}
-
-static int r8192_wx_set_sens(struct net_device *dev,
-			     struct iw_request_info *info,
-			     union iwreq_data *wrqu, char *extra)
-{
-	struct r8192_priv *priv = ieee80211_priv(dev);
-	short err = 0;
-
-	mutex_lock(&priv->wx_mutex);
-	if (!priv->rf_set_sens) {
-		err = -1; /* we have not this support for this radio */
-		goto exit;
-	}
-	if (priv->rf_set_sens(dev, wrqu->sens.value) == 0)
-		priv->sens = wrqu->sens.value;
-	else
-		err = -EINVAL;
-
-exit:
-	mutex_unlock(&priv->wx_mutex);
-
-	return err;
-}
 
 /* hw security need to reorganized. */
 static int r8192_wx_set_enc_ext(struct net_device *dev,
@@ -825,8 +789,8 @@ static iw_handler r8192_wx_handlers[] = {
 	r8192_wx_get_freq,        /* SIOCGIWFREQ */
 	r8192_wx_set_mode,        /* SIOCSIWMODE */
 	r8192_wx_get_mode,        /* SIOCGIWMODE */
-	r8192_wx_set_sens,        /* SIOCSIWSENS */
-	r8192_wx_get_sens,        /* SIOCGIWSENS */
+	NULL,                     /* SIOCSIWSENS */
+	NULL,                     /* SIOCGIWSENS */
 	NULL,                     /* SIOCSIWRANGE */
 	rtl8180_wx_get_range,	  /* SIOCGIWRANGE */
 	NULL,                     /* SIOCSIWPRIV */
-- 
2.34.1


             reply	other threads:[~2023-04-13  3:20 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-04-13  3:20 Yogesh Hegde [this message]
2023-04-15 15:55 ` [PATCH] staging: rtl8192u: Remove functions rtl8192_wx_get_sens and rtl8192_wx_set_sens Greg Kroah-Hartman

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=ZDd07Hgfe+Dxlus8@Zephyrus-G14 \
    --to=yogi.kernel@gmail.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-staging@lists.linux.dev \
    --cc=philipp.g.hortmann@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox