[PATCH 0/4] usb: misc: onboard_usb_hub: add support for Cypress HX3 USB 3.0 family

[PATCH 0/4] usb: misc: onboard_usb_hub: add support for Cypress HX3 USB 3.0 family

[Benjamin Bara]

Hi!

This series adds support for the Cypress HX3 USB 3.0 family (3/4). For
now, it just contains the USB-related aspects and ignores the option to
connect it via i2c (4/4).

For a better overview, the current entries are first re-ordered by VID
and then by PID (1/4).

As the HX3 family operates with two power supplies, multiple power
supply support is implemented (2/4).

Thanks & best regards,
Benjamin

---
Benjamin Bara (4):
      usb: misc: onboard-hub: resort by VID and PID
      usb: misc: onboard-hub: support multiple power supplies
      usb: misc: onboard-hub: add support for Cypress HX3 USB 3.0 family
      dt-bindings: usb: Add binding for Cypress HX3 USB 3.0 family

 .../devicetree/bindings/usb/cypress,hx3.yaml       | 77 ++++++++++++++++++++++
 drivers/usb/misc/onboard_usb_hub.c                 | 55 +++++++++++-----
 drivers/usb/misc/onboard_usb_hub.h                 | 16 +++--
 3 files changed, 128 insertions(+), 20 deletions(-)
---
base-commit: 45a3e24f65e90a047bef86f927ebdc4c710edaa1
change-id: 20230620-hx3-cb935b4fdd76

Best regards,
-- 
Benjamin Bara <benjamin.bara@skidata.com>

[PATCH 1/4] usb: misc: onboard-hub: resort by VID and PID

[Benjamin Bara]

From: Benjamin Bara <benjamin.bara@skidata.com>

Resort the existing entries by VID and then by PID to be able to find
entries easier.

Signed-off-by: Benjamin Bara <benjamin.bara@skidata.com>
---
 drivers/usb/misc/onboard_usb_hub.c | 12 ++++++------
 drivers/usb/misc/onboard_usb_hub.h |  8 ++++----
 2 files changed, 10 insertions(+), 10 deletions(-)

diff --git a/drivers/usb/misc/onboard_usb_hub.c b/drivers/usb/misc/onboard_usb_hub.c
index 12fc6eb67c3b..94006714c273 100644
--- a/drivers/usb/misc/onboard_usb_hub.c
+++ b/drivers/usb/misc/onboard_usb_hub.c
@@ -329,10 +329,10 @@ static struct platform_driver onboard_hub_driver = {
 
 /************************** USB driver **************************/
 
-#define VENDOR_ID_GENESYS	0x05e3
 #define VENDOR_ID_MICROCHIP	0x0424
-#define VENDOR_ID_REALTEK	0x0bda
 #define VENDOR_ID_TI		0x0451
+#define VENDOR_ID_GENESYS	0x05e3
+#define VENDOR_ID_REALTEK	0x0bda
 #define VENDOR_ID_VIA		0x2109
 
 /*
@@ -407,16 +407,16 @@ static void onboard_hub_usbdev_disconnect(struct usb_device *udev)
 }
 
 static const struct usb_device_id onboard_hub_id_table[] = {
-	{ USB_DEVICE(VENDOR_ID_GENESYS, 0x0608) }, /* Genesys Logic GL850G USB 2.0 */
-	{ USB_DEVICE(VENDOR_ID_GENESYS, 0x0610) }, /* Genesys Logic GL852G USB 2.0 */
 	{ USB_DEVICE(VENDOR_ID_MICROCHIP, 0x2514) }, /* USB2514B USB 2.0 */
 	{ USB_DEVICE(VENDOR_ID_MICROCHIP, 0x2517) }, /* USB2517 USB 2.0 */
+	{ USB_DEVICE(VENDOR_ID_TI, 0x8140) }, /* TI USB8041 3.0 */
+	{ USB_DEVICE(VENDOR_ID_TI, 0x8142) }, /* TI USB8041 2.0 */
+	{ USB_DEVICE(VENDOR_ID_GENESYS, 0x0608) }, /* Genesys Logic GL850G USB 2.0 */
+	{ USB_DEVICE(VENDOR_ID_GENESYS, 0x0610) }, /* Genesys Logic GL852G USB 2.0 */
 	{ USB_DEVICE(VENDOR_ID_REALTEK, 0x0411) }, /* RTS5411 USB 3.1 */
 	{ USB_DEVICE(VENDOR_ID_REALTEK, 0x5411) }, /* RTS5411 USB 2.1 */
 	{ USB_DEVICE(VENDOR_ID_REALTEK, 0x0414) }, /* RTS5414 USB 3.2 */
 	{ USB_DEVICE(VENDOR_ID_REALTEK, 0x5414) }, /* RTS5414 USB 2.1 */
-	{ USB_DEVICE(VENDOR_ID_TI, 0x8140) }, /* TI USB8041 3.0 */
-	{ USB_DEVICE(VENDOR_ID_TI, 0x8142) }, /* TI USB8041 2.0 */
 	{ USB_DEVICE(VENDOR_ID_VIA, 0x0817) }, /* VIA VL817 3.1 */
 	{ USB_DEVICE(VENDOR_ID_VIA, 0x2817) }, /* VIA VL817 2.0 */
 	{}
diff --git a/drivers/usb/misc/onboard_usb_hub.h b/drivers/usb/misc/onboard_usb_hub.h
index aca5f50eb0da..ff8925aa6d3a 100644
--- a/drivers/usb/misc/onboard_usb_hub.h
+++ b/drivers/usb/misc/onboard_usb_hub.h
@@ -14,10 +14,6 @@ static const struct onboard_hub_pdata microchip_usb424_data = {
 	.reset_us = 1,
 };
 
-static const struct onboard_hub_pdata realtek_rts5411_data = {
-	.reset_us = 0,
-};
-
 static const struct onboard_hub_pdata ti_tusb8041_data = {
 	.reset_us = 3000,
 };
@@ -30,6 +26,10 @@ static const struct onboard_hub_pdata genesys_gl852g_data = {
 	.reset_us = 50,
 };
 
+static const struct onboard_hub_pdata realtek_rts5411_data = {
+	.reset_us = 0,
+};
+
 static const struct onboard_hub_pdata vialab_vl817_data = {
 	.reset_us = 10,
 };

-- 
2.34.1

Re: [PATCH 1/4] usb: misc: onboard-hub: resort by VID and PID

[Matthias Kaehlcke]

On Wed, Jun 21, 2023 at 12:38:00PM +0200, Benjamin Bara wrote:
> From: Benjamin Bara <benjamin.bara@skidata.com>
> 
> Resort the existing entries by VID and then by PID to be able to find
> entries easier.

I don't think it actually makes it easier. In both the 'onboard_hub_id_table'
and the list of 'onboard_hub_pdata' the numerical VID isn't even visible
because the 'VENDOR_ID_*' constant is used, so the ordering becomes arbitrary
for a human reader, at least for the 99.9% who doesn't know all the VIDs by
heart.

For the 'VENDOR_ID_*' list one can argue in either way. My POV is that a
reader sees the name of the constant first, therefore the list should be
ordered by name. For the occasional case that a new hub model is added it
shouldn't be too hard to search the file for the VID to check if it already
exists.

> Signed-off-by: Benjamin Bara <benjamin.bara@skidata.com>
> ---
>  drivers/usb/misc/onboard_usb_hub.c | 12 ++++++------
>  drivers/usb/misc/onboard_usb_hub.h |  8 ++++----
>  2 files changed, 10 insertions(+), 10 deletions(-)
> 
> diff --git a/drivers/usb/misc/onboard_usb_hub.c b/drivers/usb/misc/onboard_usb_hub.c
> index 12fc6eb67c3b..94006714c273 100644
> --- a/drivers/usb/misc/onboard_usb_hub.c
> +++ b/drivers/usb/misc/onboard_usb_hub.c
> @@ -329,10 +329,10 @@ static struct platform_driver onboard_hub_driver = {
>  
>  /************************** USB driver **************************/
>  
> -#define VENDOR_ID_GENESYS	0x05e3
>  #define VENDOR_ID_MICROCHIP	0x0424
> -#define VENDOR_ID_REALTEK	0x0bda
>  #define VENDOR_ID_TI		0x0451
> +#define VENDOR_ID_GENESYS	0x05e3
> +#define VENDOR_ID_REALTEK	0x0bda
>  #define VENDOR_ID_VIA		0x2109
>  
>  /*
> @@ -407,16 +407,16 @@ static void onboard_hub_usbdev_disconnect(struct usb_device *udev)
>  }
>  
>  static const struct usb_device_id onboard_hub_id_table[] = {
> -	{ USB_DEVICE(VENDOR_ID_GENESYS, 0x0608) }, /* Genesys Logic GL850G USB 2.0 */
> -	{ USB_DEVICE(VENDOR_ID_GENESYS, 0x0610) }, /* Genesys Logic GL852G USB 2.0 */
>  	{ USB_DEVICE(VENDOR_ID_MICROCHIP, 0x2514) }, /* USB2514B USB 2.0 */
>  	{ USB_DEVICE(VENDOR_ID_MICROCHIP, 0x2517) }, /* USB2517 USB 2.0 */
> +	{ USB_DEVICE(VENDOR_ID_TI, 0x8140) }, /* TI USB8041 3.0 */
> +	{ USB_DEVICE(VENDOR_ID_TI, 0x8142) }, /* TI USB8041 2.0 */
> +	{ USB_DEVICE(VENDOR_ID_GENESYS, 0x0608) }, /* Genesys Logic GL850G USB 2.0 */
> +	{ USB_DEVICE(VENDOR_ID_GENESYS, 0x0610) }, /* Genesys Logic GL852G USB 2.0 */
>  	{ USB_DEVICE(VENDOR_ID_REALTEK, 0x0411) }, /* RTS5411 USB 3.1 */
>  	{ USB_DEVICE(VENDOR_ID_REALTEK, 0x5411) }, /* RTS5411 USB 2.1 */
>  	{ USB_DEVICE(VENDOR_ID_REALTEK, 0x0414) }, /* RTS5414 USB 3.2 */
>  	{ USB_DEVICE(VENDOR_ID_REALTEK, 0x5414) }, /* RTS5414 USB 2.1 */
> -	{ USB_DEVICE(VENDOR_ID_TI, 0x8140) }, /* TI USB8041 3.0 */
> -	{ USB_DEVICE(VENDOR_ID_TI, 0x8142) }, /* TI USB8041 2.0 */
>  	{ USB_DEVICE(VENDOR_ID_VIA, 0x0817) }, /* VIA VL817 3.1 */
>  	{ USB_DEVICE(VENDOR_ID_VIA, 0x2817) }, /* VIA VL817 2.0 */
>  	{}
> diff --git a/drivers/usb/misc/onboard_usb_hub.h b/drivers/usb/misc/onboard_usb_hub.h
> index aca5f50eb0da..ff8925aa6d3a 100644
> --- a/drivers/usb/misc/onboard_usb_hub.h
> +++ b/drivers/usb/misc/onboard_usb_hub.h
> @@ -14,10 +14,6 @@ static const struct onboard_hub_pdata microchip_usb424_data = {
>  	.reset_us = 1,
>  };
>  
> -static const struct onboard_hub_pdata realtek_rts5411_data = {
> -	.reset_us = 0,
> -};
> -
>  static const struct onboard_hub_pdata ti_tusb8041_data = {
>  	.reset_us = 3000,
>  };
> @@ -30,6 +26,10 @@ static const struct onboard_hub_pdata genesys_gl852g_data = {
>  	.reset_us = 50,
>  };
>  
> +static const struct onboard_hub_pdata realtek_rts5411_data = {
> +	.reset_us = 0,
> +};
> +
>  static const struct onboard_hub_pdata vialab_vl817_data = {
>  	.reset_us = 10,
>  };
> 
> -- 
> 2.34.1
> 

Re: [PATCH 1/4] usb: misc: onboard-hub: resort by VID and PID

[Greg Kroah-Hartman]

On Wed, Jun 21, 2023 at 12:38:00PM +0200, Benjamin Bara wrote:
> From: Benjamin Bara <benjamin.bara@skidata.com>
> 
> Resort the existing entries by VID and then by PID to be able to find
> entries easier.
> 
> Signed-off-by: Benjamin Bara <benjamin.bara@skidata.com>
> ---
>  drivers/usb/misc/onboard_usb_hub.c | 12 ++++++------
>  drivers/usb/misc/onboard_usb_hub.h |  8 ++++----
>  2 files changed, 10 insertions(+), 10 deletions(-)
> 
> diff --git a/drivers/usb/misc/onboard_usb_hub.c b/drivers/usb/misc/onboard_usb_hub.c
> index 12fc6eb67c3b..94006714c273 100644
> --- a/drivers/usb/misc/onboard_usb_hub.c
> +++ b/drivers/usb/misc/onboard_usb_hub.c
> @@ -329,10 +329,10 @@ static struct platform_driver onboard_hub_driver = {
>  
>  /************************** USB driver **************************/
>  
> -#define VENDOR_ID_GENESYS	0x05e3
>  #define VENDOR_ID_MICROCHIP	0x0424
> -#define VENDOR_ID_REALTEK	0x0bda
>  #define VENDOR_ID_TI		0x0451
> +#define VENDOR_ID_GENESYS	0x05e3
> +#define VENDOR_ID_REALTEK	0x0bda
>  #define VENDOR_ID_VIA		0x2109

This is fine, but:

>  
>  /*
> @@ -407,16 +407,16 @@ static void onboard_hub_usbdev_disconnect(struct usb_device *udev)
>  }
>  
>  static const struct usb_device_id onboard_hub_id_table[] = {
> -	{ USB_DEVICE(VENDOR_ID_GENESYS, 0x0608) }, /* Genesys Logic GL850G USB 2.0 */
> -	{ USB_DEVICE(VENDOR_ID_GENESYS, 0x0610) }, /* Genesys Logic GL852G USB 2.0 */
>  	{ USB_DEVICE(VENDOR_ID_MICROCHIP, 0x2514) }, /* USB2514B USB 2.0 */
>  	{ USB_DEVICE(VENDOR_ID_MICROCHIP, 0x2517) }, /* USB2517 USB 2.0 */
> +	{ USB_DEVICE(VENDOR_ID_TI, 0x8140) }, /* TI USB8041 3.0 */
> +	{ USB_DEVICE(VENDOR_ID_TI, 0x8142) }, /* TI USB8041 2.0 */
> +	{ USB_DEVICE(VENDOR_ID_GENESYS, 0x0608) }, /* Genesys Logic GL850G USB 2.0 */
> +	{ USB_DEVICE(VENDOR_ID_GENESYS, 0x0610) }, /* Genesys Logic GL852G USB 2.0 */
>  	{ USB_DEVICE(VENDOR_ID_REALTEK, 0x0411) }, /* RTS5411 USB 3.1 */
>  	{ USB_DEVICE(VENDOR_ID_REALTEK, 0x5411) }, /* RTS5411 USB 2.1 */
>  	{ USB_DEVICE(VENDOR_ID_REALTEK, 0x0414) }, /* RTS5414 USB 3.2 */
>  	{ USB_DEVICE(VENDOR_ID_REALTEK, 0x5414) }, /* RTS5414 USB 2.1 */
> -	{ USB_DEVICE(VENDOR_ID_TI, 0x8140) }, /* TI USB8041 3.0 */
> -	{ USB_DEVICE(VENDOR_ID_TI, 0x8142) }, /* TI USB8041 2.0 */
>  	{ USB_DEVICE(VENDOR_ID_VIA, 0x0817) }, /* VIA VL817 3.1 */
>  	{ USB_DEVICE(VENDOR_ID_VIA, 0x2817) }, /* VIA VL817 2.0 */
>  	{}

This does nothing except make backports harder over time :(



> diff --git a/drivers/usb/misc/onboard_usb_hub.h b/drivers/usb/misc/onboard_usb_hub.h
> index aca5f50eb0da..ff8925aa6d3a 100644
> --- a/drivers/usb/misc/onboard_usb_hub.h
> +++ b/drivers/usb/misc/onboard_usb_hub.h
> @@ -14,10 +14,6 @@ static const struct onboard_hub_pdata microchip_usb424_data = {
>  	.reset_us = 1,
>  };
>  
> -static const struct onboard_hub_pdata realtek_rts5411_data = {
> -	.reset_us = 0,
> -};
> -
>  static const struct onboard_hub_pdata ti_tusb8041_data = {
>  	.reset_us = 3000,
>  };
> @@ -30,6 +26,10 @@ static const struct onboard_hub_pdata genesys_gl852g_data = {
>  	.reset_us = 50,
>  };
>  
> +static const struct onboard_hub_pdata realtek_rts5411_data = {
> +	.reset_us = 0,
> +};

And this also does nothing to help really, so it's not needed, sorry.

thanks,

greg k-h

Re: [PATCH 1/4] usb: misc: onboard-hub: resort by VID and PID

[Benjamin Bara]

Hi,

On Wed, 21 Jun 2023 at 17:59, Greg Kroah-Hartman <gregkh@linuxfoundation.org> wrote:
> This does nothing except make backports harder over time :(
>
> And this also does nothing to help really, so it's not needed, sorry.

thanks for the feedback, I already dropped it and sent out v3[1].

Sorry for the inconvenience.

br,
Benjamin

[1] https://lore.kernel.org/lkml/20230620-hx3-v3-0-2acbc03ca949@skidata.com/

[PATCH 2/4] usb: misc: onboard-hub: support multiple power supplies

[Benjamin Bara]

From: Benjamin Bara <benjamin.bara@skidata.com>

As some of the onboard hubs require multiple power supplies, provide the
environment to support them.

Signed-off-by: Benjamin Bara <benjamin.bara@skidata.com>
---
 drivers/usb/misc/onboard_usb_hub.c | 40 ++++++++++++++++++++++++++++----------
 drivers/usb/misc/onboard_usb_hub.h |  1 +
 2 files changed, 31 insertions(+), 10 deletions(-)

diff --git a/drivers/usb/misc/onboard_usb_hub.c b/drivers/usb/misc/onboard_usb_hub.c
index 94006714c273..79ba9d8a8fef 100644
--- a/drivers/usb/misc/onboard_usb_hub.c
+++ b/drivers/usb/misc/onboard_usb_hub.c
@@ -27,6 +27,12 @@
 
 #include "onboard_usb_hub.h"
 
+#define SUPPLIES_NUM_MAX 2
+static const char * const supply_names[] = {
+	"vdd",
+	"vdd2",
+};
+
 static void onboard_hub_attach_usb_driver(struct work_struct *work);
 
 static struct usb_device_driver onboard_hub_usbdev_driver;
@@ -40,7 +46,8 @@ struct usbdev_node {
 };
 
 struct onboard_hub {
-	struct regulator *vdd;
+	struct regulator_bulk_data supplies[SUPPLIES_NUM_MAX];
+	unsigned int supplies_num;
 	struct device *dev;
 	const struct onboard_hub_pdata *pdata;
 	struct gpio_desc *reset_gpio;
@@ -55,9 +62,9 @@ static int onboard_hub_power_on(struct onboard_hub *hub)
 {
 	int err;
 
-	err = regulator_enable(hub->vdd);
-	if (err) {
-		dev_err(hub->dev, "failed to enable regulator: %d\n", err);
+	err = regulator_bulk_enable(hub->supplies_num, hub->supplies);
+	if (err != 0) {
+		dev_err(hub->dev, "failed to enable supplies: %d\n", err);
 		return err;
 	}
 
@@ -75,9 +82,9 @@ static int onboard_hub_power_off(struct onboard_hub *hub)
 
 	gpiod_set_value_cansleep(hub->reset_gpio, 1);
 
-	err = regulator_disable(hub->vdd);
-	if (err) {
-		dev_err(hub->dev, "failed to disable regulator: %d\n", err);
+	err = regulator_bulk_disable(hub->supplies_num, hub->supplies);
+	if (err != 0) {
+		dev_err(hub->dev, "failed to disable supplies: %d\n", err);
 		return err;
 	}
 
@@ -232,6 +239,7 @@ static int onboard_hub_probe(struct platform_device *pdev)
 	const struct of_device_id *of_id;
 	struct device *dev = &pdev->dev;
 	struct onboard_hub *hub;
+	unsigned int i;
 	int err;
 
 	hub = devm_kzalloc(dev, sizeof(*hub), GFP_KERNEL);
@@ -246,9 +254,21 @@ static int onboard_hub_probe(struct platform_device *pdev)
 	if (!hub->pdata)
 		return -EINVAL;
 
-	hub->vdd = devm_regulator_get(dev, "vdd");
-	if (IS_ERR(hub->vdd))
-		return PTR_ERR(hub->vdd);
+	if (hub->pdata->supplies_num > SUPPLIES_NUM_MAX)
+		return dev_err_probe(dev, -EINVAL, "max %d supplies supported!\n",
+				     SUPPLIES_NUM_MAX);
+	hub->supplies_num = 1;
+	if (hub->pdata->supplies_num > 1)
+		hub->supplies_num = hub->pdata->supplies_num;
+
+	for (i = 0; i < SUPPLIES_NUM_MAX; i++)
+		hub->supplies[i].supply = supply_names[i];
+
+	err = devm_regulator_bulk_get(dev, hub->supplies_num, hub->supplies);
+	if (err) {
+		dev_err(dev, "Failed to get regulator supplies: %d\n", err);
+		return err;
+	}
 
 	hub->reset_gpio = devm_gpiod_get_optional(dev, "reset",
 						  GPIOD_OUT_HIGH);
diff --git a/drivers/usb/misc/onboard_usb_hub.h b/drivers/usb/misc/onboard_usb_hub.h
index ff8925aa6d3a..955aaaf1c31c 100644
--- a/drivers/usb/misc/onboard_usb_hub.h
+++ b/drivers/usb/misc/onboard_usb_hub.h
@@ -8,6 +8,7 @@
 
 struct onboard_hub_pdata {
 	unsigned long reset_us;		/* reset pulse width in us */
+	unsigned int supplies_num;	/* num of supplies: 0 considered as 1 */
 };
 
 static const struct onboard_hub_pdata microchip_usb424_data = {

-- 
2.34.1

[PATCH 3/4] usb: misc: onboard-hub: add support for Cypress HX3 USB 3.0 family

[Benjamin Bara]

From: Benjamin Bara <benjamin.bara@skidata.com>

The HX3 comes in different variants (up to 4 USB 3.0 ports; multi-TT),
e.g. CYUSB330x/CYUSB331x/CYUSB332x/CYUSB230x. It operates with two
different power supplies: 1V2 and 3V3.

Add the support for this hub, for controlling the reset pin and the
power supplies.

Reset time is extracted from data sheet, page 24:
"The RESETN pin can be tied to VDD_IO through an external resistor and
to ground (GND) through an external capacitor (minimum 5 ms time
constant)."
V_IH min is given at 0.7 * 3V3 (page 34), therefore use 10ms.

Also add USB PIDs for the USB 2.0 and USB 3.0 root hub.

Signed-off-by: Benjamin Bara <benjamin.bara@skidata.com>
---
 drivers/usb/misc/onboard_usb_hub.c | 3 +++
 drivers/usb/misc/onboard_usb_hub.h | 7 +++++++
 2 files changed, 10 insertions(+)

diff --git a/drivers/usb/misc/onboard_usb_hub.c b/drivers/usb/misc/onboard_usb_hub.c
index 79ba9d8a8fef..1275736637ed 100644
--- a/drivers/usb/misc/onboard_usb_hub.c
+++ b/drivers/usb/misc/onboard_usb_hub.c
@@ -351,6 +351,7 @@ static struct platform_driver onboard_hub_driver = {
 
 #define VENDOR_ID_MICROCHIP	0x0424
 #define VENDOR_ID_TI		0x0451
+#define VENDOR_ID_CYPRESS	0x04b4
 #define VENDOR_ID_GENESYS	0x05e3
 #define VENDOR_ID_REALTEK	0x0bda
 #define VENDOR_ID_VIA		0x2109
@@ -431,6 +432,8 @@ static const struct usb_device_id onboard_hub_id_table[] = {
 	{ USB_DEVICE(VENDOR_ID_MICROCHIP, 0x2517) }, /* USB2517 USB 2.0 */
 	{ USB_DEVICE(VENDOR_ID_TI, 0x8140) }, /* TI USB8041 3.0 */
 	{ USB_DEVICE(VENDOR_ID_TI, 0x8142) }, /* TI USB8041 2.0 */
+	{ USB_DEVICE(VENDOR_ID_CYPRESS, 0x6504) }, /* CYUSB33{0,1,2}x/CYUSB230x 3.0 */
+	{ USB_DEVICE(VENDOR_ID_CYPRESS, 0x6506) }, /* CYUSB33{0,1,2}x/CYUSB230x 2.0 */
 	{ USB_DEVICE(VENDOR_ID_GENESYS, 0x0608) }, /* Genesys Logic GL850G USB 2.0 */
 	{ USB_DEVICE(VENDOR_ID_GENESYS, 0x0610) }, /* Genesys Logic GL852G USB 2.0 */
 	{ USB_DEVICE(VENDOR_ID_REALTEK, 0x0411) }, /* RTS5411 USB 3.1 */
diff --git a/drivers/usb/misc/onboard_usb_hub.h b/drivers/usb/misc/onboard_usb_hub.h
index 955aaaf1c31c..551221f02cff 100644
--- a/drivers/usb/misc/onboard_usb_hub.h
+++ b/drivers/usb/misc/onboard_usb_hub.h
@@ -19,6 +19,11 @@ static const struct onboard_hub_pdata ti_tusb8041_data = {
 	.reset_us = 3000,
 };
 
+static const struct onboard_hub_pdata cypress_hx3_data = {
+	.reset_us = 10000,
+	.supplies_num = 2,
+};
+
 static const struct onboard_hub_pdata genesys_gl850g_data = {
 	.reset_us = 3,
 };
@@ -40,6 +45,8 @@ static const struct of_device_id onboard_hub_match[] = {
 	{ .compatible = "usb424,2517", .data = &microchip_usb424_data, },
 	{ .compatible = "usb451,8140", .data = &ti_tusb8041_data, },
 	{ .compatible = "usb451,8142", .data = &ti_tusb8041_data, },
+	{ .compatible = "usb4b4,6504", .data = &cypress_hx3_data, },
+	{ .compatible = "usb4b4,6506", .data = &cypress_hx3_data, },
 	{ .compatible = "usb5e3,608", .data = &genesys_gl850g_data, },
 	{ .compatible = "usb5e3,610", .data = &genesys_gl852g_data, },
 	{ .compatible = "usbbda,411", .data = &realtek_rts5411_data, },

-- 
2.34.1

[PATCH 4/4] dt-bindings: usb: Add binding for Cypress HX3 USB 3.0 family

[Benjamin Bara]

From: Benjamin Bara <benjamin.bara@skidata.com>

The HX3 family comes in different variants (up to 4 USB 3.0 ports;
multi-TT), e.g. CYUSB330x/CYUSB331x/CYUSB332x/CYUSB230x.

This initial version of the binding only describes USB related aspects
of the HX3 family, it does not cover the option of connecting the
controller as an i2c slave.

Signed-off-by: Benjamin Bara <benjamin.bara@skidata.com>
---
 .../devicetree/bindings/usb/cypress,hx3.yaml       | 77 ++++++++++++++++++++++
 1 file changed, 77 insertions(+)

diff --git a/Documentation/devicetree/bindings/usb/cypress,hx3.yaml b/Documentation/devicetree/bindings/usb/cypress,hx3.yaml
new file mode 100644
index 000000000000..47add0d85fb8
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/cypress,hx3.yaml
@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/cypress,hx3.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cypress HX3 USB 3.0 hub controller family
+
+maintainers:
+  - Benjamin Bara <benjamin.bara@skidata.com>
+
+allOf:
+  - $ref: usb-device.yaml#
+
+properties:
+  compatible:
+    enum:
+      - usb4b4,6504
+      - usb4b4,6506
+
+  reg: true
+
+  reset-gpios:
+    items:
+      - description: GPIO specifier for RESETN pin.
+
+  vdd-supply:
+    description:
+      1V2 power supply (VDD_EFUSE, AVDD12, DVDD12).
+
+  vdd2-supply:
+    description:
+      3V3 power supply (AVDD33, VDD_IO).
+
+  peer-hub:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      phandle to the peer hub on the controller.
+
+required:
+  - compatible
+  - reg
+  - peer-hub
+  - vdd-supply
+  - vdd2-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    usb {
+        dr_mode = "host";
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        /* 2.0 hub on port 1 */
+        hub_2_0: hub@1 {
+          compatible = "usb4b4,6504";
+          reg = <1>;
+          peer-hub = <&hub_3_0>;
+          reset-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
+          vdd-supply = <&reg_1v2_usb>;
+          vdd2-supply = <&reg_3v3_usb>;
+        };
+
+        /* 3.0 hub on port 2 */
+        hub_3_0: hub@2 {
+          compatible = "usb4b4,6506";
+          reg = <2>;
+          peer-hub = <&hub_2_0>;
+          reset-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
+          vdd-supply = <&reg_1v2_usb>;
+          vdd2-supply = <&reg_3v3_usb>;
+        };
+    };

-- 
2.34.1

[PATCH 0/4] usb: misc: onboard_usb_hub: add support for Cypress HX3 USB 3.0 family

[Benjamin Bara]

Hi!

This series adds support for the Cypress HX3 USB 3.0 family (3/4). For
now, it just contains the USB-related aspects and ignores the option to
connect it via i2c (4/4).

For a better overview, the current entries are first re-ordered by VID
and then by PID (1/4).

As the HX3 family operates with two power supplies, multiple power
supply support is implemented (2/4).

Thanks & best regards,
Benjamin

---
Benjamin Bara (4):
      usb: misc: onboard-hub: resort by VID and PID
      usb: misc: onboard-hub: support multiple power supplies
      usb: misc: onboard-hub: add support for Cypress HX3 USB 3.0 family
      dt-bindings: usb: Add binding for Cypress HX3 USB 3.0 family

 .../devicetree/bindings/usb/cypress,hx3.yaml       | 77 ++++++++++++++++++++++
 drivers/usb/misc/onboard_usb_hub.c                 | 55 +++++++++++-----
 drivers/usb/misc/onboard_usb_hub.h                 | 16 +++--
 3 files changed, 128 insertions(+), 20 deletions(-)
---
base-commit: 45a3e24f65e90a047bef86f927ebdc4c710edaa1
change-id: 20230620-hx3-cb935b4fdd76

Best regards,
-- 
Benjamin Bara <benjamin.bara@skidata.com>

[PATCH 1/4] usb: misc: onboard-hub: resort by VID and PID

[Benjamin Bara]

From: Benjamin Bara <benjamin.bara@skidata.com>

Resort the existing entries by VID and then by PID to be able to find
entries easier.

Signed-off-by: Benjamin Bara <benjamin.bara@skidata.com>
---
 drivers/usb/misc/onboard_usb_hub.c | 12 ++++++------
 drivers/usb/misc/onboard_usb_hub.h |  8 ++++----
 2 files changed, 10 insertions(+), 10 deletions(-)

diff --git a/drivers/usb/misc/onboard_usb_hub.c b/drivers/usb/misc/onboard_usb_hub.c
index 12fc6eb67c3b..94006714c273 100644
--- a/drivers/usb/misc/onboard_usb_hub.c
+++ b/drivers/usb/misc/onboard_usb_hub.c
@@ -329,10 +329,10 @@ static struct platform_driver onboard_hub_driver = {
 
 /************************** USB driver **************************/
 
-#define VENDOR_ID_GENESYS	0x05e3
 #define VENDOR_ID_MICROCHIP	0x0424
-#define VENDOR_ID_REALTEK	0x0bda
 #define VENDOR_ID_TI		0x0451
+#define VENDOR_ID_GENESYS	0x05e3
+#define VENDOR_ID_REALTEK	0x0bda
 #define VENDOR_ID_VIA		0x2109
 
 /*
@@ -407,16 +407,16 @@ static void onboard_hub_usbdev_disconnect(struct usb_device *udev)
 }
 
 static const struct usb_device_id onboard_hub_id_table[] = {
-	{ USB_DEVICE(VENDOR_ID_GENESYS, 0x0608) }, /* Genesys Logic GL850G USB 2.0 */
-	{ USB_DEVICE(VENDOR_ID_GENESYS, 0x0610) }, /* Genesys Logic GL852G USB 2.0 */
 	{ USB_DEVICE(VENDOR_ID_MICROCHIP, 0x2514) }, /* USB2514B USB 2.0 */
 	{ USB_DEVICE(VENDOR_ID_MICROCHIP, 0x2517) }, /* USB2517 USB 2.0 */
+	{ USB_DEVICE(VENDOR_ID_TI, 0x8140) }, /* TI USB8041 3.0 */
+	{ USB_DEVICE(VENDOR_ID_TI, 0x8142) }, /* TI USB8041 2.0 */
+	{ USB_DEVICE(VENDOR_ID_GENESYS, 0x0608) }, /* Genesys Logic GL850G USB 2.0 */
+	{ USB_DEVICE(VENDOR_ID_GENESYS, 0x0610) }, /* Genesys Logic GL852G USB 2.0 */
 	{ USB_DEVICE(VENDOR_ID_REALTEK, 0x0411) }, /* RTS5411 USB 3.1 */
 	{ USB_DEVICE(VENDOR_ID_REALTEK, 0x5411) }, /* RTS5411 USB 2.1 */
 	{ USB_DEVICE(VENDOR_ID_REALTEK, 0x0414) }, /* RTS5414 USB 3.2 */
 	{ USB_DEVICE(VENDOR_ID_REALTEK, 0x5414) }, /* RTS5414 USB 2.1 */
-	{ USB_DEVICE(VENDOR_ID_TI, 0x8140) }, /* TI USB8041 3.0 */
-	{ USB_DEVICE(VENDOR_ID_TI, 0x8142) }, /* TI USB8041 2.0 */
 	{ USB_DEVICE(VENDOR_ID_VIA, 0x0817) }, /* VIA VL817 3.1 */
 	{ USB_DEVICE(VENDOR_ID_VIA, 0x2817) }, /* VIA VL817 2.0 */
 	{}
diff --git a/drivers/usb/misc/onboard_usb_hub.h b/drivers/usb/misc/onboard_usb_hub.h
index aca5f50eb0da..ff8925aa6d3a 100644
--- a/drivers/usb/misc/onboard_usb_hub.h
+++ b/drivers/usb/misc/onboard_usb_hub.h
@@ -14,10 +14,6 @@ static const struct onboard_hub_pdata microchip_usb424_data = {
 	.reset_us = 1,
 };
 
-static const struct onboard_hub_pdata realtek_rts5411_data = {
-	.reset_us = 0,
-};
-
 static const struct onboard_hub_pdata ti_tusb8041_data = {
 	.reset_us = 3000,
 };
@@ -30,6 +26,10 @@ static const struct onboard_hub_pdata genesys_gl852g_data = {
 	.reset_us = 50,
 };
 
+static const struct onboard_hub_pdata realtek_rts5411_data = {
+	.reset_us = 0,
+};
+
 static const struct onboard_hub_pdata vialab_vl817_data = {
 	.reset_us = 10,
 };

-- 
2.34.1