From: andy.shevchenko@gmail.com
To: Astrid Rost <astrid.rost@axis.com>
Cc: "Jonathan Cameron" <jic23@kernel.org>,
"Lars-Peter Clausen" <lars@metafoo.de>,
linux-iio@vger.kernel.org, linux-kernel@vger.kernel.org,
kernel@axis.com,
"Uwe Kleine-König" <u.kleine-koenig@pengutronix.de>,
"Mathieu Othacehe" <m.othacehe@gmail.com>
Subject: Re: [PATCH v5 3/7] iio: light: vcnl4000: Add als_it for vcnl4040/4200
Date: Sat, 3 Jun 2023 15:15:57 +0300 [thread overview]
Message-ID: <ZHsu_T_0yBKLdcIu@surfacebook> (raw)
In-Reply-To: <20230530142405.1679146-4-astrid.rost@axis.com>
Tue, May 30, 2023 at 04:24:01PM +0200, Astrid Rost kirjoitti:
> Add illuminance integration time for vcnl4040 and vcnl4200.
> Add read/write attribute for illuminance integration time and read
> attribute for available integration times.
> Set scale and sampling rate according to the integration time.
...
> +static int vcnl4040_read_als_it(struct vcnl4000_data *data, int *val, int *val2)
> +{
> + int ret;
> +
> + ret = i2c_smbus_read_word_data(data->client, VCNL4200_AL_CONF);
> + if (ret < 0)
> + return ret;
> +
> + ret = FIELD_GET(VCNL4040_ALS_CONF_IT, ret);
> +
Redundant blank line.
> + if (ret >= data->chip_spec->num_als_it_times)
> + return -EINVAL;
> +
> + *val = (*data->chip_spec->als_it_times)[ret][0];
> + *val2 = (*data->chip_spec->als_it_times)[ret][1];
> +
> + return 0;
> +}
...
> +static ssize_t vcnl4040_write_als_it(struct vcnl4000_data *data, int val)
> +{
> + unsigned int i;
> + int ret, reg_val = -1;
> + u16 regval;
Besides confusing naming schema (two variables with only a _ difference)
unsigned int i;
u16 regval;
int ret;
> + for (i = 0; i < data->chip_spec->num_als_it_times; i++) {
> + if (val == (*data->chip_spec->als_it_times)[i][1]) {
> + reg_val = i;
Remove.
> + break;
> + }
> + }
> + if (reg_val < 0)
if (i == data->chip_spec->num_als_it_times)
> + return -EINVAL;
(1)
> + data->vcnl4200_al.sampling_rate = ktime_set(0, val * 1200);
> + data->al_scale = div_u64(mul_u32_u32(data->chip_spec->ulux_step,
> + (*data->chip_spec->als_it_times)[0][1]),
> + val);
> +
> + mutex_lock(&data->vcnl4000_lock);
> +
> + ret = i2c_smbus_read_word_data(data->client, VCNL4200_AL_CONF);
> + if (ret < 0)
> + goto out_unlock;
> +
> + regval = (ret & ~VCNL4040_ALS_CONF_IT) |
> + FIELD_PREP(VCNL4040_ALS_CONF_IT, reg_val);
Use temporary variable for this field,
u16 als_conf;
...See (1)...
als_conf = FIELD_PREP(..., i);
> + ret = i2c_smbus_write_word_data(data->client,
> + VCNL4200_AL_CONF,
> + regval);
> +
> +out_unlock:
> + mutex_unlock(&data->vcnl4000_lock);
> + return ret;
> +}
--
With Best Regards,
Andy Shevchenko
next prev parent reply other threads:[~2023-06-03 12:16 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-05-30 14:23 [PATCH v5 0/7] iio: light: vcnl4000: Add features for vncl4040/4200 Astrid Rost
2023-05-30 14:23 ` [PATCH v5 1/7] iio: light: vcnl4000: Add proximity irq for vcnl4200 Astrid Rost
2023-06-03 12:08 ` andy.shevchenko
2023-05-30 14:24 ` [PATCH v5 2/7] iio: light: vcnl4000: Add proximity ps_it " Astrid Rost
2023-06-03 12:09 ` andy.shevchenko
2023-05-30 14:24 ` [PATCH v5 3/7] iio: light: vcnl4000: Add als_it for vcnl4040/4200 Astrid Rost
2023-06-03 12:15 ` andy.shevchenko [this message]
2023-05-30 14:24 ` [PATCH v5 4/7] iio: light: vcnl4000: add illuminance irq vcnl4040/4200 Astrid Rost
2023-06-03 13:46 ` andy.shevchenko
2023-06-04 11:16 ` Jonathan Cameron
2023-05-30 14:24 ` [PATCH v5 5/7] iio: light: vcnl4000: Add period for vcnl4040/4200 Astrid Rost
2023-06-03 13:51 ` andy.shevchenko
2023-05-30 14:24 ` [PATCH v5 6/7] iio: light: vcnl4000: Add oversampling_ratio for 4040/4200 Astrid Rost
2023-06-03 13:51 ` andy.shevchenko
2023-05-30 14:24 ` [PATCH v5 7/7] iio: light: vcnl4000: Add calibration bias " Astrid Rost
2023-06-03 13:52 ` andy.shevchenko
2023-06-03 13:54 ` [PATCH v5 0/7] iio: light: vcnl4000: Add features for vncl4040/4200 andy.shevchenko
2023-06-04 11:20 ` Jonathan Cameron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ZHsu_T_0yBKLdcIu@surfacebook \
--to=andy.shevchenko@gmail.com \
--cc=astrid.rost@axis.com \
--cc=jic23@kernel.org \
--cc=kernel@axis.com \
--cc=lars@metafoo.de \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=m.othacehe@gmail.com \
--cc=u.kleine-koenig@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox