[PATCH v2 1/2] dt-bindings: gpio: Add STMPE YAML DT schema

Linus Walleij
2023-04-26T11:21:51Z

This adds a schema for the STMPE GPIO that while it is used a
lot in the kernel tree is anyway missing its bindings.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
ChangeLog v1->v2:
- New patch split off from the MFD patch.
---
.../devicetree/bindings/gpio/st,stmpe-gpio.yaml | 60 ++++++++++++++++++++++
1 file changed, 60 insertions(+)

diff --git a/Documentation/devicetree/bindings/gpio/st,stmpe-gpio.yaml b/Documentation/devicetree/bindings/gpio/st,stmpe-gpio.yaml
new file mode 100644
index 000000000000..6e991ebbdf77
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/st,stmpe-gpio.yaml
@@ -0,0 +1,60 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/st,stmpe-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectonics Port Expander (STMPE) GPIO Block
+
+description: STMicroelectronics Port Expander (STMPE) is a series of slow
+ bus controllers for various expanded peripherals such as GPIO, keypad,
+ touchscreen, ADC, PWM or rotator. It can contain one or several different
+ peripherals connected to SPI or I2C. These bindings pertain to the
+ GPIO portions of these expanders.
+
+maintainers:
+ - Linus Walleij <linus.walleij@linaro.org>
+
+properties:
+ compatible:
+ const: st,stmpe-gpio
+
+ "#gpio-cells":
+ const: 2
+
+ "#interrupt-cells":
+ const: 2
+
+ gpio-controller: true
+
+ interrupt-controller: true
+
+ st,norequest-mask:
+ description: A bitmask of GPIO lines that cannot be requested because for
+ for example not being connected to anything on the system
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+patternProperties:
+ "^.+-hog(-[0-9]+)?$":
+ type: object
+
+ properties:
+ gpio-hog: true
+ gpios: true
+ input: true
+ output-high: true
+ output-low: true
+ line-name: true
+
+ required:
+ - gpio-hog
+ - gpios
+
+additionalProperties: false
+
+required:
+ - compatible
+ - "#gpio-cells"
+ - "#interrupt-cells"
+ - gpio-controller
+ - interrupt-controller

--
2.34.1