* Re: [Bug 217599] New: Adaptec 71605z hangs with aacraid: Host adapter abort request after update to linux 6.4.0
[not found] <bug-217599-11613@https.bugzilla.kernel.org/>
@ 2023-06-27 2:39 ` Bagas Sanjaya
0 siblings, 0 replies; only message in thread
From: Bagas Sanjaya @ 2023-06-27 2:39 UTC (permalink / raw)
To: bugzilla-daemon, Linux SCSI, Linux Kernel Mailing List,
Linux Regressions
Cc: Adaptec OEM Raid Solutions, James E.J. Bottomley,
Martin K. Petersen, pheidologeton
[-- Attachment #1: Type: text/plain, Size: 10634 bytes --]
[also Cc: aacraid and SCSI subsystem maintainers]
On Mon, Jun 26, 2023 at 10:36:13PM +0000, bugzilla-daemon@kernel.org wrote:
> https://bugzilla.kernel.org/show_bug.cgi?id=217599
>
> Bug ID: 217599
> Summary: Adaptec 71605z hangs with aacraid: Host adapter abort
> request after update to linux 6.4.0
> Product: SCSI Drivers
> Version: 2.5
> Hardware: All
> OS: Linux
> Status: NEW
> Severity: high
> Priority: P3
> Component: AACRAID
> Assignee: scsi_drivers-aacraid@kernel-bugs.osdl.org
> Reporter: pheidologeton@protonmail.com
> Regression: No
>
> The controller works fine for a few minutes. Then it hangs for a few tens of
> seconds to a few minutes, then also works normally for a while. This bug is
> present in the 6.4.0 kernel release (6.3.9 works without hanging)
> The messages in dmesg are as follows
>
> [ 287.137901] aacraid: Host adapter abort request.
> aacraid: Outstanding commands on (10,0,0,0):
> [ 287.137909] aacraid: Host adapter abort request.
> aacraid: Outstanding commands on (10,0,0,0):
> [ 287.137912] aacraid: Host adapter abort request.
> aacraid: Outstanding commands on (10,0,0,0):
> [ 287.137914] aacraid: Host adapter abort request.
> aacraid: Outstanding commands on (10,0,0,0):
> [ 287.137916] aacraid: Host adapter abort request.
> aacraid: Outstanding commands on (10,0,0,0):
> [ 287.137919] aacraid: Host adapter abort request.
> aacraid: Outstanding commands on (10,0,0,0):
> [ 287.137921] aacraid: Host adapter abort request.
> aacraid: Outstanding commands on (10,0,0,0):
> [ 287.137924] aacraid: Host adapter abort request.
> aacraid: Outstanding commands on (10,0,0,0):
> [ 287.137926] aacraid: Host adapter abort request.
> aacraid: Outstanding commands on (10,0,0,0):
> [ 287.137928] aacraid: Host adapter abort request.
> aacraid: Outstanding commands on (10,0,0,0):
> [ 287.137930] aacraid: Host adapter abort request.
> aacraid: Outstanding commands on (10,0,0,0):
> [ 287.137933] aacraid: Host adapter abort request.
> aacraid: Outstanding commands on (10,0,0,0):
> [ 287.137934] aacraid: Host adapter abort request.
> aacraid: Outstanding commands on (10,0,0,0):
> [ 287.137937] aacraid: Host adapter abort request.
> aacraid: Outstanding commands on (10,0,0,0):
> [ 287.137939] aacraid: Host adapter abort request.
> aacraid: Outstanding commands on (10,0,0,0):
> [ 287.137941] aacraid: Host adapter abort request.
> aacraid: Outstanding commands on (10,0,0,0):
> [ 287.137943] aacraid: Host adapter abort request.
> aacraid: Outstanding commands on (10,0,0,0):
> [ 287.137945] aacraid: Host adapter abort request.
> aacraid: Outstanding commands on (10,0,0,0):
> [ 287.137947] aacraid: Host adapter abort request.
> aacraid: Outstanding commands on (10,0,0,0):
> [ 287.137949] aacraid: Host adapter abort request.
> aacraid: Outstanding commands on (10,0,0,0):
> [ 287.137951] aacraid: Host adapter abort request.
> aacraid: Outstanding commands on (10,0,0,0):
> [ 287.137952] aacraid: Host adapter abort request.
> aacraid: Outstanding commands on (10,0,0,0):
> [ 287.137954] aacraid: Host adapter abort request.
> aacraid: Outstanding commands on (10,0,0,0):
> [ 287.137956] aacraid: Host adapter abort request.
> aacraid: Outstanding commands on (10,0,0,0):
> [ 287.137958] aacraid: Host adapter abort request.
> aacraid: Outstanding commands on (10,0,0,0):
> [ 287.137960] aacraid: Host adapter abort request.
> aacraid: Outstanding commands on (10,0,0,0):
> [ 287.137962] aacraid: Host adapter abort request.
> aacraid: Outstanding commands on (10,0,0,0):
> [ 287.137964] aacraid: Host adapter abort request.
> aacraid: Outstanding commands on (10,0,0,0):
> [ 287.137966] aacraid: Host adapter abort request.
> aacraid: Outstanding commands on (10,0,0,0):
> [ 287.137967] aacraid: Host adapter abort request.
> aacraid: Outstanding commands on (10,0,0,0):
> [ 287.137969] aacraid: Host adapter abort request.
> aacraid: Outstanding commands on (10,0,0,0):
> [ 287.137971] aacraid: Host adapter abort request.
> aacraid: Outstanding commands on (10,0,0,0):
> [ 287.157697] aacraid: Host bus reset request. SCSI hang ?
> [ 287.157706] aacraid 0000:02:00.0: outstanding cmd: midlevel-0
> [ 287.157708] aacraid 0000:02:00.0: outstanding cmd: lowlevel-0
> [ 287.157709] aacraid 0000:02:00.0: outstanding cmd: error handler-0
> [ 287.157711] aacraid 0000:02:00.0: outstanding cmd: firmware-32
> [ 287.157712] aacraid 0000:02:00.0: outstanding cmd: kernel-0
> [ 287.167040] aacraid 0000:02:00.0: Controller reset type is 3
> [ 287.167042] aacraid 0000:02:00.0: Issuing IOP reset
> [ 321.029712] aacraid 0000:02:00.0: IOP reset succeeded
> [ 321.066201] numacb=512 ignored
> [ 321.066843] aacraid: Comm Interface type2 enabled
> [ 344.845370] aacraid 0000:02:00.0: Scheduling bus rescan
> [ 358.294342] sd 10:0:0:0: [sda] Very big device. Trying to use READ
> CAPACITY(16).
> [ 442.109147] aacraid: Host adapter abort request.
> aacraid: Outstanding commands on (10,0,0,0):
> [ 442.109155] aacraid: Host adapter abort request.
> aacraid: Outstanding commands on (10,0,0,0):
> [ 442.109158] aacraid: Host adapter abort request.
> aacraid: Outstanding commands on (10,0,0,0):
> [ 442.109160] aacraid: Host adapter abort request.
> aacraid: Outstanding commands on (10,0,0,0):
> [ 442.109162] aacraid: Host adapter abort request.
> aacraid: Outstanding commands on (10,0,0,0):
> [ 442.109164] aacraid: Host adapter abort request.
> aacraid: Outstanding commands on (10,0,0,0):
> [ 442.109166] aacraid: Host adapter abort request.
> aacraid: Outstanding commands on (10,0,0,0):
> [ 442.109168] aacraid: Host adapter abort request.
> aacraid: Outstanding commands on (10,0,0,0):
> [ 442.109170] aacraid: Host adapter abort request.
> aacraid: Outstanding commands on (10,0,0,0):
> [ 442.109172] aacraid: Host adapter abort request.
> aacraid: Outstanding commands on (10,0,0,0):
> [ 442.109174] aacraid: Host adapter abort request.
> aacraid: Outstanding commands on (10,0,0,0):
> [ 442.109176] aacraid: Host adapter abort request.
> aacraid: Outstanding commands on (10,0,0,0):
> [ 442.109178] aacraid: Host adapter abort request.
> aacraid: Outstanding commands on (10,0,0,0):
> [ 442.109179] aacraid: Host adapter abort request.
> aacraid: Outstanding commands on (10,0,0,0):
> [ 442.109181] aacraid: Host adapter abort request.
> aacraid: Outstanding commands on (10,0,0,0):
> [ 442.109183] aacraid: Host adapter abort request.
> aacraid: Outstanding commands on (10,0,0,0):
> [ 442.109185] aacraid: Host adapter abort request.
> aacraid: Outstanding commands on (10,0,0,0):
> [ 442.109187] aacraid: Host adapter abort request.
> aacraid: Outstanding commands on (10,0,0,0):
> [ 442.109189] aacraid: Host adapter abort request.
> aacraid: Outstanding commands on (10,0,0,0):
> [ 442.109191] aacraid: Host adapter abort request.
> aacraid: Outstanding commands on (10,0,0,0):
> [ 442.109193] aacraid: Host adapter abort request.
> aacraid: Outstanding commands on (10,0,0,0):
> [ 442.109194] aacraid: Host adapter abort request.
> aacraid: Outstanding commands on (10,0,0,0):
> [ 442.109196] aacraid: Host adapter abort request.
> aacraid: Outstanding commands on (10,0,0,0):
> [ 442.109198] aacraid: Host adapter abort request.
> aacraid: Outstanding commands on (10,0,0,0):
> [ 442.109200] aacraid: Host adapter abort request.
> aacraid: Outstanding commands on (10,0,0,0):
> [ 442.109201] aacraid: Host adapter abort request.
> aacraid: Outstanding commands on (10,0,0,0):
> [ 442.109203] aacraid: Host adapter abort request.
> aacraid: Outstanding commands on (10,0,0,0):
> [ 442.109205] aacraid: Host adapter abort request.
> aacraid: Outstanding commands on (10,0,0,0):
> [ 442.109207] aacraid: Host adapter abort request.
> aacraid: Outstanding commands on (10,0,0,0):
> [ 442.109208] aacraid: Host adapter abort request.
> aacraid: Outstanding commands on (10,0,0,0):
> [ 442.109210] aacraid: Host adapter abort request.
> aacraid: Outstanding commands on (10,0,0,0):
> [ 442.137144] aacraid: Host adapter abort request.
> aacraid: Outstanding commands on (10,0,0,0):
> [ 442.154292] aacraid: Host bus reset request. SCSI hang ?
> [ 442.154302] aacraid 0000:02:00.0: outstanding cmd: midlevel-0
> [ 442.154305] aacraid 0000:02:00.0: outstanding cmd: lowlevel-0
> [ 442.154307] aacraid 0000:02:00.0: outstanding cmd: error handler-0
> [ 442.154308] aacraid 0000:02:00.0: outstanding cmd: firmware-32
> [ 442.154310] aacraid 0000:02:00.0: outstanding cmd: kernel-0
> [ 442.171131] aacraid 0000:02:00.0: Controller reset type is 3
> [ 442.171133] aacraid 0000:02:00.0: Issuing IOP reset
> [ 476.040983] aacraid 0000:02:00.0: IOP reset succeeded
> [ 476.078055] numacb=512 ignored
> [ 476.078606] aacraid: Comm Interface type2 enabled
> [ 494.747632] aacraid 0000:02:00.0: Scheduling bus rescan
> [ 507.896453] sd 10:0:0:0: [sda] Very big device. Trying to use READ
> CAPACITY(16).
>
Thanks for automatically forwarding Bugzilla report. I'm adding it to
regzbot to ensure it doesn't get fallen through cracks unnoticed:
#regzbot ^introduced: v6.3..v6.4
#regzbot title: Adaptec 71605z hangs with aacraid: Host adapter abort request after update
#regzbot monitor: https://bugzilla.kernel.org/show_bug.cgi?id=217599
--
An old man doll... just what I always wanted! - Clara
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]
^ permalink raw reply [flat|nested] only message in thread